Thanks alot ... but if i want to increase the power .... should i use jets with bigger or smaller size ?? I mean will 0.7mm or the 0.9mm give more power .. ?
Hi there, I have the leishy 2. I have 2 x .8 jets and the full open puck im only at 10ftlb. Would you think I need to increase the regulator pressure? Or go smaller on the jets?
The Jets control the speed in which the main valve closes after the rifle has been shot, the larger the two jets are, the quicker the valve closes and therefore the power will be lower, the smaller the jets are the longer the valve will remain open and the power will be higher. thanks for watching.
I've noticed on some Leshiy 2 videos rather than having 2 valves with openings, one is just a blank or a screw while the other is a valve of a certain size. I wonder if this makes for a more consistent air flow? Also, I'm sure you've read on edgun West or Francisco's site that the sum of, or if you're using just the one valve and a blank, should not be more than 1.7.
I think the blank is more for the FAC versions, the ones with the blank in seem to use one very small jet (0.2mm / 0.3mm) to delay the closing of the valve, in order to achieve the most power, but I have just completed machining of a set of jets (0.2mm - 1.4mm) so I soon will be having a play around with the different configs, I have read that the sum of the two valves does not need to exceed 2.0mm but I didn't know there was a limit on one single valve ill have another look on the EDgun websites though so thanks. Thanks for watching.
The MK1 was a great gun as well, but the L2 is probably the best rifle I have ever handled, and unfortunately that's whys its the price it is. Thanks for watching.
This was the first time with the rifle and I just took it apart to show you whats inside, you need to take it apart to change the power jets and I wanted to see which ones were installed on my rifle. Thanks for watching.
I thought that it was explained at the beginning of the video, that the official videos on this process were animations and it was felt that a video of the process actually being undertaken might be of benefit. I could be wrong.
Great demonstration. Thanks for sharing. I like your neat slow info sharing.
Glad it was helpful!
I just love your vids, thanks for explaining things.
Glad you like them! Thanks for watching.
Thanks alot ... but if i want to increase the power .... should i use jets with bigger or smaller size ?? I mean will 0.7mm or the 0.9mm give more power .. ?
The smaller jets will give you more power, 0.7mm will give more power than 0.9mm. Thanks for watching.
@@sub12airgunners thanks for replying.. hope the best for you .. good luck
Hi there,
I have the leishy 2. I have 2 x .8 jets and the full open puck im only at 10ftlb. Would you think I need to increase the regulator pressure? Or go smaller on the jets?
Oh thanks for all the videos. Extremely helpful
Nicely done video, clear and concise. Please make some more :-)
Great vid friend! Subbed to you. It would be nice if you could full disassemble the main valve :) Your commentary is great. Keep going
Thanks, I hope to do a full disassembly in the future not quite ready yet but its on the cards. thanks for watching.
Thank you for the video. It seems there are 3 parts dealing with the fpe, the puck, power jet and reg.
Yep, bit of a juggling act with the 3 variables, but that's part of the fun. Thanks for watching 👍
Great video buddy!
Thanks for posting
No problem 👍
Thank you it’s very useful video , am wondering ! the jet valves doing what ?
The Jets control the speed in which the main valve closes after the rifle has been shot, the larger the two jets are, the quicker the valve closes and therefore the power will be lower, the smaller the jets are the longer the valve will remain open and the power will be higher. thanks for watching.
@@sub12airgunners Thanks for this explanation.
Hi Can I ask when you ordered your gun, ei what was the wait time? I have one on order but don't want to keep bothering Francisco.
Sorry missed this message, I ordered mine in early October and received it just before the end of the year on the 29th of December, I hope that helps.
Hello. Which silikon grease do i need for the orings? Or is it not necessary?
any good silicon grease will do the job abbey is a good one
I've noticed on some Leshiy 2 videos rather than having 2 valves with openings, one is just a blank or a screw while the other is a valve of a certain size. I wonder if this makes for a more consistent air flow? Also, I'm sure you've read on edgun West or Francisco's site that the sum of, or if you're using just the one valve and a blank, should not be more than 1.7.
I think the blank is more for the FAC versions, the ones with the blank in seem to use one very small jet (0.2mm / 0.3mm) to delay the closing of the valve, in order to achieve the most power, but I have just completed machining of a set of jets (0.2mm - 1.4mm) so I soon will be having a play around with the different configs, I have read that the sum of the two valves does not need to exceed 2.0mm but I didn't know there was a limit on one single valve ill have another look on the EDgun websites though so thanks. Thanks for watching.
What size puck have you found works best for 12ftlb with the reaper regulator
Not had the Reaper reg yet, but on the standard reg I used a 4mm puck size for my set up. Thanks for watching.
Why are you removing it? What does it do?
Great vidio good gun, got the mk1 but i honestly dont think its worth the crazy price tag!
The MK1 was a great gun as well, but the L2 is probably the best rifle I have ever handled, and unfortunately that's whys its the price it is. Thanks for watching.
Great detail ,thanks.
Glad it was helpful!
Hi I agree very well explained
These nozzles are not included in a Leshiy 2 kit. At least mine was without them
I need fully disassembly video please ex drigger & safety barrel
Ill be doing one on the channel in the not so distant future so keep an eye out. Thanks for watching.
nice one 👍👍
Great video thanks 😊
No problem, thanks for watching.
No way this thing justifies a £2600 uk price tag. Way to overpriced for what it is..
I didn’t understand the purpose of taking it apart was it just to show people how or were you replacing something
This was the first time with the rifle and I just took it apart to show you whats inside, you need to take it apart to change the power jets and I wanted to see which ones were installed on my rifle. Thanks for watching.
I thought that it was explained at the beginning of the video, that the official videos on this process were animations and it was felt that a video of the process actually being undertaken might be of benefit. I could be wrong.