If there was one more thing to make it complete, it would be that VLAN 10, VLAN 20, and VLAN 30 should not see each other but still have internet access. If I could ask for this addition, I would be very happy. I have been studying at Cisco Net Acad for 3 months, and you have helped me a lot. Thank you!
In my case i created also vlan 40,50,60. I enable ip routing on the switch and define a native vlan dot1q 1 on the router to separate vlan traffic from the Data vlan. I also connected a Wifi router to one interface to the switch, i had to configure Static routes from wifi router network to all different vlan networks with their respective gateways in order to be able to access across all networks. At the end i was able to ping all across the networks
"Thank you so much for sharing your expertise and creating these incredibly detailed and informative videos! Your step-by-step guides on Cisco routers and switches configuration have been instrumental in helping me start my career in networking. Your clear explanations, concise commands, and real-world examples have made complex concepts seem approachable and easy to understand. I've learned so much from you and I'm grateful for the time and effort you put into creating this content. Keep doing what you're doing, you're making a real difference in people's lives and careers! Thank you again!"
Wow. This is fantastic training and the most straightforward RUclips video out there. It provides easy-to-understand, step-by-step instructions on connecting a Cisco router and switch. I was watching another RUclips channel, but I still could not understand. This will be my top RUclips channel to go to whenever I need some explanations on Cisco switches and routers. Thank you so much.
You and your video have helped me tremendously! Strength -- brilliant step-by-step with clear images. Issue - I have a CISCO 4300 Series connected to a 2960X Switch with 24 Ethernet access physical ports. References to port 48 were confusing... UNTIL, I realized that I could dedicate Port 24 as a trunk. Smooth sailing from here. Thank you so much. ~ B. Carter
Thank you so much for making all this video, if u have some time. i would like to know what is spanning tree all about, kindly make one to let us understand...have a great day
Like and subscribe and Share, finally some real networking shit , not like the videos showing packetTracer topolgies or just speaking and not showing anything Bravo !
You should explain in more detail... for example the OVERLOAD part.... what is it exactly, what is the syntax of that command, etc....... And how could you configure that the VLANs do not see each other?
Sir please upload video sophos / fortinet firewall with Cisco switch configuration Because in the market firewall very poluler compair to Cisco routers
Even though you have a firewall you will still need a router. Some routers come with firewall/ vpn build-in. My recommendation is that you learn on configuring both Cisco Router, Cisco Switch and add Sophos or any firewall of your choice.
can you help me? I followed your video on how to connect Cisco lab to home internet. I have a 2960 router and a 3750 switch. Everything worked but when i connect with my PC at the end It connects but doesnt give me internet. I have my windows firewall turned off. What should I check?
This Ai voice is welcomed, because in the past videos people complained about not understanding his indian accent. So i think the channel made the correct choice with Ai narrator to solve this accent issue
dear sir g mai chata hon k vlans 10,20,30 in k pcs par internet work Kare but yeh 3 vlan ek dusra sa communication na Kare is topic par b video bano aur network scenario same ho ap na is topic ko pehla b cover Kia hai kyun k is thra ki video missed hai
If there was one more thing to make it complete, it would be that VLAN 10, VLAN 20, and VLAN 30 should not see each other but still have internet access. If I could ask for this addition, I would be very happy. I have been studying at Cisco Net Acad for 3 months, and you have helped me a lot. Thank you!
In my case i created also vlan 40,50,60. I enable ip routing on the switch and define a native vlan dot1q 1 on the router to separate vlan traffic from the Data vlan. I also connected a Wifi router to one interface to the switch, i had to configure Static routes from wifi router network to all different vlan networks with their respective gateways in order to be able to access across all networks. At the end i was able to ping all across the networks
exellent , you are far better than my college professor, thank you
"Thank you so much for sharing your expertise and creating these incredibly detailed and informative videos! Your step-by-step guides on Cisco routers and switches configuration have been instrumental in helping me start my career in networking. Your clear explanations, concise commands, and real-world examples have made complex concepts seem approachable and easy to understand. I've learned so much from you and I'm grateful for the time and effort you put into creating this content. Keep doing what you're doing, you're making a real difference in people's lives and careers! Thank you again!"
AI comment lol
100 times better than my 2 week school program.thank you
Very straight forward and to the point.
Wow. This is fantastic training and the most straightforward RUclips video out there. It provides easy-to-understand, step-by-step instructions on connecting a Cisco router and switch. I was watching another RUclips channel, but I still could not understand. This will be my top RUclips channel to go to whenever I need some explanations on Cisco switches and routers. Thank you so much.
You and your video have helped me tremendously! Strength -- brilliant step-by-step with clear images. Issue - I have a CISCO 4300 Series connected to a 2960X Switch with 24 Ethernet access physical ports. References to port 48 were confusing... UNTIL, I realized that I could dedicate Port 24 as a trunk. Smooth sailing from here. Thank you so much. ~ B. Carter
Listen, keep dropping like this you might have the #1 tech channel. I definitely subbed 💪🏾
Thanks for the sub!
this is it, literally the video i have been looking for
Very detailed, very informative ! so much thank for your kindness .
This is what I need to watch. Thank you❤
Thank you very much for sharing this short and precise video
Thank you so much for this great video...that's just what I was struggling with today...a million likes!!
Great presentation massage and information keep it up go ahead well done ❤❤❤❤
Thank you so much for making all this video, if u have some time. i would like to know what is spanning tree all about, kindly make one to let us understand...have a great day
Like and subscribe and Share, finally some real networking shit , not like the videos showing packetTracer topolgies or just speaking and not showing anything Bravo !
I found this very useful. Thanks
wooh this is what i was looking for.. Subscribed
Very detailed and informative.👍
Glad you liked it
amazing tutorial, keep moving forward bruh
Thank u Teacher, bought 2nd hand switch and router following your step...result succeed.
wish all instructors no one will face difficult, it would be better if you create more contents
Thanks. Great tutorial 👏
well explained! Great!
Thank you, Thank you, Thank you !
Thank you for this video it's good and you give many details
Amazing explanation.. Thank you so much Sir
fantastic & nice explanation .
Thank you very much for sharing this video
hello with this diagram you face double nat right ? or you put isp router on bridge mode ?
Muchas gracias por compartir y traducido al español. Me suscribo a su canal
Good practices, thanks...
Very good video bro keep rocking and upload this type of real scaniro work video good 👍💯
Amazing explanation 🙂
Thank you!
You should explain in more detail... for example the OVERLOAD part.... what is it exactly, what is the syntax of that command, etc....... And how could you configure that the VLANs do not see each other?
Very good sir❤
Nice ...............
This kind of scenario where we can apply ? because client connect switch any port it will assign ip address dhcp.
thanks for video, i have question, on this router, i do not want to creat sub interface on F0/1 -> how to config, thanks
Thank you 🙏
Sir please upload video sophos / fortinet firewall with Cisco switch configuration
Because in the market firewall very poluler compair to Cisco routers
Ok I will try
Even though you have a firewall you will still need a router. Some routers come with firewall/ vpn build-in. My recommendation is that you learn on configuring both Cisco Router, Cisco Switch and add Sophos or any firewall of your choice.
🎉Very good
The human voice was better than the AI voice honestly. Don't worry about having an accent.
. bano ga na is same network scenario ko use kar k ACL configure karan par video k 3 vlans ek duras k sath communication na Kare dear sir g ?
GREAT!
Jio guruji,Ram Ram
Very nice video
Thanks bro 🙏
this is great
what if you have a server that is running active directory and dhcp how would you add that to this network?
Very good
very nice video
can you help me? I followed your video on how to connect Cisco lab to home internet. I have a 2960 router and a 3750 switch. Everything worked but when i connect with my PC at the end It connects but doesnt give me internet. I have my windows firewall turned off. What should I check?
Is there any Ccna course yours
I prefered your own explanation during the video.The new one is an AI I guess which is really fake.
yg penting informasinya dapet, siapa yang ngisi suara gak terlalu penting
This Ai voice is welcomed, because in the past videos people complained about not understanding his indian accent. So i think the channel made the correct choice with Ai narrator to solve this accent issue
Thanks
❤❤❤
Hello! How to configure the bandwidth for each IP so that the entire GE port bandwidth is not consumed
Thanks
Thanks bro
very informative
Glad you liked it
dear sir g mai chata hon k vlans 10,20,30 in k pcs par internet work Kare but yeh 3 vlan ek dusra sa communication na Kare is topic par b video bano aur network scenario same ho ap na is topic ko pehla b cover Kia hai kyun k is thra ki video missed hai
You don't need a static route for an interface that is getting its IP via DNCP.
Good
brother what is ip nat inside/outside
to tell the router which port is WAN and which port is LAN, also to allow Internet access from LAN
How to change command switch: to switch> or switch#
You can avoid doing a router on a stick and install a third WIC g0/2/0 to better aid in security, QoS, and crosstalk.
Lekin jinko double glass ka shesha patla hota hy single glass ki nisbat
Crips. easy and perfectly done
Thank you!
Very nice