How to Replace Fuel Pump 1995-2001 Ford Explorer

Buy Now!
New Electric Fuel Pump from 1AAuto.com 1aau.to/ib/1AFPU00243
This video shows you how to install a new TRQ fuel pump with integrated sending unit in your 1995-2001 Ford Explorer. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This process should be similar on the following vehicles:
1995 Ford Explorer
1996 Ford Explorer
1997 Ford Explorer
1998 Ford Explorer
1999 Ford Explorer
2000 Ford Explorer
2001 Ford Explorer
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obaw/1AXAA00013
• 19mm Socket 1aau.to/o8o/1AXAA00043
• Fuel Line Disconnect Tool 1aau.to/oT/1AXAA00041
• Pliers
• 1/2 Inch Impact Gun 1aau.to/opD/1AXAA00252
• Ratchet 1aau.to/obpS/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/obep/1AXAA00015
• Torque Wrench 1aau.to/oatL/1AXAA00044
• Gloves 1aau.to/oKo/1AXSS00048
• Paper Towels 1aau.to/oy6/1AXSS00035
• Rust Penetrant
• Safety Glasses 1aau.to/oDW/1AXAA00343
• Floor Jack 1aau.to/oVn/1AXAA00068
• Jack Stands 1aau.to/oN3/1AXAA00065
• Pick 1aau.to/oII/1AXAA00037
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@scottkeeler2306]

I haven’t seen or heard any mention about the motor. Is it the same process for the OHV and SOHC MOTORS?

[@aaronholmes-black6621]

Is the Jack used to lower the Gas Tank Skid plate and Gas Tank a Transmission Jack with add-ons?

[@HummerH-mo4cs]

Very nice, thank you period replace the fuel pump, but it looks like the whole unit was New and replaced when you reassemble?

[@jonleone777]

What can you do if the plastic clip on the green component breaks. Mine was so brittle it crumbled when i attempted to squeeze it in order to remove

[@classicstangbrn8964]

Busted, what happened to the unit you took out, the one you put in is brand new, clamps and all. You don't need an adapter connector with the old unit?