How to Configure Multilayer Switch or Layer 3 Switch as DHCP Server with Inter VLAN Routing

[@gurutechnetworks]

PREVIOUS PROJECTS
8. Business Company/Corporate Network: ruclips.net/video/eqEd84yeRxg/видео.html
7. Bank System Network Part 3: ruclips.net/video/NLMqmaBvD8Q/видео.html
6. Bank System Network Part 2: ruclips.net/video/rtWYsyT7_1c/видео.html
5. Bank System Network Part 1: ruclips.net/video/T8F5F9Jt8Yk/видео.html
4. Campus Network: ruclips.net/video/qIbhkmTB8Q8/видео.html
3. Hotel System Network: ruclips.net/video/RwFJTJTe-OM/видео.html
2. SOHO Network: ruclips.net/video/F_dSpaTMyuA/видео.html
1. Simple Networking Project: ruclips.net/video/T8F5F9Jt8Yk/видео.html

[@Nessyou7]

Huge thanks dude, you just saved my network project with my school !

[@gurutechnetworks]

Thanks for your feedback

[@afiqshahriar9110]

When I'm giving AC power supply to the multilayer switch, all ports are not turning green. What I can do?

[@gurutechnetworks]

This is a packet tracer and we have to plug in the power supply.

[@afiqshahriar9110]

@gurutechnetworks Yes, I've plugged in as you shown in your video. It's not working 😔
Some ports are turning green, some are not.

[@marsango6624]

And if i have a extern router connected to the multilayer switch in trunk mode?

[@gurutechnetworks]

What's the point?

[@sweetdukes7031]

When I am attempting to trunk the L3 switch it tells me, " An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode."

[@gurutechnetworks]

Choose 3650 l3sw not 3550 l3sw--or--just include this command to pass that error, switchport trunk encapsulation dot1q

[@norfauzannaim4878]

Just do switchport trunk encapsulation dot1q instead of switchport mode trunk.

[@joejoe2452]

How can you stop inter vlan routing on layer 3 switch like if there is a vlan with a server in vlan 10 . How can allow all vlan like 20 and 30 to access vlan 10 but not allow vlan 20 and vlan 30 to talk to each other?

[@gurutechnetworks]

We can implement ACL to allow/deny to/fro communication

[@joejoe2452]

@@gurutechnetworks so would need a firewall? Wouldn’t that slow down traffic? Should i just use a layer 2 switch and let the router do the intervlan routing?

[@gurutechnetworks]

@@joejoe2452 not actually, we can use the l3sw or the router

[@joejoe2452]

@@gurutechnetworks do you have video on layer 3 switch ACL for inter vlan routing?

[@onyxia8097]

Thanks a lot for this video from France !

[@gurutechnetworks]

Thanks for the positive feedback

[@wilpi2456]

are these then technically different subnets?

[@gurutechnetworks]

Correct

[@Christophernyean]

mine is DHCP failed. Apipa is being used. How can i fix this?

[@gurutechnetworks]

Kindly follow the video again keenly for full understanding

[@Christophernyean]

@@gurutechnetworks my bad. i’m just really frustrated of all my school works but thank you for the solution😅

[@100waysofexcersies3]

Why you made center switch for both vlan like 10 & 20, what's the logic behind this.

[@gurutechnetworks]

Intervlan routing protocol

[@shinpham6014]

i have dchp for 3 pc but i can not ping to each other. can you help me

[@gurutechnetworks]

Check your intervlan routing protocol

[@JKRowl]

Thank you so much! ❤️ Love this!

[@gurutechnetworks]

You're so welcome!

[@areejnisrinatul]

I cant do this with IPv6, can u help me to solve that problem?

[@gurutechnetworks]

sure, very easy. here ruclips.net/video/BrmrkOTMhAE/видео.htmlsi=WHdXLJdl4RDEwaWF

[@areejnisrinatul]

@@gurutechnetworks thank u so much sir 🥰

[@dennis9199]

Thanks man, idk wht to do with this one, and now I know wht to do

[@gurutechnetworks]

Thanks for the feedback

[@lakeocean]

Thank you very much for your dedicated guidance. I am grateful for that! 💐

[@gurutechnetworks]

Thank you for the feedback

[@chamaragunasena6437]

Where is the other part of this video ?

[@gurutechnetworks]

coming soon

[@gurutechnetworks]

coming soon

[@ShaunDan]

@@gurutechnetworks hope fully you will put this soon at least by next week 😀😀😀

[@chamaragunasena6437]

@@gurutechnetworks Awsome if you can bring it before 5 MAY 2023 🙂🙂🙂

[@rusaikmufthi3761]

Can you make a video by using a multilayer switch instead of a router in this video, and with those 2 switches, put another switch as the 3rd and enable all 3 as separate vlans with 1 DHCP server. please

[@gurutechnetworks]

But that's exactly what has been done here

[@Krishna_Sharanam_Paramita]

Please publish project on ospf and BGP, ospf for internal nw and BGP for external nw.

[@gurutechnetworks]

Okay, that is on my list please

[@Krishna_Sharanam_Paramita]

@@gurutechnetworks thank you ☺️

[@Coolness6]

Why didn't you write ip for vlan?

[@gurutechnetworks]

Kindly check the title of this video

[@Coolness6]

@@gurutechnetworks Can you please help me with my project please give me a contact email I can't find anyone to help me please help me and I will pray for you

[@IllTapir]

i keep on getting apipa address not an dhcp address

[@gurutechnetworks]

Kindly rewatch the video keenly

[@gudurudevicharan9970]

Is this the end of the course ?

[@gurutechnetworks]

there more classes

[@nathanruben3372]

You do not need trunk interfaces between edge and multilayer switch

[@gurutechnetworks]

Depends on the topology

[@ahmed_3006]

you made it very simple thank you sm

[@gurutechnetworks]

Glad it helped

[@AleCat97]

thank you, you saved me!

[@gurutechnetworks]

Thanks for the positive feedback

[@shuaibhassan5572]

VerY Good work

[@gurutechnetworks]

Sure 😍

[@arunprakash2820]

Not working

[@gurutechnetworks]

It will work when you are attentive