Hi Ernest, nice video ! Why do you advice not to fill more than 25 bar above reg pressure ? I have a drs in .177 the reg is set to 110 bar (from factory) but I noticed reg creep from 230 bar to about 160 bar. I gave it a little more hammer and now the creep is acceptable. I also noticed this with my dreamline, also reg creep when fully pressurized. I wonder if the fx regs can handle the pressure difference. What is your oppinion ? Thanks
As soon as I seen you tightening bolts with an electric screwdriver, you were dead to me. I would never have you work on something of mine, ever.
Keeping up with the fx airguns leaky issues always. Poor designs leaks everywhere. That’s a brand new gun leaking.
I have a cold sweat when I see ball end hex keys, people say never use them for a good reason.
Do you lubricate the o ring before you install it?
Hi Ernest, nice video ! Why do you advice not to fill more than 25 bar above reg pressure ? I have a drs in .177 the reg is set to 110 bar (from factory) but I noticed reg creep from 230 bar to about 160 bar. I gave it a little more hammer and now the creep is acceptable. I also noticed this with my dreamline, also reg creep when fully pressurized. I wonder if the fx regs can handle the pressure difference. What is your oppinion ? Thanks
Very nice 👌 👍
Thank you! Cheers!
Hi there Ernest! I really like your tutorials but whats up with your voice??
Most people can read English, but not my accent and also quicker to edit. Planning to do an intro with my voice first then go silent 😅
Hi is this a sub 12 model?
Hi, no its not. Haven’t seen a 12fpe model
😋
And yet another FX repair😂
You say max fill is 230 bar at end of video BUT earlier you say fill to 25 of reg, what hood is 25 bar over reg, really not sure what you meam
Sorry talking about 25fps above reg setting. Video coming on this subject
Hi, Ernest. Is this plenum for sub 12 or is it for fac rated rifle? Thanks