Manufacturing of hho new design 9 plates versatile technically sound kit beautiful formation commercially viable for vary good production and performance.
Mulțumesc mult pentru videoclip foarte tare!Aș vrea să știu pentru un generator electric de 8kw de câte plăcuțe am nevoie plus minus și neutre să pot alimenta generatorul ?Mulțumesc mult!
Please stop trashing good videos with music, if I want to listen to music I'll choose a music video, and I'm sure I won't be searching crap music. Otherwise, I like your video, good work.
So the closer they are, the more amps equal, more gas. The bottom line is: the more amperage the more gas? Or do you know what’s the most efficient way to produce gas? What is the biggest thing to keep in mind? The distance of the plates between each other’s? The area covered by the plates in relation to the amount of whatever or the amperage/voltage? Or just the amperage?
buenas noches interesante tu proyecto me puedes dar las medidas de las laminas positivas y negativas y que acero inoxidable usaste por favor gracias y que calibre es por favor
AC generates Steam outright, as far as I understand and we need DC to seperate Hydrogen & Oxygen. Even with DC, with higher voltages, heat will be generated and material will be leeched too
Una consulta ? Se puede usar gruesor de 3 mm de acero y 3 mm en cada rondela para separarlas ?? Yo hice una con hojas de 0,75 mm y se calienta el positivo. A que se debe ? Si puede darme algun consejo te lo agradeceria Gracias de ante manos.
al cambiar el espacio de 2mm a 1mm la potencia se mantiene o con cual separación tiene mas fuerza con la de 2mm de separación o de 1mm de separación por favor
It is not worse, with a distance of 2 mm you consume 4 amps and with a distance of 1 mm you consume 8 amps, this also depends a little on the concentration of the electrolyte, each one as he wishes
great sir thank u i have petrol vehcle 1000 cc i want make plates for 40 percent saviving with petrol how i calculate palate size sir need youe advice thanks in advance
@@Inventive101 i knew it was not mashed potato flakes... lol. just have seen baking soda used also. some have said about overheating at higher amp draw? ive not built one yet.
The problem is not to make the GENERATOR itself ... but the electrolyte used. I tried caustic soda (Na 0H) dissolved in water. Electrode (stainless steel) - quickly "dissolves" (a few minutes) and the liquid becomes turbid and quickly turns into "mud" ...
you could have increased the amount of electrolyte in the water and this would have increased the amps with the 2mm gap, it takes very little electrolyte in the water with the 1mm gap to get good amps.
It can be done with a more concentrated electrolyte but you do not get the same results. I wanted to see the results with the same electrolyte but with different distances. Thanks for the advice
i read in the news that if u use 0.1mm stainless steel plate, it will reduce the power usage by a lot with the same LPM output. is it true? can u test it?
that was perfect If you pay attention, as the distance approaches, in addition to the increase in current consumption, the amount of gas production also increases! I have just one question, is it possible to combine another substance with water instead of potassium hydroxide?
I am working in see how much is the maximal critic presure to produce HHO safety. At moment I did experiments that shows that you can produce the two gasses H2 and O2 at 2,5 bar without problems. Keeping the electrolysis temperature atmosphere under 45 ºC. So HHO can leaves the generator container and be used with a flame arrestor for produce a nice flame torch for example. Did you work in this area? How much is maximal pressure that you use in the HHO generation? Regards and thanks for sharing your experience with the DIY comunity!
Hi You need to do a better experiment to get more valuable results. Make a 2mm gaped and a 1mm gaped generator that have the same number and configuration of plates, but with different size of plates so as they conduct the same current. I guess you need to make the 1mm gaped generator with half sized plates to get the same current as the 2mm gaped generator. then u need to accurately measure the amount of gas produced with your l/min gage. This experiment defines the more efficient design. I guess the 2mm design is more efficient, because it makes less dense gas bubbles between plates, and you have more usable area to conduct current and make gas. Also consider that smaller sized plates make more current leakage than bigger ones. To get a more accurate result from this experiment, you need to make dry cell generators. Good luck
Intrebarea mea este, grosimea placilor, ce rol are, am vazut ca distanta intre ele conteaza, adica distanta mica consum mare Ah, dar cantitatea de gas este mai mica sau mai mare?
Не вижу смысла подключать пару контактов на пластины . В электролизёре все пластины должны быть задействованы , всё зависит от количества подачи тока , мало тока мало пластин , много тока больше пластин . На такую колбу и с малым током можно было подключить всего две пластины и всё бы работало . Удачи .
Need neutral plates to bring down voltage down to 2 volts from 12. Any more than 2 volts is energy lost to heat. Need 7 plates for SIX SPACES. 12Volts÷6 spaces=2 volts per space between plates. Square cm of 1 plate per cell ÷0.084= Amperage. Need 10 amp for 4.0 litre engine, 15amp for 6 litre, etc.
I made another project but without nutral plates... And it was seven plates+ and seven - but the problem is when i connected it to 12 v battery the current was too high, 100 A and ir ruined the wires.. Can u explain to me why thats happened?
You need neutral boards, no matter how much battery power. Add two or three neutral plates to each other. The generator you made drew too much current, too many amps, adding neutral boards decreases its consumption.
THE VIDEO IS VERY GOOD. THE CELL IS EXCELLENT, BUT THERE IS SOMETHING I DO NOT UNDERSTAND. IF ONLY 3 PLATES HAVE CURRENT, WHAT ARE THE REST OF THE PLATES USED FOR IF THEY ARE NOT CONNECTED? I THINK IT WOULD BE MORE EFFICIENT IF ONE + AND ONE - ARE USED INTERMEDIATELY. //////////// EL VIDEO ESTA MUY BIEN. LA CELDA ES EXCELENTE, PERO HAY ALGO QUE NO ENTIENDO. SI SOLO TIENEN CORRIENTE 3 PLACAS, PARA QUE SE UTILIZAN EL RESTO DE PLACAS SI NO ESTAN CONECTADAS?? CREO QUE SERIA MAS EFICIENTE SI SE USAN INTERCALADAS UNA + Y UNA -.
Do not waste your time by asking as you can learn everything is in youtube if you want to build one! Also be very careful it can be very bed for your health or even life.
🤔🤔🤔🤔🤔🤔🥴الهيدروجين يطلع تمام بس الاوكسجين وين يروح ليش مو 2 منافذ للهواء هاي الخدعه و الكذبه الي لايمكن تغطيتها في جميع خلايا الهيدروجين خصوصا الخليه الجافه الي من اجزاىها كازكت واشر و شرائح ستالس
Why so much voltage across the plates Why 3 neutral between +/-.. It should be 6 neutral fir best efficient design .. Anything more than 18 to 2 volts is a water steamer
In the first part I have two 1 mm gaskets and in the second I have only one door. In a wet cell it works 1 mm quite well while in a dry cell it doesn't work very well
Hi friends, what do you think about this test?
He would have helped me when I was a beginner
Bravo
@@stefanpricop4717Thanks
Good test
@@spirugrigore5165 Cheers mate!
I’ve never thought that the space between plates could increase or decrease the amperage. Good job 👍
Thanks. Cheers mate
It also depends upon the caustic soda (sodium hydroxide) he adds..!!
@@sunnykapoor0000 Yes, but the idea is to have an electrolyte as little as possible.
@@sunnykapoor0000 In this video the same water was used for both tests
Lol
Excellence..
Share is caring
Thanks
Good experiment
thanks
Great explanation man. Thank you for your share.
Thanks, cheers mate
Good experiment!
Thanks
Very good work and cool looking brother
Thanks bro
👍👍👍👍
Excellent
Thanks
Manufacturing of hho new design 9 plates versatile technically sound kit beautiful formation commercially viable for vary good production and performance.
Gr8 video. I though better 2 negative and 1 positive
👍
Good one
Thanks 👍
Good job 👍
Thanks
Super Jop👍
Nice video. Thanks for sharing. What was your voltage? You only showed the current.
Excelente!
Thanks
very good
Thanks
The beast
Thanks
Qual a quantidade de soda cáustica, que coloco nessa copo do filtro, para rodar 100 Km.
Grato
great work
Mulțumesc mult pentru videoclip foarte tare!Aș vrea să știu pentru un generator electric de 8kw de câte plăcuțe am nevoie plus minus și neutre să pot alimenta generatorul ?Mulțumesc mult!
Good good good
😃 Thanks
Boa tarde gostei da informação 👍.
Cool
Thanks
Did u give 12v DC current
Please stop trashing good videos with music, if I want to listen to music I'll choose a music video, and I'm sure I won't be searching crap music. Otherwise, I like your video, good work.
Ottimo lavoro, complimenti.
Ma quanti litri al minuto produce ??? con 4amp e con 8amp.
Grazie
Grazie. Non l'ho misurato perché allora non avevo un insegnante, ma lo farò in futuro
Exelente felicidades
Muchísimas gracias
May I know what is the purpose to have more neutral plates compared to positive and minus?
This also increases the risk of a short circuit. Absolutely... don't forget to put a proper fuse in the power supply circuit!!!
So the closer they are, the more amps equal, more gas.
The bottom line is: the more amperage the more gas? Or do you know what’s the most efficient way to produce gas? What is the biggest thing to keep in mind? The distance of the plates between each other’s? The area covered by the plates in relation to the amount of whatever or the amperage/voltage? Or just the amperage?
Bravo
How about titanium plates? Good interesting work....
Titanium is very good but very expensive
buenas noches interesante tu proyecto me puedes dar las medidas de las laminas positivas y negativas y que acero inoxidable usaste por favor gracias y que calibre es por favor
Can tell if the production was the same using 2mm and 1mm separation, please? Thank you.
Thanks you sir
Welcome to my channel
Good working. Sir you check small genareter by this
Thanks
Thank you sir, Can one use AC current to generate hho
Thank you. I've never used it but it works. The best idea is to use a high voltage and few amps. 220V DC
AC generates Steam outright, as far as I understand and we need DC to seperate Hydrogen & Oxygen. Even with DC, with higher voltages, heat will be generated and material will be leeched too
You have not describe detailed about values holes in the jar and steel plate measurement. Is this ket is suitable for cars
Una consulta ? Se puede usar gruesor de 3 mm de acero y 3 mm en cada rondela para separarlas ??
Yo hice una con hojas de 0,75 mm y se calienta el positivo.
A que se debe ?
Si puede darme algun consejo te lo agradeceria
Gracias de ante manos.
Amigo usas las placas metálicas muy delgadas mínimo debe ser de 2 mm y la negativos en aluminio
Was it useful?
al cambiar el espacio de 2mm a 1mm la potencia se mantiene o con cual separación tiene mas fuerza con la de 2mm de separación o de 1mm de separación por favor
Good experience ❤️❤️👍👍👌👏 cool looking.
What a size are wosser to consume ampere different ? please send me your reply 🙏🙏
It is not worse, with a distance of 2 mm you consume 4 amps and with a distance of 1 mm you consume 8 amps, this also depends a little on the concentration of the electrolyte, each one as he wishes
@@Inventive101 🙏🙏🙏🙏🙏👍👍❤️❤️❤️❤️
@@hhogasproduction5081 👍👍👍
@@Inventive101 great vid,thnx a lot!!4 ampere current makes more hho than 8?or its the same?
great sir thank u i have petrol vehcle 1000 cc i want make plates for 40 percent saviving with petrol how i calculate palate size sir need youe advice thanks in advance
Wet cell or dry cell?
👍👍👍👍
Hit
Cool
Nice cell
@@julybom1854 Thanks 👍
se le puede instalar en un vehículo a gasolina y como de ejemplo para solicitarle una gracias soy de Ecuador
3:09 baking soda ?
nice expirement of plate distance 👍
It is potassium hydroxide, flakes
Thanks
@@Inventive101 i knew it was not mashed potato flakes... lol. just have seen baking soda used also. some have said about overheating at higher amp draw? ive not built one yet.
@@joeyjennings9548 It corrodes the material faster, thickens the electrolyte and from what I read it is harmful beking soda
The problem is not to make the GENERATOR itself ... but the electrolyte used.
I tried caustic soda (Na 0H) dissolved in water.
Electrode (stainless steel) - quickly "dissolves" (a few minutes) and the liquid becomes turbid and quickly turns into "mud" ...
I do same. Did you find solution
Sir please inform me
1_ this plate stenless steel or other metal plate
2_ this plate how much Gauge
3_ you are put the water caustic soda or what
Ideal space is said to be 2mm. But depends on amount of electrolytes and desired amperage!
And the number of plates
you could have increased the amount of electrolyte in the water and this would have increased the amps with the 2mm gap, it takes very little electrolyte in the water with the 1mm gap to get good amps.
It can be done with a more concentrated electrolyte but you do not get the same results. I wanted to see the results with the same electrolyte but with different distances. Thanks for the advice
i read in the news that if u use 0.1mm stainless steel plate, it will reduce the power usage by a lot with the same LPM output. is it true? can u test it?
👍
Πολύ ωραίο. Το δικό μου δυστυχώς ξεπερνάει τα 30 A
What is the best raport between : voltage - amps - frequency ?
that was perfect
If you pay attention, as the distance approaches, in addition to the increase in current consumption, the amount of gas production also increases!
I have just one question, is it possible to combine another substance with water instead of potassium hydroxide?
Yes but potassium is better and easy to get it is literally lye
Can go to Walmart and get it for 5 bucks
Pliss el frasco de tapa celeste artico .. me podrian decir como se llama su nombre..
Filtro de agua. Se utiliza para filtrar agua, lo puedes encontrar en hidráulica doméstica.
Filtro de agua. Se utiliza para filtrar agua, lo puedes encontrar en hidráulica doméstica.
why neutral plates???
and sea water works too?
I am working in see how much is the maximal critic presure to produce HHO safety.
At moment I did experiments that shows that you can produce the two gasses H2 and O2 at 2,5 bar without problems. Keeping the electrolysis temperature atmosphere under 45 ºC. So HHO can leaves the generator container and be used with a flame arrestor for produce a nice flame torch for example.
Did you work in this area? How much is maximal pressure that you use in the HHO generation?
Regards and thanks for sharing your experience with the DIY comunity!
I haven't done much experimentation on this. I think my generators can withstand up to 8-10 bar. I did not apply a pressure higher than 1.5 bar
Thanks fpr share this, what type metal dobyoubuse for the cells
Thanks. 316L stainless steel
because of the small distance, very well, but the voltage is too high and it pierces, hence the very high current.
Hey don't forget to like and subscribe
The current doubled from 4 to 8 did the production of hydrogen also doubled?
Yes, hydrogen production is also increasing, but it is not always more efficient, water can be heated ...
MUITO BOM +1 INSCRITO
Thanks
Are you using a PWM controller?
What’s the white powder?
Hi
You need to do a better experiment to get more valuable results. Make a 2mm gaped and a 1mm gaped generator that have the same number and configuration of plates, but with different size of plates so as they conduct the same current. I guess you need to make the 1mm gaped generator with half sized plates to get the same current as the 2mm gaped generator. then u need to accurately measure the amount of gas produced with your l/min gage. This experiment defines the more efficient design. I guess the 2mm design is more efficient, because it makes less dense gas bubbles between plates, and you have more usable area to conduct current and make gas. Also consider that smaller sized plates make more current leakage than bigger ones. To get a more accurate result from this experiment, you need to make dry cell generators.
Good luck
Intrebarea mea este, grosimea placilor, ce rol are, am vazut ca distanta intre ele conteaza, adica distanta mica consum mare Ah, dar cantitatea de gas este mai mica sau mai mare?
cantitatea de gaz este mai mare automat cu cresterea consumului de amperi.
Si grosimea placi creste aperaju?
@@kraiczarioan1255 nu cred ca, creste amperajul, este vorba doar de rezistența. 1 mm este perfect
wow
Will you try in a car? What the best generador for a ML 320 suv? As economizar?
I have it in my car.
I think you need 1-2 liters per minute
I have it in my car.
I think you need 1-2 liters per minute
Не вижу смысла подключать пару контактов на пластины . В электролизёре все пластины должны быть задействованы , всё зависит от количества подачи тока , мало тока мало пластин , много тока больше пластин . На такую колбу и с малым током можно было подключить всего две пластины и всё бы работало . Удачи .
Boa noite, excelente trabalho, qual a possibilidade de nós enviar o tamanho das pkacas6de aço, que o Sr usou
Desde já agradeço
That instrument is a pressure gauge? What measurements did you use for the steel plates?. Good work
But I have always wondered is why do you only excite 3 of the plates and not the remaining plates???
We also need neutral plates, it is a way to regulate the amperes
What mm you use in your first assemble
Are you using DC or AC power ?
Why it should use netral plates? How if All plates just plus and minus?
Need neutral plates to bring down voltage down to 2 volts from 12. Any more than 2 volts is energy lost to heat. Need 7 plates for SIX SPACES. 12Volts÷6 spaces=2 volts per space between plates. Square cm of 1 plate per cell ÷0.084= Amperage. Need 10 amp for 4.0 litre engine, 15amp for 6 litre, etc.
I made another project but without nutral plates... And it was seven plates+ and seven - but the problem is when i connected it to 12 v battery the current was too high, 100 A and ir ruined the wires.. Can u explain to me why thats happened?
You need neutral boards, no matter how much battery power. Add two or three neutral plates to each other. The generator you made drew too much current, too many amps, adding neutral boards decreases its consumption.
What is the white powder
Do you know the amount of hydrogen each method produces per minute? I would be really curious to know that as well.
Nice one from where i can buy such container thank you
They are commercially available, it is a water filter. Where are you from?
Hola buena noche amigo una pregunta puede hidrogeno mi carro como hacer porfavor
THE VIDEO IS VERY GOOD. THE CELL IS EXCELLENT, BUT THERE IS SOMETHING I DO NOT UNDERSTAND. IF ONLY 3 PLATES HAVE CURRENT, WHAT ARE THE REST OF THE PLATES USED FOR IF THEY ARE NOT CONNECTED? I THINK IT WOULD BE MORE EFFICIENT IF ONE + AND ONE - ARE USED INTERMEDIATELY. //////////// EL VIDEO ESTA MUY BIEN. LA CELDA ES EXCELENTE, PERO HAY ALGO QUE NO ENTIENDO. SI SOLO TIENEN CORRIENTE 3 PLACAS, PARA QUE SE UTILIZAN EL RESTO DE PLACAS SI NO ESTAN CONECTADAS?? CREO QUE SERIA MAS EFICIENTE SI SE USAN INTERCALADAS UNA + Y UNA -.
Las placas neutras también tienen corriente y producen gas, es un ajuste del amperaje mecánico
Hy friends..I want to know the size of stainless that you use, thanks👍
try these experiments with 2 to 2.5v and 5 to 10 amp you will be amazed by efficiency.
Goedenavond
Kan de auto over dit artikel lopen?
Hallo, ik begrijp niet echt wat je zei, ja misschien is de auto verbonden met hho
Can you make one that will run a car?
What is the thickness of the plates?
What are these types of containers called, and where can I find them?
Do not waste your time by asking as you can learn everything is in youtube if you want to build one! Also be very careful it can be very bed for your health or even life.
@@davidran9317 Must be a bot. The video poster is certainly an expert in this field to ask any kind of questions.
How much current u gave?
2 / 1 mm gaps differ ok 👌
Spacer ring plastik 1mm = 4A. Spacer ring 2mm = 8A.
Asalamualaikum bosku salm kenal
Are the two outside plates positive?
Yes
🤔🤔🤔🤔🤔🤔🥴الهيدروجين يطلع تمام بس الاوكسجين وين يروح ليش مو 2 منافذ للهواء هاي الخدعه و الكذبه الي لايمكن تغطيتها في جميع خلايا الهيدروجين خصوصا الخليه الجافه الي من اجزاىها كازكت واشر و شرائح ستالس
What water mixture do you use?
potassium hydroxide
the HHO generator exploded after switching off the fuel supply, i presume the HHO supply hose must have a protection to prevent the backfire
you mean after switching off the electricity?
Why so much voltage across the plates
Why 3 neutral between +/-..
It should be 6 neutral fir best efficient design ..
Anything more than 18 to 2 volts is a water steamer
More amp more buble?
Yes, but many amps are not always good
I NO SEE, WHEN IS 2MM. AND WHEN 1MM. THE TEST IS VERY INTRESTING. BUT, HOW IS BEST
In the first part I have two 1 mm gaskets and in the second I have only one door. In a wet cell it works 1 mm quite well while in a dry cell it doesn't work very well