Thermaltake UX100 Budget RGB CPU Fan Installation -Part 2 (Intel /AMD)
HTML-код
- Опубликовано: 29 сен 2024
- #THERMALTAKEUX100#RGBFAN#FanInstallation
Please subscribe and join us.~~♥
✔ subscription channel on our RUclips : bit.ly/2KHb833
✅ Thermaltake UX100 Budget RGB CPU Fan Installation -Part 1 ✅
• Thermaltake UX100 Budg...
✅ Thermaltake UX100 Budget RGB CPU Fan Installation -Part 2 ✅
🅾️1. Install UX100 on Intel Socket - 1:21
🅾️2. Install UX100 on AMD Socket - 3:06
🅾️3. Connect 5V 3 pin connector - 4:10
🅾️4. Download SYNC program - 5:10
This video is part 2 to deal with the difficult and confusing parts of the installation process of Thermaltake UX100, which was uploaded last year. Many users have found it difficult when installing the cooler on the bracket, the tension of the metal bracket leaked too much during the heat sink, so it was not easy to latch the cooler by hand. It was the first time to appear in the low-cost RGB CPU cooler market and gained a lot of popularity. In fact, it has better performance than Stock Cooler by Intel or AMD and has RGB Sync function, so it was used for many Budget RGB Builds. As you know, this product is compatible with 5V RGB headers and you can adjust the RGB listing through the RGB Program.
[Caution] This video is for demonstration purposes only and should be performed by a professional. We are not liable for the damage you may cause to your PC
Also, please check the Competitive products installation video for comparison below.
✅ Competitive RGB CPU Cooler ✅
🅾️ RAIJINTEK JUNO PRO: • RAIJINTEK JUNO PRO RBW...
🅾️ upHere ACC92RGB: • upHere ACC92RGB Budget...
The links below are the parts I bought and installed in this video. If you would like to purchase, please go to the link below. Thank you.
✅ Demo Parts Link ✅
✴️ Thermaltake UX100: amzn.to/39VyEDs
✴️ CPU: AMD Ryzen 5 1600: amzn.to/2sLvqCA
✴️ M/B: GIGABYTE B450 AORUS M: amz.run/3bSc
✅ Manual 5V 3 pin RGB Controller ✅
✴️ Mini ARGB RF Controller Kit: amz.run/3cc9
✴️ Zalman Z SYNC, ARGB Controller: amz.run/3ccD
✴️ Lamptron LAMP-CFP30B Fan and RGB-LED-Controller: amz.run/3ccC
✅ 12V 4pin to 5V 3 pin ARGB converter ✅
✴️ EZDIY-FAB RGB Converter, 12V RGB to 5V ARGB Transfer Hub: amz.run/3ccB
✴️ RGB Converter - Convert 3-pin (+5V) ARGB Fans to 4-pin (+12V): amz.run/3ccW
✅ RECORDING GEAR: ✅
🅿️ Panasonic Lumix DC-FZ80 4K: amz.run/3nfc
🅿️ Panasonic Lumix DC-ZS70 4k: amz.run/3nfe
🅿️ LED Video Light: geni.us/FYG5
🅿️ Motorized Video Slider Skater: amz.run/3nel
🅿️ Main Camera Slider Skater: amz.run/3ney
🅿️ Video Camera Tripod Fluid: amz.run/3nem
🅿️ Aluminum Portable Tripod: amz.run/3neo
🅿️ LED Video Light w 3 Cold Shoe: amz.run/3nep
🅿️ V-Shape Triple 3 Universal Cold Shoe Mount Bracket: amz.run/3ner
🅿️ DSLR Camera Tripod Ball Head: amz.run/3nes
🅿️ Camera Clamp Mount: amz.run/3neu
🅿️ Overhead for Lights/Camera Mounting Poles: amz.run/3nf4
🅿️ Camera Clamp Mount: amz.run/3neu
🅿️ Capture Card: amz.run/3nfX
Product Detail
• [Support 5V RGB sync enabled motherboards] - Sync with 5V RGB enabled motherboards from as US, ASROCK Gigabyte, and MSI to customize lighting effect
• [Build-in ARGB LED] - 15 High lumen addressable LEDs with 16 8 million colors
• [High volume airflow Design] - 9 High air-flow Blade generates a large volume of air passing through the aluminum heatsink for steady airflow and cooling quality
• [Reliable Hydraulic Bearing] - self-lubricated Bearing and friction-reduced substance lowers operation noise and enhance thermal efficiency
• [Universal Intel/AMD Socket] - the hassle-free installation with an all-in-one backplate to be compatible with all latest Intel and AMD CPU Sockets
• [Compatible Sockets] - Intel LGA 1156/1155/1151/1150/775 & AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
• 2-year Warranty
This video is for introducing product purposes only and I am in no way affiliated with anyone caring or selling this product.
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
i don't know why But my cpu cooler does not sync with others, it does sync when the system start but stops syncing when it boots up help !
The tension is way too high for mine to work at all. It just bends the whole mounting bracket up
Hello, i need a hero.
Could i connect it to a ASUS PRIME B350M-A?
There is 1 x Fan RGB header on this board at the right side of the bottom but it is 12V 4 pin. In this case, you'll need a converter to change the voltage from 12V to 5V Here is the link: amz.run/4Ssy Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin(D,G) ARGB connector from the cooler to converter then connect 12V 4 pin connector (female) to RGB LED connector on your board. Also, don't forget to download the ASUS AURA sync program to control RGB accordingly. Thank you for your comments.
Would it work on a LGA 1200 socket? i have a gigabyte z490m Gaming X
Sure. I also installed LGA 1200 socket this fan before. It works well if you connect 5V 3 pin connector to 5V 3 pin ARGB header on your board. Thank you for your comments.
Will this work with an Asrock z490m pro4?
There are 2 x Addressable LED Headers(ADDR_LED1,2) on this board. You can connect a 5V 2 pin connector(D, G) from the cooler to 5V 3 pin ADDR_LED1 header on your board. Also, you can download the ASRock Polychrome sync program from the website and install it to control RGB accordingly. Thank you for your comments.
This thing is not strong enough for a Ryzen 5 w/ 3060 ti. Came in a prebuilt and instantly am taking it out.
How did you take the cooler out? Im struggling a bunch
I just got a prebuilt with a 5600x and 3060ti as well with this shit cooler. Playing games the thing reaches 96 degrees, like wtf?
@@dipking1801 bro I struggled hard as well. Just put pressure on the latch it may feel like too much but just be sure you're not bending anything on the cpu. The first one was hard as hell but it popped out after a bit. Good luck, it was a struggle.
@@marchfifth1754 yeah do not game go on Amazon get a deepcool or other cpu fan it'll be fine. You're risking cpu death playing on that.
@@GMartin407 did you take ur motherboard out to remove the cooler?
Now I need to remove it.
Worst CPU fan ever - the tight cord slipped and completely broke my CPU. After 5 years of not having a pc this was the worst experience. Seriously re-evaluating this AMD idea.
DO NOT BUY THIS CPU COOLER. It's HORRIBLE and the lighting CONSTANTLY malfunctions. LEARN FROM MY MISTAKE.
Trash design. The cheap plastic standoff clips are too big for an 1150 mobo.... They just won't got in... Sending back to Amazon immediately.
Hope you can still respond. Does this work on Gigagbytr ga-b85-hd3
Hello can i use this on my ASrock H110M COMBO-G motherboard?
PLEASE ANSWER
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, you can use a manual remote controller to control RGB manually. Here is the link: Mini ARGB RF Controller Kit - amz.run/3cc9 Thank you for your comments.
My i7 11700f on b650 3060 ti hits 98° swapping out asap.
THANKKKSSS LIKED AND SUBBED👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
Thanks for the closer look.
I just got a prebuilt system. The TT cooler does it's own RGB thing all by itself independent of the other fans... the ground and "D" wires were left unconnected.
When I DO connect them I can control it but it also seems to fighting whatever other automatic thing it does. I can't see a model number on it.
There are 2 different RGB options when you build an RGB case. Some pre-built brands are using 4 pin PWM RGB. It is changing color automatically already setup so, please check up your hardware by HWINFO64. This Thermaltake UX100 is ARGB(Addressable RGB) it means that the user can control it by using a sync program provided by the motherboard's manufacturer. It depends on which motherboard you used. Different manufacturers use different programs. For example, MSI Mystics, ASUS AURA, ASRock Polychrome, Gigabyte Fusion 2.0. You can download the motherboard you used from the manufacturer's website. Thank you for your comments.
@@comtongny7776 Thanks for your time. Merry Christmas and Happy New Year!
It's a Gigabyte board. I'm not on it at the moment to see what the fan model is and dig up the specs. I've got HWinfo and Fusion.
I was trying to stop the TT fan's rainbow show if I could and just keep it all steady. It will do a steady blue through Fusion with those two wires plugged in but that rainbow show is still trying to happen at the same time. May just have to live with it or turn them off.
Found this video on my hunt for what those leftover wires were for. There was just the plug to the CPU fan power.
This is a new aspect for me, never had a light up computer before. I ordered it for the 3060ti, not the lights...but there they are and I have to tinker with them.
Anywho, have a good one.
Thanks again.
F man - If only there was a video of someone doing this in reverse
i can't seem to get the plastic pins to push into the motherboard screw holes where the old cpu fan assembly was attached.
any suggestions?
Hey, did you find any solution? I'm having the same problem now
Hello! How to find D&G pin on Asus H81M-E motherboard?
I can only find another CPU fan socket :(
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, you can use this manual RF controller. Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html Thank you for your comments.
ขอบคุณครับ ตัวล็อคใส่ยากชิบหาย กลัวจะหัก กดมันสุดแรง
cool vid but i cant control the colord with my gigabyte motherboard with fusion 2 0
Same issue. Any ideas?
@@jaredbarr9318 Sorry..ended up just changing to cooler for a better one..
@@tankconnors7323 Yeah...I did I71C and it kept overheating my motherboard and freezing my system. Sticking with UX100. Higher air flow.
how do you know if its 5 volt? I have a three pin connector but it doesnt say its 5 volt or if its g-ground or d-d my motherboard is the gigabyte b450m ds3h v2
I checked the specifications of your board. It has only 1 x CPU cooler LED strip/RGB LED strip header but it is 12V 4 pin (white) near the CPU socket. In this case, you'll need a converter to change the voltage from 12V to 5V Here is the link: amz.run/4Hfk Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin ARGB connector(D,G) from the fan to converter then connect 12V 4pin connector (female) to CPU RGB LED connector on your board. Also, don't forget to download the Gigabyte Fusion 2.0 sync program to control RGB accordingly. Thank you for your comments.
3:00
Can we use rgb of thermaltake ux100 on gigabyte b450ds3h non Wi-Fi motherboard
PLEASE ANSWER PLS
Yes. there is 1 x CPU cooler LED strip/RGB LED strip header near SYS_Fan 1 on this board but it is a 12V 4 pin ARGB header. In this case, you'll need a converter to change the voltage 12V to 5V Here is the link: amz.run/3c87 Thank you for your comments.
I just bought this & mounted on my gigabyte b450m h mobo.. But the problem is the led cpu is a 12v 4 pin header & after i plugged d and g with this header, i can only get the rainbow effect.. rgb fusion 2 doesn't sync the cooler & thats why cant control rgb,,
Now my question is, after reading all the comments here, will using d and g with 12v header damage my cpu cooler fan??
& the 2nd question is, pls name some other aRGB controller thats comes cheaper as i hardly can afford of what aRGB controller u suggested to others. This controller nearly comes with the same price as tt ux 100 in my country.
I will be waiting for your answer, Sir.
Thanks
OK, I understand that but basically, this UX 100 comes with a 5V 3 pin connector for the power of RGB light. PWM connector of course it is a 12V 4 pin. These are different types of connectors so please connect 4 pin PWM connectors to CPU_Fan header and connect 2 pin from the fan D,G to 5V 3 pin LED header on your B450M board. If your comments are true, please use a converter to change the voltage from 12V to 5V. Here is the link for the product and installation. link: amz.run/4Hfk Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Thank you for your long comments. Any questions are welcome.
will this cpu cooler work with a GIGABYTE H310M A 2.0 motherboard pls respond
There is 1 x RGB LED strip header on this board but it is 12V 4 pin so, in this case, you'll need a converter to change the voltage from 12V to 5V Here is the link: amz.run/3c87 Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin(D,G) ARGB connector to converter 5V 3 pin port and then connect 12V 4 pin connector to RGB LED connector on your board. Also, don't forget to download the Gigabyte Fusion 2.0 sync program to control RGB accordingly. Thank you for your comments.
Can i use it on tug gaming b460 plus motherboard ???????
There are 2 x Aura RGB Strip Headers on this board but it is a 12V 4 pin ARGB header. In this case, you'll need a converter to change the voltage from 12V to 5V Here is the link: amz.run/3c87 Installation video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin(D,G) connector to 5V port of converter then connect 5V 3pin connector (female) to AURA LED connector on your board. Also, don't forget to download the ASUS AURA sync program to control RGB accordingly. Thank you for your comments.
Any ideas on how to take one off? I'm having real trouble doing it
Just like when installing, press the metal clip from the top with the screwdriver and pull it out. Please see the video at 2:45 for detail. Thank you for your comments.
Sirr does work h81m motherboard? Please reply
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, you can use a manual RGB remote controller. Please check this device and use this if you want to install Thermaltake UX 100. Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: Converter: ruclips.net/video/sBCvmkXf-Zg/видео.html Thank you for your comments
@@comtongny7776 😔
@@comtongny7776 You were wrong, my fan arrived today and felt perfect and Led is also working, thanks for your reply 🙏
@@KGYTFORYOU Bro can I ask you a question? Where do you connect Data and Ground Cable to your motherboard?
@@nyeinchansoe5616 I have RGB controller bro
Bro can I use it in Gigabyte 310M H
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, you can use a manual RGB remote controller. Please check this device and use this if you want to install Thermaltake UX 100. Mini ARGB RF Controller Kit - amz.run/3cc9 Thank you for your comments.
Thx
Can I use this on my Asrock H310CM-DVS plz answer?!
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, you can use a manual RGB remote controller. Please check this video for detailed installation.ruclips.net/video/5HOoyupW-j8/видео.html Please check this device and use this if you want to install Thermaltake UX 100. Mini ARGB RF Controller Kit - amz.run/3cc9 Thank you for your comments
@@comtongny7776 thanks for answering me
Thanks a lot
Can I use this on an asrock b365m pro4?
Yes. There's a 1 x Addressable LED Header on this board. You can connect 5V 2 pin(D, G) connector(female) to 5V 3 pin ARGB header on the board and download the Polychrome sync program from the ASRock website to control RGB. Thank you for your comments.
Was looking for this exact question lol. Thank you
Help me please!!! I don't know how sync with my mobo Asus
Please tell me what is the model number of your board. I will check it out and let you know how to connect. Normally if you have a 5V 3 pin compatible board, please connect 5V 2 pin connector(D,G) from the cooler to 5V 3 pin ARGB header on your board. After that, you can download the sync program like AURA from the ASUS website and install it to control RGB color accordingly. Thank you for your comments.
Did not help
Hi. I have this fan and an Asus Prime Z390P motherboard. Can I use the fan with this motherboard? I see a 12v pin on the motherboard but not 5v. Please help.
Thanks for the vid. How do you remove the push pins once installed?
As you can see in this video at 2:50. You need to push down the metal pin with a screwdriver and take out the pin to the outside. Thank you for your comments.
Hey can I insert RGB ram with this TT cooler... Coz it seems very hard to put 2 ram stick... Please reply
bro I bought ARGB fans with hub only because of this cooler. My mobo didnt had ARGB header. So, I tried connecting DATA and GND pins of cooler to hub and it didnt worked. Felt so bad, I think cooler has some problem? Also, Is there any way I can turn off it colors once for all ?
This fan needs 5V 3 pin ARGB header on the motherboard so in your case, please use an RF controller to control the 5V RGB device. Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html
Thank you for your comments.
@@comtongny7776 Thanks for the comment. Yes, I do have an hub that looks like coolmoon which has 6 pins (Data out, +5,Data in,LED-GND,FAN-GND,+12V). I have connected (D,G) pins of cooler to Data-in and GND of hub but cooler's light color is not changing with hub's remote. I think there is some fault in my wire of Cooler.
How do I remove the fan? I’m pushing down the pin things on the side but they just go right back into the slot to lock them in.
Will it work on a asus b150m-f plus motherboard???
I'm sorry to inform you that your board is not compatible with this RGB fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, please use an RF controller to control the 5V RGB device. Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html
Thank you for your comments.
Does it support gigabytes b450m ??? Plz reply me..
There is a 1 x CPU cooler LED strip/RGB LED strip header on Gigabyte B450M DS3H but it is a 12V 4 pin RGB header. In this case, you'll need a converter to change the voltage from 12V to 5V Here is the link: bityl.co/5bSw or EZDIY-FAB RGB Converter Link: amz.run/4HGN Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin ARGB connector(D.G) from fan to converter then connect 12V 4pin connector (female) to RGB LED connector on your board. Also, don't forget to download the Gigabyte Fusion 2.0 sync program to control RGB accordingly. Thank you for your comments.
@@comtongny7776
Lol now it’s working.. without attach d & g cable I attached only CPU fan cable...
how do i set up rgb with rog strix b450-f ?
Your board has only 2 x Aura RGB Strip Headers but it is 12V 4pin. This CPU cooler needs 5V 3 pin ARGB header so in this case, you need actually this converter to change the voltage Here is the link: amzn.to/2t8VnvH Thank you for your comments.
Greetings! Do you know if this cooler works with this MB?: Placa-Mãe ASRock p/ Intel LGA 1151 mATX H110M-HG4 2xDDR4
I have a rog striz 8450-f motherboard and it doesnt have a 5 volt header. What do i do?
I just saw the other comment about the motherboard and saw you put a link. But when i open the link i just get put on amazon. Could you maybe give me a name to work with?
I checked the specifications for your board. It has only 2X 12V 4 pin ARGB AURA headers. In this case, you'll need a converter to change the voltage from 12V to 5V Here is the link: amz.run/3c87 Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin ARGB connector(D.G) from fan to converter then connect 12V 4pin connector (female) to AURA RGB connector on your board. Also, don't forget to download the ASUS AURA sync program to control RGB accordingly. Thank you for your comments.
can I use it in TUF B360 Plus gaming mobo. i am planning to get it.
There's a 1X ARGB header on this board but it's a 12V 4 pin. This cooler needs 5V 3 pin header so in this case, you'll need a converter to change the voltage 12V to 5V Here is the link: amz.run/4Hfk Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin ARGB connector(D,G) from the hub to converter then connect 12V 4 pin connector (female) to RGB LED connector on your board. Also, don't forget to download the ASUS AURA sync program to control RGB accordingly. Thank you for your comments.
@@comtongny7776 thankyou for the reply . i thought of it but was not sure. already using AURA SYNC planning to get the cooler. thanks
Got an old motherboard, and ASROCK FM2A55M-DGS. Will this fan work on it? I have already installed but can’t see where to plug the RGB connectors. if the fan works to cool without the RGB that is fine.
Yes. Your board is not compatible with RGB but if you use RF mini controller, you can control RGB with a remote. Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html Also, if you don't want to RGB light on, please just connect 4 pin PWM connector to CPU_Fan header. Thank you for your comments.
Any way possible to change the cpu fan speed? It is a bit to loud for me
Is this compatible with a GIGABYTE B365M DS3H WiFi-Y1?
There's a D_LED port at the top and bottom I believe.
Yes. It has 2 x addressable LED strip headers on this board. You can connect 5V 2 pin header (D,G) from the cooler to 5V 3 pin ARGB header on your board. Don't forget to download Gigabyte Fusion 2.0 sync program to control accordingly. Thank you for your comments.
@@comtongny7776 Nice
Hey, can I connect the d and g cable to anywhere else than the addressable gen 2 rgb header on my mobo I’m using the TUF GAMING X570-PLUS (WI-FI) mobo, I’m using the addressable gen 2 rgb header for a 3pin connector that my case has. A reply would be greatly appreciated.
OK, I understand that. In this case, you can combine a 3 pin connector with the case and CPU cooler with a female & male adapter. Link: amz.run/4FnX Or Another method is to use a 12V 4 pin header by using 5V 3 pin converter. There are 2 x AURA sync 4 pin headers on this board. Here is the link: amz.run/3c87 Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 3 pin ARGB connector from the cooler to converter then connect 12V 4pin connector to 4 pin AURA sync connector on your board. Also, don't forget to download the ASUS AURA sync program to control RGB accordingly. Thank you for your comments.
Can i use it with my motherboard b450m s2h?? I have it in a nfortec krater with a controller rgb
There is only 1 LED_CPU 4 pin header near the CPU socket but it is 12V 4 pin. This Thermaltake UX100 uses 5V 3 pin so you need the converter to change the voltage from 12V to 5V. Here is the link: amz.run/3c87 Installation video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin (D,G) connector from the cooler to converter then connect 12V 4 pin connector (female) to LED_CPU connector on your board. Also, don't forget to download the Gigabyte Fusion 2.0 sync program to control RGB accordingly. Thank you for your comments.
Can I use it on my msi z97?
Is there a way to connect it to a rgb header that is 12V? Like maybe a 5v usb power pin and then the ground pin using that same usb connection?
@Iota Commited There are ARGB controllers for that. If you want to control the fan lights, you might need to buy an ARGB controller and insert that D and G pins into ARGB controller. And then you can control your fans lights through ARGB controller but not from motherboards software.
Also, If your case has got ARGB fans or controller, you can insert your CPU cooler D and G pins into that controller as well.
The question is how do I take it off. Need to upgrade my cpu nothing is working
Please Press the metal latch on top with a screwdriver-like tool and pull the lever out from the CPU bracket. Please see this video at 2:50 to get an idea of how to remove it. Thank you for your comments.
A simple question
how can i remove it on intel one
Just like when installing, press the hook from the top with the screwdriver to pull out the metal pin. Please check at 2:50 in this video. Thank you for your comments.
Will H410M PRO E fit this thing?
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, please install a cooler and then use the RF controller to control RGB accordingly. Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html Thank you for your comments.
@@comtongny7776 oh，thanks
Could this work with a erica motherboard and a 400 W Platinum power supply?
Actually No because this cooler needs 5V 3 pin ARGB header for RGB. In this case, you can use this RF controller to control 5V RGB manually. Link: Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html
Please try. Thank you for your comments.
Ive tried several different programs to change the color and none of them work , i have a MSI b365m pro-vdh , is there a specific program i need ?
That motherboard isn't compatible with the rgb socket required.
Can i use this Thermaltake ux 100 cpu cooler in Asus b85-mk motherboard...??
Plz answer please...🙏🙏🙏
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, I'd rather say use this CPU cooler instead of Thermaltake UX100. Here is the link: amzn.to/3d46k4l Thank you for your comments.
Hey there,
is there a chance this could work with my ROG Strix Z270F? The MOBO only has the 4 pin RGB connectors but i bought the Cooler master ADDRESSABLE RGB LED CONTROLLER for my case fans who only have the 3 pins connectors.
In this case, you can use an RGB converter to change the voltage 5V to 12V. I already upload video regarding this device. Please check the video here: ruclips.net/video/sBCvmkXf-Zg/видео.html
Thank you for your comments.
I wish I knew where to connect the led connector my motherboard doesn’t have anything like that :(
If you don't have any 5V 3 pin ARGB header on your board, you can use this RF controller instead. Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html Thank you for your comments.
Does this work with the MSI b365m pro-vdh?
Yes but it has only 1 x 4-pin RGB LED connector. This CPU fan needs 5V 3 pin ARGB header so, in this case, you'll need a converter to change the voltage 12V to 5V Here is the link: amz.run/3c87 Please connect 5V 3 pin ARGB connector from the hub to the converter then connect 5V 3pin connector (female) to RGB LED connector on your board. Also, don't forget to download the MSI Mystics sync program to control RGB accordingly. Thank you for your comments.
Hello can i use it for a mother a z490 plus wifi?
According to the specification of your board, it says there's 1 x Addressable Gen 2 header(s) so you can connect 5V 2 pin (D,G) to addressable Gen2 header accordingly and then download ASUS AURA sync program from the website to control RGB. Please make sure Gen 2 header is 5V 3 pin ARGB header before you do that. Thank you for your comments.
Hi dear ,
Can i use t with my MOBO ASUS p8p67
Actually, it's not compatible because this fan needs 5V 3 pin ARGB header on the board to control RGB but if you don't have a 5V 3 pin ARGB header, you can use this for any 5V RGB products. Mini ARGB RF Controller Kit - amz.run/3cc9 Here is the detailed installation video Link: ruclips.net/video/5HOoyupW-j8/видео.html Thank you for your comments.
@@comtongny7776 Thanks for the reply BUT i am currently using RGB fans on this mother board directly connected SO can i not use this with that
DOES THIS WORK ON Asus Maximus viii hero NEED ANSWER QUICK PLSSS
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, you can use a manual remote controller to control RGB manually. Here is the link: Mini ARGB RF Controller Kit - amz.run/3cc9 Thank you for your comments.
@@comtongny7776 have any suggestions on motherboards I can get
Ty's
Would the sync program be from thermal's site? or own motherboard site?
Yes, it depends on which motherboard you used. Different manufacturers use different programs. For example, MSI Mystics, ASUS AURA, ASRock Polychrome, Gigabyte Fusion 2.0. You can download the motherboard you used from the manufacturer's website. Thank you for your comments.
If I already have another cooler and want to change to this cooler, do I need to take out the motherboard from the casing for this installation? Or I can do that on the fly?
I think you need to take out M/B and install a cooler because it's hard to install the cooler when M/B installed into the case. Thank you for your comments.
Thanks for the video. Can you tell me how to connect my UX100 to a non-RGB mother board. I have an ASUS B-85M MB. I realize its not directly connectable, but could I intergrate a 3rd party controller. Any suggestions would be appreciated.
In your case, you can use an RF controller to control the 5V RGB device. You can check this link for the product and installation. Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html Thank you for your comments.
Can i use this thermatake ux100 to my gigabyte GA-H87-HD3...
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, you can use this manual remote controller to control RGB. Link: Mini ARGB RF Controller Kit - amz.run/3cc9. You can also check this video for installation: Link: ruclips.net/video/5HOoyupW-j8/видео.html
Thank you for your comments.
@@comtongny7776 sadness. :(....but thanks for your fast response.
can i use this cpu fan on this motherboard MSI B450M PRO-M2 Max,thanks
There is 1 x LED strip connector(JLED) on this board but it is 12V 4 pin. In this case, you'll need a converter to change the voltage from 12V to 5V Here is the link: amz.run/3c87 Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin ARGB connector(D.G) from fan to converter then connect 12V 4pin connector (female) to JLED connector on your board. Also, don't forget to download the MSI Mystics sync program to control RGB accordingly. Thank you for your comments.
@@comtongny7776 I buy b450m-k Do I have it on it motherboard
Hello can i used thi to my Mboard Gigabyte ga f2a68hm ds2?
No, it's not compatible but if you use this wired remote controller you can use this CPU cooler. Connect PWM to CPU_Fan header and connect 5V 3pin connector to this wired controller. Mini ARGB RF Controller Kit - amz.run/3cc9 Thank you for your comments.
Do i need 2 AM4 brackets or is one enough
Originally there's 2 AM4 Bracket on the board. To install the cooler you need two brackets. Thank you for your comments.
Is it able to be used on a LG1155 board?
Yes. However, you need to use the below device for RGB light because your board is not compatible with RGB. It needs a 5V 3 pin ARGB header. This one is the solution. Please use this device. Mini ARGB RF Controller Kit - amz.run/3cc9 Thank you for your comments.
Hey, ux100 has 3 pin non pwm header and when it is connected to 4 pin cpu fan header, it always works at 100 percent speed. Which causes lots of noise.
Is there any other way arrround for this?
This CPU cooler uses 5V 3 pin so you need a converter to change the voltage from 12V to 5V. Here is the link: amz.run/4Ssy Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 3 pin ARGB connector from the cooler to converter then connect 12V 4pin connector (female) to 4 pin RGB LED connector on your board. Also, don't forget to download the sync program to control RGB accordingly. Thank you for your comments.
@@comtongny7776 Yup thanks
Hi. Can I install this Thermaltake on Gigabyte Ga g41m Combo (Rev. 2.0) ???
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, you can use this RF remote controller to control a 5V 3 pin RGB fan. Here is the link: Mini ARGB RF Controller Kit - amz.run/3cc9 Also, you can check this video for installation. Link: ruclips.net/video/5HOoyupW-j8/видео.html Thank you for your comments.
@@comtongny7776 Thanks for answering. is this remote control device useful for use with a Cooler Master MASTERAIR G100M RGB on the gag41m combo motherboard ???
I won this heatsink at an event last weekend, so I am sure it cools better than the Thermaltake.
Can I use it on a intel Socket 1200?
Yes. It supports LGA 1200 also. I have already installed it before. Thank you for your comments.
Hey! Can we use it on a Intel Socket 1151 motherboard 300 series?
If the board has 5V 3 pin ARGB header, you can install a cooler and connect 5V 3 pin connector to 5V 3pin ARGB header. Please make sure your board has 5V 3pin ARGB header. Thank you for your comments.
How do I remove the cpu cooler from my pc?
Just like when installing, press the hook from the top with the screwdriver to pull out the metal pin. Please check at 2:50 in this video. Thank you for your comments.
how are you supposed to take it off?
To remove this cooler, press the top with a screwdriver-like tool on the main clip on the AMD bracket, remove one side first, and loosen the other side. Thank you for your comments.
can you teach how to remove it please
To remove this cooler, press the top with a screwdriver-like tool on the main clip on the AMD bracket, remove one side first, and loosen the other side. Thank you for your comments.
Can I use this in my asrock b450 pro4?
Yes. There is 1 x Addressable LED Header(ADDR_LED1) at the right side of the bottom of the board. Please connect 5V 2 pin (D,G) connector to the ADDR_LED1 header on your board and download sync program ASRock Polychrome to control RGB. Thank you for your comments.
how would you remove it from the intel set up? the pins seem to snap it in place? you just pull them out? or push them from the back of the mother board?
OK, please take out the pin and push the holder from the backside of the motherboard. I think you already took it out. Thank you for your comments.
Thanks for this! Will this be compatible with the MSI Z490 A Pro? Thanks in advance!
Edit: Nvm, it says in the specs that it has 2x3 pin RGB connector! 😅 thanks anyway for the vid!
Yes. There are 2 x 3-pin Addressable RGB headers on this board. Please connect 5V 2 pin ARGB connector(Female, D, G) from the fan to 5V 3pin Addressable RGB headers (Male) on your board. Also, don't forget to download the MSI Mystics sync program to control RGB accordingly. Thank you for your comments.
Can i use this with my asrock b450m pro4
There is 1 x Addressable LED Header(ADDR_LED1) at the bottom of the board. You can connect 2 pin connector (D,G) to 5V 3 pin ARGB (ADDR_LED1) accordingly and then download sync program ASRock Polychrome from the ASRock website. You can control RGB with this program after installation. Thank you for your comments.
@@comtongny7776 what about gigabyte aorus b450 pro wifi atx
Thank you a tonne. This video saved me today while installing.
Can I use it on the b365m ds3h
There's a 1 x RGB LED strip header on this board but it looks like 12V 4 pin. This CPU fan needs 5V 3 pin ARGB header to get the RGB power and control by sync program so in this case,
you'll need a converter to change the voltage 12V to 5V Here is the link: amz.run/3c87 Thank you for your comments.
an information i have the thermaltake 20 MT case plus the thermaltake ux100 heatsink how do i connect the D-G wires?
In order to get the light on and sync the RGB fan, you need an RGB compatible motherboard which means that has a 5V 3 pin ARGB header. Thermaltake 20 MT case also has a 5V RGB switchboard to connect 5V 3 pin connector. You need to connect both 5V 3 pin connectors to 5V 3 pin ARGB header on your board. UX100 has only 2 pin D and G. You can see the D and G(ground) letter on the board. Some board has 2 of them but the most case it has only 1. If you need to connect more than that, you need a splitter hub to combine all of them. Here is the link: 5V RGB Splitter Hub amz.run/4TOg Thank you for your comments.
@@comtongny7776 I do not have the motherboard rgb can I connect it with the e xxx of the termaltake case ??
@@pietrostama2936 If you don't have an RGB header on your board, I can recommend this controller to control RGB by remote control. Here is the link: Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html Thanks.
@@comtongny7776
thanks very kind
how do i set up rgb with gigabyte z390 gaming x motherboard?
There is only 1 x RGB LED strip header on this board but it is a 12V 4 pin header. This CPU fan needs 5V 3 pin ARGB header to get the RGB power and control by sync program. So, in this case, you'll need a converter to change the voltage 12V to 5V Here is the link: amz.run/3c87 Please connect 5V 2 pin(D, G) ARGB connector from the fan to converter then connect 5V 3pin connector (female) to RGB LED connector on your board. Also, don't forget to download the Gigabyte Fusion 2.0 sync program to control RGB accordingly. Thank you for your comments.
I also have this motherboard I cannot get the colors to change :(
Plz tell can I use it on ASUS Prime H310M-CS R2.0 mATX Motherboard
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard. Also, it doesn't fit for mini-ITX motherboard due to the size of this cooler. If you want to use this cooler, you can use a manual RGB remote controller. Please check this device and use this if you want to install Thermaltake UX 100. Mini ARGB RF Controller Kit - amz.run/3cc9 Thank you for your comments
Thanks
Can u suggest any motherboard which is compatible with intel 9th generation and this rgb fan
@@flash-12-v7r I prefer GIGABYTE B450 AORUS M for RGB build. It has a 5V 3 pin and 12V 4 pin RGB header so it is more expendable for the RGB case. Here is the link: amz.run/3bSc
Thanks.
Will the rgb still work on a led_cpu strip? I’m new to this pc stuff, and would it work on ryzen 3100?
Yes. If the LED_CPU Strip is 5V 3 pin header. If not, it's not compatible but in this case, you'll need a converter to change the voltage 12V to 5V Here is the link: amz.run/3c87 Please connect 5V 3 pin ARGB connector from the hub to converter then connect 5V 3pin connector (female) to LED_CPU connector on your board. Also, don't forget to download the MSI Mystics sync program to control RGB accordingly. This CPU cooler is compatible with all types of SOCKET. Thank you for your comments.
@@comtongny7776 thanks so much for the info!
Strangely rgb lighting still working in my MSI Gaming Plus H370 in spite there is no 5v rgb header in my motherboard and the motherboard is not even in the list of supported MB of UX100 cooler
Will this fit a i3?
Yes. It's compatible with Intel LGA 1156/1155/1151/1150/775. Thank you for your comments.
bro can you say me if i can use this on lga 1200?
Yes, it is compatible. I used to install on LGA 1200 socket before. Please check and make sure it is RGB compatible board. Thank you for your comments.
@@comtongny7776 ok thx
I think I crushed my cpu tryna install this cpu
This is a cpu cooler not cpu