Thermaltake UX100 Budget RGB CPU Fan Installation - Part 1
HTML-код
- Опубликовано: 29 сен 2024
- #THERMALTAKEUX100#RGBFAN#FanInstallation
Please subscribe and join us.~~♥
✔ subscription channel on our RUclips : bit.ly/2KHb833
[Updated]
At the request of many viewers, we made part 2 video. In Part 2, we will explain in detail what was missing from Part 1, especially the difficulty of installing the cooler, and the connection of the RGB 2 pin connector. If you don't understand Part 1 or fail to install it, please refer to Part 2 video. Thanks for watching it.
✅ Thermaltake UX100 Budget RGB CPU Fan Installation -Part 1
1. UX100 Unboxing - 00:27
2. Install UX100 on AMD Socket - 1:17
3. Download SYNC program - 4:37
✅ Thermaltake UX100 Budget RGB CPU Fan Installation -Part 2
• Thermaltake UX100 Budg...
The links below are the parts I bought and installed in this video. If you would like to purchase, please go to the link below. Thank you.
[Caution] This video is for demonstration purposes only and should be performed by a professional. We are not liable for the damage you may cause to your PC
Also, please check the Competitive products installation video for comparison below.
✅ Competitive RGB CPU Cooler ✅
🅾️ RAIJINTEK JUNO PRO: • RAIJINTEK JUNO PRO RBW...
🅾️ upHere ACC92RGB: • upHere ACC92RGB Budget...
The links below are the parts I bought and installed in this video. If you would like to purchase, please go to the link below. Thank you.
✅ Demo Parts Link ✅
✴️ Thermaltake UX100: amzn.to/39VyEDs
✴️ CPU: AMD Ryzen 5 1600: amzn.to/2sLvqCA
✴️ M/B: GIGABYTE B450 AORUS M: amz.run/3bSc
✅ Manual 5V 3 pin RGB Controller ✅
✴️ Mini ARGB RF Controller Kit: amz.run/3cc9
✴️ Zalman Z SYNC, ARGB Controller: amz.run/3ccD
✴️ Lamptron LAMP-CFP30B Fan and RGB-LED-Controller: amz.run/3ccC
✅ 12V 4pin to 5V 3 pin ARGB converter ✅
✴️ EZDIY-FAB RGB Converter, 12V RGB to 5V ARGB Transfer Hub: amz.run/3ccB
✴️ RGB Converter - Convert 3-pin (+5V) ARGB Fans to 4-pin (+12V): amz.run/3ccW
✅ Tools ✅
🅾️ Wowstick 1F Pro Upgrade Electric Screwdriver: amzn.to/35CV9ew
✅ RECORDING GEAR: ✅
🅿️ Panasonic Lumix DC-FZ80 4K: amz.run/3nfc
🅿️ Panasonic Lumix DC-ZS70 4k: amz.run/3nfe
🅿️ LED Video Light: geni.us/FYG5
🅿️ Motorized Video Slider Skater: amz.run/3nel
🅿️ Main Camera Slider: amz.run/3ney
🅿️ Video Camera Tripod Fluid: amz.run/3nem
🅿️ Aluminum Portable Tripod: amz.run/3neo
🅿️ LED Video Light w 3 Cold Shoe: amz.run/3nep
🅿️ V-Shape Triple 3 Universal Cold Shoe Mount Bracket: amz.run/3ner
🅿️ DSLR Camera Tripod Ball Head: amz.run/3nes
🅿️ Camera Clamp Mount: amz.run/3neu
🅿️ Overhead for Lights/Camera Mounting Poles: amz.run/3nf4
🅿️ Camera Clamp Mount: amz.run/3neu
🅿️ Capture Card: amz.run/3nfX
Product Detail
• [Support 5V RGB sync enabled motherboards] - Sync with 5V RGB enabled motherboards from as US, ASROCK Gigabyte, and MSI to customize lighting effect
• [Build-in ARGB LED] - 15 High lumen addressable LEDs with 16 8 million colors
• [High volume airflow Design] - 9 High air-flow Blade generates a large volume of air passing through the aluminum heatsink for steady airflow and cooling quality
• [Reliable Hydraulic Bearing] - self-lubricated Bearing and friction-reduced substance lowers operation noise and enhance thermal efficiency
• [Universal Intel/AMD Socket] - the hassle-free installation with an all-in-one backplate to be compatible with all latest Intel and AMD CPU Sockets
• [Compatible Sockets] - Intel LGA 1156/1155/1151/1150/775 & AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
• 2-year Warranty
This video is for introducing product purposes only and I am in no way affiliated with anyone caring or selling this product.
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
At the request of many viewers, we made part 2 video. In Part 2, we will explain in detail what was missing from Part 1, especially the difficulty of installing the cooler, and the connection of the RGB 2 pin connector. If you don't understand Part 1 or fail to install it, please refer to Part 2 video. Thanks for watching it.
Thermaltake UX100 Budget RGB CPU Fan Installation -Part 2: ruclips.net/video/10OOkxJfLHM/видео.html
"plug led jack on mb"
Okay thanks for that... This videos literally not helpful at all.
I'm sorry for your inconvenience. Please try my part 2 video:ruclips.net/video/10OOkxJfLHM/видео.html. That's why I made 2nd video for many viewers. Thanks.
So this cooler is only for atx motherboards? Thats fine a atx motherboard it aint that bad.
Helped a lot thanks a lot. Will definitely be subbing to the channel.
Can I fit it in a micro atx form motherboard and and if I can, will I have at least 3 ram slots available after installation??
Yes. you can but only 3 ram slots will be available after installation. Usually, most people install dual channel ram like 16Gb 32GB. Thank you for your comments.
@@comtongny7776 I bought a prebuilt pc with this cpu fan and the B460m DS3H motherboard. The Thermaltake blocks my first ram slot, preventing me from running 4 sticks of ram. Which cpu fan should I switch to to have full ram space?
RGB included thanks
I couldn't get mine to work correctly. Had all kinds of issues with the RGB side of things. I also didn't like that it covered one of my four RAM slots
Yes. It can be blocked your 1st RAM slot even if you use ATX M/B. Please check your board it has 5V 3 pin ARGB header or not. + - 2 pin must connect 5V 3 pin header to get the power and control. Thank you for your comments.
i have b460m motherboard, does anyone know what I neeed to download?
It depends on which motherboard brand you used. Different manufacturers use different programs. For example, MSI Mystics, ASUS AURA, ASRock Polychrome, Gigabyte Fusion 2.0. You can download the motherboard you used from the manufacturer's website. Thank you for your comments.
how to know if my motherboard is compatible with RGB?
It's simple. In order to connect RGB fan, your board needs 5V 3 pin ARGB male header. Please check your board specification it has 5V 3 pin header or not. Thank you for your comments. In this video, I used M/B: ASRock ATX Motherboard (B450 Gaming K4)
Amazon: amzn.to/2QNiXpX
What's these processor?
It is AMD Ryzen 5 1600 1st Gen CPU. Here's the link for detail. Thank you for your comments
CPU: AMD Ryzen 5 1600 65W AM4 Processor with Wraith Stealth Cooler
Amazon: amzn.to/2sLvqCA
M/B: ASRock ATX Motherboard (B450 Gaming K4)
Amazon: amzn.to/2QNiXpX
what program do you use to control the rgb?
ah great installation video, when installing the fan he doesn't show at all what he's doing underneath with what's gotta be fine tuned. camera angles don't exist it seems .
Hi, i want this cpu fun, but i don't what needs , i have a motherboard Foxconn 2ABF H61 www.findlaptopdriver.com/specs-foxconn-2abf-motherboard-7252011h48/ I need a controller and a converter? it light up only default mode?
Unfortunately, your board is not compatible with this fan. It needs 5V 3 pin ARGB Head for power and control but your board doesn't have. I recommend this CPU fan for you as below.
Thank you for your comments.
Link: amzn.to/2RurO16
So i have a gigabyte b450 ds3h and I can only find a 4 pin connector called led_cpu and it doesn't have any plus or minus signs on it. Where should I connect the two black and red cables?
No, if you connect it to 12V 4 pin header, it will be damaged somehow. This CPU fan needs 5V 3 pin AGB header so, there's an adapter to switch 3 pin to 4 pin but it's pricy. Here's the link for adapter link: amzn.to/2t8VnvH
Thank you for your comments.
Great video! Just one question, is the cooler smaller or bigger than the AMD Wraith Stealth stock cooler, because I want to install this on my micro-ATX board, and I'm not sure if there'll be a RAM clearance problem :(
Yeah exactly. but in most cases people use only dua channels even they use 32GB. This is bigger than you think but performance us better than the stock cooler absolutely. Thank you for your comments.
Note! Most people will lose 2 ram slots when installing this.. You are better off with Thermaltake CL-P065-AL12SW-A UX200 ARGB Lighting CPU Cooler if you need all 4 slots... Or go with a water block or smaller setup.. This is a pig for space.. It looks sharp but I'd rather use all my slots ;) Yep I Wasted 70 bux. FML
Thank you for your advice. We're talking about the $20 RGB CPU cooler. Nothing can't beat the price even we lost 2 ram slots. A few people will use 4 slots max. Thanks for your comments anyway.
hey bro i got a quick question about this fan. my rgb randomly stopped working but i noticed my 2 little progs are not connected into anything. could i plug the 2 progs into a random led spot on my motherboard? or is that gonna mess up my computer
thank you!
Did you ever figure this out? Mine aren’t working either, but they used to work. They’ve always been plugged in too!
my board is z390 gaming edge with these pins i think it support right ?
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x 4-pin ATX 12V power connector
6 x SATA 6Gb/s connectors
1 x USB 3.1 Gen2 Type-C port
2 x USB 3.1 Gen1 connectors (supports additional 4 USB 3.1 Gen1 ports)
2 x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
1 x 4-pin CPU fan connector
1 x 4-pin Water Pump connector
5 x 4-pin system fan connectors
1 x Serial port connector
1 x Front panel audio connector
2 x System panel connectors
1 x Thunderbolt Add-on Card Connector
1 x Chassis Intrusion connector
1 x TPM module connector
2 x 4-pin RGB LED connectors
1 x 3-pin RAINBOW LED connector
1 x 3-pin CORSAIR LED connector
Most of the cheap RGB fan support only 5V power through 3 pin header. According to the specification, this board has 2 x 3 pin header. Please check the manual this is 5V power or not. If you connect it to the 12V pin, it may cause damage. When you see the 3 pin header, you can see the third pin is missing. That is the 5V ARGB header. You can connect the female header here. I hope it helps a lot. Thank you for your comments.
@@comtongny7776 thanks a lot for your comment.
Ce ventirad est sincèrement un très très bon compromis niveau rapport qualité prix, il fait largement le boulot, pas bruyant du tout avec en plus une jolie touche RGB dans votre boitier. En jeu et même en intensif, mon processeur reste toujours entre 63 et 70 degrés pour le maximum. Je conseille juste d'appliquer une pâte thermique de qualité, pour ma part j'ai opté pour de la Grizzly Hydronaute.
Can this fit enough for msi b450 pro vdh max?will it consume ram compartment?
is this better than r5 3600 stock cooler I want to buy it but if its not a better cooler than there's no point plz reply
I can say it is. The only thing you can consider before you buy is the limitation of the ram slot and motherboard compatibility. This CPU fan is more than big you think. You can install only 3 slots of ram but mostly uses dual slot. Also, in order to get the power RGB lights and sync color, your board must have 5V 3 pin ARGB header. So, if you don't care about the ram slot and 5V 3 pin ARGB header is available, I will definitely recommend this CPU fan. It looks good if you install other RGB case fans. Good Luck! Thank you for your comments.
@@comtongny7776 thnk u
just received this fan, it is supposed to fit LGA 1200 socket, but looks too big for the RAM to fit (Z-490 Vision D, Gigabyte motherboard). Anyone with this problem? Thanks.
this mother board is asrock b450m ac or not
I installed ASRock B450 Gaming K4. It has 5V 3 pin ARGB header on it. You need 5V 3 pin ARGB header to connect RGB Fan connector. It looks like this: bit.ly/2XKwR0S Thank you for your comments.
Hola como va? Yo adquiri hace poco un MSI MOTHER B360M PRO-VH, si conecto el fan al mother, y luego el conector de los LED`s lo adapto a un molex? No importa que el color quede fijo. Grcias
desafortunadamente, este M / B no tiene cabeza LED de 5 pines y 3 pines. Para controlar el ventilador mediante un programa de sincronización, M / B debe tener una cabeza de 5 V y 3 pines. Tiene solo una cabeza de 12V JRGB. Hay convertidor para cambiar 12V a 5V pero es caro. Gracias por tus comentarios.
Aquí está el enlace para el adaptador: amzn.to/2t8VnvH
@@comtongny7776 aah bien entiendo, no hay problema, gracias por tu respuesta...!
Will this work with the MSI MPG B550 GAMING PLUS ATX AM4 Motherboard? I am also going to be using Ryzen 5 3600. Will I be able to use this cooler and also change the colors?
Wow! What a nice recent board you have! Yes, it works. You can connect 2 pin RGB connector + - to 3-pin RAINBOW LED connectors. You can recognize the wire color code near the ARGB pin on the board. Also, you can download the Mystic Sync program from the MSI website to sync RGB color accordingly. Mystics Download link: bit.ly/30EhMyk
Thank you for your comments.
ComTong NY thanks dude
I'm having trouble fitting the fan to my i7 6700 on an Asus Z170-A can anyone help 😅
Will it fit nicely with Gigabyte H410M because the ram slot is very close to CPU
Bruh mine came with the thermal paste already like off
Will it work with the ASRock B450M PRO4 MICRO ATX motherboard? Also I’m gonna be using AMD Ryzen 5 2600/3600 so will I be able to change this CPU cooler colors? Sorry I’m new but I subbed!
Yes. It's compatible with this CPU fan. You can simply connect +, - female connector to D_LED1 5V 3 pin (male) at the bottom of M/B. Also, you can download the sync program like ASRock Polychrome from the ASRock website. Thank you for your comments.
Amigo en qué lado de la placa conecto los dos cables (rojo y negro rgb ) del disipador Thermaltake
Para conectar estos dos cables, necesita un encabezado de 5v 3 pines en su placa. Conecte + y-de RGB 3 pines de encabezado. Primero, verifique si su placa es RGB Direccionable.
Gracias.
What is the software to change colors for the fan?
It depends on what kind of board you're using. I installed ASRock ATX Motherboard (B450 Gaming K4) so, I downloaded Polychrome from ASRock and installed it. Also there few other programs like Gigabyte Fusion 2.0, MSI Mystic, ASUS Aura. Google it you can get the link right away. Thank you for your comments.
Do u think it gonna quiet than i5-9400f stock fan, even it always at full speed? Can't stand the noise. And i have 12v Coolmoon controller, will it work?
Yes. It's quieter than the stock fan. But unfortunately, your M/B doesn't compatible with this fan. This fan needs 5V 3 pin connector. There's an adapter to switch 3 pin to 4 pin but it's pricy. Here's the link for adapter link: amzn.to/2t8VnvH
Thank you for your comments.
Is it fine for a Ryzen 1600 stock?Will it work with a MSI B350 Gaming Plus?Also could I make it work with the rgb controller of my RedDragon GC-F006?
My case is a Cheap Innovator Daybreak(Greek DIY type case) .RN in the summer spring I get 67oC max in the most demanding game I play (BFV) on both my CPU and GPU (XFX Radeon RX 580 8GB GTS XXX Edition).
My case(good enough for 20€): www.e-shop.gr/case-innovator-daybreak-p-PER.644465
Unfortunately, your M/B has only 1 x 4-pin RGB LED strip connector. This RGB fan needs 5V 3 pin ARGB header to control RGB fan color by using sync program. It is various depends on the manufacturer. In this case, you need a converter to change the voltage like 12V to 5V. There's an adapter to switch 3 pin to 4 pin but it's pricy. Here's the link for the adapter link: amzn.to/2t8VnvH Most of ARGB fan is only compatible 5V 3 pin header except some manufacturers.
If you connect only 4 pin female to cpu_fan pin on the board, it works and spins without light. So please consider before you buy this fan. You need to make a checklist before you build a PC anyway. Thank you for your comments. I appreciate.
the amount of thermal paste oof lmao
that was thermal paste? i thought he's painting the processor
@@khairulhelmi4595 Lmao
Hey friend i don't want to control the rgb,do i still need to conect it into the Motherboard and just plug the cpu fan or the leds won't turn on ?
Yes because RGB needs the power(5V) to get the light on. PWM for the fan is a separate wire. If you don't have a 5V 3 pin ARGB header, you can use this for any 5V RGB products. Link: ruclips.net/video/5HOoyupW-j8/видео.html Also, you have only a 12V 4 pin ARGB header, you can use this converter as well. Link: amz.run/3v9O Thank you for your comments.
installing this cooler is more painful than giving birth
That cpu bracket wasn't in the box....
What if, the motherboard does not have LED jack? Where does that wire go?
If your board doesn't have an ARGB header(male), there is no way to get the power of LED. In your case, you can use this PWM RGB CPU fan instead. Here is the link: amzn.to/3d46k4l Thank you for your comments.
Will this fan work with Zebronics H75B 1150Socket Motherboard?
You can just use this as CPU fan but in order to control RGB color, M/B must have 5V 3 pin ARGB LED head. If you don't mind, please just connect 4 pin CPU fan connectot on you M/B. I assume that this M/B has no RGB head like recent M/B. Thank you for your comments.
what is the software name that controls the rgb?
Is the amd bracket included in this
It comes with your motherboard but mostly disassembly because of installing the stock cooler. Thank you for your comments.
I think the person that i got my pc from lost it now does it come with thermaltake also or where should i get it from
@@moazzamalikhan2514 If so, you will have to get it from ebay then. Here is the link: ebay.to/3epLBax Thanks.
Where do the LED wires plug in? And will this work with the Gigabyte H310M S2H micro ATX motherboard? According to PC Par Picker they are compatible with each other, but I just want to make sure before I buy it!
Unfortunately, it doesn't fit with this cooler. because you need 5V 3 pin ARGB male header to get the LED power. If not, it works only a fan without LED lights. Please search ARGB compatible board to install this cooler accordingly. In this case, you can use this RGB CPU fan instead. Here is the link: amzn.to/3d46k4l Here's the link. Good luck! Thank you for your comments.
the best thermal paste distribution method imo , thats why stock cooler distribute it same way to enhance its weak performance
Hi! i hope you could help me on my ux100 on my mother board B450M PRO-VDH PLUS (MS-7A38), i cannot control the rgb. im not sure where to put the controller thank you!
I already created a video for part II regarding this cooler. Please check this link: ruclips.net/video/10OOkxJfLHM/видео.html
There is 1 x RGB LED strip connector on this board but it is 12V 4 pin(JRGB1). In order to get the light on and sync RGB whatever I want, you need a converter to change the voltage from 12V to 5V. This RGB cooler has 5V 3 pin connector. Here is the link: amz.run/3c87 Installation Video: ruclips.net/video/sBCvmkXf-Zg/видео.html Please connect 5V 2 pin(D,G) ARGB connector from the hub to converter then connect 12V 4pin connector (female) to RGB LED connector on your board. Also, don't forget to download the MSI Mystics sync program to control RGB accordingly. Thank you for your comments.
Most related
where do i download the snyc program ?
good vid. btw my mobo (msi b450 A pro) doesnt have RGB 5v 3 pin. how do i connect to RGB board?
If you have only 12V 4 pin RGB header, you can use this converter. Link: amz.run/3c87 or If you have no ARGB header, you can use RF controller for using this RGB cooler. Link: Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: Converter: ruclips.net/video/sBCvmkXf-Zg/видео.html RF Controller: ruclips.net/video/5HOoyupW-j8/видео.html
Thank you for your comments.
Can i put normal rgb RAMS (like corsair, gskill) with it or i need low profile ram?
You can install any RGB ram but only 3 ram slots can be installed due to the size of this CPU fan. I recommend dual-channel like 2 x 8GB or 2 x 16GB for memory. Thank you for your comments.
Where do you plug the rgb on the board????
i’m asking the same thing where
Can you adjust fan speed? And which software?
You can adjust fan speed via BIOS or certain programs like EasyTune provided by M/B manufacturer. You can simply download the program from the website (utility). Please go to your motherboard brand website and find the utility program they provide. Thank you for your comments.
wheres the link for the driver? thanks
Can i install this on gigabyte h270 gaming 3 motherboard?
Your board has only 12V 1 x RGB (RGBW) LED strip extension cable header. This CPU fan needs 5V 3 pin ARGB header so in this case, you need a converter to change the voltage 12V to 5V. Here is the link: amzn.to/2t8VnvH Thank you for your comments.
Wtf 😬 how can I use last slot of ram??
i have the amd Ryzen 5 2600 processor can i mount the thermaltake ux100 heatsink?
Yes, it is compatible with all sockets like Intel LGA 1156/1155/1151/1150/775 & AMD AM4/FM2/FM1/AM3+/AM3/AM2 plus/AM2. Please remember that only 3 ram socket is available after fan installation. Thank you for your comments.
I have Asus prime b360m-a and can’t find the argb header you described in other comments. What can I do from here
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, I'd rather say use this PWM RGB CPU cooler instead of this. Here is the link: amzn.to/3d46k4l Thank you for your comments.
I feel like the cpu ram and cpu fan are the easiest parts to put together
every part is easy if you know how to
@@renko8065 Big BRUH
Ken right 😂
Hi, will this fit on my Z87-G43 Gaming ATX LGA1150 mobo with the RGB working.
I'm sorry to inform you that your board is not compatible with this RGB Fan. It needs 5V 3 pin ARGB header to get the power and control. In this case, you can use this RGB CPU fan instead. Here is the link: amzn.to/3d46k4l Thank you for your comments.
Bought this a didn't realize how large it was... cant fit my 4 RAM cards in...
I'm sorry to hear that. I prefer this cooler instead of Thermaltake UX100 if you want to install 4 ram. Here is the link: ruclips.net/video/fdW1KdsIIIM/видео.html Thank you for your comments.
I have a question ! I'm also installing a 6 pack uphere RGB fans on my b450m steel legend and the RGB fans already occupies the 5v 3pin ARGB header, is there another way to control the color? Keep in mind the fans have a hub as well but I'm not sure if the CPU can connect to the hub
I understand what's your problem. In this case, you need 3 pin RGB splitter to combine ARGB fan with each other. Here's the link: amz.run/3QxS I checked specification about your board it shows only 1X 5V 3pin the other 2 headers are 12V 4 pin, so please get the splitter and combine them accordingly. Please be careful while you connect 2 pin of the fan it has only 2 pin + and -. Thank you for your comments.
was thinking of doing using that same fan on that same motherboard you are using. is there room for four sticks of ram with that fan? didn't look like it
does it have preapplied thermal paste?
No, you need thermal paste to apply separately. Thank you for your comments.
@@comtongny7776 thanks, do you have to buy it? Or does it come with one
@@michaelshim638 As you can see in this video 0:59, it comes with a small amount of thermal paste. You can use it. Thanks.
@@comtongny7776 cheers
my motherboard has the label for the header but it looks like the pins were never put in. is there anyway i can buy like a sata adapter or plug it into another header on the board?
This cooler needs 5V 3 pin ARGB header. If you have a 5V 3 pin header, you can just plug into D, G(ground) connector to the header but if not, please use the RF controller to control RGB manually. Link: Mini ARGB RF Controller Kit - amz.run/3cc9 Installation video: ruclips.net/video/5HOoyupW-j8/видео.html
Thank you for your comments.
I just check Amazon price it shows $19.99. Price may change without notice. Please check this link now: amzn.to/39VyEDs
What link should i download to change rgb color? I have a b150 pro gaming aura motherboard
If you're using the ASUS board, you can download the program from here www.asus.com/campaign/aura/global/download.php. But please make sure you connect 5V 3 pin connector to 5V 3 pin ARGB header on your board. ASUS AURA usually uses 12V 4 pin for RGB. Thank you for your comments.
No. Listen friend. The only part I had trouble with, you took. 09 seconds to explain. I need this :2:47-2:49. But with words, angles and miracles. Please.
I'm sorry for your confusion and inconvenience. There are metal clips that can be hung on both sides at the bottom of the heat sink. One is long and the other is short. Hang the short one first, and then use a tool like a screwdriver for the rest to press down hard and hang the long ring on the CPU bracket. You can check this video 3:06 Also, I think I skipped a scene for connecting wire. This CPU fan needs 5V 3 pin ARGB header to get the RGB power and control by sync program. if your board doesn't compatible, you cannot use this RGB fan. Please check your board has 5V 3 pin ARGB header pin (male). Two-wire connector + and - should be connected to 5V 3 pin ARGB header. You can see the sign + and - near the header. Thank you for your comments.
Tysm!!!
No deja espacio para usar los 4 bancos de memoria
Disculpa el conector pwm va a la motherboard pero el del rgb lo puedo conectar al controlador de mis ventiladores rgb de 5v 3 pin
Pinn y la matriz de 4 PINE deben insertarse en el CPU_in de CPU (LGB) y colocar el resto de su placa madre en el radar 3B. Gracias.
Hello! Will the UX100 fit on the cooler master ARGB led controller? Thanks
I don't think it works with CM ARGB Controller because it has only 5 pin port for CM fan connector. Thermaltake UX 100 needs 5V 3pin ARGB male header. Thank you for your comments.
Which Software did you use for RGB control ?
Hi, I installed ASRock B450 Gaming K4 so I downloaded Polychrome from the ASRock website. There are a few different programs by manufacturer like ASUS AURA, MSI Mystics, Gigabyte Fusion 2.0. Please check your brand and download the sync program accordingly. Thank you for your comments.
will it be enought for i5 6500?? im gamer so i wont upgreade it to k version
It doesn't matter what CPU you use but when you choose the M/B, you need to select ARGB compatible board. It must have 5V 3 pin ARGB header on the board to connect the RGB fan connector. It looks like this: bit.ly/2XKwR0S Thank you for your comments.
Bro this fan is good cooling because my cpu is ryzen 5 3600
Of course, it is if you don't overclock it but please make sure your board is compatible with RGB sync. If you choose 3600X or 3600XT, you'd better choose another fan instead. Thank you for your commens.
Will it work with Gigabyte H310-M s2h rev 1.0 ? I have an i3 9100.
I'm sorry to inform you that your board is not compatible with this RGB Fan. It needs 5V 3 pin ARGB header to get the power and control. In this case, you can use this RGB CPU fan instead. Here is the link: amzn.to/3d46k4l Thank you for your comments.
i have b550m ds3h motherboard can i change its colour?
Yes. There are 2 x RGB LED strip headers(D_LED1) on this board. You can connect a 5V 2 pin ARGB connector(D,G) to the RGB LED header on the board. After that, you can download and install the sync program (Fusion 2.0) from the website to control the RGB color whatever you want. Thank you for your comments.
mine is working fine on gigabyte z390 but its software always saying (could not find fan controller) what would i do?
I got it. I assume that you didn't connect 5V 3 pin jack to M/B digital addressable 3 pin. There are two pin +,- from the RGB CPU Fan must be connected to 5V 3 pin not 12V 4 pin connector. When you open up the software, there are two section for LED pin. Please connect right position and control color accordingly. Thank you for your comments.
@@comtongny7776 is there's 5v section on z390?
@@medoahmed8727 It depends on what model you have. Please check the entire board carefully. Good Luck!
will it fit perfectly on my mini asus b360 motherboard
Actually No.Because of the space between socket and memory slot. I think you can not use the first ram slot due to the size of CPU Fan. Your motherboard has 1 x Aura Addressable Strip Header so it can be controlled by the Aura sync program. Please check my video, you can find a scene installing RGB fan. I couldn't install memory at the last slot at the socket side
The choice is yours. Good Luck! Thank you for your comments.
Can this fan fit on to GIgabyte b450 s2h ıam use amd stok cooler
Yes. There is a 1 x CPU cooler LED strip/RGB LED strip header near the CPU socket but it is a 12V 4 pin ARGB header. In this case, you'll need a converter to change the voltage 12V to 5V Here is the link: amz.run/3c87 Please connect 5V 3 pin ARGB connector from the hub to converter then connect 5V 3pin connector (female) to RGB LED connector on your board. Also, don't forget to download the Gigabyte Fusion 2.0 sync program to control RGB accordingly. Thank you for your comments.
Can this fan fit on to MSI Z390 -A PRO and if so will I run into clearance issue with RAM if I want to install all four of my RAM
Sure it fits with your board but in order to control RGB color by RGB control program, your board must have 5V 3 pin LED head. It seems your board only have 12V 4 pin. I used mATX board obviously 1st ram slot can't be used due to CPU fan. I'm not sure but I think ATX board will be available space for ram slot. Thank you for your comments.
will the rgb part work with the msi z390 gaming plus motherboard?
Your board has 2x 4-pin RGB LED connectors but this CPU fan need 5V 3 pin male header so in this case, you need a converter for 12V 4 pin header but it's pricy.
Here is a link for the converter.: link: amzn.to/2t8VnvH As I know, most of ARGB CPU fan made for 5V 3 pin. or you can use two way RGB CPU cooler like this. ruclips.net/video/fdW1KdsIIIM/видео.html
Thank you for your comments.
will it fit GIGABYTE Z68XP-UD5 mobo?
It fit most CPU socket but you cannot sync RGB light of the fan. In order to get the light on and sync RGB light, you need 5V 3 pin ARGB header on your board. Unfortunately, your board has not 5V 3 pin ARGB header. Thank you for your comments.
God this cpu cooler is so ass
Can we use this fan without rgb header??? Please reply
Yes. if your board is not compatible with ARGB, please use the wired controller as this link: amz.run/3cc9 You can also combine with other ARGB case fan with this controller. Thank you for your comments.
Can i use it on ASUS PRIME A320MK mobo?
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This one needs 5V 3 pin ARGB header on the motherboard so in your case, I'd rather say use this CPU cooler instead of this. Here is the link: amzn.to/3d46k4l Thank you for your comments.
Hi is this compatible with gigabyte B460M DS3H AC (rev. 1.x)? I want to know how to connect the lights too so that i can change it. Thank you!
Yes. There are 2 x 5V 3 pin addressable LED strip headers on this board. You can simply connect 2 pin connector(D, G) to 5V 3 pin ARGB header + and - pin. And then download a Gigabyte Fusion 2.0 sync program from the Gigabyte website. Good Luck! Thank you for your comments.
@@comtongny7776 thanks!! Just want to make sure that will be the data and GND in the 5v right??
I have this cooler it works perfectly fine. It does block 1 slot of RAM on my Gigabyte B365M D3H though, using D60 Adata Spectrix
I'm sorry to hear that but there's nothing we can do. Most of mATX board has less space than other Full ATX Board. You have to use #2 and #4 slot then. Thank you for your comments. It will helpful for others.
onde vao os cabos preto e vermelho
How was your temperature ? Any improvement ?
I can say it's better than AMD stock cooler. The temperature was 30-36 in idle, 55-60 in charge status. I think most temptation was the ARGB fan which I can sync RGB from the Sync program. Thank you for your comments.
Guys what’s the name of the program u change the rgb of the fans
I installed Gigabyte Fusion 2.0 to sync RGB. It depends on which motherboard you used. Different manufacturers use different programs. For example, MSI Mystics, ASUS AURA, ASRock Polychrome, Gigabyte Fusion 2.0. You can download the motherboard you used from the manufacturer's website. Thank you for your comments.
No body shows details regarding retention clip. In my case the sink is brand new Triple color cool moon. I am trying to move clip to hook up both sides but it is not at all moving up or down . How to free it to hook up to bracket.
Please check this video for a detailed installation guide. ruclips.net/video/10OOkxJfLHM/видео.html Thank you for your comments.
Use r CTC no far
Hello, support a 2600x Ryzen?
Sure, this fan supports all AMD socket include AM4 but your board must be compatible with the ARGB. Thank you for your comments.
I have an ASRock H370M PRO4 Will it fit, and I don’t know where to get those intel brackets
No. It will not fit with this board. Because the board has not 5V 3 pin ARGB male header on it. Don't worry about the Intel bracket. It will come with an intel bracket compatible with intel 115X socket. In order to get the power for RGB light, you need to connect 5V 3 pin female connector to ARGB 3 pin header on M/B. Please search RGB compatible model. Good luck! Thank you for your comments.
Another question lol, will this fit a Asus ROG B450-F Gaming mobo?
I was trying to install it into this new mobo I got (the one I mentioned above) and I felt like the clips to hold it in were too high up and I didn’t want to squish the CPU during the mounting process
I checked the specification of your board it shows 2 x Aura RGB Strip Headers but I think it is 12V 4 pin. This CPU cooler needs 5V 3 pin to get the RGB power and control. so if this is 12V 4 pin, you need a converter to change the voltage 12V to 5V. Here's the link: amzn.to/2t8VnvH Thank you for your comments.
@@smhmyhead2215 You have to push down the clip with the driver as you can see this video 3:12. Thanks
ComTong NY dude....thanks so much i appreciate you taking the time to respond! Liked and subscribed :)
what is the software called to where you can change the colors
First of all, your board must compatible with addressable RGB which means that need 5V 3 pin ARGB header. If yes, you can simply connect 2 pin connector to 5V 3 pin ARGB header + and - pin. And then download a sync program from your M/B manufacturer's website like ASUS AURA, MSI Mystics, ASRock Polychrome, Gigabyte Fusion 2.0. Good Luck! Thank you for your comments.
Does it come with controller? My motherboard is msi a320m. I dont have any rgb header. Can I use this one?
I'm sorry to inform you that your board is not compatible with this RGB CPU cooler fan. This fan needs 5V 3 pin ARGB header on the motherboard so in your case, I'd rather say use this CPU cooler instead of this. Here is the link: amzn.to/3d46k4l Thank you for your comments.
Can I use deepcool gammax gt? It comes with controller. Or the wraith prism? As it can be connected with the usb header and control via its software ?
Video explains nothing on how to place the wires. Gg
Sorry about that. Please see our part II video. Thanks. ruclips.net/video/10OOkxJfLHM/видео.html
Hi is ux100 sync without controller? By the way I'm using Gigabyte B450m-ds3h
Your board has only 12V 1 x RGB (RGBW) LED strip extension cable header. This CPU fan needs 5V 3 pin ARGB header so in this case, you need a converter to change the voltage 12V to 5V. Here is the link: amzn.to/2t8VnvH In order to control and sync RGB, you need to download the sync program (Fusion 2.0) from the website. Thank you for your comments.
@@comtongny7776 thank you this answers all my questions.
It takes up a ram slot
Where do the D and other cable go?
D 2 pin cable goes to 5V 3 pin +, _ male header and the other 4 pin PWM goes to CPU_Fan (male) header near the CPU socket. Thank you for your comments.
I have installed the cpu dan on my asus z390 a where do I plug in the extra wire for the RGB
Fan*
This CPU fan needs 5V 3 pin ARGB header(male). This fan comes with 4 pin PWM and 2 pin 5V ARGB connector +, - (female) so you must connect this ARGB connector into 5V 3 pin ARGB header. RGB can sync by M/B sync program. Please check this video 4:40 for details. Thank you for your comments.
Hello ComTong,
Will this cooler work with the MSI ProSeries Intel B365 LGA 1151 motherboard? Here is the amazon link for this motherboard www.amazon.com/gp/product/B07WD3F69M/ref=ox_sc_act_title_4?smid=ATVPDKIKX0DER&psc=1
How do I change the color to the fan? And what software?
Yes, it depends on which motherboard you used. Different manufacturers use different programs. For example, MSI Mystics, ASUS AURA, ASRock Polychrome, Gigabyte Fusion 2.0. You can download the motherboard you used from the manufacturer's website. Thank you for your comments.
will this cpu cooler work with the msi mpg b550 gaming plus mother board?? please lmk
Yes. There are 2x 3-pin RAINBOW LED connectors on your board so please connect 2 pin connector (D, G) to 5V 3 pin RAINBOW LED header accordingly. After that, you can download the sync program MSI Mystics to control RGB whatever you want. Thank you for your comments.
@@comtongny7776 thanks i apreciate it!!! you got a sub