To be fair, the cummins trucks are really easy to drive. They just want to go. My wife learned how to drive a manual in an 05 6 speed that my buddy had. I have wanted an 06 or 07 5.9 6 speed for years. Now that I could have bought one, family car needs an update. Of course...
@@marshallaurusevage2755 yea I love my manual at times when I feel like driving my 12 valve but when it comes to practical driving my automatic 6.7 is nice. Don’t get me wrong that I love my manual tho.
I just learned to drive a manual semi tractor for my job and I’m convinced that manuals are the way of life lol beautiful shifting brother. Can’t wait for more videos.
I have 2010 Dodge Ram 2500 with manual 6-speed G56 and it has 250,000 miles and just original clutch went out due to dual mass flywheel started coming apart but the clutch disk was still in ok condition, I switched to single mass flywheel dual disk southband organic and already put 1,000 miles on it , huge improvement over stock clutch.
Thanks man! It's a southbend. I have had 2 southbeds in 2 different trucks and have put both through hell. Never had an issue, the clutch resistance is about double as hard to push but you get used to it!
Amazing video man I just subscribe to your channel will you please do more like this one only a lot longer because I love the sound of your truck. Stay safe man and I hope and pray that all is well with you.
My 68rfe with the 5 stage csp efi live tunes sounds very similar . Fun to drive but I can only imagine how fun it is to drive the manual.. my E/B sounds identical especially under a load with tow haul
I'm not to sure bother. The monitor was gone when I bought it and just finally got a job off the road so I can make more videos🤘 I will keep the channel updated here soon
Air intake, intake manifold, 5 in, full delete and I believe efi life, just bought it not to long ago so will definitely be digging into it and posting more content🤘🇺🇸
Tanner Fousha nice man my buddy has a southbend. It’s pretty loud but solid. I’ve got a Valair dual and love it. It’s super smooth but holds really strong. I have a couple videos uploaded of the exhaust pulling a trailer. Sounds ridiculous haha
I build cell phone tower so I have been traveling all this year. I haven't even had a chance to get into the truck and it was already deleted. I believe it is EZ links and I have a 5 position switch I fiddle with. Whatever it is it's clean hardly any smoke and runs good!
@@tannerfousha3154 probably not a stock clutch then. I’m sure it’s a dual disc. I had a 2014 g56 and it smoked the clutch out after a few days on a 150 HP tune by PPEI. This round I think I’m going with a stock or 40 HP with deleted emissions. I just want that sound again!! 😍😍
@@jaymanning3186 it is awesome man. And I had a southbend dual disk in a 2011. This feels the same. I also hear people Valair brand as well. I planned on using the truck to make RUclips content and everything I was knowledgeable in was already done🤣 on to more HP!
I only touch the clutch when I’m starting from a stop or coming to a stop in my kenworth! But I shift thousands of times a day and still get out of it and into either my 06’ compounded Ram 3500 or my 04’ Sti both sticks! Your cockpit looks a bit more tight then my 06’! Either way that’s why drivers suck now cause nobody is paying attention due to automatics!
Usually between 1500 and 2 if you're running a stock clutch. The aftermarket dual disks on mine rattle at a lower RPM than 1100. So after market is from 2-2300.
how does your shift so smooth? I have hard time making it shift smooth when letting out the clutch. It kind jolts unless i really wind it out to like 2300rpm or so.
Bro, what year and model is this? Sounds real nice. Would be cool to see a few more videos from ya, if you have the time. I'm a 12 valve man myself. Great driving skills too btw. 👍😅
@@tannerfousha3154 sweet! And no worries, I get that real life takes over and time can be tough to come by lol. Just another fellow enthusiast who appreciates a good sounding Dodge and skilled driving. :)
@@ANErussian - Used to be you could order them from the factory with the manual transmission, but they stopped doing it a few years back. The one he's driving in the video is one of the last to have a factory manual transmission. If you look around online, they're out there, but they're hard to find. People who know how special they are hang onto them.
Do you play any Sports such as Basketball? What kind of exercises do you normally do when you work out? How long and how often do you normally work out?
@@mudog35 just adding reliable horse power and using it as a hot shot rig. Eventually going to rebuild it when it gets enough miles or buy the next generation. Just like truck stuff and want to share👍
Great driver! Nice and smooth action with the clutch. It's awesome to see someone not only drive manual, but do it WELL!
I appreciate you man, I plan on posting a lot more content and building the truck✊
To be fair, the cummins trucks are really easy to drive. They just want to go. My wife learned how to drive a manual in an 05 6 speed that my buddy had. I have wanted an 06 or 07 5.9 6 speed for years. Now that I could have bought one, family car needs an update. Of course...
@@kuhndog-1196 I learned to drive stick and my grandpas 98 vp
A sound that will never, ever get old!! : A manual 24 valve Cummins! Once u own 1, u will never, ever want an automatic!!
I’m borrowing one right now and all I can tell you is I feel like I’m having a ton of fun driving it.
@@marshallaurusevage2755 my nv5600 with a southbend single sucks balls in traffic.
@@Sackmatters leave it in first or keep it slow in second and just stay back from traffic
Cummins is great, I would like to have a Truck like that.
@@marshallaurusevage2755 yea I love my manual at times when I feel like driving my 12 valve but when it comes to practical driving my automatic 6.7 is nice. Don’t get me wrong that I love my manual tho.
I just learned to drive a manual semi tractor for my job and I’m convinced that manuals are the way of life lol beautiful shifting brother. Can’t wait for more videos.
I learned how to drive manuals back in 1999 and I still feel the same way!!lmao
So much more control over the vehicle. Only problem is if the cruise control gets turned off suddenly lol. That'll wake you up real quick. 😂
Until your older den 55 (& left knee arthritis starts settin in)
The exaust brake on these trucks are unbeatable they work and sounds good
Dude that exhaust brake and whistle!!! 🤤
That exhaust break noise!
Its even more throaty with a load, thanks man!
This is definitely a dream truck of mine. Nice video man!
I appreciate it man thank you. All of your guy's feed back has inspired me to do a lot more content and be out there. Thanks a million times🙏
he uses signals, that's it. I'm convinced, he IS a good driver
🤣
That’s one mighty fine manual RAM you got there boy!
Nothing like a manual cummins. My 04 with a nv5600 and south bend single mass clutch are amazing. I just wish I had an exhaust brake.
I have 2010 Dodge Ram 2500 with manual 6-speed G56 and it has 250,000 miles and just original clutch went out due to dual mass flywheel started coming apart but the clutch disk was still in ok condition, I switched to single mass flywheel dual disk southband organic and already put 1,000 miles on it , huge improvement over stock clutch.
This dude has such a rare truck, hopefully he keeps it forever
What year and trim package is this one? Looks beautiful
I’d love to put one in my Titan XD Cummins. It already has a crazy sounding downspool, couldn’t imagine the sounds it would make shifting gears.
stock clutch? my 18 g56 clutch is slipping since deleteing. Between clutchmasters and southbend but cant decide. Truck sounds awesome BTW
Thanks man! It's a southbend. I have had 2 southbeds in 2 different trucks and have put both through hell. Never had an issue, the clutch resistance is about double as hard to push but you get used to it!
Which southbend are you using? I’m using the organic twin disk. She’s stiff
Try not using the clutch when shifting.
@@danerickson1733 do not try this
@@MK5JETT why? Never had any issues.
Amazing video man I just subscribe to your channel will you please do more like this one only a lot longer because I love the sound of your truck. Stay safe man and I hope and pray that all is well with you.
Dagum bottle rocket exhaust brake lol, love a 6spd cummins, i drive a 5.9 6spd
Favorite truck I've ever had! Kepp on shifting brother lol
Sounds good!
What are the pros and cons of engine braking?
Love that sound
My 68rfe with the 5 stage csp efi live tunes sounds very similar . Fun to drive but I can only imagine how fun it is to drive the manual.. my E/B sounds identical especially under a load with tow haul
Please tell me the truck was already warm...
She's always warm before I give er the beans brother man
Manual with diesel is a perfect combination ever.
Nice truck, have the same trans 3500,keep that engine break on helps with the veins.
Thanks for the tip brother!
Definitely a classic now, I'm surprised u actually found a 2018 manual .
@@rudolphblair8577 I know I bought it just a few months ago. 37k miles, already deleted, 5 in, intake manifold, southbend dual disk. Feel pretty lucky
That efi live tune you have has a tow tune right? I'm thinking of getting a 6-speed and get that tune and pull my trailer with it.
I'm not to sure bother. The monitor was gone when I bought it and just finally got a job off the road so I can make more videos🤘 I will keep the channel updated here soon
Where did you get a standard transmission? Wooow!!!
Looked a long time brotha!
Thing is sick. I need a fourth gen stick now lol
Nice! I have the same setup minus the g56
Hell yeah just like a semi!!
Does Dogde Ram still make stick shift trucks as of this writing?
2018 was the last year
@@HEYSERG So are manual transmissions almost obslete?
@@sigglass2183 for this type of truck yeah
@@HEYSERG I mean't all veheicle brands.
Oh. Yeah it’s a few still floating around
Here i am with a nv5600 like man how you going in reverse in second?? lmfao
I have a 2018 3500 megacab g56 Laramie tuned and deleted and it’s an animal!!!
They are! Super fun to drive and love the sounds!
Sounds good brother
When you start up the truck how do you get the turbo to spook like that on startup?
You drive with catalysator?😄
Sounds good man what’s done to it?
Air intake, intake manifold, 5 in, full delete and I believe efi life, just bought it not to long ago so will definitely be digging into it and posting more content🤘🇺🇸
Tanner Fousha nice man do you know why clutch is in it? I have a 2017 Cummins g56. These trucks are dope
@@Haydini69 They sure are man! I had a 2011 with a southbend dual disk and this feels the exact same im sure thats what it is.
Tanner Fousha nice man my buddy has a southbend. It’s pretty loud but solid. I’ve got a Valair dual and love it. It’s super smooth but holds really strong. I have a couple videos uploaded of the exhaust pulling a trailer. Sounds ridiculous haha
I am fully deleted with a SD CAI, my turbo spool is very loud. so is my EB. poor neighbors.
What tune and HP did you go with? Stock clutch? I have a 2015 Laramie mega cab 6spd and want to delete soon!
I build cell phone tower so I have been traveling all this year. I haven't even had a chance to get into the truck and it was already deleted. I believe it is EZ links and I have a 5 position switch I fiddle with. Whatever it is it's clean hardly any smoke and runs good!
@@tannerfousha3154 probably not a stock clutch then. I’m sure it’s a dual disc. I had a 2014 g56 and it smoked the clutch out after a few days on a 150 HP tune by PPEI. This round I think I’m going with a stock or 40 HP with deleted emissions. I just want that sound again!! 😍😍
@@jaymanning3186 it is awesome man. And I had a southbend dual disk in a 2011. This feels the same. I also hear people Valair brand as well. I planned on using the truck to make RUclips content and everything I was knowledgeable in was already done🤣 on to more HP!
I’ve had my 03 6 speed for 7 years and used the stereo a handful of times maybe 😂😂
1998 12 valve Cummins now with G56 4x4 AFC LIVE AND FROM AUTOMATIC TO G56 is a Awesome Truck now pulls 32’ Gooseneck trailer much better
Thats some serious ear bacon
How’s cab drone on the highway?
I only touch the clutch when I’m starting from a stop or coming to a stop in my kenworth! But I shift thousands of times a day and still get out of it and into either my 06’ compounded Ram 3500 or my 04’ Sti both sticks! Your cockpit looks a bit more tight then my 06’! Either way that’s why drivers suck now cause nobody is paying attention due to automatics!
Sounds nice. But it ain’t no 02’ High Output 24-valve.
That it is not my friend. You like the sound of those better eh?
Wassup man thinking about getting one of these myself what rpm you normally shift at
Usually between 1500 and 2 if you're running a stock clutch. The aftermarket dual disks on mine rattle at a lower RPM than 1100. So after market is from 2-2300.
Thanks man
Learn to “feel it” man!💪🏼
What year is that
2018 brother
@@tannerfousha3154 didn’t know manuals were still a thing
what year is it?
What year is the truck
A 2018 sir
how does your shift so smooth? I have hard time making it shift smooth when letting out the clutch. It kind jolts unless i really wind it out to like 2300rpm or so.
Mines does to brotha i just give it a good full pause off the peddle before disengagement of the clutch.
Driving a synchronized manual isn’t much harder than driving an auto. Shift an 18-speed EatonFuller once.
@@zackzander425 Been there done that. I’ll stick with my 13 speeds. Hell even 10 speeds if it isn’t to heavy.
Easy, considering half the shifts are you staying in gear, letting off the gas and flipping a switch lmao. Drive a double stick and then we can talk.
No, my dicks bigger
What year is this truck?
2018 brother. I'm going to get another video up here soon. Life is finally settled down.
I wish these manufacturers would offer a manual again.
Bro, what year and model is this? Sounds real nice. Would be cool to see a few more videos from ya, if you have the time. I'm a 12 valve man myself. Great driving skills too btw. 👍😅
It's a 2018 Laramie! I've been a real pos but plan on making some more content. Still got er so I'll get some videos out!
@@tannerfousha3154 sweet! And no worries, I get that real life takes over and time can be tough to come by lol. Just another fellow enthusiast who appreciates a good sounding Dodge and skilled driving. :)
@@tannerfousha3154 how did you end up with a manual Laramie ?
Is this a swap or a factory order ?
@@ANErussian - Used to be you could order them from the factory with the manual transmission, but they stopped doing it a few years back. The one he's driving in the video is one of the last to have a factory manual transmission. If you look around online, they're out there, but they're hard to find. People who know how special they are hang onto them.
What programmer did you use
Sad as it is I bought it used and already tuned. Have been working a lot but by January I'll have some more videos out!
Its just got the 5 position switch and no monitor
Nice standar
0:06 starter
Sweet!
Do you play any Sports such as Basketball?
What kind of exercises do you normally do when you work out?
How long and how often do you normally work out?
No Basket ball. I go 6 days a week and follow a split such as. Legs, chest and tricep, back and biceps, shoulders, then calves and abs🤘
love hearing the turbo spool up
What year truck
2018. Last year!
And now i have the itch to drive one myself
Nice
Makes me want to trade in my 18 68RFE
They are nice but built autos are there own animal
Good luck finding a 19 model manual i think 19 was the last year for them
take it muddin for us
Oh she won't have an easy life my friend, were going to put a bunch of bark in her and rip it🤙
take it muddin get it stuck and film the wheels spinning for long time !
@@mudog35 if I wanted to mud I'd buy a truck for it, this one is for other purposes 👍
what purpose is it for ?
@@mudog35 just adding reliable horse power and using it as a hot shot rig. Eventually going to rebuild it when it gets enough miles or buy the next generation. Just like truck stuff and want to share👍
These trucks are getting hard to find.
They are and I feel very lucky to have owned 1
@@tannerfousha3154 I had an ‘07 5.9 dually. 4x4 crew cab. The works. G56. It was a beast. Was totaled in a wreck
@@tater0909 I can’t imagine what the other car looked like
@@MK5JETT it was an 18 wheeler.
Only if you had a better audio from out side and inside
🐏👍🏻
🤘
Listen to hino ak1j engine sound
😍
I wish my ram was a manual. Smh
Great shifting but maaaann are those shoes ugly
🤣👍🏽
ruclips.net/video/coyMil9mV9o/видео.html I DONT want this to happen to you watch the link
Be a man shift without the clutch
This probably a mod
ABRE A JANELA FILHO
Put those tow mirrors up
yeah ok and look like another idiot on the road
It’s too bad the trucks made around the Cummins are piles of garbage
Shifting with the clutch like a sissy give er the gears🤣 some people have such nice vehicles and just suck at driving them
You buy a $70k truck and show us how it's done then
Nice troll.
its a synchro trans you idiot. not a eaton truck trans.