Changing and saving the meter settings in the instrument cluster of a new Toyota

Поделиться
HTML-код
  • Опубликовано: 27 июл 2024
  • Will your settings not save? Start from the basics and make sure you've gone through the process correctly. If that doesn't work, might be time to visit your dealer's service department.
    #toyota #grandhighlander #prius #toyotacrown #tundra #toyotahighlander #tacoma
  • Авто/МотоАвто/Мото

Комментарии • 18

  • @jonkrispeterson6678
    @jonkrispeterson6678 3 месяца назад +4

    Steve, mine will hold settings for 30-60 minutes. But when I turn off overnight, it goes away. GhHL. Specifically the one for tire pressure.

  • @frederickthompson8686
    @frederickthompson8686 5 дней назад +1

    Steve, I have a 2025 Camry SE. It seems to have a "one panel display." I'm guessing that this doesn't allow as much customization. 'd like to change the single dial to a tach, but that doesn't seem possible. Am I right? BTW, I love your vids. Very helpful Thanks for all your efforts.

    • @TrainerSteveClifford
      @TrainerSteveClifford  5 дней назад

      @@frederickthompson8686 I haven’t played with it enough and they are selling so fast right now that I can’t get into one to check. I’d guess no and being a hybrid, the tach isn’t really what people focus upon

  • @dominickichenside5862
    @dominickichenside5862 3 месяца назад +2

    I have a 2024 Tacoma and is set to the single round display then on the left I set the widget to Tire pressure. Then in the morning the tire pressure widget goes away and Audio appears. This happens most days

    • @TrainerSteveClifford
      @TrainerSteveClifford  3 месяца назад

      I’ve been hearing that the tire pressure will not stay. Not sure why

  • @johndeboyace7943
    @johndeboyace7943 3 месяца назад +1

    This happened to me yesterday, RAV4 hybrid limited 2024. As I was driving 2 out of the three panels, center and right changed. Didn’t touch anything, this is first time. Does the system update through the module in ceiling of the car?

  • @jjakkad
    @jjakkad 3 месяца назад +2

    Here is the experience on GH Hybrid, with the car new on 2nd day I set up the meters to exactly what i wanted.
    Then few weeks later I changed the right meter on the 3rd page from TPMS to AWD that did save. Now when i try to change that same spot back to TPMS it will not stick, always reverts back to AWD after some hours later.
    Turning it ON or OFF & checking is not good enough of a test imo, there are definitely bugs.

    • @TrainerSteveClifford
      @TrainerSteveClifford  3 месяца назад

      Thanks for the feedback. That’s one I can’t diagnose with the cars in inventory unfortunately

    • @dtbrad1
      @dtbrad1 3 месяца назад +1

      @@TrainerSteveClifford
      Same problem on 2024 Crown xle. Tire pressure will not stick. Reverts back to Music setting on next start up after setting up desired view. Maddening.

    • @johndean4468
      @johndean4468 3 месяца назад +1

      Steve, maybe that the Tire Pressure sensor is not constant is why it not staying. What I noticed after adding air and checking the display it just periodically checks the TPMS. Especially when checking via the app, it seems to be once or twice a day. The app actually show under the Status tab the last Tire Status Update with date & time under the picture of the vehicle. So maybe the controller periodically ping the TPM sensor and that’s why it doesn’t stay consistent on the dashboard display, so goes to the next sensor/widget to show up on the dashboard. Or something along those lines.

    • @johndean4468
      @johndean4468 3 месяца назад

      Steve, forgot to mention I have a GH Max.

    • @johndean4468
      @johndean4468 3 месяца назад +1

      @@TrainerSteveClifford Steve, maybe that the Tire Pressure sensor is not constant is why it not staying. What I noticed after adding air to my GH Max Limited and checking the display it just periodically checks the TPMS. Especially when checking via the app, it seems to be once or twice a day. The app actually show under the Status tab the last Tire Status Update with date & time under the picture of the vehicle. So maybe the controller periodically ping the TPM sensor and that’s why it doesn’t stay consistent on the dashboard display, so goes to the next sensor/widget to show up on the dashboard. Or something along those lines. I

  • @springdingo
    @springdingo 2 месяца назад

    I've played with the settings in a UK Yaris and it has always returned to the same setting as it was when turned off. I only wish that I could mix single and dual styles across the 3 views.

  • @ormondson1
    @ormondson1 9 дней назад

    Steve , I too, using the standard 3 dial screen, have had issues of the pressure gauge screen disappearing after setting it on a one of the dials. It occurs with in a day of setting, with it switching to another screen, usually tripmeter B. I’m wondering if there are other owners of 24 Grand Highlanders that have experienced that or if there is a fix for it?

    • @TrainerSteveClifford
      @TrainerSteveClifford  9 дней назад

      @@ormondson1 no fix and it is a known thing. The map screen also doesn’t “stick” for some reason

  • @johnpaul7123
    @johnpaul7123 3 месяца назад

    I recall something about customizing memory settings to key fob. Does this feature set to the fob? Can wife have different display preferences?

  • @dgeigerr
    @dgeigerr 3 месяца назад

    I have a 23' Tundra... How do I keep my defrosters on after the truck turns off ... For auto start the next morning. The Front and rear defrosters revert to off when the truck turns off