Thank you for such training repairs, revisions of Leshego2 parts, video !!! Continue your work for the benefit of the owners of this! Greetings from Kazakhstan!
@edgunwestLLC well what exactly is it bud I still haven't heard back from you I want to know so I can get the tool to adjust it up or down. Can you send me a picture of the tool and tell me which regulator is in it so I can get the tool please.
Hi is there a video how you can convert the normal leshiy 2 to air pistol with air tank under the barrel I can see this video have a photo of the 2 conversions rifle and pistol but inside the video there is no pistol setup.
Thanks as always with the great educational videos from you! Thinking instead of plyers, the tool that Ed uses in His videos when changing the reg, will you be selling that tool as well? Or I actually would not mind if they came with the L2 in the package. Thinking of getting yet another L2, for my Daughter in Christmas present, and when I would place the order also order the tool that Ed uses extra. So both She and I have one. I would also be totally great if you would sell that plastic tool you made, or if you have the specs, then people could 3d print the tool. Thanks in advance and take care and stay safe.
Thanks for that great vid. My o-ring broke at 170 bar when filling it the first time. Then I exchanged it according to your intruction and tried to fill it again. But again, it blew it off at around 170 bar, again. Anyone having any hint or advice what the reason may be?
I was having the same problem, the replacement o rings with the gun seem to be too thick and shear off when the cap on the regulator is put back on. I just tried uxcell 5mm id x 8mm od x 1.5mm width and it worked well. Got them from amazon. 250 bar held, no leaks and put about 32 pellets downrange.
I started witn a non REPR L2 and am installing the new regulator now. I have been trying for the last half hour to "clock" the gauge, and the valve end, so the gauge isnt interfering with the bottle, or the valve is vertically aligned with the butt plate. Ive tried unscrewing all the parts inline from the butt plate to the main valve, but it always clocks misaligned and interfering. Do I need to shim something?
Hmmmm Interesting looks like Edgun is a head of the other guys !!!! There no need for 2 regulators and a big plenum !!!! And it's a more solid build. Genius !!!!! Ok my mind is made up I'm staying with the Edgun. I have a special kind of love for Edguns. They just my go to every time !!!! Keep up the good work I'm with you guys to the end !!!!!!
Brian.1 Qustion i had a leak on the bleed screw. I pulled it out had a ball and a tiny tiny o ring. When i checked on the Illustrated parts catalog i didnt see any o ring there only the ball. Have you ever come across something like that??? sn59xx .it is a mod or some1 just put it there might be?? 250mm .22 cal EPR version. As i managed to put back everything nicely its not leaking now but im scare what will happen later on.
Thank you for such training repairs, revisions of Leshego2 parts, video !!! Continue your work for the benefit of the owners of this! Greetings from Kazakhstan!
These videos are pure gold. Cannot thank you enough for the training. Please continue them. Best to you, Mark in Colorado.
Благодарю Вас за такие, обучающие ремонту, ревизии деталей Лешего2, видео!!! Продолжайте свой труд на благо владельцев этого! Привет Вам с Казахстана!
Спасибо!!
1203 s̶e̶c̶o̶n̶d̶s̶ reasons why we’re lucky to have EDgun West in 🇺🇸 ‼️ Literally a masterclass in how to / instruction vid 👏
This video was VERY helpful to ME, as my REPR failed way early, but the repair was pretty easy with proper grease, and o rings.
Mine just went to leak after the first time filling lol, went to 170 bar and then poof.
And edgun doesn't even help, need to take care of it myself. Great support edgun!
Mine shows up today. Pretty excited
What brand do you recommend for the pressure gauge?
Awesome job, well executed 👏
Is this the regulator Brian that's in the gun you gave me and can I put a gauge like you did on this to see my pressure if I want
@@JohnVentarino-ey5ln not exactly
@edgunwestLLC well what exactly is it bud I still haven't heard back from you I want to know so I can get the tool to adjust it up or down. Can you send me a picture of the tool and tell me which regulator is in it so I can get the tool please.
When are the Lelya’s going to be available in USA?
What grease brand & product number are you using when your putting E.A.R. back in
So there's no gain getting bigger plenum even if I change to 600mm barrel or get a 30 cal?
I have a 350mm .25 cal
Do you need to degas to adjust up in pressure or can you adjust as you were going down in reg pressure?
You can adjust it under pressure. Remember when going down in pressure to dry fire the gun in between adjustments
@@edgunwestLLC thank you 👍
Hi is there a video how you can convert the normal leshiy 2 to air pistol with air tank under the barrel I can see this video have a photo of the 2 conversions rifle and pistol but inside the video there is no pistol setup.
Thanks !! great video as always.
Thanks as always with the great educational videos from you! Thinking instead of plyers, the tool that Ed uses in His videos when changing the reg, will you be selling that tool as well? Or I actually would not mind if they came with the L2 in the package. Thinking of getting yet another L2, for my Daughter in Christmas present, and when I would place the order also order the tool that Ed uses extra. So both She and I have one. I would also be totally great if you would sell that plastic tool you made, or if you have the specs, then people could 3d print the tool. Thanks in advance and take care and stay safe.
Tools are ordered should have them in a few weeks
@@edgunwestLLC Great! Thanks👍🏻
Thanks for that great vid. My o-ring broke at 170 bar when filling it the first time. Then I exchanged it according to your intruction and tried to fill it again. But again, it blew it off at around 170 bar, again. Anyone having any hint or advice what the reason may be?
Hi.
me too.
have already changed the o-ring 10 times.
regulator does not work
I was having the same problem, the replacement o rings with the gun seem to be too thick and shear off when the cap on the regulator is put back on. I just tried uxcell 5mm id x 8mm od x 1.5mm width and it worked well. Got them from amazon. 250 bar held, no leaks and put about 32 pellets downrange.
@@michaelgeorge1975
Hi.
5 x 1.5 mm is the standard seal
got my e.a.r. exchanged. now everything seems fine.
@@BobPanda
have the little plastic insert and swapped the ball.
Now it is ok
I started witn a non REPR L2 and am installing the new regulator now. I have been trying for the last half hour to "clock" the gauge, and the valve end, so the gauge isnt interfering with the bottle, or the valve is vertically aligned with the butt plate. Ive tried unscrewing all the parts inline from the butt plate to the main valve, but it always clocks misaligned and interfering. Do I need to shim something?
it doesn't need to be all the way screwed down,
I thought you couldn't adjust the regulator down against the tank pressure cause it could damage it.
Where to buy one from ?
Dude what is the name of the handgun style pellet gun shown in the video?
That is a Leshiy 2 taken apart
kapan bs punya gini
Hmmmm Interesting looks like Edgun is a head of the other guys !!!! There no need for 2 regulators and a big plenum !!!! And it's a more solid build. Genius !!!!! Ok my mind is made up I'm staying with the Edgun. I have a special kind of love for Edguns. They just my go to every time !!!! Keep up the good work I'm with you guys to the end !!!!!!
Brian.1 Qustion i had a leak on the bleed screw. I pulled it out had a ball and a tiny tiny o ring. When i checked on the Illustrated parts catalog i didnt see any o ring there only the ball.
Have you ever come across something like that??? sn59xx .it is a mod or some1 just put it there might be?? 250mm .22 cal EPR version. As i managed to put back everything nicely its not leaking now but im scare what will happen later on.
There is a delrin seal that was added. That is what you saw in the bleed screw