I know it's not practical for a off road build, but I would love to see a body work episode of Zack pulling out and fixing the BMW's dents to the best of his abilities.
I mean, I fixed the dents in my 99 Ram 1500 that's marked out for offroading bc it bugged me to have all the dents, its something of a monthly ritual lol
Quite a common occurrence if you live where it snows for more than a month. Especially on those suspension bolts. Pro tip: use some copper anti-seize or threadlocker when re-assembling to stop rust in the threads. Either one works.
Jobe: Uses the jack to loosen the bolt that is behind the hub. Me: “ohhhh... so I’ve just been an idiot with broken knuckles for the last several years.”
One of the first tricks I learned In the army and soooo glad (lucky) that I did. I thought It was common knowledge. It was just because everything we work on is big.
Just want to say i've now binged the entirety of moneypit in a under a week, all by my self.. until this episode where my dad sat down a minute before Zach decided to show how caked up he is..
Here's a tip that might help. Measure the stock shocks at ride height and then measure your coil overs. Adjust your coilovers to be longer than the stock shocks
I never thought I'd get back into cars ever since my failed project that just discouraged me after failing to complete it (sold it...) But after watching this channel I have realized a reborn attraction that has come to fruition. Thank you.
Now if they would actually take this to a shop that knows what they are doing while adjusting the coils for rally. Zach just adjusted the length, but damping + preload would be nice to see.
17:45 That's a hell yes from me too. I can't even remember how my stock suspension feels I've had mine on for so long now. She already cornered like a beast because its a 2 seater. Now I can pull a G easy tearing ass around turns even tight ones. And as a "bonus" theres one spot in the freeway close to me that I get the tiniest bit of air on when I go over it over 80. Yes our road around here are shit
Using the car jack to push the wrench when the bolt was rusted was genius level stuff. I have done my brakes so many times and end up using breaker bars and extenders and have never thought of that. Thanks for showing it!
I’m aware your still a young man but to save your hands you should put 1 bolt half way back in and then hit the inside of the tire with a rubber mallet if the wheel is stuck. More force and saves your palms. Apply a wire bush and nickel paste to the hub to make wheel removal easier in the future. Great channel and keep it up!
you gotta have big bucks for it. like, really big bucks. My mothet had a friend in college who came from a really rich family and started rallying. until he got to pro level he maybe spent a couple hundred thousands of euros
Hey Jobe! Glad you guys installed rear reinforcement plates. Recommend you consider front plates also. The front shock towers “mushroomed” on one of my E36’s due to running coilovers with no plates. Garagistic makes a nice set. Just a recommendation! Keep up the great content!
I don't really know my way around a car and have no intention of ever doing anything more than change a light bulb or add wiper fluid. But I just love listening to Zach walk me through how to tear a car apart and then put it back together again.
Two things. 1) I had coil overs on my E36, and they quite frankly sucked. One day after working on it, I forgot to reconnect the front sway bay, and from then on it was amazing. Very neutral handling, but with on demand oversteer that was very smooth, predictable, and very easily controlled. 2) In the factory tool kit on the inside of the boot lid there should be an alluminium bar that's threaded on one end, and knurlled on the other. That's a wheel locator to make fitting and removing the wheel bolts easy. Just remove the upper most bolt, and replace it with the bar, then remove the others. The bar will hold the wheel in place till you want to remove it. Fitting the wheels is just the reverse, and with the wheels being hubcentric, all your bolt holes will automatically line up.
It's no coincidence that you guys have 5+ mil subscribers. You guys are doing the kind of stuff that we talk about when we're stoned with the homies. Obtainable cars and realistic mods.
I don't know much about cars and I don't know that I'll ever have a money pit of my own (too many hobbies as it is) but watching this series makes me want to get into it!
Now it looks like any other Argentinian car! (due to the damaged road, most argentinian cars have raised suspension compared to the same car sold in another country)
I was just about to say, as a “Euro” myself, that tires falling off during mounting/dismounting is almost never the case - and especially not when you want it.
@@Snablarns Happens to all cars. 2 of my japanese cars had this problem. First was because of corrosion from washing the wheels. Second was a new used car I bought. I had a shop take it off for me first time since I needed to get a free rotation anyways. The second time it happened, I had to roll one of the wheels loosened lugs for a few times. Then I figured out once you have a little wiggle room, you can rock it back and forth and it comes loose easily
“Fit one finger in the rear” “fit 3 fingers in the front” “I’m going to use this big strong thing I have” “it feels firm yet subtle” Mix these quotes with Zack hiking his pants up to heaven just gave this video some much needed sexual tension
Having spent the last two years dailying a fullsize pickup with 35" mud tires I have to say that I now want ground clearance and big tires on everything. Not necessarily full offroad setup. But it is soooo incredibly nice being able to hop a curb to get out of a crowded drive-thru or run over the shoulder to get off a stopped highway to the frontage road. I can't tell you how many times I did something in my pickup that saved me aggravation and that was only possible because I could get over some minor obstacle. Call it "urban offroading" or "auto parkour", whatever. I'm convinced that a serious street car should have a minimum of 8-10 inches of ground clearance and enough travel to climb curbs or handle rough rail crossing with ease.
Jobe has no reason for being that damn caked up 🥵
Double cheeked up... On a Wednesday afternoon.
Sheeeesh
That boy got cake!😭
AYOOOOO
4:26
Hiring Zach Jobe was Donut Media’s best ever decision
Absolutely
Jerry Barry
I agree, 100%
Everyone I've seen on camera has been cool. I think that's only 4-5 people but yeah. No duds here
Other than having a show on tv
He wasn't kidding about the angles. Look at that leg up on the jack!
Zach is like 70% leg and I’m here for it
ruclips.net/video/xBmdmOzhxyc/видео.html
@@vanbusto8870 🖕🏼🤡🖕🏼
@@vanbusto8870 will you shut up, man?
“One finger in the rear,” would be a solid Donut shirt.
ruclips.net/video/xBmdmOzhxyc/видео.html
And 4 if youre really tryin (on the back)
@@AcornFox hahaha, I'll take two. Well done boys.
That’s some quality RUclips comments! 😂👍
@@AcornFox oh yes daddy
the fact that 4:28 was the most replayed is just awesome
He's got a quality ass
Next mod is. Skidplates to save that oil pan just in case if there were rocks in the dessert
Skid plate should be priority on German manufacture cars
Could also just space the engine mounts up a few mm’s with washers. The pan sits jussst below the subframe on these cars.
I learned this the had way
I hate when I’m munching on some ice cream and then WHAM rock😩
Yeah, the oil pan getting hit would be a bad time
"one finger in the back to a solid 4 if you're trying" things are really heating up at Donut these days
ruclips.net/video/xBmdmOzhxyc/видео.html
They have been in quarantine for over a year I dont blame them
"Everything feels nice and tight, and that's what I want."
-Zach Jobe
ruclips.net/video/xBmdmOzhxyc/видео.html
i hate my mind
Headline: "Zach Jobe Gives Aging German 3 Fingers in the Front and One in the Rear"
Zach Jobe a man who knows what he wants
Firm yet supple 😉
Not gonna lie, a little "Gawd daaaammmn" slipped out when he hiked those jeans up.
ruclips.net/video/xBmdmOzhxyc/видео.html
Who didn’t let one out? Lmao
I didn't say it ....but I was thinking it
Make that screenshot into a shirt and i will rock out on special occasion
Im dying
I know it's not practical for a off road build, but I would love to see a body work episode of Zack pulling out and fixing the BMW's dents to the best of his abilities.
I mean, I fixed the dents in my 99 Ram 1500 that's marked out for offroading bc it bugged me to have all the dents, its something of a monthly ritual lol
,,and one they we’ll fix that fender”
Using the floor jack to loosen a stuck nut, genius!
Sometimes my genius is almost frightening
Quite a common occurrence if you live where it snows for more than a month. Especially on those suspension bolts. Pro tip: use some copper anti-seize or threadlocker when re-assembling to stop rust in the threads. Either one works.
ruclips.net/video/-ATx8E-AoBY/видео.html
Zach hoisting his drawers like that was the laugh I needed today 😂
The amount of sexual references that were in this episode and he didn’t laugh deserves a Emmy on its own “blow any holes out the back”
Firm yet supple
nice and tight
"one finger at the rear" "3 fingers at the front" SHOCKER!!!
"We went from one finger in the back to a solid three. You can even get four if you're trying"
"And in the front we had two and a half now we've got a pretty easy whole hand."
“It feels firm, yet, supple.” -Zach Jobe
ruclips.net/video/xBmdmOzhxyc/видео.html
I concur, firm yet supple. Indubitably.
This is underrated
@@trashcandy1234 this is also underrated
@@zwabbah4841 this comment is not underrated due to being said all the time
16:41 " if i hit i jump, i might survive it"
behind him, a huge graffiti on the wall says BELIEVE
Never in a million years would I have thought to hear you say the stock suspension is too low
In Canada they're always too low
@@mrhead5823 I live in northern Quebec, I know the pain 😔
@@heyitsjay2053 tes un queb?
@@heyitsjay2053 Salut from New Brunswick ✌🇨🇦
@@raoulmori7102 ouain and tbh I hate it lol
“Im going to use this big strong thing I have.”
Oh, myyyyy.
ruclips.net/video/xBmdmOzhxyc/видео.html
@@vanbusto8870 we dont wanna watch your shit stop putting it on every comment
@@vanbusto8870 🖕🏼🤡🖕🏼
Money pit is the only reason I ever realize its Wednesday.
Bruh fr
ruclips.net/video/xBmdmOzhxyc/видео.html
@@vanbusto8870 dude stop holy shit
Glad I’m not the only one who checks daily to see if they “have it”
ruclips.net/video/xBmdmOzhxyc/видео.html
@@vanbusto8870 wtf why?
Everytime Zach said "Felipe!" I freaked out a bit, like, what did I do wrong this time?! 😅
Dude these guys have some of the best cars for this and know what to do whilst not being boring
Zach is basically car Jesus now with that beautiful hair of his.
Stupid luscious locks of furry!
he needs a poster made as CarJesus. thats the rule
Ian McCullum a.k.a. GunJesus has his poster :)
would do for a cool competition XD
Making jesus jokes is weird for me.
Lmao 🤣🤣 car Jesus
We need a donut Jesus shirt. Now
This channel is the PERFECT mix of educational, entertaining, and comedy. Not a single episode that doesn't make me laugh
“We went from one finger in the rear to 3, maybe 4 if you’re trying.” - Zach Jobe
"I need a haircut"
Don't you dare. I would fire you.
I was about to say the same thing
ruclips.net/video/xBmdmOzhxyc/видео.html
pls zack u should get a haircut.
@@vanbusto8870 you realise that anyone that clicks on that link will dislike the video you’re linking right? Not good for promotion imo
@@twanlange2827 But even dislikes will thrust his video higher in the algorithm, same with hate comments. They look at engagement, not performance
“Looks about one finger in the rear”
Yeah that’s about all she likes 🤣
Maybe a thumb
I was looking for a comment like this 😄
Go outside, walk down to the street, and pull your mind out of the gutter.
ruclips.net/video/xBmdmOzhxyc/видео.html
@@a2rgaming863 what use do you get out of saying that
Day 4 of asking for an Up to Speed on how Donut Media came to be
Lol, good question!
Everything you need to know about donut media
Day 1 of supporting Nathan Joseph
I saw this comment on another video 👌
Day one supporting you
Jobe: Uses the jack to loosen the bolt that is behind the hub.
Me: “ohhhh... so I’ve just been an idiot with broken knuckles for the last several years.”
Right? Wish I would’ve thought of that before.
That’s what I was thinking… im over here using a huge metal rod to help get leverage.. when I could’ve just used the jack 🤦♂️
My motto is work smarter not harder
What did he use the jack to jack up on the ratchet?
One of the first tricks I learned In the army and soooo glad (lucky) that I did. I thought It was common knowledge. It was just because everything we work on is big.
I admire the fact he works on the floor. My 300lbs ass is used to a lift.
Zach Jobe: stance life. Also Zach Jobe: fist in the wheel well.
ruclips.net/video/xBmdmOzhxyc/видео.html
“Before we go jackin this puppy to the moon”
Me every night before bedtime.
69 likes...I cant like it
Underrated comment
Give this man the crown for best comment so far! Laughed my ass off with this one 😂😂
that's messed up to do that with your dog homie
ruclips.net/video/xBmdmOzhxyc/видео.html
Just want to say i've now binged the entirety of moneypit in a under a week, all by my self.. until this episode where my dad sat down a minute before Zach decided to show how caked up he is..
Here's a tip that might help. Measure the stock shocks at ride height and then measure your coil overs. Adjust your coilovers to be longer than the stock shocks
Zach didn’t have to be so THIQ this morning SHEEEEEEEEEEEEESH
baby boi can't help it tho
rockin those mom jeans rrrrrrreally hard.
Thic butt
🥵
I think he was enjoying it
"Turns out there's a lot of rocks in the desert" 🤣🤣🤣
ruclips.net/video/-ATx8E-AoBY/видео.html
The reason I love wednesdays. I get to watch Jesus work on cars.
Amen
Amen
Amen
Amen
Jesus caked up ngl 😳
I never thought I'd get back into cars ever since my failed project that just discouraged me after failing to complete it (sold it...) But after watching this channel I have realized a reborn attraction that has come to fruition. Thank you.
Zach is the best addition to Donut. Period. Honestly has motivated to wrench again
ruclips.net/video/xBmdmOzhxyc/видео.html
The moment of the day I was waiting for
Now if they would actually take this to a shop that knows what they are doing while adjusting the coils for rally. Zach just adjusted the length, but damping + preload would be nice to see.
Zach's modeling days may start after today
Zach being double caked up is something I would never have imagined to see ever on any Donut video
ruclips.net/video/xBmdmOzhxyc/видео.html
17:45 That's a hell yes from me too. I can't even remember how my stock suspension feels I've had mine on for so long now. She already cornered like a beast because its a 2 seater. Now I can pull a G easy tearing ass around turns even tight ones. And as a "bonus" theres one spot in the freeway close to me that I get the tiniest bit of air on when I go over it over 80. Yes our road around here are shit
Using the car jack to push the wrench when the bolt was rusted was genius level stuff. I have done my brakes so many times and end up using breaker bars and extenders and have never thought of that. Thanks for showing it!
Yoooooo Jobe do be having that dump truck though 🥵
"We're basically done here."
The 5 minutes left in the video say otherwise Bud
famous last words
Mission failed successfully
Key word basically
ruclips.net/video/-ATx8E-AoBY/видео.html
"We went from one finger in the back to 3 maybe 4" - Zach
"maybe 4 if you are trying"*
From "I'm not ready for a serious relationship" to "I think I'm ready to settle down"
ruclips.net/video/xBmdmOzhxyc/видео.html
gaped
This series can’t release episodes fast enough! I just can’t get enough of it. Zach Jobe needs a TV series for this. WE WANT MORE JOBE DAMMIT!!!
Watching your shows keeps me going with my build. Kudos to you guys!
Thanks for posting during my lunch brake, it’s been a long day.
Jobe: I need a haircut
Everyone: You sure?
Yeahhhhh... Keep dem luscious locks baby!
He looks so much better with long hair in my opinion
No kidding.
ruclips.net/video/-ATx8E-AoBY/видео.html
0:36 this is the first time I've ever heard someone say "large thanks"
Next episode: "Enormous gratitude towards"
I’m aware your still a young man but to save your hands you should put 1 bolt half way back in and then hit the inside of the tire with a rubber mallet if the wheel is stuck. More force and saves your palms. Apply a wire bush and nickel paste to the hub to make wheel removal easier in the future. Great channel and keep it up!
I love how camera man and host work together to make this! "Use the Force Zach"
Donut: We need more female viewers
Jobe: Say no more
ruclips.net/video/xBmdmOzhxyc/видео.html
@@vanbusto8870 🖕🏼🤡🖕🏼
I covered my eyes when I saw him showing up his badunkadunk, lol.
@Max funny of you to assume that I’m not a part of the lgbt audience and/or didn’t find that part of the video particularly… enjoyable.
@Max right back at you 🖤
you brighten my Wednesday ever week keep up the good work
Same!
Yessssss. I want to be a pro rally driver when I grow up.
you gotta have big bucks for it. like, really big bucks. My mothet had a friend in college who came from a really rich family and started rallying. until he got to pro level he maybe spent a couple hundred thousands of euros
Keep pushing man, don't care about money. Show them your talent, work hard for it and you will get noticed and sponsored
Group B for me even though I know everything that happened
Ive subscribed for when you make it
Good luck,hope you make it
"Don't judge me....yet" definitely should have been a Fit.
ruclips.net/video/xBmdmOzhxyc/видео.html
Man. Zach's the reason why I wanna dive into automotive madness.
Someone put together a compilation off all the times he has said "So" on this season and auto tune it to Toads Mall in Mario Kart
you mean coconut mall?
Seconding this. And throw in some of his other favorite conjunctions like “BUUUUT” for good measure.
ruclips.net/video/xBmdmOzhxyc/видео.html
"Still dont have it *sighs*"
I felt that
ruclips.net/video/xBmdmOzhxyc/видео.html
Is there going to be a weight reduction episode, like what chrisfix did with his 3 series
ruclips.net/video/xBmdmOzhxyc/видео.html
oooh that would benefit them
9:20 he says they’re gonna strip it
I once owned a 99 323is & a 93 325i. Wish this youtube channel exist back then. I would have def learned so much. I am a fan of Zach!
I can't get over how clean that car is. It's basically a unicorn for those of us in the salt belt.
Hey Jobe! Glad you guys installed rear reinforcement plates. Recommend you consider front plates also. The front shock towers “mushroomed” on one of my E36’s due to running coilovers with no plates. Garagistic makes a nice set. Just a recommendation! Keep up the great content!
Zach seems really happy and upbeat this episode, i think hes a ~little~ bit excited for this car
“We went from one finger into the back, to a solid three”
I wish so badly to be that car.
4 if you’re trying
ya'll are down bad
@@kaneki1056 can't blame them
@@kaneki1056 Ilyass?
I don't really know my way around a car and have no intention of ever doing anything more than change a light bulb or add wiper fluid. But I just love listening to Zach walk me through how to tear a car apart and then put it back together again.
Two things. 1) I had coil overs on my E36, and they quite frankly sucked. One day after working on it, I forgot to reconnect the front sway bay, and from then on it was amazing. Very neutral handling, but with on demand oversteer that was very smooth, predictable, and very easily controlled.
2) In the factory tool kit on the inside of the boot lid there should be an alluminium bar that's threaded on one end, and knurlled on the other. That's a wheel locator to make fitting and removing the wheel bolts easy. Just remove the upper most bolt, and replace it with the bar, then remove the others. The bar will hold the wheel in place till you want to remove it. Fitting the wheels is just the reverse, and with the wheels being hubcentric, all your bolt holes will automatically line up.
Can’t tell what I love more, Cars or Zach Jobe
ruclips.net/video/xBmdmOzhxyc/видео.html
2:05 "I know, I need a haircut"
you don't, really, you've got serious rockstar energy, and I am here for it
ruclips.net/video/-ATx8E-AoBY/видео.html
And I'm here rooting for it with every passing video.
"We went from one finger in the back to a solid three, four if you're tyin'" BRUUUUUHHHHHH
Jobe bout to make me act up when he said one finger in the rear three in the front.
That's a shocker
Hope everything is well with you guys. Cant wait for the next episode of Money Pit. I keep checking every wednesday for an update.
I like the way you explained everything. Detailed enough without getting bogged down. Great video.
"Jesus is my mechanic" really rocking that messiah vibe with that haircut!
ruclips.net/video/-ATx8E-AoBY/видео.html
4:26 AYO?😳
👉👈
Your name matches the clip perfectly
This guy's good value. I hope they're paying him well
ruclips.net/video/xBmdmOzhxyc/видео.html
"We are trying to be a little budget minded here" Yeah sure man lets have another look at this quote in a month from now xD
Money pit is the reason I keep watching Donut. Good work brother.
drinking game:
take a shot everytime Zach says "puppy"
ruclips.net/video/xBmdmOzhxyc/видео.html
How to get alcohol poisoning 101
ah yes a "Budget project car"
3 words that will never go together
Another I guess would be "short term project car"
@@winterwinter7505 or a "all come back to it eventually" car
ruclips.net/video/xBmdmOzhxyc/видео.html
🤣
removing the bolts using the jack was soo smart, would have never come up with that
I don't even have a car i just love watching money pit, it's like i'm also working on the car. I love you donut.
Damn, whoever did that money pit intro my hat is off to you.
Don’t cut the flowing mane, keep the lion alive.
Mullet time?
4:26 jobe had me dying 😂
Double cheeked up on a Wednesday morning.
whats up with the new episode, i thought it was new episodes every Wednesday where you at @zach ?? this is the best thing donut has imo and hi low
It's no coincidence that you guys have 5+ mil subscribers. You guys are doing the kind of stuff that we talk about when we're stoned with the homies. Obtainable cars and realistic mods.
I don't know much about cars and I don't know that I'll ever have a money pit of my own (too many hobbies as it is) but watching this series makes me want to get into it!
Im early and I'm ready for this new amazing episode and I'm excited to see more
Now it looks like any other Argentinian car! (due to the damaged road, most argentinian cars have raised suspension compared to the same car sold in another country)
I'm still waiting for the Miata to be on a track to see if all those mods were worth it before starting another project.
I thought they have done that?
Definition of “living my best life” Zach your a 👑👑👑
Forsure. Coilovers are always a good way to start off a build. Along side with good brakes. Both of which are often overlooked.
"Wheels just fall off"
Continues to kick them because he can't pull them off
I was just about to say, as a “Euro” myself, that tires falling off during mounting/dismounting is almost never the case - and especially not when you want it.
@@Snablarns Happens to all cars. 2 of my japanese cars had this problem. First was because of corrosion from washing the wheels. Second was a new used car I bought. I had a shop take it off for me first time since I needed to get a free rotation anyways. The second time it happened, I had to roll one of the wheels loosened lugs for a few times. Then I figured out once you have a little wiggle room, you can rock it back and forth and it comes loose easily
“Who’s Been A TRUE FAN FOR OVER A YEAR”.
Me
Me
Ive been watching them since like episode 20 or so of up to speed lol
Yel ya
Im in bitch
“Fit one finger in the rear” “fit 3 fingers in the front” “I’m going to use this big strong thing I have” “it feels firm yet subtle”
Mix these quotes with Zack hiking his pants up to heaven just gave this video some much needed sexual tension
Can’t forget “Six inches on the money!”
can't wait for the new series about jobe"s dumptruck.
Having spent the last two years dailying a fullsize pickup with 35" mud tires I have to say that I now want ground clearance and big tires on everything. Not necessarily full offroad setup. But it is soooo incredibly nice being able to hop a curb to get out of a crowded drive-thru or run over the shoulder to get off a stopped highway to the frontage road. I can't tell you how many times I did something in my pickup that saved me aggravation and that was only possible because I could get over some minor obstacle. Call it "urban offroading" or "auto parkour", whatever. I'm convinced that a serious street car should have a minimum of 8-10 inches of ground clearance and enough travel to climb curbs or handle rough rail crossing with ease.
If Zach Jobe cuts off those luscious locks I’ll riot