These videos are life saviour, this Cisco semester I'm having a very bad teacher whose class is impossible for me to follow and he doesn't answer to questions so this material is really helping me.
Seriously Pedro, sounds like your teacher shouldn't be teaching if he/she can't answer your questions. Worse yet, are you paying for these classes? If you are, I would request a refund. RUclips is literally full of free instruction by people who actually love to teach, like Tech Acad. With a book and channels like this you should be able to pass.
I've watched multiple videos doing this while doing it myself. This is the ONLY video that I actually used and git it to work. Sending multiple packets in different directions from different pcs aat the same time in simulation mode and all were successful. Thanks a Million Bro!!
00:02 Configuring Router on a Stick Inter-VLAN Routing 05:28 Configuring VLANs and IP addresses for inter-VLAN routing. 08:58 Configuring VLANs and assigning ports to VLANs in Cisco networking 12:26 Configuring VLANs and assigning ports in CISCO networking 15:57 Configuring inter-VLAN routing and verifying VLAN configurations. 19:14 Configuring trunk ports for inter-VLAN routing 22:26 Inter-VLAN routing setup on Router R1 25:30 Configuring inter-VLAN routing on Router on a Stick 28:46 Configuring Router on a Stick for Inter-VLAN Routing
thank you for this guided exercise. it really helps in making me better understand the mechanics behind each protocol which is necessary when I will be designing my own simulated networks to test my own knowledge on the topics
You are a Fucking genius... I've watched loads of these videos now and I am crying with laughter each time. Keep doing what you're doing I haven't laughed this much since I was in high school. Just totally hilarious keep them coming
Glad it helped. And we will upload more videos in future. And thank you so much for your great support and sharing my dear friend...!!! If you wish to get any support, you can contact our team using our website.
Hey, thanks for this kind of content! Really apreciated! I have one question. What could I do to make the computers to stop communicating between them on the same switch and different VLans but keep everything else the same? It's ACL a good starting point?
@@TechAcad Nice, it's working. Thanks for the answer! I made it working by blocking communication between hosts one by one. Is there a way to make the VLAN1 deny packages from the VLAN2 without having to block the communication between hosts one by one as I did?
Thank you for the clear explanation. I have a questions like if we make 4 sites similar to this one how we can make them communicate. by connecting them with routers or with switches. if through routers then how. Can you little explain.
Hi Press ctrl button and then select the device you needed. So that we can add multiple number of devices. Thanks for your great support and sharing my dear Friend...
Thank you for that clear explaination... but I have question can we do the same but with 3 switches instead of 4 and if yes can you tell me please what should I link together...which switch should be linked to the router and the links between the switches which switches need to be connected together... Would that work if we removed S4 and move the 3 PCs to S2 and how exactly
Hallo,Thanks a lot for a wonderful video...really it helped me a lot i was trying to understand VLAN correctly more than 5 days coz preparing for my ccna test.....i shall be very thankful to you if you can just explain a bit what Trunk is?and another question instead of using S1,S2,S3,S4 can we just use S4?Thanks a lot once again
It is just a start topology to explain inter-VLAN routing Concept, not hierarchical Topology. Even we will have a hierarchical topology with these concepts later. Thanks for your great support!
I know this video is old, but how would one connect 2 of these exact networks (left network is class A IP, right is class C IP) with 2 extra routers doing the connecting between these 2 networks (left router being RIP, the right being Static)?
Hello, your video was really helpful but my project required distribution switches and I selected 3560 but the communication stopped, I also add it one server and it doesn't communicate with the rest of the network, any ideas why??
How to connect two Networks design having this type of topology. If we assume two this type of same network and we need to connect it (2 router connection)
Can u help me please? I have just one small error in S2 at Gig0/1 it shows 1,10,20,30 and I saw on your video that it has to be none. What step did i missed?
Sir in this design we can put server right sir sir ao we connect the server to switch in that server switch connect to the main switch sir so sir how to configure the dhcp and dns
@@TechAcad The topic of my thesis is ipv6 based inter campus network design. In ipv6 vlan is okk but Inter vlan is not working. Please help me with suggestions or make a video like ipv4.
These videos are life saviour, this Cisco semester I'm having a very bad teacher whose class is impossible for me to follow and he doesn't answer to questions so this material is really helping me.
Glad you like it!
Could you explain how to configure management native vlan?
@@pete-i7p Native VLAN is the default VLAN that comes with the switch. You do not need to configure it.
Seriously Pedro, sounds like your teacher shouldn't be teaching if he/she can't answer your questions. Worse yet, are you paying for these classes? If you are, I would request a refund. RUclips is literally full of free instruction by people who actually love to teach, like Tech Acad. With a book and channels like this you should be able to pass.
hi what were you majoring and what level
I've watched multiple videos doing this while doing it myself. This is the ONLY video that I actually used and git it to work. Sending multiple packets in different directions from different pcs aat the same time in simulation mode and all were successful. Thanks a Million Bro!!
This tutorial has been really helpful in understanding VLAN, Inter-VLAN routing and router on a stick concept and configuration
Glad it helped!
Thanks a lot for clearing many doubts not only in Router-on-a-stick, but also in basic switching in just 30 mins video.
Glad to hear that
I come to the right place at a right time ,my teacher was not good i’m glad to have this information thanks for helping me .
Glad this video helped you out!
I fell in love with ur teaching...wow
Glad to hear that...!
And thanks for your great support and sharing my dear friend...!!!
sussy
thank u so much, i spent all night doing this and I finally found this video
00:02 Configuring Router on a Stick Inter-VLAN Routing
05:28 Configuring VLANs and IP addresses for inter-VLAN routing.
08:58 Configuring VLANs and assigning ports to VLANs in Cisco networking
12:26 Configuring VLANs and assigning ports in CISCO networking
15:57 Configuring inter-VLAN routing and verifying VLAN configurations.
19:14 Configuring trunk ports for inter-VLAN routing
22:26 Inter-VLAN routing setup on Router R1
25:30 Configuring inter-VLAN routing on Router on a Stick
28:46 Configuring Router on a Stick for Inter-VLAN Routing
Thank you, brother! I followed the tutorial and managed the configuration like yours! great tutorial in 30 mins...
Glad it helped
thank you for this guided exercise. it really helps in making me better understand the mechanics behind each protocol which is necessary when I will be designing my own simulated networks to test my own knowledge on the topics
Glad it was helpful!
Thanks.There's so much in a single video.🖤
Glad it helped!
Thank you Sir, it helped me a lot, Sir gave me the presentation about vlan, tomorrow, I will explain it! Accoriding to your point!
You sir, are a life saver .
Thank you so much my dear Friend for your great support...
Thank you, I speak spanish and I understood all perfectly, great video (sorry for my bad english)
Glad I could help!
excellent work, a warm thankyu from australia. wish you all the best
Thank you! Cheers!
Very clear explanation thank you so much bro🥀❣
So nice of you
Thank you so much for this video, it really helped me to understand about VLANs. Keep up with the good work!
Glad it was helpful!
This helped me for my assignment, thank you so much
Glad it helped!
I like your way of step by step configuration of L3 switch
GOD in heaven bless you sir for this teaching
Glad it helped.
And thank you so much for your great support and sharing our channel with all your friends...!!!
Thank you sir, Its very helpful for leaning cisco switching networking.
You are most welcome
And thanks for your great support and sharing with your friends...!!!
An absolute legend! Thank you! :)
Glad it helped!
This helped me so much with understanding it and troubleshooting! Thanksss!
Thank you dear Friend for your great support.....
I'm from Nepal. The way of presentation is very nice sir. I completely understood the whole concept of inter -vlan routing. Thanks a lot sir !
Thanks and welcome
thank you! i spend a lot of time to find some normal video with my topology
=D
Glad I could help!
THANK YOU SO MUCH,VERY GOOD VIDEO. THANKS AGAIN AND GOD BLESS, MIKE
Glad you enjoyed it!
And Thank you so much my dear Friend for your great support...
Thank you for the steps you used to verify connectivity!
Thank you so much my dear Friend for your great support...
Thank you for this informative video. You just saved a life❣️
Glad it helped!
This video saved my ass, thank you so much Tech Acad.
thats so sussy
thank you so much! I've learned a lot from your videos this is very helpful.
Glad it was helpful!
Thanks for the explaniaton! it's more than good.
Glad it was helpful!
Thanks a lot brother you saved my study!!
Glad to hear that
Great video. Clear explanation. Thank you very much.
THANK YOU SOOOOO MUCH this was very helpful
You are a Fucking genius... I've watched loads of these videos now and I am crying with laughter each time. Keep doing what you're doing I haven't laughed this much since I was in high school. Just totally hilarious keep them coming
THANK YOU SO MUCH.
COULD YOU EXPLAIN ME WHAT ARE THE PURPOSE OF VLANS PLEASE?
Is it possible to assign ip addresses to end devices (pcs) through dhcp service in Router?
14:20 can we have different ports assigned for respective vlan's ? Ie) instead of fa0/1 ->fa0/8 ?
We can decide to any port depends on our requirements!
Thank you very much for this great lesson, you're the best. I need a video about call manager VoIP if possible. Thanks and all the best to you
Glad it helped. And we will upload more videos in future.
And thank you so much for your great support and sharing my dear friend...!!!
If you wish to get any support, you can contact our team using our website.
You are the best!!! Many thanks from me!
You are!
Great lesson learnt sir, can we do a inter vlan routing on a layer 3 switch?
Yes we can
Hey, thanks for this kind of content! Really apreciated!
I have one question.
What could I do to make the computers to stop communicating between them on the same switch and different VLans but keep everything else the same? It's ACL a good starting point?
Glad you like them!
And yes, it is possible to create and apply ACL to the needed VLAN.
@@TechAcad Nice, it's working. Thanks for the answer!
I made it working by blocking communication between hosts one by one. Is there a way to make the VLAN1 deny packages from the VLAN2 without having to block the communication between hosts one by one as I did?
@@fabio11386 did u figured it out? how did u do it? proxyarp?
wish to see it connected to the internet. Thank you Tech Acad
Thank you for the clear explanation.
I have a questions like if we make 4 sites similar to this one how we can make them communicate. by connecting them with routers or with switches. if through routers then how. Can you little explain.
Hey Tech Acad, thank your for this great video. How do you place multiple devices with just one click?
Hi
Press ctrl button and then select the device you needed. So that we can add multiple number of devices.
Thanks for your great support and sharing my dear Friend...
Muchas gracias amigo. Que Dios te bendiga . Thank you very much friend. God bless you.
Thank you so much my dear Friend for your great support...
I followed to the very end of the video step by step and some of my simple PDUs are not working. Any guesses where I could have gone wrong?
Best video ever. ❤️❤️❤️
thank you very much, some details were very useful for me
Glad it was helpful!
Really valuable information
Glad you liked it
Excellent work
Many thanks
Thank you for that clear explaination... but I have question can we do the same but with 3 switches instead of 4 and if yes can you tell me please what should I link together...which switch should be linked to the router and the links between the switches which switches need to be connected together... Would that work if we removed S4 and move the 3 PCs to S2 and how exactly
We can design and implement it in different ways!
You can contact us if any doubt!
I love your videos, thank you
you saved me my friend! Thank You
Glad to hear that!
Great! explaination.thanks so much
Glad it was helpful!
And thanks for your great support and sharing my dear friend...!!
Great tuto bhai love it
Glad it helped!
What is the role of encapsulation and dot1q
We specify the VLAN Identifier.
Why are we creating the Same Vlan on the switch 2..?
For the Inter VLAN, we need to create all the VLANs on all the switches!
Thank you sooooooo much❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️😘
You are so welcome!
if it said subinterface for trunk overlaps with gigabitEthernet g0/0, then what we should replace it with?
You must use different subnet for each interface or sub interface in the same router!
Thanks for your great support!
Thank you! bro, you're the best!
Glad it helped
Tq so much for your video sir
So nice of you
23:18 routing begins
why not 3 VLAN with only 1 IP class C and subnet mask 255.255.255.192?
Great video!
Thank you
Hallo,Thanks a lot for a wonderful video...really it helped me a lot i was trying to understand VLAN correctly more than 5 days coz preparing for my ccna test.....i shall be very thankful to you if you can just explain a bit what Trunk is?and another question instead of using S1,S2,S3,S4 can we just use S4?Thanks a lot once again
Glad to hear that!
If any doubt, you can contact our team.
Is this a hierarchical or extended star network topology ?
It is just a start topology to explain inter-VLAN routing Concept, not hierarchical Topology.
Even we will have a hierarchical topology with these concepts later.
Thanks for your great support!
Thank you brother for the video. One question, is it possible to allow multiple vlans from a single interface on a swtich?
No, We cannot assign multiple VLANs to single interface. We can allow multiple VLAN using TRUNK in a single Interface.
Hello... If i want to do this configuration with ipv6, what is the process ?
Very good video
Thanks
Can you share the .pkt file?
I know this video is old, but how would one connect 2 of these exact networks (left network is class A IP, right is class C IP) with 2 extra routers doing the connecting between these 2 networks (left router being RIP, the right being Static)?
You can contact us for any assistance!
how to enable stp on this
if a printer and a server are connected to a different subnet how can the other vlans connect to them?
We can configure Inter-VLAN for each different network.
@@TechAcad do you have a video to watch on youtube. Right now we have a university assignment and cannot figure out how this is done.
wow sir good lecture
Thanks for liking
And thanks for your great support and sharing my dear friend!
Thanks for the great content!
Hello, your video was really helpful but my project required distribution switches and I selected 3560 but the communication stopped, I also add it one server and it doesn't communicate with the rest of the network, any ideas why??
great video
Glad you enjoyed it
You save my day Sir.
Glad it helped!
Thank you so much sir raymond kahit anong palit mo ng file name mahahanap namin yan
why is that from switch to switch is fe0/0 to g0/0 ?
Its only due to lab. Otherwise there will be uplink to connect this!
@@TechAcad tnx by way, do you have a tutorial also for GNS3?
How we gave this ip addresses anyone know? I have ip Block to subnet but I could not figured out how to subnet it through the vlans
Great vid, ty
Thank you so much my dear Friend......
How to connect two Networks design having this type of topology.
If we assume two this type of same network and we need to connect it (2 router connection)
Yes, we can! You can contact our team for any assistance!
Can u help me please? I have just one small error in S2 at Gig0/1 it shows 1,10,20,30 and I saw on your video that it has to be none. What step did i missed?
I think you must give the "switchport trunk allowed vlan" should be configured!
Tq nice explaination
So nice of you
How to install these Software with necessary Libraries
We already have video related to packet tracer installation!
Sir in this design we can put server right sir sir ao we connect the server to switch in that server switch connect to the main switch sir so sir how to configure the dhcp and dns
Yes you are right. ..
And we have that video in our channel.
Thank you so much my dear Friend for your great support and sharing...
Poland and भारत brother!
you saved me from my exam but I'm still not going to give you your like
Estudia sonso. ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ
Keep it up...
Thank you, I will
How is is possible...u r using straight through cable for switch to switch and switch to pc
HTherei
is a concept called MDIX where u can use either crossover or straight-through
And thanks for your great support my dear Friend...
@@TechAcad ok.... Thank you ☺️
Thank you sir!
Thank you dear Friend
Thanks a lot, Very Helpful
Glad it helped!
To the point!!!!!! thank you sir.
Glad it helped
Good job, thank you so much.
Glad it was helpful!
Thank u for clear confusion
thx for all
Glad it helped!
please make a video of ipv6 vlan and inter vlan routing
Sure, we will!
Thanks for your great support and sharing my dear friend...!
@@TechAcad The topic of my thesis is ipv6 based inter campus network design. In ipv6 vlan is okk but Inter vlan is not working. Please help me with suggestions or make a video like ipv4.
please I need the configuration