DEEPCOOL 5V to 12V RGB Converter (Convertor) - 5V 3 pin | 12V 4 pin
HTML-код
- Опубликовано: 6 ноя 2020
- Please subscribe and join us.~~♥
✔ subscription channel on our RUclips : bit.ly/2KHb83
[Caution] This video is for demonstration purposes only and should be performed by a professional. We are not liable for the damage you may cause to your PC
Hello, everyone.
This video shows how to install RGB Converter, which transfers RGB Voltage 5V to 12V. This is the answer to the question for the largest portion of the RGB Fan video I've posted so far. A lot of people were asking if their motherboard fits the RGB. Some had no RGB headers and some had 12V headers. So I made this video for you guys. If you're watching this video and have a motherboard without a 5V RGB header, I hope you can solve it through this Converter.
If you want to buy it, please purchase it at the link below. Thanks for watching it.
🅿️ DEEPCOOL 5V to 12V RGB Converter: Link:
✅ Amazon US: amz.run/4Ssy
✅ Aliexpress(Worldwide): bityl.co/5bSw
🅿️ EZDIY-FAB RGB Converter Link: amz.run/4HGN
✅ Demo Hardware ✅
🅿️ M/B: MSI B450 PRO M - amz.run/3v9o
🅿️ Memory: Corsair Vengeance RGB Pro 16GB - amz.run/3v9s
🅿️ CPU: AMD Ryzen 5 2600X - amz.run/3v9t
🅿️ CPU Cooler: ID-COOLING SE-234-ARGB CPU Cooler: amz.run/3H2U
✅ RECORDING GEAR: ✅
🅿️ Panasonic Lumix DC-FZ80 4K: amz.run/3nfc
🅿️ Panasonic Lumix DC-ZS70 4k: amz.run/3nfe
🅿️ LED Video Light: geni.us/FYG5
🅿️ Motorized Video Slider Skater: amz.run/3nel
🅿️ Main Camera Slider Skater: amz.run/3ney
🅿️ Video Camera Tripod Fluid: amz.run/3nem
🅿️ Aluminum Portable Tripod: amz.run/3neo
🅿️ LED Video Light w 3 Cold Shoe: amz.run/3nep
🅿️ V-Shape Triple 3 Universal Cold Shoe Mount Bracket: amz.run/3ner
🅿️ DSLR Camera Tripod Ball Head: amz.run/3nes
🅿️ Camera Clamp Mount: amz.run/3neu
🅿️ Overhead for Lights/Camera Mounting Poles: amz.run/3nf4
🅿️ Camera Clamp Mount: amz.run/3neu
🅿️ Capture Card: amz.run/3nfX
This video is for introducing product purposes only and I am in no way affiliated with anyone caring or selling this product.
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
Please subscribe and join us.~~♥
✔ subscription channel on our RUclips : bit.ly/2KHb83 
Наука
Thank you so much for this video man, short video but meaty.
Thank you. I'm glad it was helpful.
YES I CAN FINALLY USE AURA SYNC ON MY DARKFLASH FANS HUB
Bro can you please tell me how can i use it
Thank you!!
Very helpful thank you
Just messed up and bought argb fans when my motherboard only supports RGB fans, I'll see if I should try and return the motherboard or instead use this converter
Good day sir , im currently using dr12 pro (6fans) connected to dr hub , but i cant connect my hub to mobo because the hub itself has 3pins only , my mobo is tuf gaming b450m pro2 with 2 argb headers (4pin 12v) , can i connect the hub to this converter then to mobo? tia
Great video man. Just wanted to ask if I can convert all my 3pin 5v fans? I have 4 in total comes with the case and planning on adding 3 more. All 4 fans are connected to a hub but it won't sync to the mobo. Can control it via remote controller.
This is just a converter to change the voltage from 12V to 5V. Most of the cheap RGB fan and pre-build fan uses 5V 3 pin so, if your motherboard has only 12V 4 pin header, it is the right choice but if you have a 5V 3 pin either, you can combine all 5V 3 pin with splitter hub and then connect to 5V 3 pin ARGB header on your board. This device is for the person who wants to change the voltage from 12V to 5V. This is a popular splitter hub. Here is the link: 5V RGB Splitter Hub amz.run/4TOg Thank you for your comments.
@@comtongny7776 So basically what you are saying is connect all the fans to the splitter hub then connect it to the converter then to the rgb header. I thought I can't use a splitter so I need to connect the fans directly to the converter and was worried that the converter don't have enough port. Thank you very much! You da man! 👍👍👍
Can it work with a fan controller hub? I have connected 3 fans with each having a 5 pin connector to my controller hub, and from which a single 3pin 5v cable is coming out, for the mobo (gigabyte b450m gaming) So my question is, can I run all the fans at once with my controller hub?? You know just plugin the 3pin to the converter and then to the mobo, with both connected to sata for power...?
Thanks 👍
My motherboard has a 4pin header and my 5v argb fan has an argb controller or hub I don't know what it is called. Can I connect the hub to the converter and connect it to the 4pin header so that I can sync it?
hello 1st time building a pc, can i also connect my cpu cooler 5v 3pin to this converter?
I have a case which comes with argb lights but it have 3 5v pind for all fan but my motherboard have 4 pin rgb can I use this device to make my fan work ?
Hi, How many argb fans can I connect to a single converter? Thanks!
There's only 1 port for 5V but you can use 5V 3 pin hub so that you can combine all 5V RGB devices. Thank you for your comments.
Very good bro thanks
I have a MSI Vampiric 010m case that has an rgb fan and strip with a controller and a button on the top of the case and an argb liquid cooler would i be able to use this to link the cooler to the case controller and have all the rgb sync together using the button?
Yes, it is. However, both the ARGB fan and the Liquid cooler fan should be 5V 3pin, and the connection port of the case controller should be sufficient. If it's not enough, you should use Splitter. Here is the link: 5V RGB Splitter Hub amz.run/4TOg Thank you for your comments.
I read somewhere they say that Rainbow & Breathing mode won't work on this coverter. But you video showed it worked somehow so could you help to confirm? Appreciate
They work, but to enable it you have to go into your fan software to enable it
I just got this plus new fans but the fans won’t change colors, it shows only red, how do I fix?
Perhaps you can help me, i have a Tomahawk B450 Pro Max and i'm planning to buy the case Phanteks Eclipse P400A Digital. It comes with 3 rgb fans connected with his own controller i believe? I would like to buy 3 more fans same model (Phanteks (PH-F120SK_DRGB_PWM_3P) SK120 DRGB PWM Fan 3Pack) i think all of the them are 5V ARGB.
So, with this converter (EZDIY-FAB RGB) since the DEEPCOOL one i couldn't find it in Amazon will let me connect all of them (6 Fans 5V) to my motherboard and control them with their software? Thank you.
I'm not from US so i have to make sure to get all i need in one go. Thank you.
my motherboard didnt support argb light but have 12V 4pins does this converter make the argb lights working ? like the ram . i use XLR8 ARGB ram lights
12v 4 pin is rgb not argb. So yeah itll support rgb but not addressable
You are god for me thanks a lot 🙏
I think it will work well if rgb fan is also mystic light or aura compatible.. ex. if your fan is aura compatible only and your mobo is msi mystic light there would be lighting issues.. thats what i observed with my dr12 pro darkflash and b450 mortar max with this converter.. what do you think guys?
Yeah you are right
I have the same fans and planning to buy the converter, can you elaborate what is the problem?
Hey bro, do u still use B450 mortar? What fan brand do u recommend for compatibility? Currently using darkflash too, but didnt install the deepcol converter yet.
tanks
bro
Hi there!! A little question, if I put the converter on the board to (4pin rgb) because my board does not have 3 argb pins, and I connect the 3 pins of an argb fanhub to the converter that my argb fans carry, will they work as argb or as normal rgb?
I am having the same problem
Did it worked ?
Our board only has 12V RGB Header (4-pin) - our CPU Fan has ARGB 5V. With this converter we can use our Fan on this board? And can we control the ARGB Fan with the MSI Software from the board (which is actually for the 12V RGB header)? In the video your colors are flickering with the mystic light software - is this an effect or an error?
MSI board doesn't sync when you connect 5V 3 pin connector to 4 pin ARGB header. It is a commonly known issue while we use this converter. It's light on but it can't be sync. Otherwise, everything like RAM or GPU is OK to work. I recommend using a 12V 4 pin RGB fan like Corsair or NZXT if you have an MSI board. Thank you for your comments.
@@comtongny7776 is it same for gigabyte B450M DS3h V2? please reply...🙏
You nic man 👌🏻
I have two 3 pin fans. Is there two three pin ports on the deep cool or do they daisy chain?
No. it has only 1X 5V 3 pin port. so if you want to connect together, please combine with male and female connector each other. Thank you for your comments.
@@comtongny7776 Well hello there. I fitted mine today & it works perfectly. What an amazing product that cost me £11 GDP inc delivery.
I was shocked my new ASUS motherboard only had 12v RGB. :)
i use this daisy chain with an coolmoon hub with 10 fans on it and it starting to flicker can anyone show me how to fix it
I'm planning to order this for my fans, my motherboard only has 4 pin. Would this product work with a fan hub too?
Yes. Simply just connect the 12V 4 pin connector to the converter from the board and connect 5V 3 pin connector from the hub. It automatically converts voltage from 12V to 5V. Thank you for your comments.
@@comtongny7776 Thank you very much for your reply.
@@comtongny7776 I have 2 RGB 5v fans. Is there two 3 pin connectors for my RGB of both? Thanks.
i need to connect a Thermaltake UX100 to my MSI B450 Tomahawk. I have both the cooler and the convertor.. Where do i plug everything in
Yes. There are only 2 x 5050 RGB LED strip 12V connectors on this board so you need a converter to change the voltage from 12V to 5V. If you need to connect only the CPU cooler, connect 5V 2 pin(D,G) from the cooler to the 5V 3 pin port of the converter and then connect the 12V 5050 RGB connectors to the 12V 4 pin port of the converter. If you need to connect more than 1 RGB device you can use a 5V hub to combine it all together. 5V RGB Splitter Hub amz.run/4TOg Thank you for your comments.
Are the RGB lights addressable? Or do they just blink one color?
This is not the controller. This device is only for the converting voltage for the RGB device from 12V to 5V. If you want to control RGB color, you need to use RGB compatible motherboard when you build an RGB case. If your board has only 1 12V ARGB header then you can use this converter to change the voltage from12V to 5V because most ARGB fan uses 5V voltage. Hopefully, you understand what I'm saying. Thank you for your comments.
In my case I have Asus Tuf b450m Pro gaming motherboard and it only has 12v or 4 PINs! I'd like to control all of my 10 fans using aura sync however all 10 of my fans are 3PIN OR 5V and it's not compatible with my MOBO! my question is? Can I use one of the slots of this converter for another HUB or Splitter that will support all 10 of my fans? and if yes? will it flickers or blinks as well? Thank you
Yes, you can combine all of your 5V 3 pin fans to the splitter and then connect the 5V 3 pin ARGB connector from the splitter to the converter then connect the 12V 4pin connector (female) to the ARGB LED 4 pin header on your ASUS board. Also, don't forget to download the ASUS AURA sync program to control RGB accordingly. Thank you for your comments.
any alternative for this that can connect 3 or more 5v ports for argb fans??
Argb splitter would help with the more 5v ports
work with together any argb controller?
I have a hub that has 3 5v pin fans on it. Will the hub work if i connect it to the converter?
This is a converter to change the fan voltage from 12V to 5V so, if you have only a 12V 4 pin RGB header, you can use this converter. Link: amz.run/3c87 or If you have no ARGB header, you can use an RF controller for using this RGB cooler. Link: Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: Converter: ruclips.net/video/sBCvmkXf-Zg/видео.html RF Controller: ruclips.net/video/5HOoyupW-j8/видео.html
Thank you for your comments.
Is it possible to turn off the the 5V ARGB lights of some fans when connecting to a 12V motherboard RGB header (ASUS) with this converter?
There is no separate way to turn off the lights of some fans. If you want to turn off some lights on Fan, connect the PWM pin and disconnect only 5V 3 pin from the hub. I don't know if this will be the answer you want. Thank you for your comments.
@@comtongny7776 Nice, so if you dont connect the 5V 3pin cable to the mobo the fans and RGB strips will remain off?
I ask 'cause my mobo only have 12v RGB header and I want to be able to turn all lights off when I watch a movie, for e.g.
@@P4NCH1 You typically control the lights with the mobo software. That is the whole point of this adapter! The 5v 3-pin RGB cables connect to adapter so you don't have to "manually" disconnect cables.
Can I plug the 3 PIN header cable and 4 PIN header cable to this converter at same time?
My case fans RGB needs 3 PIN connector but my motherboard only has 4 PIN. But that 4 PIN connector from my motherboard is in use for the RGB of my liquid cooler. So I want to connect the 4 pin header cable of the liquid cooler and the 3 PIN header cable to the convertor, and from the convertor to the 4 PIN of my motherboard. So I can have all fans sychronized. Is that possible? Thanks
In order to sync the RGB fan of your build, you need this converter to change the voltage from 12V to 5V. Please connect 5V 3 pin ARGB connector from the hub to converter 3 pin port then connect 12V 4 pin connector (female) to 4 pin RGB LED header on your board. Also, don't forget to download the sync program from your motherboard's website to control RGB accordingly. Thank you for your comments.
Fala brother, beleza? acabei de adquirir esse conversor da deepcool. Tenho duas fans Lian Li infinity 5v e quis ligar na minha placa mae, uma asus m510e 12v. Consegui conectar as fans e a conexao pwm coloquei num hub pwm junto com outra fan sem rgb que tenho. Acontece que as fans lian li ligaram em modo intermitente e nao consigo mudar isso. Nao reconhece elas nem pelo Armoury Crate e nem pelo L-connect 3. Logo, nao consigo alterar a iluminaçao. Alguma ideia do que posso fazer?
Asus armoury create only supports 5v 3 pin, 12v is not supported
Signal rgb is an alternative
Can i sync cf120 6 fans with Gigabyte B450M DS3H motherboard if i use this converter so i can control cf120 6 fans on the motherboard with Gigabyte RGB fusion 2.0??
Yes. there is a 1 x CPU cooler LED strip/RGB LED strip header on your board.
Please connect 5V 3 pin ARGB connector from fan hub to converter then connect 12V 4pin connector (female) to CPU cooler LED connector on your board. Also, don't forget to download the Gigabyte Fusion 2.0 sync program to control RGB accordingly. Thank you for your comments.
Thank you sooo much man👍
@@comtongny7776 I have same MOBO, but with aigo/darkflash dr120 with its hub. Could I connect its hub to converter?
Oi mano, ligo tudo bem mas é o meu controlador rgb em a luz que tá ligado. Mas rgb nenhum funciona. Acho que o aparelho tá avariado
is there an adapter that converts 4 pin rgb to a 5 pin rgbw? I'm using the B450 Aorus motherboard
There is no 5 pin or 6 pin ARGB pin and converter. If you have a 5 pin or 6 pin RGB fan, you need this controller. amz.run/4ltZ Thank you for your comments.
Mine do not reconize to control for the colors :C
Im using h510m-e asus.
What if my board have only a rgb 4 pin non argb will it make it argb?
No. In that case, you can use this RF controller to control the 5V RGB device by remote. Here is the link: Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html Thank you for your comments.
I have 3 pin header on my mb but argb fan doesnt run in rainbow effect,what should i do?
If the ARGB fan is 5V 3 pin, you don't need this converter. Please just connect 3 pin connector to 5V 3 pin ARGB header directly on your board. And then download sync programs like ASUS AURA, MSI Mystics, ASRock Polychrome, Gigabyte Fusion 2.0. and install accordingly. Good Luck! Thank you for your comments.
What is the purpose of that sata cable you've connected?
That is 12V power for the fan spinning, not RGB power. Thank you for your comments.
can i use msi mystic light for a non msi motherboard?
my mb is biostar h510m
Nope , you can't
Was there software control issues using the converter?
Not at all. It is just for converting voltage from 12V to 5V. In order to sync RGB lights, you need to download the sync program like MSI Mystics, ASUS AURA, ASRock Polychrome, Gigabyte Fusion 2.0. You can download the motherboard you used from the manufacturer's website. Thank you for your comments.
Can i connect it to an ARGB Case or is this just for Fans?
This device is only for converting voltage from 12V to 5V because most RGB fan uses 5V voltage. If your board has a 5V 3 pin ARGB header there is no problem but if not, you need this converter to change the voltage from 12V to 5V. I think 3 pin on the hub or case must be 5V so the only thing you need is ARGB compatible motherboard. Thank you for your comments.
Can i convert 12V 4 pin to 5v 3pin with this device ? with full a-rgb support ?
Sure. It is a converter to change the voltage from 12V to 5V. If you have only a 12V 4 pin ARGB header, this is a perfect device to use. Thank you for your comments.
@@comtongny7776 can i also full control it with the aura software ?
@@comtongny7776 with this device is it work normal with the software like 5v 3pin motherboard with no issue ?
my board is asus b460 4pin rgb and my case fans its argb 3pins, if l use this converter l can control my case fans on the motherboard with aura sync?
thanks.
Yes, it is. You can connect 5V 3 pin connector from the case to the converter and connect the 12V 4 pin connector to the AURA ARGB header on your board. After that, you have to download the AURA sync program from the ASUS website to control RGB accordingly. Thank you for your comments.
@@comtongny7776 thanks to u man. But it's out of stock everywhere
@@simmsimma6437 Yes. it was $19.99 but they increased the price to $36. I think it's back in stock soon. Link: amz.run/4ERF Thanks.
@@simmsimma6437 I checked this one they will have in stock tomorrow. Try this one. Link: amz.run/4ERK Thanks.
@@simmsimma6437 What about this seller? They have in stock now. Link: amz.run/4ERY
Will i still be able to control the rgb from the asrock software?
First of all, your board must compatible with addressable RGB which means that need 5V 3 pin ARGB header. If yes, you can simply connect 3 pin and 4 pin connector to the converter accordingly. And then download a sync program from your M/B manufacturer's website like ASRock Polychrome. Good Luck! Thank you for your comments.
No, this thing only does solid colors there is no solution to sync 12v to 5v or the other way around just save yourself the trouble and buy the correct voltage RGB equipment for your motherboard.
Red lng po ba tlga light niya di mapplitan po ng iba color?
what happens if you have more than 1 rbg header to run?! Looks like this only supports one 3pin rgb for Asus mobo!?
You can use a 5V RGB splitter hub to combine all of your RGB devices to connect to the 5V 3 pin port of this converter. Here is the link: 5V RGB Splitter Hub amz.run/4TOg
Thank you for your comments.
@@comtongny7776 Thanks!
Can fan speeds be controlled?
No. it is converter only. You can control the fan speed via a BIOS setting or a certain program provided by the manufacturer. Thank you for your comments.
Corsair ML 140 PRO RGB supported on this Hub??
I'm not sure because Corsair ML 140 Pro RGB comes with a 4 pin PWM hub to control the RGB fan. This converter is for changing voltage from 12V 4 pin to 5V 3 pin ARGB fan.
I think the connector type is different. Please check the connector type. Thank you for your comments.
@@comtongny7776 I see.
Any alternative that works with ml140 pro?
Bro can i use Argb cpu cooler After connect this controller on 4pin /12v rgb header motherboard?😍 btw nice video
Yes, you can simply connect 5V 3 pin connector from the CPU cooler to 3 pin connector of the controller and then connect the 4 pin connector to the ARGB pin header of your motherboard. Also, don't forget to download the sync program of your motherboard to sync RGB color accordingly. it depends on which motherboard you used. Different manufacturers use different programs. For example, MSI Mystics, ASUS AURA, ASRock Polychrome, Gigabyte Fusion 2.0. You can download the motherboard you used from the manufacturer's website. Thank you for your comments.
@@comtongny7776 i have B450 tomahawk max which has only 4pin/ 12v header
@@little__secret_9119 Yes, you can download the MSI Mystics sync program from their website after installation. Thank you.
@@comtongny7776 thanks for help, 1 more question bro i also want to connect 7 Argb cooling Fans can i sync with mobo after connect this deepcool controller 😋😊
@@little__secret_9119 In order to combine all 5V 3 pin ARGB connectors, you need this splitter.
5V RGB Splitter Hub amz.run/4TOg Please connect all 5V 3 pin connectors here and connect 3 pin connector from this splitter to the converter. Thank you.
2:48 what cord is that?
hi will that support an argb fan hub?
Yep
Can I connect my ID Cooling DF 12025 ARGB 9 fans in one converter ? to my 12V 4 pin header ?
Yes, simply connect 5V 3 pin connector from the cooler to the converter and then connect 4 pin 12V connector to 12V 4 pin on your motherboard. Thank you for your comments.
@@comtongny7776 bro, i have b450m s2h mobo and I want to set up 5 argb fans (cooler master sickleflow 120 argb). How can I do it? Help me please Idk what to do
it is compatible with an asus tuf B450 gaming plus ?
Yes. This board has a 12V 4 pin AURA ARGB header. You can convert it to any 5V 3 pin RGB device with this converter. Thank you for your comments.
If it is a converter to change the voltage from 12V to 5V, then why is the title of this video 5v to 12v?
It doesn't matter. You can use either side in both directions. 12V to 5V or 5V to 12V. But most RGB cooler or case fans use 5V. That's why I set the title. Thank you for your comments.
may i ask how many fans can i full use with it?
There is only one port for 5V 3 pin but if you use a 5V 3pin hub, you can connect a 5V 3 pin ARGB fan maximum of 10. Please check this device. upHere 7-Port 4PIN SATA PWM 5V 3PIN ADDRESSABLE RGB Fan Hub/Splitter - amz.run/4HK6 Zalman Z SYNC, ARGB Controller - amz.run/3ccD
Thank you for your comments.
@@comtongny7776 woah didnt thought that i could use a lot 5v 3pin argb fans with it, ill buy one now
@@comtongny7776 oh so you mean i need a fan hub to use more of my fans?
The breathing mode of my fans are not that smooth. They are kinda flashing on/off slowly.
This device is supposed to do so, no? I connected my fans to a 3pin splitter and connected the splitter to the converter.
I have a MSI Mainboard with 12v 4 PIN RGB Header.
I'm sorry to hear that. I heard that some MSI boards can't sync smoothly while changing the RGB color or type. That is the reason why. I read it at some forum site. Thank you for your comments.
@@comtongny7776 Ordered now a Razer ARGB Controller which will be connected to the USB Header on the Mainboard. Looks better. Maybe you want to create a video about it :)
@@SCHLAYER1705 Thank you for letting me know. Maybe I will create a video with this :)
Are the fans losing their adressable feature?
No, this is a converter that only changes the voltage of the RGB instrument. When the 5V 3 pin RGB device and the motherboard are connected, control is possible through the RGB sync program. Thank you for your comments.
@@comtongny7776 Thank you!
Can we connect 2 5vargb connector ?
There is only 1 port for 5V 3 pin so, if you want to connect more connectors, you can use a hub or splitter to combine all of them. Here is the link:
5V RGB Splitter Hub amz.run/4TOg Thank you for your comments.
@@comtongny7776 thanks bhai
My fans be flickering
Can I use an LED Strip?
Sure. Before you do that please check the voltage of the strip it is 5V or 12V. Thank you for your comments.
Color Change?
Can i plug a hub to it?
This is an RGB voltage converter so if you have only a 12V RGB header on your board, you can convert voltage from 12V to 5V by using this device. If you have a 5V 3 pin RGB hub, you can connect. Thank you for your comments.
@@comtongny7776 thanks,to wich 5v plug on it should i plug(i mean the top or one of those on the left side) a offbrand hub,thx again.
Can it do the opposite ?
i dont understand the concept to take the time to make a vid like this then race threw it a 100 mph .. i got nothing out of this
The video is to make it short and to get to the bottom of it, I was only interested of the end of it where the effects were not applying properly so this product is useless unless you are planing for a single color (static effect). The whole device installation is simple and easy to so
@@sizare911 argb is 5v and if your motherboard only has 12v theres no way for you to get the real addressable effects
So unless you will have to use 6 pin limited effects fan controllers which you cant control with softwares but only with controllers
This is for someone that already bought like a dozen of Argb fans and motherboard that supports only rgb
Just cause the video isnt usefull to you doesnt mean the video is actually pointless
Your explanations are very vague bro...
Do you have contact info if anyone can message you for help?
You can ask a question via the comments section here. I can answer the question as much as I know. Thank you for your comments.
@@comtongny7776 I have 2 DRBG fans to run. Would I be better getting the Phanteks universal controller? I can only see one available 3 pin on this hub.
Thanks.
@@adammillsindustries. This device is only for converting voltage from 12V to 5V because most RGB fan uses 5V voltage. If your board has a 5V 3 pin ARGB header there is no problem but if not, you need this converter to change the voltage from 12V to 5V. I think 3 pin on the hub must be 5V so the only thing you need is ARGB compatible motherboard. Thank you for your comments.
Hi! Can i also plug this in a 4pin header labeled as sys_fan1? My motherboard doesn't have rgb headers 🥲
Nope thats the pwm header for speed control
@@mr.lunatic3157 thanks bro
can these convert other way like 12v to 5v so i can connect a 12v 4pin to 5v 3pin for the Corsair RGB hub
Hello can we do 12v to 5 ? Do you have the answer ?