Great video!!! I have noticed that not many people show how to configure the router or the Layer 3 Switch to be a DHCP Server. The only thing that video lacked was showing how to make the L3 Switch to also be the DHC Server of the network
@@theFilipinofoodie Vlan99 is for management of the switch itself, it doesn't have to be 99 it can be any Vlan number, but you should give an ip address to it. Native Vlan will be untagged on trunk port, so that devices can use it.
Question is why enabled int vlan 10,20,30 on all the access switches? It could be just vlan 10,20,30 and assigned edge devices but why int vlan 10,20,30 on access switches when we don't assign then ips,????? Any reasons for it? Int vlan 10,20,30 should be defined on layer3 switch but why on access?????
thank you for this. The CCNA volumes from cisco press do a bad job on this topic. I know this does not directly relate to the video, but I can't use the web browser in the simulation or ping the routers from the PCs. How would you set the PCS and routers up to get to the internet using a web browser?
i have question, is it really necessary to enable interface vlan on the access switch that is not in use? Here the management is VLAN 99 and it should be the only activated interface vlan on the remote switches.
Is it necessary to create additional "interface vlan (10, 20 or 30)" on each L2 switch? Couldn't recall this from CCNA course. And how did you set up trunk port on MLS switch, there was no configuration, but nevertheless it shows that port is operating in trunk mode, was it done automatically after creating vlan interfaces?
Actually there is no need to do that on Layer 2 switches (accept for Vlan for managing the switch itself, in this video he made it interface Vlan99). SVIs are created on Layer 3 switch for inter Vlan routing
Hey thanks for the videos its pretty much helping, i have a probleme. I have this network lan1(with different vlan) => switch => router => router => switch => lan2, i configure an ospf routage on routers but the ping does not work between the same vlan on different lan Can someone help??
You did a great job explaining this procedure. Something I have been trying to figure out for a year or so. Thank You!
Great video!!!
I have noticed that not many people show how to configure the router or the Layer 3 Switch to be a DHCP Server.
The only thing that video lacked was showing how to make the L3 Switch to also be the DHC Server of the network
Thank Salah. Not only video is great but supporting documents are very good. Fluency is showing your expertise.
Kashif Mohsin Thank you Kashif.
Great sir -- Very well explained -- Additionally attached the configuration file and packet tracer file .pkt -- Thank you -- Liked and Subscribed !
very well explained. Great video!🙏👏🤜
Please explain what is the use of Vlan 99 and why did you configure native vlan to 50?
@@theFilipinofoodie Vlan99 is for management of the switch itself, it doesn't have to be 99 it can be any Vlan number, but you should give an ip address to it. Native Vlan will be untagged on trunk port, so that devices can use it.
Does it is used to hit telnet ssh too???
im confused on the vlan 50. why did it become the trunk vlan intead of vlan 99?
Can you show us how to configure the actual layer3 switch.
Question is why enabled int vlan 10,20,30 on all the access switches? It could be just vlan 10,20,30 and assigned edge devices but why int vlan 10,20,30 on access switches when we don't assign then ips,????? Any reasons for it? Int vlan 10,20,30 should be defined on layer3 switch but why on access?????
thank you for this. The CCNA volumes from cisco press do a bad job on this topic. I know this does not directly relate to the video, but I can't use the web browser in the simulation or ping the routers from the PCs. How would you set the PCS and routers up to get to the internet using a web browser?
same
Where are the links for the two source files?
i have question, is it really necessary to enable interface vlan on the access switch that is not in use? Here the management is VLAN 99 and it should be the only activated interface vlan on the remote switches.
hi can you help me with a problem with my labo about packet tracer ?
How do I configure uno switch 3650 between 2 routers 2811.
Why use 3 switches? I mean why cant just connect the two switches directly to the L3 switch? Please give reason why?
Thanks for the great work
Thank you sir. Helped alot!
Is it necessary to create additional "interface vlan (10, 20 or 30)" on each L2 switch? Couldn't recall this from CCNA course. And how did you set up trunk port on MLS switch, there was no configuration, but nevertheless it shows that port is operating in trunk mode, was it done automatically after creating vlan interfaces?
Actually there is no need to do that on Layer 2 switches (accept for Vlan for managing the switch itself, in this video he made it interface Vlan99). SVIs are created on Layer 3 switch for inter Vlan routing
hi mr Saleh
how to vlan 10,20, 30 pc can ping to vlan99 use for telnet purpose
Hola como debería hacer para configurar el router de Internet1, por ssh con la vlan 99, porque esta en otro segmento, la vlan99 172. 16.99.254
No ping success from switches to cloud g0/0?
Configure a default route on the MLS or a dynamic routing protocol.
@@MrSaleh970 i'm a beginner...can you tell me how?
Thanks. Much appreciated
Excellent ... well done...
I can't ping from a pc to MSL G0/2??
I will do the lab and explain it thoroughly so soon, thank you for your feedback .
@@MrSaleh970 it's fine! I just forgot to give the pc's a default gateway 😬 thank you for responding!!
Marie Verlinden glad to hear, best of luck.
nice sharing
Great video, keep up
thank you so much, good video
good video ! Thanks.
great work
Hey thanks for the videos its pretty much helping, i have a probleme. I have this network lan1(with different vlan) => switch => router => router => switch => lan2, i configure an ospf routage on routers but the ping does not work between the same vlan on different lan
Can someone help??
I like this video, how can I see more videos on your channel?
My channel is Saleh Al-Moghrabi, there are more videos there,
@@MrSaleh970 thank you
صراحة فيديو جميل و اذا ممكن أستاذي أتواصل معك معي مشكلة ف النتوورك اللي سويتها و اذا ممكن تساعدني ف أكون شاكراً لك
Très bn cours
well Thank you for posting it but i wish you slow down and explain what you'r doing not detailed steps
Articulate demonstration.