LEDdess Mini 5V 3 pin RF Remote Controller - Build RGB without ARGB Header
HTML-код
- Опубликовано: 29 сен 2024
- Please subscribe and join us.~~♥
✔ subscription channel on our RUclips : bit.ly/2KHb83
[Caution] This video is for demonstration purposes only and should be performed by a professional. We are not liable for the damage you may cause to your PC
Hello, everyone.
The most frequently asked questions in the video about the RGB fans I've uploaded so far have been asking if my motherboard is compatible or not. 50 percent of the questioners have a motherboard without an ARGB header and that it wasn't Compatible. However, we have an RF remote controller that supports 5V 3 pin RGB fans. So I'm going to show you how to install RGB Fan without an ARGB header in this video. If you have an old motherboard or a new motherboard that doesn't have an ARGB header, you can build your PC with an RGB fan that supports 5V 3 pin. I hope this video helps a lot. Thanks for watching.
🅿️ LEDdess Mini ARGB RF Controller Kit:
✅ Amazon US: amz.run/41xZ
✅ Aliexpress: bityl.co/5bSr
Product Features
Support control to DS B Series Rainbow fans (3-PIN ARGB Fans)
Input SATA connector, Support All of the PSU models
Support have 3Pin-ADD-Header Rainbow LED strip or Fans
RF Remote Controller, Control is freer, 215 Dynamic Light Modes and 4 Static Light Colours
The LEDdess Mini Rainbow Lighting Controller Kit Set Up Lighting Inside Your Computer Case
✅ Demo Hardware ✅
🅿️ M/B: ASRock H310CM-HDV/M.2 - amz.run/41xa
🅿️ Memory: G.Skill Ripjaws V Series 32GB (2 x 16GB) - amz.run/41xb
🅿️ CPU: Intel Core i3-9100F - amz.run/41xc
🅿️ CPU Cooler: JUNO PRO RBW RGB CPU Fan: amzn.to/2GiMPWt
✴️ upHere 5V 3-pin Addressable RGB Graphics Card GPU Brace Support Holder: amz.run/3Fol
✴️ GPU: ASUS Radeon RX 580 O4G Dual-Fan : amz.run/3CWX
✴️ Case: Cooler Master MasterBox MB320L ARGB : amz.run/3CWb
✴️ Pccooler 120mm Case Fan- 3PACK: amz.run/3bh4
✅ RECORDING GEAR: ✅
🅿️ Panasonic Lumix DC-FZ80 4K: amz.run/3nfc
🅿️ Panasonic Lumix DC-ZS70 4k: amz.run/3nfe
🅿️ LED Video Light: geni.us/FYG5
🅿️ Motorized Video Slider Skater: amz.run/3nel
🅿️ Main Camera Slider Skater: amz.run/3ney
🅿️ Video Camera Tripod Fluid: amz.run/3nem
🅿️ Aluminum Portable Tripod: amz.run/3neo
🅿️ LED Video Light w 3 Cold Shoe: amz.run/3nep
🅿️ V-Shape Triple 3 Universal Cold Shoe Mount Bracket: amz.run/3ner
🅿️ DSLR Camera Tripod Ball Head: amz.run/3nes
🅿️ Camera Clamp Mount: amz.run/3neu
🅿️ Overhead for Lights/Camera Mounting Poles: amz.run/3nf4
🅿️ Camera Clamp Mount: amz.run/3neu
🅿️ Capture Card: amz.run/3nfX
This video is for introducing product purposes only and I am in no way affiliated with anyone caring or selling this product.
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
Please subscribe and join us.~~♥
✔ subscription channel on our RUclips : bit.ly/2KHb83
FINALLYY THE BEST VIDEO EVER, THE ONE AND ONLY VIDEO THAT HELP GAMING COMUNITY GET THEIR ARGB WITHOUT BUYING AN EXPENSIVE MOTHERBOARD, SUBBED
Will the CoolerMaster ARGB Controller A1 support all branded ARGB devices like Deepcool L360 A-RGB AIO and CF120 and CRF120Plus fans and allow to change brightness and individual LED Control?
I know the Razer chroma does support al brands but it costs $80 USD in India and the Cooler Master A1 one costs 30USD
bro i am from india but these product is not available in india so what can i do in this situation.
You can get this kind of product here. Link: bityl.co/5bSk I think they ship it worldwide. Thank you for your comments.
Hell yes finally a dam video using my motherboard and installing rgb/argb thanks pal your a life saver 🇬🇧🇬🇧⭐⭐⭐⭐⭐ sub
How did you connect the rest of the ARGB case fans with the control box. Also if the video was not so much fast forwarded, It would've been a lot easier for me to understand. I have a thermaltake UX 200 cpu cooler and it's rgb doesn't work because I don't have ARGB header on my motherboard. I'm looking for a solution.
Same i am finding solutions to
@@mrjaigaming6941I think For mine I had this Issue But All your fans are already connected to an hub Look for It on pc And you probably will find It That hub Also has a power cable Connected to turn on But has a Mb signal Cable Connect that to This And it will be able to Change the colour using it ik I replied 1 year later
I have one female connector left over from my fan and no where to plug it what do i do
Comtong ny can i add you on discord to show you if i can use thr controller for my pc
What is this music? I love the vid but is this a tutorial or an assault on moordoor
Hey Man! Did you connect the CPU cooler into the hub?
Edit: oh yes i get it now!
i ordered an after market CPU cooler it came with two connectors. My motherboard had no 3 pin 5V connectors so i just plugged it into the other CPU header.
I was skeptical on how will i change the colors but now ig i have the solution?
i've ordered an hub so i'll just connect the other 3 pin 5V connector into that and change the colors with the controller?
Did your cpu cooler come with a remote or was it a single led because i have a 6 rgb fans that i want to control but it says it only has rainbow colours so would it work still
@@Yeet-bx5bx i have Gamdias Bearous M610
it has 6 copper wires and it came with 2 connectors no remote.
@@Yeet-bx5bx you need a hub
@@Ali-oi7gj so it would for me as well
@@Ali-oi7gj and what type of hub
Can i use this w silentiumpc argb aurora strips
i bought one but only 1 led turned on in the fan why
Product is not available
I fucking love you
Completely useless.....
my computer case came with rgb fans and a remote but i dont have a rgb header on my motherboard, so if i buy a sata to 5v 3pin adapter will my remote work?
This Means If You Want To Install More Than 1 Fan He Needs Argb Splitter 1 to 3?
Sure, there is only 1 port for 5V 3 pin ARGB so if you want to connect more, please use splitter and hub. Here is the link: 5V RGB Splitter Hub amz.run/4TOg
Thank you for your comments.
@@comtongny7776 so if I want to use more than 1 rgb item, I need to but both products right? The argb controller and hub, and both will be connected directly to the psu?
Can I do this in a Mac? Im customizing my Mac Pro tower 2010, so Im trying to add rgb items.
Can you add light strips with the connector while running the fans
Of Course, you need to combine all of the RGB 3 pin female connectors with a male connector. Thank you for your comments.
Thank you sir
Hi where can i buy SATA Input connector and 3pin recieving controller
Tysm!
Do u need a rgb header
No, if you use this RF controller, you can control all RGB fans without an ARGB header on your motherboard. Thank you for your comments.
Sorry I'm confused about this. I'm still new build pc. I have asrock 320m hdv r4.0. I want buy case tecware forge m argb version n I'd cooling zoomflow 240x argb.so my question is my mobo not support for argb or rgb right?. Should I buy this receiver. N can u make simple n easy video how to connect those pin connector . xD
That is simple and easy. Plug the 5V 3 pin ARGB connector from the ID-Cooling device to this RF Controller and connect the SATA power cable to PSU. After that, you can control RGB with a remote controller. Thank you for your comments.
Can i sync cf120 6 fans with Gigabyte B450M DS3H motherboard? or i need other one, then can you please suggest me a good motherboard in which i can sync rf120 6 fans and i will control them with my pc
In this case, you'll need a converter to change the voltage from 12V to 5V Here is the link: amz.run/4Ssy Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 3 pin ARGB connector from fan hub to converter then connect 12V 4pin connector (female) to CPU LED connector on your board. Also, don't forget to download the Gigabyte Fusion 2.0 sync program to control RGB accordingly. Thank you for your comments.
thats a neat argb controller man! i have 1 hooked to a coolmoon lightbar ...i got a vid on here talking about it but just got 1 made by jonesbo that looks a lil different has their name on it but im hoping it will work the same but im wondering by chance if 1 remote will work both controllers and ill b running 10 cooler master halo 120s a cm 360 rad on my r7 3800x ...and i have the lian li light strip and cool moon light strip in a black lancool2 mesh...how many fans or /and led strips did you run off your controller? atm i only have cool moon bar but because all the crazy color combos i wanna run all that off 2 controllers if i can...didnt kno if i should just buy a 3rd...thx man!!
If your board is compatible with ARGB, you can combine it all together with this hub. Link: amz.run/4Ssz. Even if your board is not compatible with ARGB, you can connect a 5V 3 pin ARGB connector to RF mini controller to control all of your RGB devices. Please make sure all devices are 5V 3 pin. Good Luck! Thank you for your comments.
Sorry for the dumb question, i just built my first pic so i’m a bit of a noob, but do all your fans plug into a hub? All mine plug into a hub, but they don’t change color so I was told to get this controller. Would I plug my hub into this?
There is only 1 input for a 3 pin female connector in this controller. If you install a lot of RGB fan on the case, please insert it to the hub and then connect it to a 3 pin female connector of the controller. After that, you can use a remote controller to change the color. Please check this video at 2:05. Thank you for your comments.
Did your cpu cooler come with a remote or was it a single led because i have a 6 rgb fans that i want to control but it says it only has rainbow colours so would it work still? Pls answer
In order to connect all 6 fans to the remote controller, you need a 5V 3 pin splitter. Also, you can change the color by remote controller whatever you want. Here is the link: amz.run/4u39 Thank you for your comments.
1 controller for 5-6 argb fan?
Hey bro the product is not available in Amazon wt to do bro
Please try this link it shows in stock now. amz.run/41xZ Thank you for your comments.
What are the 7 static colors?
Do this work with any fans
my problem is i have argb light in ram and it does not sync
RGB Ram doesn't work with a non-compatible motherboard. If you're using a non-compatible motherboard, you can use a regular ram with an RGB heatsink to sync RGB. Here is the link: EZDIY-FAB ARGB DDR Memory RAM Cooler : amz.run/4UMH This controller introduced in this video introduces how to manage RGB on a non-compatible motherboard.
Good Luck! Thank you for your comments.
i got 4 sata on my psu and idk which one to connect to.. help
It doesn't matter which one you connect with. That's for the power of the 5V RGB controller. Thank you for your comments.
Is this work for AIO water cooling argb?
Yes. If that is an ARGB fan, you can connect a 5V 3 pin ARGB connector from the fan or hub to a 5V 3 pin port of this controller. Thank you for your comments.
Do u have the link for were u got it please
Here is the link: 🅿️ LEDdess Mini ARGB RF Controller Kit:
✅ Amazon US: amz.run/41xZ ✅ Aliexpress: bityl.co/5bSr Thank you for your comments.
I am interested to know the process but the video is so fast. :( and I don't know the cables connected to each other all I know is the Sata connected to psu.
I just answered the other questions for somebody. That is simple and easy. Plug the 5V 3 pin ARGB connector from the RGB device to this RF Controller connector(3 pin female) and connect the SATA power cable to PSU. After that, you can control RGB with a remote controller. Thank you for your comments.
@@comtongny7776 The fans are connected to psu via molex am I right sir?
@@comtongny7776 I am confused with the wires sir. Sorry I am new to this one. :(
@@christianviola8787 Please pause the video at 1:44 and see how to connect the 5V 3 pin ARGB header to the controller and pause the video at 1:46 for SATA connection, not Molex connector. Good Luck! Thanks.
I have the almost same CPU fan from thermaltake but it only has the cable for the CPU fan (3pin) at boot it can light up to single color but at windows, it's in RGB. can I connect the 3pin connector to the ARGB controller that I have so that it will sync with the case fan?
PS. There's no separate cable for the LED
Yes, you can do it. You can connect a 2 pin connector(D, G) to a 3 pin male connector of the RF controller. You can control the RGB color of the cooler by using the remote controller. You can check it in this video at 2:05 Thank you for your comments.
@@comtongny7776 mine does not have this 2 pin connector, only the 3pin that I can connect to the cpu fan in the mobo. Can I dismantle the pins so that I can connect them to the RGB controller and not connect to the cpu fan mobo?
@@atarikidd7957 Normally, the RGB cooler has 2 connectors. One is PWM 3 pin and one is a 5V 3pin ARGB connector. Thermaltake UX100 has a 2 pin ARGB connector. If not, it is not an ARGB cooler. If you want to change the color of the cooler, you need to connect a 3 pin connector to the RF controller. Thanks.
@@comtongny7776 yeah that is what I thought, maybe this is just not an ARGB cpu cooler. It's a thermaltake but in chinese box so I am thinking that it maybe a rip-off version of the ux100
Nice
Im confused where the little rectangle peice plugs into, I have one side going into the power supplies, but where does the other side go?
OK. As you can see in this video at 1:48. You can insert the male adapter into a 3 pin female connector. and then connect the female connector of the RGB fan you want to control. After that, you can control any 5V 3 pin ARGB fan includes a CPU cooler like this video at 2:05. Thank you for your comments.
@@comtongny7776 what if I want to change all the fans in a fan hub?
I got it to work with only one fan
Hi, can you turn off the RGB light with the remote?
Yes. There is a power on/off switch on the Remote controller. Thank you for your comments.
Does it have music mode?
I don't think it has music mode. It has only 215 kinds of color patterns. Thank you for your comments.
Sir my argb fans are molex connecter which connects directly in psu can i use this controller
No. This RF controller is only for the 5V 3 pin addressable RGB fan. Thank you for your comments.
@@comtongny7776is their any way to control the argb of my molex fan
@@SIMPSINGH-cg8vp Nope. It can't be controllable by RGB sync. But if the pin is 4 pin 12V, you can use IR controller. Link: amz.run/4HK2 Thanks.
How do you control the colors then
In this video, you can see I control color and function type with remote control. It has 215 Dynamic Light Modes and 4 Static Light Colours. Thank you for your comments.
@@comtongny7776 what if i also have some 12v rgb fans? Do you have a controller for those
You are RGB master. ~~~~