Vlan and Inter Vlan Routing using Cisco Packet Tracer Vlan configuration step by step #cisco #ciscopackettracer #Vlan #intervlanrouting #routeronastick
the Rx pins of the switch are 1 and 2 and the Tx pins of the switch are 3 and 6. Whereas, the Rx pins of the router are 3 and 6 while the Tx pins of the router are 1 and 2. So how the did you connect the router and the switch with crossover cable? Its not necessary nowadays because of the introduction of Auto MDI X, so just automatically choose the cable as you have very poor knowledge.
She made an error when configuring the Router sub-interface by giving both VLAN 10 and 20 an IP address of 198.168.X.X. Should have been 192.168.X.X. How did it ping with the wrong config?
11:27 i followed all the steps except the router, i used 2901. But i dont have a fa0/0, it always says "Invalid interface type and number", what should i do?
encapsulation dot1q is not the standard developed for intervlan route?????? encapsulation dot1q inserts a vlan tag to the packet. So that when the packet reaches the switch from the router, the switch can use the vlan tag to identify the vlan through which the packet will be directed.
Holy shit was this a life saver, easy to follow and understand I managed to do this in Cisco packet tracer and in an at-home lab server with cisco actual routers. This is the perfect video to just do first then research afterwards get more descriptive of what each command does documentation
Turn on simulation and check whether the broadcast traffics are divided between your vlans. If your broadcast messages(by default pink envelops) from one vlan is not travelling to the other vlan, then your vlan is proper.
Follow some other video sir. This youtuber is a fraud. She made mistakes after mistakes. Now to answer your question, I dont see any pc 3.But the reason for having separate gateways for each vlan is because- for the trunk cable to be able to connect both vlans to one interface we need to do sub-interface, hence providing a different ip address to each sub interface. Thus for pcs under different vlans will have different gateways accordingly.
Please don't try to teach people when you lack proper knowledge. You are misguiding so many people. Guys please report to take down this video so that other people do not suffer.
Great walkthrough. You made it so simple to understand. Thank you!
THANK YOU SO MUCH WHO EVER YOU ARE. I PRAY THAT YOU GET A LOT OF HAPPINESS IN YOUR LIFE AS YOU HAVE SOLVED ONE OF THE BIGGEST PROBLEMS I WAS FACING.
thanku so much
the Rx pins of the switch are 1 and 2 and the Tx pins of the switch are 3 and 6. Whereas, the Rx pins of the router are 3 and 6 while the Tx pins of the router are 1 and 2. So how the did you connect the router and the switch with crossover cable? Its not necessary nowadays because of the introduction of Auto MDI X, so just automatically choose the cable as you have very poor knowledge.
Great to hear that
You will connect the trunk port to a hub????? hahhahahah
Could you possibly explain a little bit as you’re going along? Like, at all? It’d be nice to know the reasoning behind some of these actions
She made an error when configuring the Router sub-interface by giving both VLAN 10 and 20 an IP address of 198.168.X.X. Should have been 192.168.X.X. How did it ping with the wrong config?
Maam this is just a piece of cake which makes understanding easy
Thank you so much. You just gave me a deeper understanding of this concept
Thanksyou Ma'am.But i just wanna say we can connect switch to router with straight cable also...
I can say,it is the best video to understand intervlan simply...❤
the best video on the internet, thank you for making this video, such a great help.
Really appreciate your help 😊❤
Thank you very much for this tutorial, it was easy to follow and helped me learn what I could not learn in my networking class.
11:27
i followed all the steps except the router, i used 2901. But i dont have a fa0/0, it always says "Invalid interface type and number", what should i do?
बहुत बडीया video है मॅम, अच्छे से समझ मे आ गया. पण तुमचा आवाज एकुन वाटय कि तुमचा बोचा झवायला लय मजा येईल. बोचा चा पुर्ण बोगदा करुन टाकेन मी.
encapsulation dot1q is not the standard developed for intervlan route??????
encapsulation dot1q inserts a vlan tag to the packet. So that when the packet reaches the switch from the router, the switch can use the vlan tag to identify the vlan through which the packet will be directed.
Lascaro is better
How To configure two VLANs (one for wired LAN and one for WiFi) in Cisco Packet Tracer,??
kindly share any video based on this question..
Holy shit was this a life saver, easy to follow and understand I managed to do this in Cisco packet tracer and in an at-home lab server with cisco actual routers. This is the perfect video to just do first then research afterwards get more descriptive of what each command does documentation
Good video, thanks.
thank you so much you dont know what you just did to me
may God bless you
I'd like to thank you for this tutorial, it helped me, very easy to follow and very well explained.
Thanks for the video, it’s really helping me understand
connection cable for switch to router cable changed without any info. when?
Thank you lady, hello from Kurdistan ❤❤
Thankyou for the great explaination
Thank you! How can i check if i did it corectly, the vlan? To check that everything works.
Turn on simulation and check whether the broadcast traffics are divided between your vlans. If your broadcast messages(by default pink envelops) from one vlan is not travelling to the other vlan, then your vlan is proper.
errors: wrong default gateway ip when entering in router. error #2 wrong medium (cable) switch to router /Note: fixed during editing
just a heads up to everyone.
still doesnt work
Thanks, this was very good
Well done 👍🏿
how do you show vlan? wich command is it
Why the mag was failed at the end 😢
Thanks a lot dear.
why we have to use different gateway for pc 3 and 4 when they are connected to one switch and one router please help
Follow some other video sir. This youtuber is a fraud. She made mistakes after mistakes. Now to answer your question, I dont see any pc 3.But the reason for having separate gateways for each vlan is because- for the trunk cable to be able to connect both vlans to one interface we need to do sub-interface, hence providing a different ip address to each sub interface. Thus for pcs under different vlans will have different gateways accordingly.
how to allow access to internet to vlan0 but not to vlan1
Perfect. This video help me so much❤
Excellent explanation!
Please don't try to teach people when you lack proper knowledge. You are misguiding so many people. Guys please report to take down this video so that other people do not suffer.
Thank you for great sharing 😀 😊
Thanks for visiting
The video is not clear. It should be clear next time
@@emmanuelboateng5443 please change your you tube resolution to 720 or more, it would be clear 👍
This is very good
perfect 😊
very clear and easy to follow many thnx
Nice lecture
great tutorial
😍
Great video :)
Thanks
Thanks, this was very clear and easy to follow
Fantastic! Great explanation, I understood it very clearly! Love from Portugal!
isn't personnal and isn't racisme but horrible accent
Not just that, she doesn't even have a proper concept.
thanks