Holy Wow, Great Vid!!!!!!! Just bought one!!!!! Love it!!!! Friended you on FB..... What you did here Good Sir is priceless!!!!!! You are to kind, Thank you!!!!!!
Thanks SO MUCH for this terrific vid... The L2 is somehow simple and teeming with brilliantly conceived solutions for its purpose. It"s great to see how it works and is put together in your able hands.
You're very welcome! I really like the L2 the way its built and put together is a real achievement, very different and unique, definitely my favorite rifle at the moment. Thanks for watching.
Great video! I appreciate it! The gun seems a bit over priced for the material and lack of complexity. I am a big fan of the gun… but I think I might start with a FX Impact. I feel the cost of the gun is more justified than the edgun
Its got a lot of pieces but you don't have to touch 70% of what I took off in the video and its easy if you just take it one piece at a time, Thanks for watching.
it make me surprise at the the valve pressure tank. it is really narrow inside with the extra tube . the room now is quite narrow . so does it have enough pressure for the bullet?
Hi mate was wondering if you would be doing a video of the uragan full length, have seen all your other videos which are very detailed and informative thanks all the best glenn.
The Uragan is on the radar, need to free up a few spaces first though the rifle boxes are getting a little piled up, but I do want to get one in the future. Thanks for watching.
Hi i hope you don't mind if I pick your brains on something. Do you know off hand the daimentions of the plenum air reducer you made as I'm looking to make one for my leshiy 2 ear ?
How you doing are your tools your using called Hoody tools because I was told from Brian at Edgunwest there one of the best tools to get for taking apart your gun but I can't find them for sale. If you don't mind can you give me a website where you bought yours. Thank you.
As always very informative 👍 if you ever get hold of a steyr hunting 5 auto in .177 please do a tuning video on it 🙏. I have one, it shoots well and is very accurate but I would like more shots from it. Thank you for the brilliant videos 👍👍👍
Yet another great video jake, one thing I must say is after watching all you're videos it doesn't surprise me any more on just how easy you make things look but that's just a sign of a great engineer. 👍👍
I appreciate that Phil, take it one piece at a time and its not that complex, its been in pieces on the bench for a few days now so I hope I can figure out how to put it back together. Thanks for watching.
Great video Jeff. I’ve had mine apart to change the odd o ring but not to the extent you did so it’s good to know how it can be done if I ever need to. Mine has a black plastic spacer behind the puck to make the transfer port hole smaller which yours didn’t appear to have? Did you remove this and put in larger jets to compensate for this to keep the power down?
I think that's one of the parts the newer models come with, mine was never fitted with one though, I used the largest jets I could with a 3.5mm transfer port and adjusted the regulator to get the power I wanted, this way I should be getting the most efficient set up, although still some work to do as I don't like the plenum plug I fitted to my rifle. Thanks for watching.
@@dangerous8333 yes I’ve shot it a lot as it’s so addictive to shoot! I replaced one o ring behind the gauge as air was leaking out under pressure. I discovered that the o ring was very slightly ‘nicked’ which would have been damaged when it was assembled in the factory. Also had an o rind blow on my adjustable regulator which was due to me turning it down too much I think but this was again an easy fix. These rifles are very easy to work on compared to some others in my opinion.
Great vid Jeff, been looking forward to this since you mentioned you’d do it, well worth waiting for. Also looking forward to your development with the valve, sounds really cool. One thing though, I’m surprised you’d consider a 2 reg system as you mentioned previously you weren’t 100% sold on the FX dual reg set up, or was that just the FX implementation you weren’t completely satisfied with?
The Leshiy 2 uses a different system, my idea was to 2 different reg pressures one for the valve return pressure and the other for conventional reg pressure. This in effect would allow me to control the rate in which the valve shuts after a shot and keep it separate from the conventional reg pressure. So the regs are not working on the same job if you get what I mean, one pressure would control the rate in which the valve returns after the shot, and the other would work like the reg pressure in other rifles and control the power of the rifle. But I am still not convinced on the dual inline reg for the FX. Thanks for watching.
@@sub12airgunners Ah yes, that makes sense now. It would be great see how that works out. Also looking forward to seeing your revision on the plenum plug design, my L2 is very air hungry which isn’t the biggest problem in the world because I have the buddy bottle but it would be nice to have it running more air efficient.
I heard this was a gun you are not supposed to tinker with or take apart. I would like to hear why. Don't remember where I read that. It might have even been from Brian at Edgun west. Has anyone else heard this? And has anyone given a reason?
Its got a ton of small springs and balls in it, I just think Ed and Brian don't want people taking it apart and messing something up, as its a lot different from traditional PCP airguns. Thanks for watching.
@@sub12airgunners That's what I assumed but he should have said it that way. He should have said if you take it apart there's a chance you won't put it back together properly. Which is just common sense. Not if you take it apart it's going to be ruined, and that's how he said it. Edit: I'm going to try and find the post.
Holy Wow, Great Vid!!!!!!! Just bought one!!!!! Love it!!!! Friended you on FB..... What you did here Good Sir is priceless!!!!!! You are to kind, Thank you!!!!!!
My friend you are a genius the way you can do this and make it look so easy.
Thanks SO MUCH for this terrific vid... The L2 is somehow simple and teeming with brilliantly conceived solutions for its purpose. It"s great to see how it works and is put together in your able hands.
You're very welcome! I really like the L2 the way its built and put together is a real achievement, very different and unique, definitely my favorite rifle at the moment. Thanks for watching.
Simple????
Thank you for doing this, I really appreciate it.
I put it on my hard drive for when I mess up stripping my valve assembly.
Lol, once piece at a time and you will be fine, its less complicated than it looks. Thanks for watching.
Hi, thank you very much for your videos, they are very clear and well done !!!
Great video. Liking the tools you made, makes removing so much easier!! 👍
Great to hear!
Great video! I appreciate it!
The gun seems a bit over priced for the material and lack of complexity. I am a big fan of the gun… but I think I might start with a FX Impact. I feel the cost of the gun is more justified than the edgun
thank you so much! Exceptionally well done video!!
Glad it was helpful!
Looks like a very tricky gun to work on
Its got a lot of pieces but you don't have to touch 70% of what I took off in the video and its easy if you just take it one piece at a time, Thanks for watching.
Another top video for referral....I just need a L2 now. 😎
You know you want one Tim, its calling out to you. Thanks for watching.
it make me surprise at the the valve pressure tank. it is really narrow inside with the extra tube . the room now is quite narrow . so does it have enough pressure for the bullet?
Hi mate was wondering if you would be doing a video of the uragan full length, have seen all your other videos which are very detailed and informative thanks all the best glenn.
The Uragan is on the radar, need to free up a few spaces first though the rifle boxes are getting a little piled up, but I do want to get one in the future. Thanks for watching.
Amigos, con cual poston agrupa mejor la edgun leshiy 2
Please, I would like to know if I can buy the tool to remove the plastic wheel pin.
Hi there i dont have an O ring in the bottom of my Pressure gauge its a small plastic ring
Hi i hope you don't mind if I pick your brains on something. Do you know off hand the daimentions of the plenum air reducer you made as I'm looking to make one for my leshiy 2 ear ?
How you doing are your tools your using called Hoody tools because I was told from Brian at Edgunwest there one of the best tools to get for taking apart your gun but I can't find them for sale. If you don't mind can you give me a website where you bought yours. Thank you.
As always very informative 👍 if you ever get hold of a steyr hunting 5 auto in .177 please do a tuning video on it 🙏. I have one, it shoots well and is very accurate but I would like more shots from it. Thank you for the brilliant videos 👍👍👍
No problem mate, ill keep my eyes out for one, thanks for watching. 👍
Top job mucker 👍👊 any updates on the fx barrel adapters, will you be doing .22 & .30 ?
We can't sell them on eBay but if you want one just message jeffman on facebook link below. Thanks for watching.
facebook.com/jeff.man.39545464
Hi my bleed screw is leaking how can i fix it please
Yet another great video jake, one thing I must say is after watching all you're videos it doesn't surprise me any more on just how easy you make things look but that's just a sign of a great engineer. 👍👍
I appreciate that Phil, take it one piece at a time and its not that complex, its been in pieces on the bench for a few days now so I hope I can figure out how to put it back together. Thanks for watching.
We're can I get a leshly 2 12 ftlbs
Love the custom grip. Can I ask who made it or where you purchased from?
I got it made from a guy on the Airgunforum his name is WSnaith, really nice work highly recommended. Thanks for watching
Great tutorial
great video..
Great video Jeff. I’ve had mine apart to change the odd o ring but not to the extent you did so it’s good to know how it can be done if I ever need to. Mine has a black plastic spacer behind the puck to make the transfer port hole smaller which yours didn’t appear to have? Did you remove this and put in larger jets to compensate for this to keep the power down?
I think that's one of the parts the newer models come with, mine was never fitted with one though, I used the largest jets I could with a 3.5mm transfer port and adjusted the regulator to get the power I wanted, this way I should be getting the most efficient set up, although still some work to do as I don't like the plenum plug I fitted to my rifle. Thanks for watching.
You've already had to replace o-rings? May I ask how long you've had the L2? Do you shoot a lot?
@@dangerous8333 yes I’ve shot it a lot as it’s so addictive to shoot! I replaced one o ring behind the gauge as air was leaking out under pressure. I discovered that the o ring was very slightly ‘nicked’ which would have been damaged when it was assembled in the factory. Also had an o rind blow on my adjustable regulator which was due to me turning it down too much I think but this was again an easy fix. These rifles are very easy to work on compared to some others in my opinion.
so thank you，is nice video
No problem. Thanks for watching
Great vid Jeff, been looking forward to this since you mentioned you’d do it, well worth waiting for.
Also looking forward to your development with the valve, sounds really cool.
One thing though, I’m surprised you’d consider a 2 reg system as you mentioned previously you weren’t 100% sold on the FX dual reg set up, or was that just the FX implementation you weren’t completely satisfied with?
The Leshiy 2 uses a different system, my idea was to 2 different reg pressures one for the valve return pressure and the other for conventional reg pressure. This in effect would allow me to control the rate in which the valve shuts after a shot and keep it separate from the conventional reg pressure. So the regs are not working on the same job if you get what I mean, one pressure would control the rate in which the valve returns after the shot, and the other would work like the reg pressure in other rifles and control the power of the rifle. But I am still not convinced on the dual inline reg for the FX. Thanks for watching.
@@sub12airgunners Ah yes, that makes sense now. It would be great see how that works out. Also looking forward to seeing your revision on the plenum plug design, my L2 is very air hungry which isn’t the biggest problem in the world because I have the buddy bottle but it would be nice to have it running more air efficient.
Thank You
You're welcome 👍
Fantastic vid , but boy oh boy , would I be in some serious s**t if I tried that dis assembly stuff ...
I heard this was a gun you are not supposed to tinker with or take apart. I would like to hear why. Don't remember where I read that. It might have even been from Brian at Edgun west.
Has anyone else heard this? And has anyone given a reason?
Its got a ton of small springs and balls in it, I just think Ed and Brian don't want people taking it apart and messing something up, as its a lot different from traditional PCP airguns. Thanks for watching.
@@sub12airgunners That's what I assumed but he should have said it that way. He should have said if you take it apart there's a chance you won't put it back together properly. Which is just common sense. Not if you take it apart it's going to be ruined, and that's how he said it.
Edit: I'm going to try and find the post.
25:55 Where's the patent information?
👌👏👍
👍 Thanks for watching.
Quá phức tạp
Tặng cho người có đam mê như tôi nào 😂😂😊😊
Mo ước dc một khẩu như thế này chơi
I wish the lower wasn't plastic. It's the only thing I don't like about it.
Too be honest I don't mind the plastic, its proper ballistic polymer and feels high quality. But each to there own, Thanks for watching.
Đẹp quá
😀