High Performance 5" Freestyle FPV Drone Cinematic Build Video | PattyFlipz Style | Skyliner MKIII
HTML-код
- Опубликовано: 15 апр 2023
- If you enjoyed the video, please like, subscribe and leave a comment or feedback! Would love to hear from you. I made this video for fun and I am not affiliated with Rotor Riot, or sponsored with any of the products below. Hope you liked it!! Watch it on a rainy day or when you're itching to build! XD.
~PattyFlipz FPV
Capturing the Spirit of FPV drones!!!
Note: If you go blind looking at my shotty solder work, I am not responsible. It's hard to do when there is a camera and tripod directly in your way XD
If you liked the content, want to see more, or would like to support my channel or buy me a coffee: www.paypal.com/paypalme/protofpv
For Business or sponsorship inquiries, email me at info@protofpv.com
---
Build Specifications and Affiliate Links (I receive a small commission if you purchase from the links :)
Frame Kit: Rotor Riot Skyliner MKIII
Motors: GEPRC 2107.5 1960kv 6S geprc.com/product/geprc-speed...
Props: HQ PROP Juicy J40 5.1"
Stack: MAMBA MK4 F722 APP 45A www.diatone.us/collections/ma...
Plug: XT60 all blacked out
Racewire: Rotorriot brand Purple
Receiver: TBS Nano RX Pro with Immortal-T V2
Antenna: TrueRC MATCHSTICK 5.8 - CARBON SMA LHCP
VTX: Naked Caddx Vista w/Polar
Custom Translucent white 3d prints
Custom SMA antenna mount
iFlight Mach R5 Receiver Antenna mount
All Lightweight aircraft aluminum 7075 Red/Blue/Black Screws
Titanium Gopro mount Screw and nut
Ummagawd Lipo Grip
Dry Weight: 384G
---
My Gear:
Batteries Used: 6S (for the motors I chose) - Tattu 1200 ~ 1300 130C and up
Smoke Stopper: geprc.com/product/geprc-smoke...
Transmitter: TBS TANGO 2 V3
Goggles: Dji Goggles Integra and Dji goggles V2
@RotorRiot @LeDribFPV @geprc @TeamBlackSheepFPV @ummagawdFPV @CADDXFPV - Развлечения
Your film work is top notch! Your build is also clean.
The second sentence is lies! 😅🤣🤩 Thanks Brotha!!
Randomly came across your video and was shocked to see that you also fly by Fraser Way and Glenlyon Pkway! I fly there all the time! Great build, by the way. Maybe one day I'll catch you there!
Yeah it's a great place, especially on Sundays, and class G airspace. Good place to destroy quads too! LOL
All that smooth and clean work. :)
Me: Does same but smashes it straight into a brick wall. :|
hahaha! If you zoom into the video close it's not clean at all, or I'm just good at editing XD Thanks for watching bro.
Editing 10/10
Build quality 6/10
Removed several point for overall score also, for showcasing hypersmoothed footage.
Thanks bro. Yeah I don't use rocksteady anymore. I realized It ruins the footage by twerking when you go upside down.
Agreed! XD Thanks!
🔥🔥🔥🔥
Thx bro
That's the cleanest build video I've ever watched.
Thanks bro!
Holy shit, what a high quality video, fire music also. If you keep it up your channel will explode
well done first build I"ve ever watch from start to finish. :)
Man glad to hear it! Its a long video and I'm really happy it flowed well enough!
Thanks for sharing 👍
First build video i fully watched. The editing is so good that it never bores and the build is super clean.
Thanks bro!! Means a lot!
oh man, the quality of this video is crazy good, I really enjoy watching it. don't stop making video like this!
Thank you so much. I will try!!
So satisfying...
haha!! For sure! XD
cool build video, good work !
Thanks man!!
Great video! Very clean build.
Thank you Cristian
Nice build and vid!
Thank you kindly!! 👍
I love build videos. And this one is so cool. 🎉
Thanks man!!
Bravo, Well done my good sir!
Thank you 🙏
Dude, that's the nicest build video I've seen, I think. Those macro shots are fire! Ok, noticed a detail I wonder about: Did you put liquid electrical tape on the VTX antenna connector to secure it in place? Is that a thing?
Thanks Bro! Yes that is right! Because the caddx vista is naked, there are no secure stays. I use liquid electrical tape to just give it an extra bit of security in case of an accident. Easy to peel off and remove as well. Not sure if its a thing but just make sure you installed the plug (seated and click) very well before applying. 😅😂
this is a great video!
love it
Thank you!
What a beautiful build and video - fun idea with the safety goggles.
No GPS tho?
Thanks man! No gps on this one 👍 Its more of a freestyle close proximity quad to have fun with the environent close to you.
Awesome build video. Love it.
Thanks Bro!!
Nice drone build, nice video edit😊
Thank you so much!
Nice way of presenting the building process... it's usually tedious to make all component fit together but you made it look easy :)
Yeah! just a way to mental prep someone before a build but for sure I left out all the frustrations. Losing stuff. Redoing the solder work over and over. 😂
wow man very good vid very good as an editor I can only imagine the pain putting this masterpiece together lol big ups bro
Thanks Bro.. I actually filmed this 7 months ago.. So I totally been putting it off 😂
Awesome build video !
Thanks bro!!
Awesome ❤
YASSS! :D
Great build video! Could you provide a link to that liquid electrical tape?
Thank you! www.amazon.ca/Gardner-Bender-LTB-400-4-Ounce-Electrical/dp/B000FPAN2K/ref=sr_1_5?crid=1QDE8TEJX3614&keywords=electrical+liquid+tape&qid=1682635709&sprefix=electrical+liquid+tap%2Caps%2C147&sr=8-5
Bro even plugged a fan when connecting battery 💀
😂 the naked vtx runs 🔥🔥🔥
Wow what lense did you use to capture such sharp macro footage?
Hi thanks! it’s the stock lens of the Nikon z50. I think it’s 16-50mm.
Btw whats the board below the FC? Not the ESCs right, cuz they are on each arm?
Hi! It is the ESC. The ones on each arm is race wire LED lights only.
new subscriber here :)
What tool is that? that thing were you cut the standoff.
Hi! It's called a dremel. I was shaving down a M3 screw because it stuck out too much and I didn't have any shorter ones. In most cases it is not necessary. Cheers.
And its like a pliers right when you cut it?
@@allentituspaz3241 Oh yes those are small bolt cutters, they cut through thin metal screws or rod. Great to remove excess for reduced weight. No need to carry extra weight on drone. Before you cut, Thread in a metal nut as far in as you can. Then after using the bolt cutter or dremel so you can thread that metal nut it in and out over the rough cut area to re-thread and smooth it.
@@PattyFlipz thanks! Better have that kind of tool.
What are the LEDs you used?
Not sure what the brand it was but I bought them from the rotor riot store.
does anyone have a Link to the print file for the dji cam mount please. unfortunately mine doesn't fit
the file you have, are the 2 rear bolt holes off by a mm or is it completely off
@@PattyFlipzThe Bolt holes are fine. I have two parts in total. Once got a print for the drone with a go pro mount that fits well. But the second print where the camera itself is in, which is connected with the first print does not fit. The Cube is to small.
@@silbaz1043 Oh I see. I'm assuming you don't have your free magnetic case that comes with dji action 2 was left installed? I made that mistake once. I forgot it was attached, once removed it fits. I got my dji action 2 protective print from Brain 3d Printing. I got the version to fit the gopro mounting base. It slides in nicely, you can get a version with a slot to add a ND filter as well. Here it is: www.brain3d.co/products/stock-gopro-mounting-protective-case?_pos=3&_sid=18e5db7a7&_ss=r&variant=32284834070615
Never grind metal over top electronics like that wow...
LOL but it's way more fun!
can we connect with in insta
Sure message me anytime at pattyflipz fpv or email info@protofpv.com