Any content with you and Gian is a good watch, I'm not fussed on whether its audm, jdm, gopedum, or usdm. I just appreciate that you make car content that feels like some normal people tinkering with cars, without a hammed up RUclips "personality/character"
Haven't finished the whole vid yet but I just wanted to drop a comment in to say that I continue to love the work you do and the content you boys are producing. Also, can't speak for anyone else but I'm certainly not sick of the Falcon content. Then again, I am a simple man, I see Falcon's and I click like haha. FGX XR8 owner here.
It doesn't matter if anyone is bored with the ford Benny as long as you are not, the content is better when you and gian are having fun, tldr; fuck everyone as long as you're having fun
Hello Benny waving from nevada USA, i found that using a seamstress tape works great for brake lines like that i used it to measure the brake lines on my airplane from brake caliper to fuselage, the seamstress tape flexible so it will go around corners and curves and usually 60 inches length 👍🏼
Pennies were copper. Nickels were nickel. Dimes were silver, so smaller than nickels. Quarters, Half Dollars and Dollar coins used to also all be silver.
I am planning to put my whole handbrake master cyl and (modded) lever under the car hooked up the factory hand brake cable linkage up the back by a strong spring so the shoes still work (crappy as they are) and the hydraulic can still lock the back up too. In theory that should be legal because the factory handbrake is unmodded and working as normal. It just activates the hydraulic one at the same time so the legal safety requirement that the handbrake employ a completely separate system to lock the wheels is intact.
Could put a double bend in the hydro brake lever, low bend toward the driver, then higher bend toward centre of car. To shift the top of the lever towards the driver. But, hey, you’re the mechanic!
Careful with reverse as the lockout solenoid only allows the gearbox to go into reverse with the engine running. Unsure for b series but my fg does this with the 6 speed manual
Ba let's you physically select any gear but ecu enables a solenoid that disables the actual reverse gear from engaging if wheel speed is more than 10k I think
Just in case the sensi sensitive types think I'm picking on Ford(owned several) here....🖕 Chevrolet.....Cracked Heads Every Valve Rattles Oil Leaks Every Time.
Any content with you and Gian is a good watch, I'm not fussed on whether its audm, jdm, gopedum, or usdm. I just appreciate that you make car content that feels like some normal people tinkering with cars, without a hammed up RUclips "personality/character"
Haven't finished the whole vid yet but I just wanted to drop a comment in to say that I continue to love the work you do and the content you boys are producing. Also, can't speak for anyone else but I'm certainly not sick of the Falcon content. Then again, I am a simple man, I see Falcon's and I click like haha. FGX XR8 owner here.
Yeah nah yeah mate! Oath! They are absolutely killing it. Absolutely loving the vibe
It doesn't matter if anyone is bored with the ford Benny as long as you are not, the content is better when you and gian are having fun, tldr; fuck everyone as long as you're having fun
I think you’re finally getting to the perfect Benny/Gian editing ratio with this one.
Lovin the low buck low stress falc build, defs not bored of it
Benny quote don't like dirty hands on my seat, preach boy, preach ;P
Fun
To come up next episode
(for the algorithm)
Hello Benny waving from nevada USA, i found that using a seamstress tape works great for brake lines like that i used it to measure the brake lines on my airplane from brake caliper to fuselage, the seamstress tape flexible so it will go around corners and curves and usually 60 inches length 👍🏼
favourite series so far for me!
Why do people complain about content, loving this series, great video MEN
Superb episode as always lads, enjoying the build progress!
Banter is on point as always!
I really Enjoyed Watched his Episode Good job Benny Fixing up Ford FALCOON it looks amazing Well Done👏👏👏👏👏
The rotory door look love it.
Handbrake in reverse in a RWC car at speed on full lock helps flick that J turn. Trick it to dab it just after the car starts to rotate. ;)
here's a comment for the algorithm. also yay benny and the g man
Benny, hit up Mal Wood automotive for the shifter bushes, he sold me a kit to stiffen mine when I had the same issue as you.
Drift Smurf is coming together.
Pennies were copper. Nickels were nickel. Dimes were silver, so smaller than nickels. Quarters, Half Dollars and Dollar coins used to also all be silver.
I am planning to put my whole handbrake master cyl and (modded) lever under the car hooked up the factory hand brake cable linkage up the back by a strong spring so the shoes still work (crappy as they are) and the hydraulic can still lock the back up too.
In theory that should be legal because the factory handbrake is unmodded and working as normal. It just activates the hydraulic one at the same time so the legal safety requirement that the handbrake employ a completely separate system to lock the wheels is intact.
Could put a double bend in the hydro brake lever, low bend toward the driver, then higher bend toward centre of car. To shift the top of the lever towards the driver. But, hey, you’re the mechanic!
@@garya6647 it’s billet ally so not really easy to bend
I use string along the brake line then measure the string.
Benny, the Celine Dion comment 👌🤣
Careful with reverse as the lockout solenoid only allows the gearbox to go into reverse with the engine running. Unsure for b series but my fg does this with the 6 speed manual
Ba let's you physically select any gear but ecu enables a solenoid that disables the actual reverse gear from engaging if wheel speed is more than 10k I think
my 03 ba xr6 no traction control had 3 channel
Bend the brake arm to clear???
🤙
It should have lol 7:33
How long is a piece of string.. 😌
Twice the distance from an end, to the middle 😆
With all of his wisdom, how the hell doesn’t Benny know to use string / wool / twine to measure shapes, lines or any other complex length…?!
@@aobdesigned3881 i have used wire before, just grabbed the tape as it was close
Fix Or Repair Daily
You’re on the wrong channel.
@@commentmachine1I'm not on the wrong channel champ, I've been here since day 1. Most of us here have a sense of humor.
Just in case the sensi sensitive types think I'm picking on Ford(owned several) here....🖕
Chevrolet.....Cracked Heads Every Valve Rattles Oil Leaks Every Time.
First On Race Day 😆
Audi - Always Under Diagnostic Inestigation
Mini - Mine Is Nine Inches
@@Chilled_Mackers Lol, Those are good ones !!
Asking sooooo many questions can be annoying, fyi
Moist
Mechanic skills 8/10 presenting skills 3/10 need to sprinkle some charisma into these vids
Ooh...charisma coach IN THE HOUSE !
@@LightBranches thx