Drive Where Windows Is Installed Is Locked UEFI Mode FIX [Tutorial]
HTML-код
- Опубликовано: 21 авг 2024
- Fix for the “The drive where Windows is installed is locked” error that appears on Windows 8, Windows 8.1 or Windows 10 systems.
LINK: www.microsoft....
Issues addressed in this tutorial:
drive where windows is installed is locked Windows 10
drive where windows is installed is locked Windows 8
drive where windows is installed is locked unlock the drive and try again error windows fix
This tutorial will apply for computers, laptops, desktops,and tablets running the Windows 10, Windows 8/8.1, Windows 7 operating systems.Works for all major computer manufactures (Dell, HP, Acer, Asus, Toshiba, Lenovo, Samsung).
Did I help you? Consider a one time contribution to support new daily content on this channel. www.paypal.me/MDTechVideos
When I do list disk it says there is no fixed disks to show
virtual disk service error, the volume size is too big, WHat should be done for the next step ?
jitu shahed same thing here any solutions
To low, free space seems to be 0B
Music Lyrics Converter 2020 how do free space if you can’t enter your pc cause of bsod
I have the same problem.. has anyone figured out the solution
i got error volume size is too big
Wouldn't you lose all your documents if your format the primary partition?
do you lose your files with this method?
This tutorial was informitive , however he could have explained (briefly) what some of those last few commands steps were for.... Like he did in all of the earlier steps .... Ending the video with a brief summary of the Why's &Whens of the overall procedure implications ... other than that it was a good course .
when you foramt your all data lost ...do not use this ..i am lost all my personal data
I have followed your video but after I type List Disk I get the following
Disk 0 online 7680 MB (Status). 7679 MM (Free)Disk 1 online 29GB 29GB
I then selected disk 1it then states disk 1 is now the selected disk
DISKPART> list partition
There are no partitions on this disk to show.
DISKPART>
Can you please let me know if there is anything I could possibly do now ? As I can’t go any further with you video.
when i try bcdboot c:\Windows / l en-us /s h: /f all it all ways saying "Failure when attempting to copy boot files" please rep
Same
same :(
virtual disk service error, the volume size is too big. gg wp need help
HurpDurp same then reset after that
Has there been any update with the error "Virtual disk service error: the volume size is too big". It seems quite common yet I cannot see that anybody has managed to get it fixed after this error. My partition is around 450GB.
Use ntfs instead of fat32 when you enter the format line
bootrec /fixboot command is not working for me.
i m getting thing like "System cannot find the file specified."
plzzz help
I have followed everything except the last step showed "Failure when attempting to copy boot files" any solution?
Are you using a bootable media to access this?
I have the same problem use a usb recovery to access
@@MDTechVideos yes and i use a usb, everything worked well until now when trying to do the bcdboot
MDTechVideos fix??
Hey I have the same problem s just now, may I ask an alternative ?
Thanks man, I was trying to fix this for hours
You're welcome!
Why format for FAT32 as opposed to NTFS? Isn't NTFS the default file system since Windows XP?
Just a standard procedure copied from elsewhere. No explanation as to why particular commands were chosen. Slooooooowwww too.
You are a lifesaver! My drive had bitlocker encryption enabled but you taught me how to override it! You deserve a lot more recognition! Cheers❤️
You're welcome!
Last step, when writte (dir Boot).
Then device show (file not found).
Why?
But you successfully going to exit step.
The same here any news?
After" bootrec /fixboot" it says "the file system cannot find the file specified"
Help please!
many thanks for your sharing. finally i could format my pattion 3. i used "format FS=NTFS"
Glad I could help
@@MDTechVideos AFTER THE FORMAT GOES 100% IT SAYS VIRTUAL DISK SERVICE ERROR:THE VOLUME SIZE IS TOO BIG WHEN I FORMAT WTF IS THIS ? PLS HELP
@@bendovahkiin8405 I don't know why format in fat32 is not the format used for O.S. - fat32 has limitations in size per single file and maybe your error is related to that. For O.S. partition NTFS system is used. Warning that this system supports EFS encryption.
If I am using a usb drive, what do I put in on the command line that is showing cd ( x:\Sources>cd /d h:\EFI\Microsoft)
If you can kindly elaborate, I will do my best to assist.
@@MDTechVideos instead of using the disc i'm using an usb flash drive how would we determine the drive for the flash
Virtual disk service error : the volume size is too big , can you please help me thanks
Try fs=ntfs heard it from fellow commenter here
Hello & thank you very much for the information. I'm at the point of H:/EFI/Microsoft>bootrec /fixboot . I get access is denied. Any help would be greatly appreciated. Thanks
After 3 hours of these Fix It videos not work or cannot understand. So-oo glad you at least speak English I can understand.Have been without Internet and a computer over year now with no luck repairing. Plus no television to watch except movies I own. My only entertainment everyday has been my android phone. Fingers crossed this with work.
when i type in ( X:\Sources>cd /d h:\EFI\Microsoft) and hit "ENTER" the computer responds with " The System file cannot find the path specified" . PLEASE HELP!!
Windows is probably not on the X drive.
When i enter: ```bcdboot X:\Windows /l en-us /s h: /f ALL```, i get two errors:
BFSCV Error: Failed to set element application device. Status = [c00000bb]
BFSCV Error: Failed to populate BCD store. Status = [c00000bb]
Please help
when i type list partition then show to me there are no partition on this disk to show.what can i do?
same
I have a problem sir that when i start my comp. I see use our repair tool you file are missing
"Failure when attempting to copy boot files"
If you can kindly elaborate, I will do my best to assist.
@@MDTechVideos can you help us to figure it out, how to solve that?
Once you input the command to copy the boot files it states "Failure when attempting to copy boot files"
@@MDTechVideos Once you input the command to copy the boot files it states "Failure when attempting to copy boot files"
Does anyone has a solution for this? I have the same error after entering the c:\Windows /l en-us /s v: /f ALL (V is my assigned letter). Everything works perfect until I enter this command. It shows "Failure when attempting to copy boot files".
16:09 when enter the command "bcd boot c:\Windows /l en-us /s h: /f ALL" i got message "Failure when attempting to copy boot files" what did i do wrong? already follow all the steps
Did you find a solution to this my friend?
Zebuza no sir :(
I just encountered the same issue. I already have an H: drive, but I used L: for the new partition. I'm at a complete loss, would love some help from OP
I am trying right now and I mess with the boot record, at one point it didn't let me to fix it with the commands available since it said something about the drive is write protected, it seemed to work again after changing the active partion for my storage partition which is bigger, usually windows installation is put in a smaller partition. For me, a new install would work, other video already suggest formating the drive which in the case is only for system it wouldn't be much problem, but be careful of the encrypted keys certificates and other relevant information that is stored on c without another possibility like browsers user files they out user files in c always, like chrome, opera or Mozilla Firefox. Now the issue with the incorrect active partion has been fixed with the repair tool that puts the logo of windows. I was planning to make the active partition again manually but this seems to work.
After format fs=fat32 and waiting 3 hours I got
"Virtual disk service error: the volume size is too big". Any help what to do next?
Please elaborate.
MDTechVideos at the part of the video with the music and waiting my computer took a long time and it did not complete successfully. It said 0 percent completed. It said virtual disk service error: the volume size is too big.
How large is your hard drive?
MDTechVideos I think that primary one or largest number there said 689GB. Also it says raw. Maybe I need a video to change it. Does it have to be NTFS or something like that?
I had the same thing. The partition is 465 GB. What now??
when doing this one can simply format the hard disk without doing all these commands
When its locked you cant format it easily
HELP: Your "X:' says.. "x:\sources>" ----- from the start mine constantly says.. "x:\windows\system32>
..after the "FORMAT & DISKPART> exit" , nothing worked, saying:
(H: \EFI\ ) --- "FILE SYS UNRECOGNIZED" & next "ACCESS DENIED"
(PLeeZ RepLy..)
fast way to shell: SHIFT+F10
diskpart commant can be schorted to 3 letters
"create partition primary SIZE=1000" --> "cre par pri SIZE=1000"
switches cannot be shorted.
Give more context I just want to format the fckin thing but I can't enter windows
Hey bro, I got this message when I hit enter on "h:\EFI\Microsoft>bootrec /fixboot
This message: "The volume does not contain a recognized file system.
Please make sure that all required file system drivers are loaded and that the volume is not corrupted."
What should I do? Please help me up. Thanks
your hard drive is probably dead
At the command prompt
diskpart
list disk
select disk 0 (or whichever partition you want to use)
clean
convert GPT
exit
exit
Now Continue Windows install
@@Scott.Farkus dude thanks.. you saved me!
@@josephnichols4129 Glad it worked for you.
@@Scott.Farkus will i lose all my files if i do this?
After the command bcd c:\windows/l en-is /s H: /f all
I get the msg failure when attempting to copy boot files
What to do please solve this problem
If you can kindly elaborate, I will do my best to assist.
I got the partition is too large to format after waiting 3 hours to finish!
How big drive is it
i follow your steps in your video but i got Virtual Disk Service error Format is not allowed on the current boot system pagefile crashdump or hibernation volume . what should i do ?? Please help me ..
Did all that still have no continue at the end just goes back to troubleshooting and turn off pc
after typing h:/EFI/Microsoft bootrec /fixbooot it says "access is denied"
Nice music , while the disk was formatting ...
Thanks.
So I had 2 primary partitions.. one of them was a 20GB size and the other one was 910GB. I formatted the 20GB one, formatting the 1TB one. Is it ok? When I formatted the 20GB partition, it displayed an error and I had to watch the system event log but it still said operation completed successfully
At format it shows no volume selected ???
Should I stop when it says operation successfully completed
Directory of C: lists file folders, then X;\windows\system32>H now what?
I typed in bcdboot c:\Windows /l en-us /s h: /f all and I got Failure to copy files. Any solutions?
Will it affect my files or get deleted? I was hoping to get my files back.
Although this fixed the problem, where's my stuff... its gone, you never informed anyone that information needed to be backed up or would.d be lost in the process
2023 still not able to install windows from removable media
Its showing .. there are no fixed disks
Did u get solution to this ? Iam facing this issue
Plz guide
>bootrec /fixboot
Acess is denied
Please help
Failure when attempting to copy boot files
when i write format fs=fat32 it says
There is no volume selected.
Please select a volume and try again.
on windows 7
Hi, I hae the same issue, how did you solve it?
Do sel volume 4
will data be safe with this method?
Do u have an answer bro
Its gone forever
Followed everything but still have the same error.
Can you help me ou? It says no partition.
When i type list disk
It shows 'there are no fixed disks to show'
😭
Same error ? Did u solve that ? Kindly guide me plz
my bootfiles fail to copy at the last steps? why?
jmsmilin same
Same
anyone has solutions to this?
did u fix it akready??? how????
disk 0 invalid in diskpart help..
What if at the step format the msg is displayed
Virtual disk service error:
The volume size is too big
0 % completed
If you can kindly elaborate, I will do my best to assist.
Can this problem lead to bootmgr missing
Hey by formating will it deleate all my memory..
Tarun Singhal no
...and what if the HDD was formated NTFS previously (when windows was installed for the first time)? Format it FAT 32 anyway?
Yes
When i try to run CMD it asks for administrator password. What do i do?
I got to bootrec /fixboot and I got Access is denied. What steps can I take to correct that? Please help!
I got the same thing today. What was your solution? Thanks.
I am using a parallel desktop Window 8.1 Pro on my Mac Book Pro. I installed a Window 7 and Window 8. The window 7 is perfectly operating fine but the window 8.1 pro says no bootable device found. I tried your instructions until I got to the part where it says: DISKPART> list disk. I can't see any drive option there. Please help. Thank you very much!
If you can kindly elaborate, I will do my best to assist.
@@MDTechVideos Is it possible with you to assist and control my computer over online? If you could kindly please help me.
Thank you very much!
What is the name of music after minute 7?
Why do you need it?
How can i do this on dell core i3
Bootrec /fix boot said access denied
full format is a waste of time.
just delete and create partitions.
or wipe the full disk with "clean"
It’s says selected volume or partition is in use to continue with the operation use the OVERRIDE parameter.
What do I do plz help
I got the volume size is to big
I got the fckin same thing
I have a Win 7 Home Premium Lenovo Laptop. Will this tutorial help me?
Yes.
Thought this video would finally get me going, but it seems that the old Vista machine I am using to prepare the needed repair ISO is not allowing me to run the download/MediaCreationTool.exe . Error message says it is "not a valid win32 application. Thanks for posting this tutorial, I wish I could benefit from it.
Paul L. J
May god help you
Acce denied
Plz tell me what situation should I do???
But I'm trying ..👍👍
If you can kindly elaborate, I will do my best to assist.
wait.... how did u record this?
Magic!
Will my all files be fine by formatting partitions?
Gone.
@@MusicLyricsConverter WAT
Is this permanent?
Quite.
I hope it works, thanks.
You're welcome!
Dude I fucking love you. This shit was irritating me so fucking much
Your welcome!
Keep it simple
in 2021 it is unfortunately useless
excelent help.
You're welcome!
Lol it took too long for me it was like 900Gb
Ok....not unusual.
Haha Ur dumb its like 10 or 8 gb
lol i have almost 1 TB, started formating before 5-10 min and so far its on 7%
I have 1 TB aaand i cant even get it to work
L as in "library" 😂
Something that is underutilized in our ever changing world.
Mine is stuck on 16%
It says after i hit enter in the "format fs=fat32" it shows 0 percent then in below part "Diskpart has encountered an error: The parameter is incorrect. See the system event log for more info" how can i continue that? Thanks need help. 😭
Please elaborate.
MDTechVideos after i hit enter on 6:20 "diskpart has encountered an error"
Use fs=ntfs
Ty
You're welcome!
Fat32? Lol
Thank you bro
You're welcome!
TMI