Best SCX24 Motor yet? Yes! It’s that good! Furitek Cedar testing
HTML-код
- Опубликовано: 20 ноя 2024
- Checking out the new inrunner motor from Furitek! It’s amazing!!!
Initial thoughts and size comparison
4:45 first power up
9:10 wheel speed test begins
12:25 crawling begins
Preorder Cedar here
furitek.com/co...
furitek.com/co...
Trx4m version available here
furitek.com/pr...
To contact me about reviews or questions email me at 2fastmattracing@gmail.com
Injora servo found here
amzn.to/45rsN6C
I finally have Merch!!
Be sure to check the sizing chart and maybe size up on those Hoodies.
Check it out at the website below!!
2fm-rc-shop.fo...
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.c...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref...
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Furitek lizard ultimate here
furitek.com/se...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.c...
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~
So psyched to get my hands on this. It seems Furitek has responded to the competition in the market by really upping their game!
Yeah they definitely stepped up!
I’ll take any micro Komodo you don’t want 😂
Wow, Furitek just never fails to impress.. talk about being on top of your game
Glad to see you so enthusiastic about this new launch.
I don't care what anyone says, I love hearing your enthusiasm about this. You can't fake enthusiasm like this, and it really shows how much you love this motor. I can't wait to get one for my FCX24, and this is the video that convinced me to get it.
Really appreciate this comment! I try to keep it as real as I can and the excitement was definitely coming through on this one lol
A doff of the hat and a pull on a greasy forelock to the design engineers at Furitek! Clever packaging to be sure. I was recently Dumpster (reg, TM) diving in the rank bilge of an old spare parts container when I yanked out my original SCX24 pitiful burnt out motor, progress has been made. Don't blink, you will be living in the past! In this video you have answered another question I don't have to ask and gave me confidence my new build's outcome. Thank you! As always a HEY to Liam!
Liam says Hey! Really appreciate ya
That slow crawl is insane thats a game changer there thanks for sharing Matt
I just put a furitek in my Gladiator Fri night and I am super impressed. I put it on the edge of my table Saturday morning and started eating breakfast with the throttle trim barely on. When I finished eating it was just over half way across the table.
Haha! Thats an awesome test! Glad you like it
That's a sick motor right there Brother. I can't wait to get one for my next SCX24 build. Thank You so much for sharing this with us.
The best striving to be better. What a company.
You better be back! I was bummin. Still not to the running but it’s so good to hear your voice bro. I can hear the smile.
Watching it, that might change my mind on brushless motors. Need to get some!!!
Dang! This is exactly what I’ve been waiting for! I love my og komodo, put it through hell (deep water, mud, sandboxes, etc). Even got it completely buried by a kid once to the point of no rotation - stuck a driver in the hole and forced it free before running it full throttle under running water - thing still works great and still smooth.
However, in my quest to cram more stuff under my stock c10 body, I got the mini komodo. It’s been great since it’s slightly smaller and faster, but I get this weird jerky motion in reverse and have no idea how to fix it. Maybe a python would help, but no idea.
But this thing is next level! If I can put the motor back in the stock location and be fully sealed, I’d be able to get so much more under the hood. Maybe an interior wouldn’t be out of the question.
Thanks for comparing it to a mini komodo with the same scx24 axles. Gets me a pretty good idea since mine with mini komodo is on fcx24 axles now.
Can you test slow crawl and top speed using the 16t pinion from the mini komodo on 3s?
Do you know if the mount it’ll come with is aluminum or plastic? Sorry if I missed it in your video.
Thanks for sharing! Will definitely pick one of these up!
Yeah that’s awesome dude, I just went couldn’t find it so I guess it ain’t out yet I will be watching for appreciate you sharing as always Matt
Preorders will start next wk I think. Releases 7-7 I’ll try to update when they go up! Thanks for always watching 🙏
It's a joy to see you so happy.
this so sick its like a tiny hobbywing system, I was just talking to my bro the other day how we needed inrunner motors like this 🔥🔥
Ok this video sold me on the Cedar. I ordered the torpedo system for the fx118(python pro and cedar) because I don’t know how well or how long that venom motor will last. Has a bit of clogging on the slow speed start up. That being said I will have an extra lizard pro to put in another rig. My Fcx24 needs some love. The venom has the right 15t pinion and I was hoping you know if it will fit and line up right without a motor mount adapter. I know I will need to hack out the stock motor. It is at least a year and a half old. I could probably space it with bushings or I guess I could just order another cedar for it. Thanks for making great reviews. You always show me what I am looking for. I have the 1400kv Komodo too. I was as giddy as you were about the cedar. I just couldn’t believe how smooth and slow it was.
Sorry I’m late to the party, but do you have a video on that rear steer dial?! It looks perfect!
I’m honestly stoked about this one
I was so jealous of that new motor I spent all weekend playing with the setting in the furitek app and finally got it to run like that new motor. Go to where you Calibate the throttle and set your punch p0wer to 3 and your done. I left everything else with stock setting. Give it a shot
Yeah I turn my punch power down a lot if my setup isn’t super smooth. Seems to be one of the settings that makes the most difference imo. Glad you got it lined out!
@2FM RC thanks me too it seems to get rid of that jump seems to smooth out that transition. Time to go chase down the mailman he has my transmission and motor for scooby-doo its all metal gears and motor all assembled . Yippee
I'm curious if you've had any issues with it? I just got mine installed on the MEUS mb24. There is huge tourq twisting going on, more than I've ever had. I took the meus iso axles apart, re-greased (utter butter) & checked & they are so smooth & no binding whatsoever. So i took the trany out & it was good to go no binding. Finally, i took the motor all the way out & barley touched the throttle & boy it jumped out of my hand & twisted the wiring fast. That alone is where 100%of my torq twist is coming from. Also, it gets untouchable hot just running in my hand for several seconds. Also, on the axles, the front has this, like hopping going on every revolution at the same point... I'm not sure what that is, but again, the axles are buttery smooth, no binding. Thanks, dig ur show.
When is it out, at l believe i didn't get to hear. Would be a great pair up with the DinkyRC esc. Rock on !! 🤘🏻🤘🏻
7/7 should be
Love your vids men. Honest and very well made. 👍 I just bought that combo, I was curious after your vids and WOW. That furitek combo is fire. Thanks
I just got one. It's amazing!!!! Have it in my new Scx24 Power Wagon.
Nice to see your enthusiasm 👍🏻👍🏻
Of course they come out with this a week after I ordered my Micro Komodo. I can't tell if you like it or not. LOL!
Haha! I got a bit excited about this one.
lol, your excitement had me crackin' up! Do I hear a fire sale coming from the channel on your other motors!? I can use a few, haha! Thanks for the review sir. Rig performs outstanding!
My wife and I had the best time watching you get excited we just giggling lol. I can see how you could get burned out I could not do what you do. I think it would take the fun out of the hobby
Lol glad I’m good for a laugh now and then! It’s like knowing what you’re getting for Xmas. You still love it and enjoy it but it’s just not quite as exciting if you’re not surprised with something new and different.
That would be of the chain in my cayman and be cool if ya could get to fit the trx4m. Really nice it's sealed. Hey does it get hot ?
@@mikemangiameli561 didn’t notice any heat on it. They are releasing one with the Trx4m and fcx mounts also
@2FM RC that's way cool. I'm out with an rc I haven't played with in awhile and wondering why not having a hoot lol
@2FM RC the thing that impresses me the most is how everything is compatible everything new work's with stuff ya bought earlier
Great to hear you giddy about this! LOL! Don't get burned out, please!!! Enjoy this as a hobby and the videos as something fun to do to donate knowledge to the community. If you're fortunate enough to not need the YT income, keep it simple.
Any ideas when it will be released??? I couldn't find it on their website yet!!!
I’ll check to be sure. Haven’t heard yet
This the only rc car hobby where you get excited over a rc going slower than snail.
lol for sure!
Awesome video Matt! So great hearing the excitement in your voice! I’m def gonna try and get one of these they look like they perform great!🤙🏻
yep I'm most definitely going to order one ASAP that is insane ! , awesome video matt appreciate the information as always .
I wonder what the new cedar will do with the python pro on 4s ??? 😁👍
And sorry that you seem to have been ghosted by OGRC on the axle. For us that are outside the States, that type of thing is so important for us as it's such a big enough headache and expense if we order from the US. Would be a nightmare if we had issues and needed help and replacements. Keep us informed big guy!
That’s what I’m talking about! Let’s go baby!
Next I would like to see it in 1 of your builds with fcx24 axles
Yeah that’s what I’m wanting to do with it next!
hi nice vid i just put his motor on my scx24 injora buggy handles great thanks for the vid. Question where did you buy the magnetic work mat from. What's the name of the mat?
After driving this for some time i prefer the mini komodo, that has smooth transition from slow speed, the Cedar does some noticeable stuttering around 40 % power, not sure if its the motor or the python esc. Also like the smaller formfactor of the mini K. Personally don't care about waterproof or 4 S,
I have been away for a while but think I need that motor now. Which ESC are you using?
Yes please sir ill take a couple👍🤠👍🤘
Absolutely amazing. Your reaction says it all. Now I want one for my hard park build 😂
Also what do you think of the LGRP axles? Or should I build +4 stock axles
I had issues with those axles early on (broke the housing & cvds) but they’ve changed their housings since. I bought a couple sets awhile back and have yet to take them out of the package lol. I just prefer the ring and pinion axles.
@@2fmrc you wanna sell a set I shot you a email
Can you do a review on the Chevrolet Apache 6x6 from FMS please?
I never picked that one up cause I’m just not a fan of 6x6s really. I think the Apache would look really cool but probably be lacking in the upgrades dept. FMS should really produce more parts for a lot of the models like the Apache. They release so many really nice trucks that have zero upgrades available.
Will the Cedar fit in the stock location? Either way that motor is amazing
I think if anything on the scx24 you’d have to trim the battery tray. On an ax24 it may be a bit of a tight fit that needs some work.
Dang it! I just upgraded my brushed motor due to its closed can design
That thing looks amazing!!!!
😮 Love it ❤ great review as always 👊✌️😎
I’ve been subscribed for a while. I’ve been waiting for a good motor. I do need 1 thing. I need a run through with links in desc of this build I have a frame and axles scx24 c10, ruined my transmission puttin a brushless that was too big into it eith custom gears .. lmk what u think I should do goin after a lcg build like what you have here. What do u reccomend. I also live in ky hour south of Evansville seen ur humv forsale
Yours works good , I'm trying to run my cedar motor and lizard pro on 3s and not having any luck , motor cuts in and out going full throttle and gets hot .
Did u ever figure it out? I have a cedar and lizard pro, and it has the super slow crawl, then jumps directly to like 50% power, kind of reminds me of driving a stock one.
Game changer. ready to pre order
What is the bolt pattern measurement? will it direct bolt into a Trx4m?
9mm. Same as micro Komodo. It won’t directly bolt in but they are gonna offer a Trx4m version.
Can I have links to transmission that’s on your build you installed the new motor in because the whole Furitek stellar transmission is a little above budget. 😂
It’s actually just a cheap overdrive transmission from amazon. I’ll link it below. Then I used a mofo mount I think for the nano motor or one of them lol
amzn.to/42B15S5
Great video, I’ll definitely be picking up one of those!
One word Matt. EPIC!!!!!!!!
Have you ran a hobbywing fusion pro 2300kv? In 10th scale, it's exactly the same. I couldn't believe you could go slower than an axe system, boy was I wrong
Oh yeah the fusion is insane for 1/10s. Can’t beat them. I’ve been buying the $69 base version the SE and it’s plenty. A few less tuning options but great for most builds. I put one in my fms Jimny and bought another for the mbscaler 😆
amzn.to/45V9tif
Thats funny you mention the ogrc axles. I actually got them to give me a refund because of the slop and got to keep the axles. havent broken them yet but havent really bashed them haha
That’s awesome! I barely ran mine at all. I mean I’ve had that build together for a good 2 months and I’ve ran it maybe 10 mins lol
AMAZING!! love the video man
That Slayer back there looking nice!!! Slayer Nation!!! 💪💯
Yessss! I gotta get some more time with it soon!
@@2fmrc great video by the way! Definitely excited to get my hands on one of those motors as well! Keep it up bro! Content is excellent! 💪💯
@@themidwestconnect really appreciate it 🙏
@@2fmrc 💯
Very interesting! 🧐
Is that the Lizard Pro ESC you are running. I was wondering about 3S on that ESC with this motor.
Dam litteraly just ordered a mini komodo a week ago wish I would have waited another 7 days 😢
It’s still a great motor!
@@2fmrc where can I buy those batteries that you are running?
Winner winner chicken dinner🏆
How is that compared with dinky+mofo ROP?. Always trust your reviews... tks
I agree with you 100% about the axles them CBDs are junk man I barely spend the tires and it caught popped it right but then I'm using Mofo's Universal axles DVDs with the other one really good turning angle also I think that's what he calls to they give you extra turning angle or something like that there on his website they are such a beast but then the rest of my car's I'm running portal axles and I haven't broke nothing and I put my stuff in the worst spot
Do you still feel the same about this motor. My mini Komodo as really been struggling with the transition lately
Bought one because of this video
Does your wife know you’re in love with this motor? It sounds great. Will it fit in my Brother Fax machine? 😂
She don’t even ask questions 😆
@@2fmrc I’m certain that she is your biggest subscriber!
Is there any modifications needed to get it installed?
I would say if anything you’d have to trim the battery tray on a stock scx24. Ax24 I’m sure they’ll have a mount that makes it fit without hitting the links and be more centered. Not sure though
@@2fmrc thanks man..
How much is this beast cuz I've been wanting to get One of those furatek ultimates also
$49.99 or $59.99 with mount. Fits the micro Komodo mount so if you have that mount you won’t need it.
@@2fmrc I don't have any furatek motors I've never tried them
Looks awesome
Funny stuff. You made me smile so much.
Awesome!
Plz tell me it can work on a ax24
Should work fine. Could be some clearance issues with the links but not sure
So there's no glitchy jerk between the FOC and brushless transition?
I honestly can't see ot having more torque than the outrunner. The inrunner vs outrunner, everything being equal, the outrunner will always have more torque just because of the design. And 12+ years running outrunner on my crawlers, I've only seen one of them knock a magnet lose from gravel...I cleaned it, and epoxied the magnet back in and it runs perfectly.
My Python is that smooth.
Yeah the oitrunner def has more torque. Always will. The inrunner is just nice for water and stuff. My favorite thing is you don’t have to worry about clearance in these tight trucks! The outrunners get tight sometimes
It looks like a small hobbywings fusion motor.
Release is 7/7/23
Preorders will start soon. I’ll try to update.
Initial thoughts and size comparison
4:45 first power up
9:10 wheel speed test begins
12:25 crawling begins
What kind of transmission you using any links?
I can't find the furitek cedar motor. How much does the motor cost? Do You know?
Should be on there site now. $49 with no mount. $59 with mount 🤘
@@2fmrc Thank You so much for the info Brother.
I think he likes it. 🙂
I just bought the c10 and I'm interested but I don't want to buy a new esc. Does this work w stock radio? new to this
What motor mount are you using in this vid ?
have you tried the cvds from Dluxfab? i havnt broke one yet after a few months of abuse
Lol that’s the ones I broke while running this truck. Broke one, went in and swapped it out with the newer version. Hit that line once and snapped the same side! Luckily I had another to keep me rolling.
6:32 Is that a little bit of smoke??
One of my lenses had a smudge on it. Drives me nuts!!! But I didn’t want to reshoot it 😆
@@2fmrchaha alrighty, just checking! I wondering if it could have been a reflection when you went to grab the block and you didn't seem to have any issues, but it did look like a little puff! 😆
How about trx4m
They are going to release one for it as well. It will fit the micro Komodo mount so if you have that setup for the Trx4m this should bolt up. You’d have to change the pinion though.
Would you say it's worth it to upgrade to this from a Mofo SMP?
Really depends how important the waterproof feature is. The smp is really smooth for me so just on control alone I don’t think I would but if picking between the two in the future I’d probably go cedar
Been a few months, do you still feel the same about this motor?
Awesome
Will it fit in the ax24?.
Do you think it will fit in the AX24?
I think it will but I’m going to do a vid finding out. I’m sure they’ll release a mount specifically for the ax24 to center the motor up a bit more to clear the links better but it may fit using the current mount idk?
@@2fmrc I started going through your comments and saw that I am not the only person who is curious! I’m looking forward to that video
Does it fit the Trx4m?
They are going to be releasing one for the Trx4m and fcx as well.
Don’t see them for sale at furitech site. How can we buy one?
Preorders should go up next wk I think. Releases 7/7
I assume you cancelled your spektrum firma order? 😂
Yes I did lol
If people are saying that they don't know why you run that FCX axles they are crazy that's the bottom line them axles are strong as especially if you put aluminum axle housings in I don't run the plastic stuff I run nothing but aluminum it All Steel years so I've had that Power Wagon and some of the worst books bined you've ever seen and it's still going strong
What transmission is that ?
Stock. Just has an old Furitek motor mount on it.
Am I slow or is there no way to have zero drag with their stuff? It drives me crazy, I need a drag break ramp or something.
On an Scx24 the issue is the worm gears. No matter what you do there is drag. On an fcx24 you turn the drag off and there is none.
Comment faire fonctionner la radio flysky gt5 avec le combo esc furitek ?
Which transmission did you go with?
Just a stock one with a different case in this truck. There really wasn’t any good options when I first built it. When I installed this motor I just went with what was already in the truck.
Go dawgs!
Awesome!
Mucha crema bro calmation 😂 Where the real test? Waterproof? Run it in sand
Lol don’t worry I’ll get there. Just installed in this one and checked it out. Just installed the Python pro with it so I can go out and sink it 😆
To the people who think you can change to a brushless and not change remotes, stop giving bad reviews on motors. If you put in a brushless motor and dont swap remotes from the stock it came with it's not going to perform correctly. Brushless motors have sensors that brushed motors do not.