How To Extend The Forks On Your Honda Shadow - Honda Shadow Fork Extension Kit
HTML-код
- Опубликовано: 30 июл 2024
- The TJ BRUTAL CUSTOMS Fork Extensions for Honda Shadow VT750, VT1100, VTX 1300 motorcycle forks are just what you need to turn that motorcycle into a mean highway cruiser! Extending the forks of a bike gives a bike a much more custom look, the handling at highway speeds is a bit more stable and it just looks cool as hell!
Click the link below to order yours!
Fork Extensions - Honda Shadow VT750, VT1100, VTX1300
shoptjbc.com/products/fork-ex...
Click the link below to order yours for
Fork Extensions - Honda Shadow VT600 VLX Steed All Years
shoptjbc.com/products/fork-ex...
These fork extensions add 6" to your forks and are machined from stainless steel, so they can be polished to a chrome-like finish to match your forks if you choose.
FITMENT
**Don't see your model? Check out our other models here!**
Honda Shadow VT750 ACE 1998 - 2003
Honda Shadow VT750 AERO 2004 - 2022
Honda Shadow VT750 Spirit 2001 - 2014
Honda Shadow VT750 RS 2010 - 2013
Honda Shadow VT750 Phantom 2010 - 2022
Honda Shadow VT1100 1987 - 2007
Honda Shadow VTX1300 2002 - 2009
When it comes to putting a long front end on your Honda motorcycle, we looked at the past chopper gods and resurrected an idea that's been around for ages, the fork extension or fork slug.
The fork extension lets you extend your front end the simplest way possible using very few tools, and doesn't require messing with your forks internals!
Follow us on instagram!
tjbrutalcus...
Follow us on Facebook!
/ tjbrutalcustoms 
Авто/Мото
if you’re bar setup allows it, what i did was thread the extensions into tubes while everything was still tight and then loosened the pinch bolts and jacked up the bike until everything lined up. very efficient if possible and less time with the bike on a sketchy home garage jack. LONG AINT WRONG 🤘🤘
Bars will always be on the way
Could just remove your bars, what on most bikes it's just 4 Allen bolts. Even if it's internally wired you could just shimmy the bars out of the way.
I have a 750 Aero so it has covers over the upper forks. I was thinking of a way to do this without having to remove the entire fork tube. Thank you.
@@smashlizard will these fit the 750 aero. I really want to get some but not sure if they will match up
@@claytonwatson3358 Not sure. I thought about rolling the dice but have not pulled the trigger yet. I've been meaning to get ahold of TJBrutalCustoms and see what he thinks.
I've been stalking the channel and the website for this video!! Once I saw these hit the website, I INSTANTLY knew I needed these.
I wrecked my 600 in 2018, but I'm happy you're still in business. Best wishes Tj.
New editing for your videos! Well done. I'm impressed. Totally different vibe.
You did mine years ago. It was a 14"over on a black vlx600 with apes and an obnoxiously tall sissy bar. Thanks again
I need more vtx 1300 products like this. Thanks guys
Great stuff as always bro! Props to Eric for teaming up on this one with you. 🤘🏻🤘🏻
@@TJBRUTALCUSTOMS can you provide us link where can we purchase this product ?
Just bought the extenders on preorder today and can’t wait to install on my bike 👍
Hell to the yeah! 🤘🏻 You guys were cracking me up the whole damn time
All that and a half second clip of the finished bike. That was a bummer. Come on guys !!!!
I'm just busting your balls. Looks like a great product and a super easy way to lengthen the front end. Very cool.
The best bike RUclipsr for non Harley’s and I love it
Fuck yeah! Thank you!!!
TJ's street cred moved up a couple of notches in the presence of Casa Customs greatness! Sup Eric!
TJ start making the FINNED SLIDE COVERS!! lol
This is awesome! I need these extensions. Would love to see a video on how to extend the control cables. That part kind of scares me a little.
@@TJBRUTALCUSTOMS I watched your video about how to figure out the length of cables needed but I found it (and you) because I was actually looking for a tutorial on how to replace the handlebars and all of the cables if I got new handlebars that brought the controls back (I have short arms apparently). I really like the buck horn bars you have... (or maybe I'll get some six bend bars?) But I still can't really find Honda Shadow specific info on how to install longer cables... and then there is that hose that comes out of something I think the cool kids call a 'master cylinder'? I think I need that. Anyways, thanks for the cool video and I'm definitely ordering those fork extensions as soon as I figure out how to replace my cables. If you start selling six bends, I'll buy those too!
Looking like a couple of professionals out there
love these, wish i could have gotten them 10 years ago. my 2001 shadow has 70,000 miles and the second set of front forks are almost done for the bike wont last long enough to justify these but they sure look like fun. i have the 750 Spirit bars on my 600 these would go well with the look. I got the solid handlebar bushings from you guys, really helped smooth things out.
Wish i could time travel for you dude! Bring you some extensions 10 yrs ago! What kinda stuff would you like to see us offer now?
@@TJBRUTALCUSTOMS i'll tell you another item that fell apart and maybe for others too: the headlight holder assembly. my glass and most of the stuff that held the bulb in all vibrated apart until it literally fell off the bike. had to replace with a really cheap thing that does not really fit the headlight mount part on the forks. a replacement from honda is like $3-400 and not really available... people might like something that attaches to the bracket on the forks .....
@@potatothorn might wanna check out the website ;) SHOPTJBC.COM
That's pretty sick, love the new video format too. Definitely gonna be looking into these
Nice work team…and any other changes in clutch or front break cables???
I just had mine installed on my 04 honda shadow aero the pueces are fucking solid heavy metal and looks amazing, the handling difference is very minimal its even more comfortable on front suspension
Damnit bro! Another part I want
Nice job!
Do they work on all shadows or just the 600? Will they fit my 01 vt750 Ace? Love the videos keep up the good work.
Looks really good
Loving the product line. Shadows dont get enough attention in the aftermarket scene. At least not from what I can google. Lol ... just curious if you ever plan on doing your own custom set of forward controls or custom triple with a rake?
I'm to lazy to get new cables 😅 and my bars are tall enough I'm already stretching them out.... But damn that rise looks good. I think I would prefer a 3-4 over though. 6 over might be a bit much depending on the build
Peace be upon you, my brother. I am a fan of your channel. Thank you for the nice information.. What is the name of this piece if you want to get it from a market or a store?
Could you do a installation video for the anteris bolt on rear fender and sissy bar kit? I’m a beginner and would love a video to go along with the written instructions on the website
Yo I just ordered these, and my bike is identical to the one in the vid, I'm fucking psyched.
I too, share in your psychoticness! Youre gonna be so stoked dude!! Thank you for the support and the comment my man!🍻🍻
The sniffles in this video are real
Looks badass ,I got a 750 Honda Shadow Ace 2003 is that compatible with my bike
Just got my extensions and really like them , but I think 8 inches might be better lol. But I’ve got a question on a bit different subject, what would make a stator wire get hot enough to melt the connector , bad stator , voltage regulator ?
LMAO at the intro. 😂Can't wait to install mine!
I’ve got a 97 1100 Shadow ACE. I’m looking for some aftermarket pipes but everywhere I look, nothing matches. Im a new rider so any help is appreciated. Thanks in advance and stay safe out there 👍🏽
I’m so doin this to my 2006 aero 750 yessir
@@TJBRUTALCUSTOMS I’m extremely excited to hear that! Aero doesn’t get much love in aftermarket support
Wow who is that Eric guy. He looks so dreamy and tough
How did this change affect the handling of the bike? Any input? Thanks for your tips.
makes a difference
VT600. Just a little short in cc's for being a real bike. I love my VT 750. 😁
Got these bad boiz pre ordered when can we expect them to ship?
What's up TJ could possibly do a video about replacing rear turn signals on a Honda Shadow??
I fucked mine up when I dropped my bike
For once your price point is excellent on this product. Will definitely be ordering some soon for my 600
Hey did these extensions end up working for your 600? I didn’t see any for a 600 linked in the description
Hello Mr TJ it would be so helpful to me and i would really appreciate it, if you can give me some tips of how to remove a stuck flywheel bolt in a HONDA SHADOW VLX 600 i'm planning to change my timing chain/cam chain on my bike but right now i'm stuck with the bolt on my flywheel, it's so stuck and hard that even my impact wrench with a maximum power of 330nm of torque can't get the job done what's the best tip or advice that you can give to me i would really do appreciate it thanks in advance sir.
Hey TJ, here is Diego from Argentina, nice video Bro, about this extension do you know if it is possible the same for a Shadow VT700c 1987
Man I hope these hold up better than the slugs from the 60-70's! Those were notorious for breaking. I built chops back then and refused to use them. Extended tubes only for me
Yo pin this comment thread to the top
Pin this comment for sure!!
Any thoughts? This comment should be pinned, no? @TJbrutalcustoms
I seen where you was re-designing the springier front end. Any guess on when it'll become available again?
Awesome video! 😎
Where is the video that talks about measuring and installing the front brake line cables? I want to stretch my forks but still need to keep my front brakes in my state.
I just purchased a 06 shadow vlx600 that’s been setting for 4 years. Took off the carb to clean it only to find out whoever the previous owner had work on it before has stripped all the screws on the bottom of the carb. I’m trying to find a new carb but can’t seem to. Would you happen yo know where I can get one?
Sweet
VERY!
I have a Shadow vt700c w/ a voyager kit. Will fork extensions lesson the steering effort?
if you have the stock handlebars would you need a longer break line or is that only if you have apes?
Can you give me any insight on where to get forward controls for a 96 honda shadow ace 1100
Whats the longest extension available for the Honda Shadow. I was looking at some pics on google with bikes having 8-10 inch extension. Is that an actually extension, or just a longer fork tube?
Hey TJ any plans to offer 3 or 4 inch extensions for the VT600? Only ones I’ve found are for Harley 39mm forks. If ya ever decide to make em a little shorter I’d buy em without hesitation lol!
4"??? Hmmmm
I hope I git a response, but I have an 1984 Honda xr500r and I'm not gitting any spark to the spark plug, I held the ground to the body and had a little shock , but no spark to the spark plug itself once hooked up, I really can't figure it out can you help me?
When will you have a set to fit the 2004 shadow 750 aero? I need a set of these
Just a question if I may. Are these extensions safe to use? cause several forums I checked said they weren't and were deemed dangerous due to flex in the fork which might cause the threaded point to fold.
Good Question but I think since the threaded portion is in between the triple tree's it safe to be the least likely area to flex the joint. I could 100% be scared if the threads were below the bottom trees.
Bro that's fukin great 👍 you definitely know your shit
Can you provide us link where can we purchase the product ?
Will this work on a 02 ace model too or only spirit?
Just want to ask how much inches did you add.
Where can I find an ape hanger cable kit for my Honda shadow??
Doesn't that change the geometry of one of the best handling twins to ever come from Japan?
Do they make these for a Harley dyna?
How do I explain to my friends that I saw a video about 2 guys and 1 bike
I was not able to get these parts from a solution store. Can someone help me to get a link that leads me to this part
Where did you buy the fork extension
Hi, its safe put fork extensions? i wanna doit to a v star 650
When do I put the locktight on
Hi, does it work for Honda VT600C 1997?
Hello shadow owners i have a big problem when i started the bike only one bougie works, it keeps oiled it self. Anyone has ever had this problem ? Can you please help me
Can you make some of those for my 87 virago
Would they fit on a 1995 honda shadow 1100?
How do I get a hold of you? I’ve been trying to email you but can’t find shit.. anyway to increase air intake on a 2000 vt1100c3? Got pipes and jetted the carbs but now I’m running a little rich
Do you sell a longer kickstand so that it’s not leaning so much? I bought the fork extensions and love the look but it makes the bike feel a lot heavier since it’s leaning over so much.
Over here, the lean is super fuckin cool. Very og chopper look. But I'll think about a longer kickstand.
If I already have slammer shocks and did the pvc lowering tip in ur past video will this will still work? And I have 8in hangers
Lol was thinking that after I sent this. Thanks tho. 🙏🏾🙏🏾
Do you have any that would fit a VTX1800C?
Hello, I have a 2014 Phantom and I want to install the extensions. In this case how would I do it? could you make a video? so I could finalize the purchase of the customization, thank you.
It's the same thing man. Watch the video, follow the steps. 👍
Where do I find these
I need 37mm tube extensions. I can't find them anywhere.
Do you have any that will fit a 02 VT1100C2
will this work on my 81 cb750?
How would this react if you also have the rear mono strut hardtail?
Sweeeeeeeet, I'll be ordering a pair for my old girl soon, thanks buddy 🤘
Would this fit a 2002 Shadow Vt750 Ace, I'm looking into these but not sure if they fit!!
Thanks
We have them fir multiple models. I do t think we have them for the ACE yet. But keep an eye out;)
Do y’all make them for a 1998 shadow 750 ace or do they all fit universally?
What is the dimensions of the slugs If you don’t mind answering another question ? 😂
where i can buy this parts ? i need it for my honda steed VLX 400
shoptjbc.com/products/fork-extensions-for-honda-shadow-vt600-vlx-steed
I did not see any of these on your website for the shadow spirit 1100. Will these work?
Gotcha thanks man 👍
After having worked on 2 shadows I'll never touch another. Too much factory stuff needs to be changed for the bike to be decent. With that said atleast someone is out here making cool parts for people who basically have zero options 👍
And so, you have to disassemble to change the fork oil!
I've heard that these can weaken the integrity of the fork tube at the top and possibly even crack due to flex where they thread in. Any truth to this?
no dude. the forks dont flex between the top clamps. the forks CAN POTENTIALLY flex below the bottom clamp. this is why i dont make these extensions to go past the lower clamp. these are super safe.
@@TJBRUTALCUSTOMS Perfect! Do you do 3" extensions by chance?
What are these made from? It says stainless but do you know which?
303
Does these work for other Bikes? Like the Yamaha Virago 125? And other similar bikes?
no the threading is not interchangeable
Does it increase handle bar height?
Um, no. Handlebar height can only be changed with new bars, or risers. With extensions The whole bike tips back pivoting on the rear axle. The actual handlebar height can't change thought the overall height from the ground changes.
Whats up man, what diameter extensions would I need for my Shadow 1100 ACE?
We do not have those available yet sorry!
No worry man thanks for the quick reply. 🤘
Yet and sorry hmm
how i can order these extensions for my Honda Shadow 2002 750 cc VT ???????
All available extensions are on shoptjbc.com. just search extensions. Each product page will have a section stating what the extensions will fit.
Will these fork extentions fit a 1995 shadow spirit vt1100??
they will not, sorry. we have other models available though which might. i dont know the models off the top of my head but they are on the site and the description will state what they fit
Will these work on a Yamaha Vago 535?
I dont think so man. Different threads
Where do you get fork extensions for a 2007 vt1100c2 ?
we do not have them in production yet
@TJBRUTALCUSTOMS yet??? Very interested in them whenever they're available
Looks like they are bending under load … Are they approved ???
They are not bending under load LOL
Is it possible to add two sets of fork extensions?
No. That would be an unwise idea. Like drinking a bottle of exlax, and going to a wedding hoping you don't need to use the bathroom.
The fork extensions of the 70's delved too far and too deep into chopper town ignoring the wisdom of the elders. Putting two extension joints in your forks, one of which is below the lower triple, is waiting fir an authoritative pothole to send you face first into the pavement. So, no.
@TJBRUTALCUSTOMS I think I can conclude that double fork extensions is a nono but thx TJ!
@TJBRUTALCUSTOMS OH and last question will I need an extended clutch and brake cable to install the fork extensions?
@@Interscoped no. The handlebars aren't changing dustance in relation to the carb or clutch...thr front fork just gets longer.
hi can i get this produckt 4 a Vs 1400
sorry we do not make them for that model;
you have a likable face.
I wish someone would sell me yamaha extended forks, not realy sure i trust these bolt on slugs
@@TJBRUTALCUSTOMS im to deep in already bought a ton of junk for my yammy lol. do you know anyone who makes these things ? Custom inner extended forks for a Yammy?