McLaren Honda MP4-30 Ebbro Scale model kit build up video Part 7.
HTML-код
- Опубликовано: 11 апр 2016
- In this chapter Dave shows us how to wet sand and polish Gravity Colors 2 part clear coat that was sprayed on this Mclaren Honda Mp4-30 F1 model.
Авто/Мото
Ridiculous. And I mean that in the best of ways. The amount of work and attention to detail is amazing. Truly a master builder.
Great stuff! Very helpful.
Just a couple of pointers that will help give you a mile deep finish without those "star" haze circles that sometimes show up when light reflects off the finish. First, ALWAYS wash with warm water and soap when changing from one product to another when polishing a finish, this is so you don't contaminate the next stage of the polishing with any of the prior coarser grade product. And since all polishes and compounds have some sort of a lubricant built in it's very important to use soap to make sure you get it all. Second it's a good practice to get into when using the final polish and wax when doing it by hand do use a straight line front to back motion. This keeps the polish and wax from making those annoying looking circular haze lines you see when the light reflects off the surface.Third, ALWAYS use a fresh piece of cloth with every product change, again we're trying to avoid contamination from the prior product, just using a different part of the same t-shirt or piece of cloth won't stop you from accidentally getting some of the coarser polish onto what you're working on now.Third for the final wax and buff NEVER use a terry cloth or any "stringy" material, those little fuzzies will leave those hated circular stars and ultra fine scratches that keep the finish from having that super wet looking gloss you're looking for, something along the lines of a cloth baby diaper is preferred, if it's soft enough to not irritate their delicate skin it's good enough for your model. Hopefully you know to use new diapers not ones baby has already used, and when washing them do it by hand and let air dry, you definitely don't want any lint from another source on it. Another material I've had super luck with is the cloth that men's briefs are made from, they're lint free, soft and don't have any strings in their makeup. And if you have a problem with wax or polish build up in the nooks and lines I wouldn't recommend using even a soft toothbrush, again we don't want ANYTHING that could scratch it, I have a makeup brush, or a blush brush that I've trimmed down so the bristles are short enough that they can get into the cracks and seams to remove any excess, it also helps to do it when doing the final wash before show. Don't use anything but air to dry your precious super deep show finish, again you don't want to scratch it, you could use a chamois but it's hard to get one of them into recesses on a model.
Delton Streetman thanks for the tips
At the lowest speed and with the buffing wheel moist, the Dremel works actually pretty good with a quick light pressure.
NO SOUND from 5mn58 to 17mn10 , I'm very sad .... Thx to you
How long do you give the clear to cure before sanding and polishing.
I use Dupli-Color Paint Shop ready to spray Lacquer Gloss Clear with the airbrush only for my 1.0 HVLP paint gun I use PPG paint and clear
where i can get a several f1 model kits for a good price?? do you recommend buy from AMAZON? or a special company website? i want to buy at least 5 kits with fair or cheap price
serchmarc I realy like a website called rcjaz.
stunning! this inspires me to build better models. Than you
Many Questions as I own a ton of Gravity Colors Paints (But haven’t used Clear yet) 1st Question:I noticed that U put the decals on without Clear Coating 1st??! Seems to go against all methods out there???
2nd: How Do U clean Your surface after Decals were applied??? This seems to me that U R leaving yourself open to a BUNCH OF contaminants!! After applying Decals & leaving Who knows what on the finish your about to CC??
3rd: It seems to me that U might have many Contaminants U leave trapped behind CC layers 1 & 2? So will the Polish Get Those Out??
The Finish looks FANTASTIC!!! But as I mentioned I own 100’s of $$ of Gravity Colors products (I’m using it Exclusively from Primer to Base to Clear to Polish to AB Cleaner to well U get my point...😉).
Please help with my ?’s as I’m waiting for your answers before I CC my Build !!!
Respectfully
ZenModeling
aka:Lee
How do you like that model kit ???
Kskska
Jskskw