Anothr cracking video Jeff, great explanation as always of how things fit to gether and how they work, brilliant watch, thank you as always for your time in doing these for us, Cheers 👌👌👌👌👌👌👍👍👍👍👍👍👍👍
But no manufacturer would want outsiders messing with the airfuns when they could be paid to do the job. I'm astounded by the sheer number of o-rings, probably only beaten by the twin reg FX maverick. I've lost faith in multi o-ring guns and gone old school simplicity, working the 'sweet spot'. Air arms S200 (CZ). Essentially only 4 o-rings that are permanently under pressure, and very accurate. No bendy barrel under pressure (when it should really be in tension to keep it straight!). Reliability in the field to me is paramount. This screams 'unreliable' to me and would be an absolute sod to dry after a shoot in the rain. @sub12airgunners
I am an airsoft enthusiast in China. The structure of fx drs is the structure where the barrel is inside the air reservoir. I designed it fifteen years ago. It’s just that it is an illegal product in China and cannot be processed. So gave up. . I also have an idea here, which is an open hammer structure air gun. When the valve block is rotated, the chamber is loaded at the same time. Which air gun company of yours designed it first, it is also the latest structure.
6:50 if internal oring is damage, it will leak from top screw(weaver screw), 14x2 nbr90. Simple to replace, u just need pickup and pinzete or to remove cocking and push via e.g. those chines woods 😊
Thanks, interesting video as always! Seems to me the machining is a bit rough on these and there seems to be more "leftovers" and marks from it. Accuracy issues in my opinion come from their lack of tuning/adapting for sub12 shooting. You might find the liner is a "heavy" slug liner, 1:18, for your use a pellet 1:24 liner would be much more accurate. Might be worth a try. Add the carbon sleeve while you're at it, it helps a lot with barrel harmonics. I've been chasing small and slow leaks on my Maverick lately. Fix one, next one pops up in a short while. Rifle is from 2020 and has had around 30k shots fired through it with no problem at all up until this began, other than the cocking rod bending slowly over time, which i replaced with a titanium one about half a year ago. Simple matter of maintenance in my opinion, i'm going to take the rifle completely apart to replace all the o-rings and that will most likely make it last another 3-4 years without any leaks. The complete o-ring kits are very cheap, so i'm not bothered by it at all. The rings i've replaced so far were the plenum body one closest to the block and the one before that, the second regulator body one (replaced the reg with a Huma one while at it, very satisfied with that one) and the tiny valve pin one. The rifle has been shooting at high power all its life so far, in .25 and .30 at 80 and 130 ft/lbs. My standard distance is 95 meters and its sub-moa with ease. Mod parts as far as internal/performance are the Huma reg, carbon liner sleeve, better gauges, 300bar bottle, hammer spring and the hammer.
I see that you are also a very professional enthusiast. Like me, I designed the fx structure fifteen years ago. EAE has a left-hand loading structure, which was also designed fifteen years ago. Which country are you in?
@@sub12airgunners O ring hard as hell, luckily a spare was supplied, and he lubed it up if you pardon the expression. You would think they’d supply a dust plug too, but that’s FX for you.
Have to thank you for taking the time so provide such explanations in a clear video. This explains how the rifle works and I've changed my mind on one, so I’ll be buying one. I’d fit a new rifled barrel as standard but I don’t like FX barrels/sleeves and don’t like that there is the same temperamental o’ring arrangement between such. Even with a thicker rifled barrel, I'd look at a couple of de-pingers, possibly under spring pressure, to both inside wall and barrel in order to help with barrel harmonics/movement. The brass hammer spring guide could be slimmed and a delrin top hat sleeve fitted over to combat future rubbing and fouling. Haven’t seen the block but could a new valve seat be produced, without the large opening, so that there is less wasted air pressure (filling the large current volume of the valve seat) when air passes between valve pin and transfer port? Seems unnecessarily large, presumably one for all rifles of any power.
Hi, very nice videos and nice work. I am learning a lot. I am trying to fill up an FX drs with a hand pump. Unfortunately it is at zero pressure now. I felt air coming out from the plug you show @23:30 is it normal? It does have a pellet in the barrel, when I open the sidelever, air scapes out, back in the pellet probe hole. If I close it, air leaks through the plug @23:30. Would be nice to know If something is wrong before filling with air (Not wasy from zero with a hand pump any hint) If it an oring there, I would need to empty it again to solve the issue. Best Regards.
Really good video recently stripped mine down and didn't notice if their was any specific way the impulse valve seat went back in is their a specific orientation it goes in as I've noticed an embossed half moon shap at the back of it does this need to line up in anyway thanks again for a great video
again fx are pretty good for taking apart this one no exception . perhaps a little bit if you magic barrel polishing may also help . will be interesting to see if it goes back together and is a tad more accurate. what does amaze me is fx barrels . buddy of mine has one of those and it’s accurate. how ever lot of the boy have had impacts and some were excellent and some are not so good . pretty sure the barrels are not very consistent . weather it’s there manufacturing proses who knows .
Excellent vid, very informative. Many thanks. Saying that though it's confirmed my thoughts on this gun, I'll be avoiding it like the plague 😊. A few years ( or even sooner) me think's there's gonna be a lot of poorly rifles that have been messed with trying to replace the one of many seals 😮
Nice work Jeff, a bit surprised there’s no carbon barrel liner liner or whatever FX call it fitted as standard. I found slight improvement in accuracy and consistency when I fitted one to my Dreamline FT. Great video as always 👍
Great video. Well put together and much better than most found on RUclips. Have you managed to get it back together and test it yet. I've been debating purchasing one of these myself. How bad was the accuracy you were experiencing? I was debating a .22 version to replace my old but still going strong air arms s310. Just fancy a change really. Looking at the solid block that is the plenum blank . It looks like you could put an adjustable volume adjuster into that which would allow finer tuning perhaps? Anyway thanks for the post really good👍.
Great video again, it's a very interesting rifle this is. I wonder if Fx will do a twin cylinder version, over and under style with the bottom one slightly shorter. I'll give them 3 months to think about that one lol.. Great work again. 👍
How do I know how I have to angle the valve seat? Just changed the inner o-ring because of a leak, but I cannot find any explanation of how much to angle and which direction to angle the seat
Hi, Would it not be advantageous to create a sleeve for the transfer port to help with efficiency ( keep the expansion behind the pellet ) as that does look to be a large transfer port for a .177cal rifle.
I'm new to the airgun world what is the difference between the regular plenum, and the high power one if the regular plenum is just a block with no volume they say one is so many cc and the SHP plenum is more? Why didn't they just make the block thinner and then they wouldn't have had to cut the stock out for it?
The plenum is the chamber where the rifle gets the air from .the regulator is the part that fills the plenum from the cilinder or botlle.to a set pressure .so the rifle shoots with the same pressure
@@HD-ph1dc you fill the gun cilinder with 235 bar .the regulator brings that pressure to 100 bar or so(or less or more where the law has a max legal power output )in the plenum .so you get a constant pellet speed .til the gun cilinder pressure get under the reg pressure .and then you need to refill the gun
This is the same gun as the Pro and all the pro's have the tall plenum. Maybe is so they can just make a cheap stock for the classic and shove a pro style assy into it with different barrel lenghts and sell for $1300 cheaper to get some rifles. The classic in a 700mm is a pro minus slug kit and trigger.
Interesting air rifle to see inside. Bit hard to tell on screen but the machining doesn't look too bad on them. Not the worst built rifle I have seen, although the loose valve plug did make me chuckle.
Aup mate. Wondered if you might have an idea. My fill probe went bang the other day and since then my rifles extreme spread has been around 45fps. Took it apart and found no issues, took it to the range and it would settle on 698 for a bit, drop to 666 then back up to around 705 and now it's staying there with a 5fps extreme spread. Any idea what could be causing that? I'm going to keep the chrono on it at all times for a bit to see if there are any changes.
Hello, maybe you can help. got myself a new FX DRS and a hand pump, but i can't get the air into the rifle, any idea what im doing wrong? :( (FX pump too) Think the air is leaking around the connection into the rifle.
Can you recommend a gauge to check the plenum pressure on a DRS. I'm replacing the solid sub 12 with the standard one. Many thanks. Ps great content very informative.
I have a leak in my drs and I can’t seam to find it, I changed the plenum, angle block and meter, and slug probe. I have resealed and checked the areas and still leaks down 200psi in two hours, any suggestions would be greatly appreciated
Quick question for you. What size threads are used for the main pressure gauge on the block is it 1/8 BSPP? Also I love your videos I’m so glad you made this ❤
There seems to be a large variation in accuracy with these guns, what I will say is I got mine a week ago it’s in walnut it has an a-tec wave moderator and a hawke compact scope and I picked up a box of qys domed not knowing if they were suitable and at 30yrs I’m getting pretty much pellet on pellet…..and though I’m sure it’s because the gun is fun to shoot I seem to get through a load of pellets without realising it but that’s an illusion is just because the rifle is a great crack to shoot and for £1216 including new scope moderator and pellets this rifle is hard to beat…..saying that I’ve already been lured by another rifle the FX CROWN MK 2 and while I’m speaking of the fx crown can anyone tell me if it’s worth putting a 600mm barrel on the fx crown mk2 in sub12 ftlbs or should I stick to the standard barrel that comes with the rifle.
What caliber is that rifle ?, please. I am trying to make sense of the regulator disc count. I am seeing 8, 11 and 12 count so far for the DRS classic. I see that rifle has 11. Mine is a .25 cal/700mm sold in the USA and it also has 11. Thanks
Manufacturers sometimes rush products into production, foisting potential problems onto the buying public. Maybe just sending them out to independent testers like your self would be a good idea.
Sub 12 UK - 'make sure there's no air trapped inside the plenum'. Well I'm told that the 'plenum' is completely false and only a solid block of metal. What's the truth please??
Fifteen years ago, I also designed the current EAE airsoft model, which has a left-hand loading push rod on the outer ring of the gas cylinder. That is to say, after firing, there is no need to use the right hand to pull the bolt. I thought about and designed the mechanism of loading the gun by pulling back with my left hand fifteen years ago. Because it is a contraband in China. My design cannot be implemented. . . I'm depreesed
When compared to other rifles, with quality parts and simple design, I'd say it was good value for money. I'm a critic of FX, don't like the DRS breech block design, but wouldn't describe a couple of niggly issues, far fewer than most rifles have, as rubbish.
I am an airsoft enthusiast in China. The structure of fx drs is the structure where the barrel is inside the air reservoir. I designed it fifteen years ago. It’s just that it is an illegal product in China and cannot be processed. So gave up. . I also have an idea here, which is an open hammer structure air gun. When the valve block is rotated, the chamber is loaded at the same time. Which air gun company of yours designed it first, it is also the latest structure...
🤗 nice explanation, and no adverts . Thankyou for making the video
Great video Jake. Looking forward to you showing FX how it should be done 👍
Anothr cracking video Jeff, great explanation as always of how things fit to gether and how they work, brilliant watch, thank you as always for your time in doing these for us, Cheers 👌👌👌👌👌👌👍👍👍👍👍👍👍👍
thank you 🙏 thanks for watching 👍
All manufacturers should pay you to do this great video very informative
I appreciate that!
But no manufacturer would want outsiders messing with the airfuns when they could be paid to do the job. I'm astounded by the sheer number of o-rings, probably only beaten by the twin reg FX maverick. I've lost faith in multi o-ring guns and gone old school simplicity, working the 'sweet spot'. Air arms S200 (CZ). Essentially only 4 o-rings that are permanently under pressure, and very accurate. No bendy barrel under pressure (when it should really be in tension to keep it straight!). Reliability in the field to me is paramount. This screams 'unreliable' to me and would be an absolute sod to dry after a shoot in the rain. @sub12airgunners
I am an airsoft enthusiast in China. The structure of fx drs is the structure where the barrel is inside the air reservoir. I designed it fifteen years ago. It’s just that it is an illegal product in China and cannot be processed. So gave up. . I also have an idea here, which is an open hammer structure air gun. When the valve block is rotated, the chamber is loaded at the same time. Which air gun company of yours designed it first, it is also the latest structure.
so detailed and well put together video, just pure insight and no bs! ty for valuing our time
Glad you liked it!
6:50 if internal oring is damage, it will leak from top screw(weaver screw), 14x2 nbr90. Simple to replace, u just need pickup and pinzete or to remove cocking and push via e.g. those chines woods 😊
Fantastic I only asked you if you were doing a video for the drs a few weeks ago and here it is. Very informative Thankyou!
Glad it was helpful!
Oh my god yes!!!!!! He actually posted it thank you so much❤❤❤❤
thanks for watching 👍
Thanks, interesting video as always!
Seems to me the machining is a bit rough on these and there seems to be more "leftovers" and marks from it. Accuracy issues in my opinion come from their lack of tuning/adapting for sub12 shooting. You might find the liner is a "heavy" slug liner, 1:18, for your use a pellet 1:24 liner would be much more accurate. Might be worth a try. Add the carbon sleeve while you're at it, it helps a lot with barrel harmonics.
I've been chasing small and slow leaks on my Maverick lately. Fix one, next one pops up in a short while. Rifle is from 2020 and has had around 30k shots fired through it with no problem at all up until this began, other than the cocking rod bending slowly over time, which i replaced with a titanium one about half a year ago. Simple matter of maintenance in my opinion, i'm going to take the rifle completely apart to replace all the o-rings and that will most likely make it last another 3-4 years without any leaks. The complete o-ring kits are very cheap, so i'm not bothered by it at all.
The rings i've replaced so far were the plenum body one closest to the block and the one before that, the second regulator body one (replaced the reg with a Huma one while at it, very satisfied with that one) and the tiny valve pin one.
The rifle has been shooting at high power all its life so far, in .25 and .30 at 80 and 130 ft/lbs. My standard distance is 95 meters and its sub-moa with ease.
Mod parts as far as internal/performance are the Huma reg, carbon liner sleeve, better gauges, 300bar bottle, hammer spring and the hammer.
I see that you are also a very professional enthusiast. Like me, I designed the fx structure fifteen years ago. EAE has a left-hand loading structure, which was also designed fifteen years ago. Which country are you in?
My mate bought the wood stock, it fills from the other side, within a few fills it had clipped the first O ring on the probe which prevented filling
that doesn't sound good 😲
@@sub12airgunners O ring hard as hell, luckily a spare was supplied, and he lubed it up if you pardon the expression. You would think they’d supply a dust plug too, but that’s FX for you.
Have to thank you for taking the time so provide such explanations in a clear video. This explains how the rifle works and I've changed my mind on one, so I’ll be buying one.
I’d fit a new rifled barrel as standard but I don’t like FX barrels/sleeves and don’t like that there is the same temperamental o’ring arrangement between such. Even with a thicker rifled barrel, I'd look at a couple of de-pingers, possibly under spring pressure, to both inside wall and barrel in order to help with barrel harmonics/movement.
The brass hammer spring guide could be slimmed and a delrin top hat sleeve fitted over to combat future rubbing and fouling.
Haven’t seen the block but could a new valve seat be produced, without the large opening, so that there is less wasted air pressure (filling the large current volume of the valve seat) when air passes between valve pin and transfer port? Seems unnecessarily large, presumably one for all rifles of any power.
thanks for watching 👍
Great informative and professional video mate. 👍
thanks for watching 👍
Looking forward to the next video to see if you can improve the accuracy of this rifle 👍
hoping so it would be fantastic if it was a bit more accurate
Nice clear guide...thanks for posting 🙂
My pleasure!
Hi, very nice videos and nice work.
I am learning a lot.
I am trying to fill up an FX drs with a hand pump. Unfortunately it is at zero pressure now.
I felt air coming out from the plug you show @23:30 is it normal? It does have a pellet in the barrel, when I open the sidelever, air scapes out, back in the pellet probe hole.
If I close it, air leaks through the plug @23:30.
Would be nice to know If something is wrong before filling with air (Not wasy from zero with a hand pump any hint) If it an oring there, I would need to empty it again to solve the issue.
Best Regards.
thank you for watching 😁
Thanks for the video my Internet friend, and thanks for sharing your knowledge, it's very helpful.
thanks for watching 👍
Really good video recently stripped mine down and didn't notice if their was any specific way the impulse valve seat went back in is their a specific orientation it goes in as I've noticed an embossed half moon shap at the back of it does this need to line up in anyway thanks again for a great video
Awesome video I like how you explain everything thanks for sharing this information be safe buddy 💯
thanks for watching 👍
The video I was waiting for 😂a long time, thank you so much
thanks for watching 👍
Been waiting for this video for ages lol hope you sort your accuracy issues as mine is amazing and more accurate than my ghost
that's good to hear love the gun so i hope we can make it a bit better
again fx are pretty good for taking apart this one no exception . perhaps a little bit if you magic barrel polishing may also help . will be interesting to see if it goes back together and is a tad more accurate. what does amaze me is fx barrels . buddy of mine has one of those and it’s accurate. how ever lot of the boy have had impacts and some were excellent and some are not so good . pretty sure the barrels are not very consistent . weather it’s there manufacturing proses who knows .
yes it seems they can be a bit random🙄 thanks for watching 👍
Excellent vid, very informative.
Many thanks.
Saying that though it's confirmed my thoughts on this gun, I'll be avoiding it like the plague 😊. A few years ( or even sooner) me think's there's gonna be a lot of poorly rifles that have been messed with trying to replace the one of many seals 😮
thanks for watching 👍
I really liked this tear down, great job.
Thank you 😁
Nice work Jeff, a bit surprised there’s no carbon barrel liner liner or whatever FX call it fitted as standard. I found slight improvement in accuracy and consistency when I fitted one to my Dreamline FT. Great video as always 👍
yes nothing on the drs they fit them on the panthera and king as standard
Great strip down video. Thanks for posting this .... 👍
thanks for watching 👍
Excited to see how you will make it accurate.
If it's a barrel change that's required then shame on FX for selling inferior products at that price.
thanks for watching 👍
Great video. Well put together and much better than most found on RUclips. Have you managed to get it back together and test it yet. I've been debating purchasing one of these myself. How bad was the accuracy you were experiencing? I was debating a .22 version to replace my old but still going strong air arms s310. Just fancy a change really. Looking at the solid block that is the plenum blank . It looks like you could put an adjustable volume adjuster into that which would allow finer tuning perhaps? Anyway thanks for the post really good👍.
14:43 может этот поршень является отбойником для ударника? Он случайно не выглядывает в шахте ударника?Или это заправочный поршень?
Another great video lads thanks for the effort 👍
Our pleasure!
Any plans to do a video with the different plenums, Air extension tube and barrels? Great context as normal thanks for taking the time to make them
thanks for watching 😁 we are getting through the list 👍
Great video again, it's a very interesting rifle this is. I wonder if Fx will do a twin cylinder version, over and under style with the bottom one slightly shorter. I'll give them 3 months to think about that one lol.. Great work again. 👍
Shorty !! 💕
bring it on 👍👍
Coming soon!
How do I know how I have to angle the valve seat? Just changed the inner o-ring because of a leak, but I cannot find any explanation of how much to angle and which direction to angle the seat
Really good video. Could you link that "Bipod mount" or description and part number you added to that rifle, please. Thanks
that's an accu-tac br4 g2
Do you have to bleed the air out of the gun before fitting a new pellet probe
Hi,
Would it not be advantageous to create a sleeve for the transfer port to help with efficiency ( keep the expansion behind the pellet ) as that does look to be a large transfer port for a
.177cal rifle.
yes it maybe we do that with the airmaks guns and it works very well
I'm new to the airgun world what is the difference between the regular plenum, and the high power one if the regular plenum is just a block with no volume they say one is so many cc and the SHP plenum is more? Why didn't they just make the block thinner and then they wouldn't have had to cut the stock out for it?
The plenum is the chamber where the rifle gets the air from .the regulator is the part that fills the plenum from the cilinder or botlle.to a set pressure .so the rifle shoots with the same pressure
@@peteralexben so the plenum is hollowed out a certain volume for pressurized air.
@@HD-ph1dc you fill the gun cilinder with 235 bar .the regulator brings that pressure to 100 bar or so(or less or more where the law has a max legal power output )in the plenum
.so you get a constant pellet speed .til the gun cilinder pressure get under the reg pressure .and then you need to refill the gun
@@peteralexben thank you.
This is the same gun as the Pro and all the pro's have the tall plenum. Maybe is so they can just make a cheap stock for the classic and shove a pro style assy into it with different barrel lenghts and sell for $1300 cheaper to get some rifles. The classic in a 700mm is a pro minus slug kit and trigger.
Interesting air rifle to see inside. Bit hard to tell on screen but the machining doesn't look too bad on them. Not the worst built rifle I have seen, although the loose valve plug did make me chuckle.
yes it's not bad, i really like it just want it a bit more accurate
Everything on my new rifle was way loose, also leaks out end of barrel.
Aup mate. Wondered if you might have an idea. My fill probe went bang the other day and since then my rifles extreme spread has been around 45fps. Took it apart and found no issues, took it to the range and it would settle on 698 for a bit, drop to 666 then back up to around 705 and now it's staying there with a 5fps extreme spread. Any idea what could be causing that? I'm going to keep the chrono on it at all times for a bit to see if there are any changes.
Hi their I’ve got a brand new drs and went to fill and seems to be air coming out of where probe goes in . Any ideas please 🙏
Hello, maybe you can help. got myself a new FX DRS and a hand pump, but i can't get the air into the rifle, any idea what im doing wrong? :( (FX pump too)
Think the air is leaking around the connection into the rifle.
Hi Jake, great vid, can I ask if that piccatiney adapter would fit on a r10? Thanks
Come to my rescue again with a tiny air leak which is now fixed. Great video as always and can you do one for a full rebuild
nice glad it helped, full re-build is on it's way
small plenum what is the purpose of na block under then valve
I am thinking of owning an FX. Just wanted to know, what is the lifespan on one before you have to replace parts?
Can you recommend a gauge to check the plenum pressure on a DRS. I'm replacing the solid sub 12 with the standard one. Many thanks. Ps great content very informative.
i like the Sekhmet gauge the gen 2 are great
I have a leak in my drs and I can’t seam to find it, I changed the plenum, angle block and meter, and slug probe. I have resealed and checked the areas and still leaks down 200psi in two hours, any suggestions would be greatly appreciated
Quick question for you. What size threads are used for the main pressure gauge on the block is it 1/8 BSPP? Also I love your videos I’m so glad you made this ❤
A very interesting video.
Glad you enjoyed it
Does the barrel assembly allow for an fx carbon barrel stiffener?? Hoping that might help some accuracy issues I've got
yes we tried the carbon stiffener so it fits fine 😀
There seems to be a large variation in accuracy with these guns, what I will say is I got mine a week ago it’s in walnut it has an a-tec wave moderator and a hawke compact scope and I picked up a box of qys domed not knowing if they were suitable and at 30yrs I’m getting pretty much pellet on pellet…..and though I’m sure it’s because the gun is fun to shoot I seem to get through a load of pellets without realising it but that’s an illusion is just because the rifle is a great crack to shoot and for £1216 including new scope moderator and pellets this rifle is hard to beat…..saying that I’ve already been lured by another rifle the FX CROWN MK 2 and while I’m speaking of the fx crown can anyone tell me if it’s worth putting a 600mm barrel on the fx crown mk2 in sub12 ftlbs or should I stick to the standard barrel that comes with the rifle.
Great stuff man, thanks for sharing. 👍
Thanks for watching!
What caliber is that rifle ?, please. I am trying to make sense of the regulator disc count. I am seeing 8, 11 and 12 count so far for the DRS classic. I see that rifle has 11. Mine is a .25 cal/700mm sold in the USA and it also has 11. Thanks
this one is a sub 12 ftlb .177cal 500mm barrel
I've heard there is a problem with air leaks from the barrel, is this why the gun is not available in any shop as you can only pre order?
our one is ok no leaks so far 👍
@@sub12airgunners Mine leaks out end of barrel and brand new, .25/700mm. i have not figured out why yet 😖
Manufacturers sometimes rush products into production, foisting potential problems onto the buying public. Maybe just sending them out to independent testers like your self would be a good idea.
i think they do send them out but maybe not so independent 👍
I found that my new rifle everything thing was loose, at least 1/2 turn from hand tight only. the barrel nut was a full turn loose.
Nice sir love it
thanks for watching 👍
Nice!👍🏻
thanks for watching 👍
Great video😁😁😁
Thanks 😁
What is a power plenum? Power Plenum as Pressure Regulator?
it is just a space for regulated air to be stored until the gun is fired and then the air is released 👍
@sub12airgunners Which rifle is better: FX DRS 500 or Leshiy 2?
What's the diameter of the shroud cover the barrel?
it's the cylinder and it's 34mm od 😀 Thanks for watching 🙏
great vid Jeff , and a good precision made rifle , but there are too many o rings . the slogan keep it simple stupid is a old one .but still valid
thanks for watching 🙏
Hi,
Are you planning to make any tools to sell through your ebay site, such as a valve seat removal tool and a valve cap removal pin tool.
Hi yes we will be soon hopefully 👍
@@sub12airgunners Hi,
Thanks for the reply it's always good to get your insight.
Beautiful
thanks for watching 👍
Thank you
thanks for watching 👍
soooo instead of buying the bigger plenum just hog out the alu block, add a bigger 0-ring to seal it and save yourself 90 bucks.
you could do that 👍 thanks for watching 👍
Nice.😊
Thanks 😊
nice one 😁😁
👍🏻👍🏻👍🏻
thanks for watching 👍
@@sub12airgunners any chance you could make me a cocking handle for my red wolf it has the short throw lever on it 😁😁👍🏻
👏👏👏👏👌👍
Sub 12 UK - 'make sure there's no air trapped inside the plenum'. Well I'm told that the 'plenum' is completely false and only a solid block of metal. What's the truth please??
There is still some space in the breech block, which is a plenum for sub12.
yep just a solid block of aluminium
Saya suka video anda👍
thank you 👍😀
Fifteen years ago, I also designed the current EAE airsoft model, which has a left-hand loading push rod on the outer ring of the gas cylinder. That is to say, after firing, there is no need to use the right hand to pull the bolt. I thought about and designed the mechanism of loading the gun by pulling back with my left hand fifteen years ago. Because it is a contraband in China. My design cannot be implemented. . . I'm depreesed
Loving the fake submariner 😂👍
it's a Seiko i just got the parts from ali and made it, i got an unbranded diel but the strap came branded 😁
First👍
thanks for watching 👍
Components are quite scungy. Typical of FX. Not a fan of this over priced brand. There are much better pcp's out there and cheaper as well.
FX DRS cheap and nasty and high prices for rubbish.
When compared to other rifles, with quality parts and simple design, I'd say it was good value for money. I'm a critic of FX, don't like the DRS breech block design, but wouldn't describe a couple of niggly issues, far fewer than most rifles have, as rubbish.
I am an airsoft enthusiast in China. The structure of fx drs is the structure where the barrel is inside the air reservoir. I designed it fifteen years ago. It’s just that it is an illegal product in China and cannot be processed. So gave up. . I also have an idea here, which is an open hammer structure air gun. When the valve block is rotated, the chamber is loaded at the same time. Which air gun company of yours designed it first, it is also the latest structure...