This is by far one of the BEST tutorials on "How To Install A Hot Water Heater" that I've ever seen. Everything was pretty much elementary step-by-step. And to think what some of these plumbing company want to charge to do what he did in less than an hour is absolutely RIDICULOUS! I'm pretty handy and have always thought about replacing my own water heater since it would be a simple removal of the old and install new one with new fittings. I'm definitely going to save this video in my DYI folder for future reference.
My water heater went out on Friday July 5. I called some plumbers for a quote, and most were in the high $800 range. Decided to youtube it. Saw many videos from various sources, but yours was the most simplest, step by step video out there. After watching it twice, I decided to go ahead and take the plunge and replace water heater on my own. I'm not an expert handyperson, but watching your video twice gave me the courage to do it. Thanks a bunch for the simple explanations. You rock!
I consider myself an above average diy homeowner, taking on every project from threading black pipe to lime repointing. But this video educated me. Not so much on what he was talking about, but with how skillfully he did the fundamentals. Tube cutting, torch lighting, wrenching, etc. All were done with brute speed and yet the finesse that comes with years of experience. I can get nearly equal results but it takes me 10 times as long. Much thanks for the education!
Best video I've seen for a newbie like myself. My new BW 40 gal gas WH will be arriving tomorrow. I keep playing your video over and over, as this will be my first install of a WH. Thanks so much for the clear, concise, easy to understand narration and camera work. Local plumbing companies want $1495 to install a new gas WH and take away the old one. I bought a new BW online for $589. You saved me $900 with this video. Thank you, sir!!
Kendon Doris Hi Kendon. The install went great. ONLY because I viewed this video about a dozen times before the wh was delivered. I also made sure to have the plumbing fittings and extras I needed from Lowe's before I started. I took my time with removing the old water heater, then followed the instructions to the letter. It worked out great and the best part was the money I saved by doing this myself. Thank you for asking.
This is the best instructional video on water heater installation I have seen, very concise, detailed down to the materials that are needed, wrapped up in an easy to understand instructions. Good job man!
Thanks for the video...as I'm not an experienced plumber. I will admit that I bit-off more than I could chew but was successful in the end. This task took me 10 hours to complete (read on). Note: The confined space was located in the garage. And let me tell you; it’s been hot hear in Texas lately. Heck, it’s been so hot…I saw Superman in taxi cab. Anyway, I removed the original faulty water heater according to the video instructions. It was very obvious that every water line connection showed signs for water leakage and the connections seemed delicate/fragile to the touch. Nevertheless, I unpackaged the new water heater and installed all of the nipple fittings and used plenty of Teflon tape and paste for the gas line. I lifted the semi-heavy water heater into this confined space and installed the water heater according to the video instructions. I turned-on both the gas and water supply valves and lit the gas pilot per the manufactures instructions. However, the gas burner failed to light up and water began to leak at the ball valve. The brand new water heater came defective from the factory. I troubleshot as best I could and eventually contacted Whirlpool Technical Support. Unfortunately, the Whirlpool Help Desk technician (desk jockey), gave me a hard time all the way through. He said I needed a volt meter to help him troubleshoot. I told him I would have bought at volt meter at the time of buying the water heater if that was part of the installation process. He then wanted me to fax him the purchase receipt. In the end, he gave me a "Return Merchandise Authorization" number to replace the unit back to Lowes. Well, I reversed everything I had just done and returned the unit back to Lowes (2.5-hour road trip)…and made a pit stop at Chik-Fil-A. I looked like a mess. Fortunately, there was only 1 water heater left in the store. While in the store, I recalled the water supply line ball valve back at the house being leaky at the handle. But, the valve was soldered onto the water supply line. The only way to replace the ball valve was to cut it off at the supply line. So, I decided to buy ¾” “Blue Hawk” push fittings and new compression connection water hoses. I got back to the house and went to cutting the pipe. Immediately, water began to spew everywhere. I nearly "sharted" in the process because I had forgot to shut-off the main water line. I ran out of the garage like a chicken with its head cut-off and found the man-hole cover and water main by the side-walk. I popped man-hole cover open and frogs jumped out at me from every direction…and so did I. These guys were fat and juicy-looking. Again, I nearly “sharted” myself. I shut the water-line off and the water stopped flowing. Whew! I sanded the supply/return lines and installed the push fittings and new water compression connection water hoses. At this time, I became very tired and wired and almost started to laugh…”like what the !@#$ did I get myself into?” So there I am trying to fit this water heater that kept slipping through my sweaty hands and arms. I gave about 5 attempts and kept getting tired and tired. Finally, I slid the water heater in-place (nearly sharting again) and reconnected everything. I turned-on the gas and water supply valves and bled the lines. There weren't any leaks and hot water was regained. SUCCESS!!! By this time, I was wet with sweat from my head down to my butt. I collected all of my tools and drove home. BTW: I secretly took-on this task to surprise my best friend and his wife, who are on vacation. Now you understand why I was a bit terrified throughout the entire process. Next task…the new sink and garbage disposal. Wish me luck!!!
This is one of the best and most informative video lessons I have ever watch. You should Teach in a Tech/Trade school. Thanks for the Lesson. I am a Senior Citizen and I believe you are never to old to learn. You also helped me save my social security check this month. Thanks again.
Best DIY video I ever watched. After calling a few plumbers that never seem to come by and do the job. I’ll be doing this myself and following these crispy steps. Excellent video man, hopefully it’s as easy as you make it look haha.
This is some really good information. I go to school for plumbing and am looking at this video for a recap of the information I learned today in class.
Mr. Dan, Thank You for sharing your expertise on installing the water heater. I appreciate the time you gave to make the video and the desire you have to help your fellow man. Those traits are becoming more and more rare. I have installed a few water heaters in my life time but I just needed a little refresher. May God bless you.
You are a life saver my friend. I was trying to replace my unit with one identical to existing one with the exception of gas and water supply line locations. The flex hose idea saved me 400$. You the man!
Thank you, thank you, thank you!!! I was beginning to start sweating about sweating… I have watched enough and done enough to feel confident to sweat more pipes. The copper flexi-pipe you just showed however, looks like it will handily replace the stainless steel braided RUBBER tubing which I believe is causing black micro-particles to show up in in the tub two years after install of a New water heater… Apparently it's the rubber inside the stainless steel braid that breaks down where are you have chlorinated city water.... And while I was willing to replace the s.s. braided hose with freshly sweated three-quarter inch copper, I think you have just saved me a ton of time!...shee-it, and I was going to be so proud to show my sweating-prowess... Ahhhhhhh welllll.... ...grinnnn... So thanks again, Chas
Damn, this is such a good video to watch when trying to figure out how to install a water heater. Thank you so much for taking the time to upload this. Major props!
Am in the fence to replace my 12 y/o WH (due noises it makes knocking and rumbling) but worried about how much plumber will charge... NOW, YOU JUST CONVINCED ME TO DIY and save $$$. THANKS MAN!
The absolute best how to video I've ever seen on youtube. You are to be commended. Mine is still working, but I know it will have to be replaced very soon. I just had two estimates for $3,000 plus. I feel I can handle the install myself, thanks to you.
Starting my plumbing apprenticeship next week, so I'm researching little bits and bobs to refresh myself. I'm 16 by the way, so I've got a lot of learning to do!
If you don't have one, at least try knocking on the wall to see where the studs are...or in his case, push a screw thru existing holes to see if you hit a stud!
10/10 video, thank you so much brother! You saved me a ton of money and was only slightly frustrated because my old water heater was so old and different.
Great Video! Easy to follow instructions. With these instructions not only was I able to install a new water heater for the first time but was able to install the water heater without destroying it also. Thanks for the great instructions.
I know this is an old video, I wanna say thank you!!! I installed a brand new water heater and your video is by far the best info I could find. Thanks for making it!!!
your videos are top notch. You are a highly skilled plumber, but you are easy to follow and listen to, and your comments are so inclusive that even a DIYer like me won't likely make common mistakes. Thanks a lot Dan.
THank YOU!! your video is by far the BEST I have seen on Water Heater Installation!!! The Plumber here is so GOOD at explaining EVERYTHING that it's a true Gift to watch this..
Great video, thanks Danny! Here are some suggestions for other small add-on video topics: how to disconnect and remove an old water heater, what to do if the copper supply lines and gas line go directly to the old hot water heater, and any additional steps needed to remove/replace a power vent water heater.
Great video, I am replacing my water heater in my other home this weekend. Got all I need to know from this video, Thank you. To the point and professional.
Thank you , it is very professional installation and explanation . My 75 gallon hot water heater installed more than 11 years ago . Still working good , but I will not bring a plumber to rep me off . I will do it by myself the same way you you show . It is simple and easy . Thank you very much .
Thanks Danny. God bless you man. If I could give you more than 1 thumb I would. This really helped me a lot. I have straight pipes running on the old water heater that has gone bad after 20 years. I was worried about what to do, it looked like a lot of cutting and adjusting of rigid straight copper pipes and brass gas line was in order. But you solved that concern for me, now I know, I can go with flex pipes for both gas and water lines. Thanks again.
Thanks for such a detailed video. Our tank went out yesterday. I was debating whether I could replace it myself or spend $700 for a professional. You have given me the confidence to give it a shot. Thanks for all of the great tips (checking for leaks, tightness for the connections) along the way. I will update my comment when my install is complete. Well, we ran into some problems during our install where the existing tank shutoff valve was leaking and I didn't know what to do. I kind of panicked. Ended up calling a friend who is a plumber and had him complete the install. He knew exactly what to do. He cut our existing flexi copper lines and replaced them with stainless sharkbite connectors. He got everything up-and-heating in about 45 minutes. I guess that's the difference between a pro and an amateur like me. I am still glad that I at least tried. Thanks again for your video.
You are very good. Thank you for doing the video for us. You are a very good instructor. I am a woman and I have no knowledge about plumbing but just looking at your video I could understand more about the water heater, and if for some reason that I have to install one myself, I probably could do it. Thanks again for showing us. May you be bless with every things you ever need in life.
Dominic true, you make a valid point. considering the tank is 300 bucks, paying someone 500-700 labor every 6 years is worth it to me. i could see others doing it themselves. I personally don't want to deal with wheeling the tank downstairs and the old one upstairs and driving it off. i have no truck and would rather not hurt my back or get my hands nicked. ok, so i'm a sissy! :)
@@girlonlaptop the prospect of bring a new tank down the stairs into my basement and new one up sounds dangerous to me. i'll pass, but is see your point.
@@u235u235u235 thats the hardest part, pay someone $50 on craigslist to do heavy lifting, the rest is the easy part and will save you serious cash! Saving cash is earning cash.
Good job! You explained every step along the way and, more importantly, why you did what you did along the way. If you ever see a need to revise this "Install Presentation", you might start off by mentioning that before the old water heater can legaly be removed, some local municipalities require a "PERMIT" be "pulled" by either the Homeowner or his Plumber; and that there may be an inspection upon completion by the City that should catch any unsafe practices or installations. And finally, you might finish up by quickly summing up all of those steps by reviewing what you did. You know, the old Tell them what you are going to teach them (show them), Show them what to do", and finally, "review what you taught them"
Hey Daniel, the reason why you do not use compound on the flex connectors, is because they have rubber washers that act as the seal. This goes for anything that has washers or gaskets. Thanks for the question.
You are so detailed.. Thank you so much for putting this video together, now off to the garage with my laptop to install my water heater.. Again, thank you
Really good instruction. I do handyman work. I dont need to see another video. How2plumb is detailed and your camera person deserves a shout out for quality also.
REALLY appreciate this video - especially the part where you missed the stud. Realistic and practical, like how life happens. Thank you for this one. I gave it a thumbs up and will use it when I install my water heater next week!
Excellent video. I'm just starting to do some home projects -diy style. It's not as difficult as I'd imagined and with informative instruction like this , I have the confidence to forge ahead.
I purchased a 50 gallon Rheem water heater and they now come with 2 screws to attach the vent hood. They place them in the plastic envelope that hangs on the water heater with the installation manual. Love the loop trick. Still a great vid in 2018.
Nice work. Very good installation video. You should check for leaks before lighting the pilot. If you have a leak (you would have probably smelled it) you might get a BOOM! We don't want no BOOMS!
Excellent demonstration. This is a confidence inspiring video. Learned so much about heater installation. Really appreciate for putting this video out. I feel like I can try myself now. But I know it won't go as smoothly as you showed.
ATTENTION: The copper supply line he is using is awesome because he doesn't need a Dielectric Union. This tubing is built with a dielectric union, which properly separates the two metals. If copper and galvanize metals were to come into contact, an oxidation would occur which will ruin the rough plumbing near it and can shorten the life span of the water heater tank. The oxidation doesn't happen fast, it takes a couple years before you begin to see or notice the effects.
Excellent job, did exactly what you showed. Purchased the same water heater. First time install went perfect thanks to you! Thank you for sharing your knowledge.
25:20 The reason you would need to hold the knob 45 seconds to let the gas through even after it is lit, is because there is a safety thermocouple device inside that shuts off the gas when it does not detect enough heat. This prevents for some reason the fire is off, but the gas keeps running and creates a hazard situation. Once the fire is on and working for a bit, the thermocouple stays warm so it knows the gas is being burned instead of leaking to the air.
Strange homeowner didn't want a drain pan under it..., especially since they also didn't have a Thermal Expansion Tank installed. Great step-by-step video and the tips throughout, thanks!
Excellent how-to video. I almost think I can do it myself but will probably let my amazing plumber do it. I have to move my existing water heater to access the wall behind it (has a big hole that rodents are accessing.) The current copper pipes don't allow for any movement at all even though there is some slack in the gas line.
Excellent video Danny Well thought out and thorough and good humor about missing studs Keep up good works and thanks for sharing your experience Helped me immensely. Great part on the cloth straps used them found at plumbing supply shop wouldn't have know without this video For self tapping screws into tank how long and what number screw don't want to go to deep into tank thanks again
You're good. I'm not brave enough to try this myself. I feel uneasy about working with anything that involves gas or electricity. I'm going to try to find someone to install a hot water tank at a reasonable price.
very good.. very well put together. You left out what size sheet metal screws they are, unless I missed it. Other than that, very good. You know I'm sharing this with all my family and friends.
Fist time I have seen an demonstration of what a leaky pipe looks like during the soap test!
This is by far one of the BEST tutorials on "How To Install A Hot Water Heater" that I've ever seen. Everything was pretty much elementary step-by-step. And to think what some of these plumbing company want to charge to do what he did in less than an hour is absolutely RIDICULOUS! I'm pretty handy and have always thought about replacing my own water heater since it would be a simple removal of the old and install new one with new fittings. I'm definitely going to save this video in my DYI folder for future reference.
Excellent job and explanations!!!
He specifically says he's violating code, by not venting the T&P line outside..... best video ever... what a joke.
@@APNFORD 😪😪😪😪😪😪
@@APNFORD Also said the owner didn't want to
You shouldn't be touching gas if your not licenced
My water heater went out on Friday July 5. I called some plumbers for a quote, and most were in the high $800 range. Decided to youtube it. Saw many videos from various sources, but yours was the most simplest, step by step video out there. After watching it twice, I decided to go ahead and take the plunge and replace water heater on my own. I'm not an expert handyperson, but watching your video twice gave me the courage to do it. Thanks a bunch for the simple explanations. You rock!
You guy rock. This is called humanity at its best, empowering people with less means.
7 years later & the video is still on point... I’m doing my install Friday, will keep referring to this...5 stars
The best part of this video is that he gets to the point and doesn't make the mistake of liking the sound of his own voice, A + great video
MrNas921 👌
Hey what about the "drip leg," you did not install one?
This intallation has a lot of mistakes.
I consider myself an above average diy homeowner, taking on every project from threading black pipe to lime repointing. But this video educated me. Not so much on what he was talking about, but with how skillfully he did the fundamentals. Tube cutting, torch lighting, wrenching, etc. All were done with brute speed and yet the finesse that comes with years of experience. I can get nearly equal results but it takes me 10 times as long. Much thanks for the education!
The best water heater installation video. Thank you!
Best video I've seen for a newbie like myself. My new BW 40 gal gas WH will be arriving tomorrow. I keep playing your video over and over, as this will be my first install of a WH. Thanks so much for the clear, concise, easy to understand narration and camera work. Local plumbing companies want $1495 to install a new gas WH and take away the old one. I bought a new BW online for $589. You saved me $900 with this video. Thank you, sir!!
John Gonzales how did the installation go?
Kendon Doris
Hi Kendon. The install went great. ONLY because I viewed this video about a dozen times before the wh was delivered. I also made sure to have the plumbing fittings and extras I needed from Lowe's before I started. I took my time with removing the old water heater, then followed the instructions to the letter. It worked out great and the best part was the money I saved by doing this myself. Thank you for asking.
This is the best instructional video on water heater installation I have seen, very concise, detailed down to the materials that are needed, wrapped up in an easy to understand instructions. Good job man!
Thanks for the video...as I'm not an experienced plumber. I will admit that I bit-off more than I could chew but was successful in the end. This task took me 10 hours to complete (read on). Note: The confined space was located in the garage. And let me tell you; it’s been hot hear in Texas lately. Heck, it’s been so hot…I saw Superman in taxi cab. Anyway, I removed the original faulty water heater according to the video instructions. It was very obvious that every water line connection showed signs for water leakage and the connections seemed delicate/fragile to the touch. Nevertheless, I unpackaged the new water heater and installed all of the nipple fittings and used plenty of Teflon tape and paste for the gas line. I lifted the semi-heavy water heater into this confined space and installed the water heater according to the video instructions. I turned-on both the gas and water supply valves and lit the gas pilot per the manufactures instructions. However, the gas burner failed to light up and water began to leak at the ball valve. The brand new water heater came defective from the factory. I troubleshot as best I could and eventually contacted Whirlpool Technical Support. Unfortunately, the Whirlpool Help Desk technician (desk jockey), gave me a hard time all the way through. He said I needed a volt meter to help him troubleshoot. I told him I would have bought at volt meter at the time of buying the water heater if that was part of the installation process. He then wanted me to fax him the purchase receipt. In the end, he gave me a "Return Merchandise Authorization" number to replace the unit back to Lowes. Well, I reversed everything I had just done and returned the unit back to Lowes (2.5-hour road trip)…and made a pit stop at Chik-Fil-A. I looked like a mess. Fortunately, there was only 1 water heater left in the store. While in the store, I recalled the water supply line ball valve back at the house being leaky at the handle. But, the valve was soldered onto the water supply line. The only way to replace the ball valve was to cut it off at the supply line. So, I decided to buy ¾” “Blue Hawk” push fittings and new compression connection water hoses. I got back to the house and went to cutting the pipe. Immediately, water began to spew everywhere. I nearly "sharted" in the process because I had forgot to shut-off the main water line. I ran out of the garage like a chicken with its head cut-off and found the man-hole cover and water main by the side-walk. I popped man-hole cover open and frogs jumped out at me from every direction…and so did I. These guys were fat and juicy-looking. Again, I nearly “sharted” myself. I shut the water-line off and the water stopped flowing. Whew! I sanded the supply/return lines and installed the push fittings and new water compression connection water hoses. At this time, I became very tired and wired and almost started to laugh…”like what the !@#$ did I get myself into?” So there I am trying to fit this water heater that kept slipping through my sweaty hands and arms. I gave about 5 attempts and kept getting tired and tired. Finally, I slid the water heater in-place (nearly sharting again) and reconnected everything. I turned-on the gas and water supply valves and bled the lines. There weren't any leaks and hot water was regained. SUCCESS!!! By this time, I was wet with sweat from my head down to my butt. I collected all of my tools and drove home. BTW: I secretly took-on this task to surprise my best friend and his wife, who are on vacation. Now you understand why I was a bit terrified throughout the entire process. Next task…the new sink and garbage disposal. Wish me luck!!!
This is one of the best and most informative video lessons I have ever watch. You should Teach in a Tech/Trade school. Thanks for the Lesson. I am a Senior Citizen and I believe you are never to old to learn. You also helped me save my social security check this month. Thanks again.
Best DIY video I ever watched. After calling a few plumbers that never seem to come by and do the job. I’ll be doing this myself and following these crispy steps.
Excellent video man, hopefully it’s as easy as you make it look haha.
Best step by step instructional video I have seen on DIY water heater installation.
So far the best water heater installation video yet. Thanks!
No beating around the bush here! Straight to the point and no BS!
Thank you!
This is some really good information. I go to school for plumbing and am looking at this video for a recap of the information I learned today in class.
This really is a good video. Thorough explanations, great closeups, stable recording, to the point. Thank you.
Dude! You killed it!! This is how everyone should RUclips. Awesome job bro, thank you!
Mr. Dan, Thank You for sharing your expertise on installing the water heater. I appreciate the time you gave to make the video and the desire you have to help your fellow man. Those traits are becoming more and more rare. I have installed a few water heaters in my life time but I just needed a little refresher. May God bless you.
Best 28 minutes I've spent all week. Thank you soo much!
You are a life saver my friend. I was trying to replace my unit with one identical to existing one with the exception of gas and water supply line locations. The flex hose idea saved me 400$. You the man!
Thank you, thank you, thank you!!!
I was beginning to start sweating about sweating… I have watched enough and done enough to feel confident to sweat more pipes. The copper flexi-pipe you just showed however, looks like it will handily replace the stainless steel braided RUBBER tubing which I believe is causing black micro-particles to show up in in the tub two years after install of a New water heater…
Apparently it's the rubber inside the stainless steel braid that breaks down where are you have chlorinated city water.... And while I was willing to replace the s.s. braided hose with freshly sweated three-quarter inch copper, I think you have just saved me a ton of time!...shee-it, and I was going to be so proud to show my sweating-prowess... Ahhhhhhh welllll....
...grinnnn...
So thanks again,
Chas
Haha! I was going through the exact same "sweating". Water heater installed, no sweating, OR sweating. Great video though
Damn, this is such a good video to watch when trying to figure out how to install a water heater.
Thank you so much for taking the time to upload this.
Major props!
Am in the fence to replace my 12 y/o WH (due noises it makes knocking and rumbling) but worried about how much plumber will charge... NOW, YOU JUST CONVINCED ME TO DIY and save $$$. THANKS MAN!
The absolute best how to video I've ever seen on youtube. You are to be commended. Mine is still working, but I know it will have to be replaced very soon. I just had two estimates for $3,000 plus. I feel I can handle the install myself, thanks to you.
This is probably one of the best videos I have ever seen.
Thank you, we are going to replace a water heater soon,just like this one.
That was the BEST step by step how to install a water heater........thank you!!!
+Paul H Thank you!!!
@seamo9000deBuilder SUPERBEING about $1000 plus cost of water heater quoted today from HD installer
buying my first home next month. I've been watching your videos everyday
+dartagnan Jackson Nice thanks for the support!!!
This should be the Rheem's instructional video. Completely detailed!!! Thanks bro, keep up the good work
Starting my plumbing apprenticeship next week, so I'm researching little bits and bobs to refresh myself. I'm 16 by the way, so I've got a lot of learning to do!
Excellent demonstration. You explain so clearly. Best video on water heater I've seen on RUclips. God bless you man.
Add stud finder to the list? Great video though. The best one on how to do this on RUclips by far.
Marvin K. Mooney i
If you don't have one, at least try knocking on the wall to see where the studs are...or in his case, push a screw thru existing holes to see if you hit a stud!
10/10 video, thank you so much brother! You saved me a ton of money and was only slightly frustrated because my old water heater was so old and different.
Great Video! Easy to follow instructions. With these instructions not only was I able to install a new water heater for the first time but was able to install the water heater without destroying it also. Thanks for the great instructions.
I know this is an old video, I wanna say thank you!!! I installed a brand new water heater and your video is by far the best info I could find. Thanks for making it!!!
your videos are top notch. You are a highly skilled plumber, but you are easy to follow and listen to, and your comments are so inclusive that even a DIYer like me won't likely make common mistakes. Thanks a lot Dan.
+Alan Kovacs you're welcome! Thanks for the support!!!
THank YOU!! your video is by far the BEST I have seen on Water Heater Installation!!! The Plumber here is so GOOD at explaining EVERYTHING that it's a true Gift to watch this..
Thanks 🙏
Now that's what I call a detailed video. Excellent job sir! I will be installing an AO Smith gas heater this weekend. I hope it goes smooth as yours.
Can you use that thread connection tape and mega loc? I used both on installation of my new faucet and dishwasher.
Wow, thanks partner. I thought replacing my heater was way out of my league. But your video showed me that I can do it.
Great video, thanks Danny! Here are some suggestions for other small add-on video topics: how to disconnect and remove an old water heater, what to do if the copper supply lines and gas line go directly to the old hot water heater, and any additional steps needed to remove/replace a power vent water heater.
This is exactly what I was looking for. Thank you. Explained everything very concisely and your camera help showed exactly what I needed to see.
+Alexander Rogayan You're welcome, thanks for watching!
Finally, a guy that knows what the heck he's talking about! Thanks Dan!
Your instructions how to install water heater is very clear and anybody with little mechanical skill can do it. Thank you for posting your video clip
Great video, I am replacing my water heater in my other home this weekend. Got all I need to know from this video, Thank you. To the point and professional.
Very nice. I actually paid $150 for a water heater installation about three years ago. Thank you very much for charring your knowledge.
That was very well done. That was too easy to understand. You could not have been more clear. Great job!
Outstanding video, Danny. Clear,concise,very helpful, thank you. The part on the teflon tape
is a boon.
Thank you , it is very professional installation and explanation . My 75 gallon hot water heater installed more than 11 years ago . Still working good , but I will not bring a plumber to rep me off . I will do it by myself the same way you you show . It is simple and easy . Thank you very much .
Thanks Danny. God bless you man. If I could give you more than 1 thumb I would. This really helped me a lot. I have straight pipes running on the old water heater that has gone bad after 20 years. I was worried about what to do, it looked like a lot of cutting and adjusting of rigid straight copper pipes and brass gas line was in order. But you solved that concern for me, now I know, I can go with flex pipes for both gas and water lines. Thanks again.
Thanks for such a detailed video. Our tank went out yesterday. I was debating whether I could replace it myself or spend $700 for a professional. You have given me the confidence to give it a shot. Thanks for all of the great tips (checking for leaks, tightness for the connections) along the way. I will update my comment when my install is complete.
Well, we ran into some problems during our install where the existing tank shutoff valve was leaking and I didn't know what to do. I kind of panicked. Ended up calling a friend who is a plumber and had him complete the install. He knew exactly what to do. He cut our existing flexi copper lines and replaced them with stainless sharkbite connectors. He got everything up-and-heating in about 45 minutes. I guess that's the difference between a pro and an amateur like me.
I am still glad that I at least tried. Thanks again for your video.
You are very good. Thank you for doing the video for us. You are a very good instructor. I am a woman and I have no knowledge about plumbing but just looking at your video I could understand more about the water heater, and if for some reason that I have to install one myself, I probably could do it. Thanks again for showing us. May you be bless with every things you ever need in life.
just pay someone to do it, don't bother. tanks last 10 years why risk doing it wrong? you may replace 3 or 4 your entire life. not a skill you need.
Dominic true, you make a valid point.
considering the tank is 300 bucks, paying someone 500-700 labor every 6 years is worth it to me. i could see others doing it themselves. I personally don't want to deal with wheeling the tank downstairs and the old one upstairs and driving it off. i have no truck and would rather not hurt my back or get my hands nicked. ok, so i'm a sissy! :)
@@u235u235u235 some of us don't want to waste money paying others for things we can learn to do ourselves though.
@@girlonlaptop the prospect of bring a new tank down the stairs into my basement and new one up sounds dangerous to me. i'll pass, but is see your point.
@@u235u235u235 thats the hardest part, pay someone $50 on craigslist to do heavy lifting, the rest is the easy part and will save you serious cash! Saving cash is earning cash.
Excellent video!!. Best WH install on RUclips. Thanks
Great video. Just the right amount of talking and the video quality is excellent and instructions were right on.
jaknap1 PPP
Good job! You explained every step along the way and, more importantly, why you did what you did along the way. If you ever see a need to revise this "Install Presentation", you might start off by mentioning that before the old water heater can legaly be removed, some local municipalities require a "PERMIT" be "pulled" by either the Homeowner or his Plumber; and that there may be an inspection upon completion by the City that should catch any unsafe practices or installations. And finally, you might finish up by quickly summing up all of those steps by reviewing what you did. You know, the old Tell them what you are going to teach them (show them), Show them what to do", and finally, "review what you taught them"
Hey Daniel, the reason why you do not use compound on the flex connectors, is because they have rubber washers that act as the seal. This goes for anything that has washers or gaskets.
Thanks for the question.
One of the best videos I’ve seen on this topic. Very helpful very informational. Great job
This was a very easy video to follow. very informational and thourough and straight to the point.
Great video! You effectively explain step by step how to install a water heater. Great Job!
Thank you! We are about to install our first water heater and the model in this vid is the exact one we are using. Thank you!! Very clear directions.
Great demo! Based on this I would feel confident doing an install myself.
You are so detailed.. Thank you so much for putting this video together, now off to the garage with my laptop to install my water heater.. Again, thank you
man, u are so easy to understand and follow. The editing is great. Thanks a mil, young blood.
Thanks for the awesome video! I just replaced my water heater after watching your video in under an hour! Hardest part is the weight of the tank.
Really good instruction. I do handyman work. I dont need to see another video. How2plumb is detailed and your camera person deserves a shout out for quality also.
1,100,001 views as of 3/3/2022 - Nicely done!
1,143,320 as of 10/14/2022 - hanging in there as one of the best still!
Great video ever on water heater installation
REALLY appreciate this video - especially the part where you missed the stud. Realistic and practical, like how life happens. Thank you for this one. I gave it a thumbs up and will use it when I install my water heater next week!
Awesome demonstration! Thank you. Extremely thorough and professional. And that's coming from a school teacher! :)
Excellent video. I'm just starting to do some home projects -diy style. It's not as difficult as I'd imagined and with informative instruction like this , I have the confidence to forge ahead.
Best video on the subject that I've found so far - thank you!
Great video! One of the most helpful ones for water heater installment!
I purchased a 50 gallon Rheem water heater and they now come with 2 screws to attach the vent hood. They place them in the plastic envelope that hangs on the water heater with the installation manual. Love the loop trick. Still a great vid in 2018.
My man you did an awesome job couldn’t be any better I think I can install my own water heater now thank you
Thank you for this straight forward video. It helped me to install my own water heater today.
Nice work. Very good installation video. You should check for leaks before lighting the pilot. If you have a leak (you would have probably smelled it) you might get a BOOM! We don't want no BOOMS!
So far the best video I've found. Thanks.
Thanks for the support!
Excellent demonstration. This is a confidence inspiring video. Learned so much about heater installation. Really appreciate for putting this video out. I feel like I can try myself now. But I know it won't go as smoothly as you showed.
ATTENTION: The copper supply line he is using is awesome because he doesn't need a Dielectric Union. This tubing is built with a dielectric union, which properly separates the two metals. If copper and galvanize metals were to come into contact, an oxidation would occur which will ruin the rough plumbing near it and can shorten the life span of the water heater tank. The oxidation doesn't happen fast, it takes a couple years before you begin to see or notice the effects.
ezekieo32 also known as the process of electrolysis
Thank you for such a well put together video. Your instructions are clear and easy to follow.
Danny what a wonderful way of explaining , thank you very much
awesome video, clear to the point. Really nice. One of the best step by step I have seen. Thanks a lot.
Just the right amount of details, my installation went smoothly thanks to your video. Well done, thank you!
Thanks for taking the time to make this video! Very helpful!
Excellent job, did exactly what you showed. Purchased the same water heater. First time install went perfect thanks to you! Thank you for sharing your knowledge.
Thanks for being so thorough on the gas line hook up and testing for leaks. Many other videos just say, hook up the gas.
25:20 The reason you would need to hold the knob 45 seconds to let the gas through even after it is lit, is because there is a safety thermocouple device inside that shuts off the gas when it does not detect enough heat. This prevents for some reason the fire is off, but the gas keeps running and creates a hazard situation. Once the fire is on and working for a bit, the thermocouple stays warm so it knows the gas is being burned instead of leaking to the air.
Strange homeowner didn't want a drain pan under it..., especially since they also didn't have a Thermal Expansion Tank installed. Great step-by-step video and the tips throughout, thanks!
Excellent how-to video. I almost think I can do it myself but will probably let my amazing plumber do it. I have to move my existing water heater to access the wall behind it (has a big hole that rodents are accessing.) The current copper pipes don't allow for any movement at all even though there is some slack in the gas line.
Great step by step video. You make it look effortless. I will perfect my skills with this video. Thanks again.
Excellent video Danny Well thought out and thorough and good humor about missing studs Keep up good works and thanks for sharing your experience Helped me immensely.
Great part on the cloth straps used them found at plumbing supply shop wouldn't have know without this video
For self tapping screws into tank how long and what number screw don't want to go to deep into tank thanks again
Great Video. Nicely done. Clear and thorough. Thanks.
Este es el. Video más detallado q he visto thank amigo
like the way you expln in great detail on how to.
will give it a try and let you know how it turned out.
You're good. I'm not brave enough to try this myself. I feel uneasy about working with anything that involves gas or electricity. I'm going to try to find someone to install a hot water tank at a reasonable price.
very good.. very well put together. You left out what size sheet metal screws they are, unless I missed it. Other than that, very good.
You know I'm sharing this with all my family and friends.
Thank you for the well instructed video about gas water heater installation. Very Helpful. Thank you again
i love watching these kind of videos, today i fixed my own water heater thanks to youtube video makers.
I really like your method of teaching. You are Awesome!!! Thank you for sharing your knowledge and expertise with us. Blessings to You!
Thank you 🙏
Top notch! Very clear instructions, excellent camera work and very helpful.