Видео

for asus b550m-k can use this converter & aura sync software?

Hero!

I love this cooler for her look she is beautiful, but performing bad

Thanks

Is we install laptop HDD

Mannnnn, i just bought this exact same mount. My 4060 was bought brand new just a couple months ago and it's barely been used. It worked perfectly fine before this installation. Noooowwwww all of a sudden, it showing signs of failure with the artifacts showing up, system crashes, system running very slow, freezing and lagging, and then occasionally the "blue screen of death" that says something is wrong and needs to be restarted. Now, I did not remove the mount and riser cable to see if it continues to happen without it, but as of right now, there's a problem. My back was starting to kill me last night while installing this and moving and messing around with my PC so I didn't even get to look into it. I know the riser is installed and seated properly in the PCIE slot on the board, the 4060 is properly seated inside of the mounts PCIE. Unlesssss it's not. It all works, but im not sure what's happening. I'm about to dive in now. I was just wondering if anyone else had this issue when installing this GPU mount and riser cable..

Bro wtf is with that background music

Excelente

Hey just a question how can i enable the wifi?

mf just spread thermal paste everywhere. this has got to be the worst repasting video ive seen yet

est-ce que ca marcherai avec le boitier h9 flow de chez nzxt

Можешь ещё быстрее крутить а то так видно все хорошо, капец

i just bought this...after i connect 9 fans to this hub,only Ambient light in App center work...in rgb fusion doesnt recognize any fan

can you connect a 5v case fan to this ?

Can the Ram be upgraded?

I have one female connector left over from my fan and no where to plug it what do i do

WHY DID HP MAKE THESE PCS WITH HDD instead of SSDs DUH DUH DUH?

I have problem with my HP Probook 440 G3. After i turn off my Windows. In first attempt to turn laptop ON, I always get black screen, keyboard backlit is working, but fan is not spinning. My laptop starts after 4th or 5th attempt normally. Everything works fine until i turn laptop off and try to turn it on. Every Diagnostic tools (also from HP) says that RAM, Processor, Disk, Motherboard, Network Cars is fine. I updated BIOS to the latest version but it is the same. Turning off Fast Boot didn't change anything.

windows para pc hp mini thin client t510 el recomendó por instalo el normal y no me sirve los puertos usb

And YES, the ram can be upgraded to a 16Gb card for around $100-120 dollars. It's only a single channel dimm and won't be as fast as a dual channel system with 2 slots, but it works better than a single 8Gb card for sure. Search for --> 16GB DDR3 Laptop RAM 1600MHz SODIMM PC3L-12800S DDR3L SO-DIMM Notebook Memory 2Rx8 1.35V CL11 Non-ECC Unbuffered 204-Pin Memory

standard rgb better for led strip,bcoz rgb can't control single fan, and argb can controller group and single fan. with software aka driver support buy the mobo

it's work for me

it doesnt work for me. im using dark flash argb fans

Thanks sir 😊😊 🙏🙏🙏

this video bad sucks never

I love small little motherboards and builds like this So beautiful and clean..

Do yourself a favor and start at the bottom of the screen when separating the front bezel from the back housing. It's much easier, and you won’t break any tabs or clips! 👍

🥰🥰😍😍🤩🤩

Can we do same effect like argb ?

Sir help me in fixing hp envy x2 which just blinks 3 times but doesn't turn on

What’s a Cha Fan header. I don’t have it on my motherboard

I just got this plus new fans but the fans won’t change colors, it shows only red, how do I fix?

i use this daisy chain with an coolmoon hub with 10 fans on it and it starting to flicker can anyone show me how to fix it

hello 1st time building a pc, can i also connect my cpu cooler 5v 3pin to this converter?

That's wrong right there!! 4:09 The pump needs to be lower or the Rad higher.

How do i control led color?

DO NOT BUY THIS CPU COOLER. It's HORRIBLE and the lighting CONSTANTLY malfunctions. LEARN FROM MY MISTAKE.

thnks from somalia 🇸🇴

thnks from somalia 🇸🇴

Your explanations are very vague bro...

I never had the Magnect kind, but these seemed more stable, so I bought them from eBay. The reason the magnet kind didn't seem as good to buy was because it can move when a person hits the PC or while moving the PC. Well, not with this one since this one screws

My on and later off back without even showing on screen PLESSE what can I do

You are god for me thanks a lot 🙏

What thickness measurement does this graph use?

Vale a pena eu comprar um desse usado ( que não esta ligando) e substituir a placa mãe?

Nice video bro❤

is the bracket big because hard drives use to be bigger?

can i use msi mystic light for a non msi motherboard? my mb is biostar h510m

Termal pad on cpu? Why you waterlooing it if you losing heat trasfer by using termal pat insted termal paste?

Nice job