Mercedes S Class W221 Side Marker Lamps faults, plus more... Fault finding and repair.

Поделиться
HTML-код
  • Опубликовано: 28 сен 2024
  • Consider to support my channel and all the hard work put into it at / lmautorepairs
    Thank you
    Hi
    Right, where to start?
    This 2011 S350 came to me with 3 different issues, I ended up sorting 2 of them on this video, and the last one on a follow up video...
    Link to that below...
    So, the mais issue, was this constant warning on the cluster indicating a fault with both of the from side marker lamps...
    It tooke me a bit untill I found the issue, but got there in the end...😋
    The other issue, was the parking sensors... poor workmanship by someone else...
    The last issue, which I actually tackled fist, ended up being resolved is the way it should probably be from the beginning, more on that at the end of this video...
    So, just follow me on this video to find out what was the problem and how to resolve it.
    Link to the video mentioned:
    • Mercedes S Class Progr...
    Hope you enjoy the video.
    Any questions or comments put them below.
    Like always, thank you for watching!

Комментарии • 28

  • @faroukkhan6777
    @faroukkhan6777 3 месяца назад +3

    Excellent Luis,, 👍

  • @brano2yt
    @brano2yt 3 месяца назад +3

    Thanks, very interresting video. That number plate messing sensors.. just wou. I think, the speed of battery powered tools let the people less thinking before they doing something. Just press the self tapping screw and done, who cares it makes a new hole.
    At start i was thinking sure some connector in the front or worse under dash was corroded, how wrong i was 😊

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад +1

      😊
      Yes, the lack of pride and attention to detail is astonishing sometimes...
      👍👍👍

  • @jackiemay9471
    @jackiemay9471 3 месяца назад +2

    good morning Luis

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад +1

      👋
      Morning!
      👍👍👍

    • @timmehlittleloud2251
      @timmehlittleloud2251 3 месяца назад +2

      First of all, good fix on the radio. Initially I thought it could be a temp sensor fault on the heatsink with the fan running all the time. Maybe it is supposed to. And when you asked the customer when the faults occurred I bet he became vague. They never tell you the whole tale. Even when you try to explain that without the full story the repair will likely be more expensive. Unless he has just bought the car he knew the light module had been changed. Fibber tax to be added next time 👍

    • @jackiemay9471
      @jackiemay9471 3 месяца назад +2

      @@LMAutoRepairs that radio module he should have given it a go he had nothing to lose but time if your fix worked he is putting in a good one and paying for nothing makes me think you are doing your work way to cheap

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад +1

      @timmehlittleloud2251
      Fiber TAX... that a good one!😂
      👍👍

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад +1

      Agree... but believe me, this is not the end of this story...😊

  • @joej9247
    @joej9247 3 месяца назад +2

    You made a complex job look easy.. Well done, people with your skills and knowledge are very hard to find

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад

      😊
      Thanks!
      Really appreciated!
      👍👍👍

  • @RotaruSergiu90
    @RotaruSergiu90 3 месяца назад +1

    As always , good job

  • @MrByootox
    @MrByootox 3 месяца назад +1

    If he's running an S class, he shouldn't be short of money.
    You've done a potential bonafide repair with those 3 caps you fitted.
    I think it only fair your time is covered.
    Still... Coding in a new module takes time...

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад

      😊
      Totally agree...
      👍👍👍

  • @andrewthompsonuk1
    @andrewthompsonuk1 3 месяца назад +1

    Over the years I have seen people get obsessed about a part on theif car. An S class Merc will always have some faults and replacing a module when its not necessary is a bad use of ones time a cash. Rust will kill that car and spending money on a non setting rust treatment would be a better spend...

  • @anapaulapereira3255
    @anapaulapereira3255 3 месяца назад +2

    top

  • @AmirXhaferi
    @AmirXhaferi 3 месяца назад +1

    The best thing you can do for now is purchase a new maxisys 919 or 909 , thank me later

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад

      Too much money for now...
      😋
      👍👍👍

  • @worroSfOretsevraH
    @worroSfOretsevraH 3 месяца назад +1

    So you buy a new oem module for $$$, and still you have to program it to work??

    • @LMAutoRepairs
      @LMAutoRepairs  3 месяца назад

      Yes... to adapt it to what is installed on the car...
      👍👍👍

  • @stanghp1
    @stanghp1 3 месяца назад +1

    Great video, what is the program you are running on the laptop?

  • @joaomorais6801
    @joaomorais6801 3 месяца назад +1

    Hi Luis good job again just charge good and proper don't let people messing about with you 😮