NO NO NO that is the dumbest way to make Hydrogen. Objective is to disrupt the binding of the two molecules. You vibrate the water molecules at the correct frequency with the "B" field of a magnet. ( "B" field is the center of a magnet), do not Oscillate, "vibrate". you will get 1000 times the hydrogen output.
He would just need to place another jar where all materials collect, using the same method here, then out to his last jar for collection as he has done. Spark arrestor complete. Safety 1st!
100%true I hate seeing all these videos with none so join doe comes along builds one and hurts him self because they left that part out.. good call even have a bubbler back up
Using SS threaded rod and with alternating stack of large and small SS washers increased the surface area and reduced the number of chambers required for optimal output. Using lye as an electrolyte gave excellent results. Nicely done btw.
this is creating a mix of hydrogen and oxygen. (I believe it is called browns gas but correct me if I am wrong!) you need to collect the gas from the anodes and the cathodes separately using a divider to be able to get pure hydrogen and pure oxygen.
Personally I would add a few flash arrestors or one way valves in the hoses to protect the generator from exploding if a flame goes backwards through them.
It is a little bit safer by feeding the gas through water, as the water will most likely stop the flame from going backwards, if the hose is far enough from the top.
if you place a partial divider (from the lid down to the liquid level) between the anode and cathode and use two hoses from each jar, you will produce separate the oxygen and hydrogen
That's not Hydrogen but HHO (mixture of H2 and 1/2 O2). You should rename the title of your video by: « Making a Simple HHO Generator from Bolts » It will be more honest
Ya exactly.. im new to this but this is browns gas not Hydrogen. Newbies need to realize this. You need an anode n Cathy plus divider. Apparently the negative terminal will give u the Hydrogen. Dig deep frens. Hope this helps at least 1 human . Humanity Will Win x3
Very informative video as always, I’m always very happy when I see you uploaded a new video! I actually rebuild a few of your projects and they turned out very well!
It is not informative video, it is untruthful video. It is not hydrogen, it is brown's gas. Brown's gas is dangerous, it explodes very loudly from very small spark. Hydrogen instead burns mildly.
I have a question about the wiring, You just need to hook cables on the far end plates? how do the rest get the electricity? As you can see I have no idea about electrical circuits. Thanks.
ciekawe co dzialoby sie gdyby do stalowego cylindra wpompowac sam wodor bez tlenu, wlac troche wody dodac trocin uszczelnic i podgrzewac. mozliwe ze drewno, wodor i woda zaczelyby reagowac i moze cos w rodzaju palnej cieczy mogloby powstac. to moglby byc ciekawy odcinek. Pozdrawiam!
In indonesia we put the hose to motorcycle/car air filter when the motorcycle turn on it produce gas to air filter and can make the fuel consumtion less and more economical. *before you do it please use pure distillation water ,it will make the remaining calsium dust from the evaporation of water that is not pure distilled water.
Video would have more value if you can show the voltage used, amperage draw, measured volume in a given time, and any special circuit used. The best and most efficient this can be accomplished the more practical the use-case of this application can be. Meaning the least amount of electrical energy for a given amount of HHO generated. I've read in the past that playing with pulsed dc or with a given frequency and using the right anodic and cathodic material can provide optimum results. This would be a more valuable video. Anyone can hook up a battery as was done here but it's not sustainable or practical for most.
. Great design! It is identical to another process. It's called electroplating. This is when DC current is used to deposit a thin metal coating onto a dissimilar metal surface. This is not necessarily a bad thing but, over time, you will notice that the bolts that are connected to the negative terminal of your DC power source will begin to thin out and eventually disintegrate. This is because electricity, AKA moving electrons, have a negative charge and emanate from the negative terminal of any DC source, battery or mains powered, and migrate towards the positive terminal carrying metal ions from those negative going bolts with them and depositing said metal ions onto the positive going bolts. Even stainless steel is not immune to physics. It's just a little more resistant to the caustic effects of the potassium hydroxide. This trick won't restore damaged threads onto your bolts but one way to extend the life of your electrodes is to keep track of the running time of your unit. Then, at equal intervals, hours, days, weeks whatever, reverse the polarity of your power source. Being that your unit premixes the hydrogen and oxygen gases internally, you will not notice any change in it's function. If it isolated the two gases from each other, then the gas emanating from the vessels would also be reversed. Another way to extend electrode life. Potassium hydroxide is caustic. The alkali equivalent to the corrosiveness of acid. If you remove the electrodes from the solution when not in use and rinse them in plain water, this will stop any chemical reactions. If you buy 4 more plastic jars, you can use the extra lids to keep your electrolyte solution from evaporating. On a different note, being that the 2 gases are premixed within the HHO unit, itself, they are at the perfect fuel / air ratio for a very energetic explosion should a spark or flame source find it's way to the end of an open hose connected directly to the HHO generator. If this happens, it will travel, literally, in a flash like blasting "det cord" right back to those 4 caustic fluid filled grenades just bubbling away at making their own explosive. They will then be showering their maker with a nice, hot, caustic, blinding bath. In essence, literally biting the hands, (and face), that feeds them. As a service to your viewers, I would advise them to build a flash arrester for your unit AND USE IT!!! A simple flash arrestor can be built out of a plastic bottle. Gatorade or Powerade for example as they are very sturdy, 2 pieces of hose and some water. 1) Drill 2 holes in the top of the bottle cap the size of the hoses. 2) Pull a LONG HOSE through the cap to reach 3/4 of the way to the bottom of the bottle. 3) Pull a SHORT HOSE through the cap to reach only 1 to 2 inches inside. 4)Use silicone caulk to seal the hoses to the cap and let set to cure. 5) Fill the bottle 3/4 full of water. DO NOT cover the end of the SHORT HOSE with water inside the bottle. 6) Connect the LONG HOSE to the HHO vessel. 7) Use the SHORT HOSE as the gas source. As the HHO generator produces gas, it will travel through the LONG HOSE and bubble up through the water exiting the bottle through the SHORT HOSE. If a spark finds it's way to the end of the SHORT HOSE, the gas will only burn for whatever the length of this hose, into the flash arrestor and stop at the water's surface. You'll want to use a plastic bottle for the arrestor to allow for temporary expansion during an accidental detonation. A short "POP" in a plastic bottle may make it jump but the same "POP" in a glass bottle will make a bloody mess.
Great Video // This in series wiring config would be more voltage required for optimum output. Alt parallel connection would require less voltage and pull more current(Amps) which might be better because you can maintain 12V and add more batteries in parallel adding Ah. Since the current is the flow and not voltage. Also in series the system has a higher resistance from container to container. IE if used in automotive or RV application. Also I would make the tubes about 2 inches put the T's center nipple in 2 3 and 4 and run slightly bigger tubes from 1 to 2 to 3 to 4 the out down the center. plus add a fifth jar with only water for flash back protection. Just some thoughts. Also Agree with @Mark Durbin
Good points. But this design ignores *surface area and spacing* so completely thats its a disservice... this is strangely like a Joe cell which is for something else. I hope ppl get Wiseman's info before making something similar to this that will have too low a cap on its gas output to energy in ability
Also talking 'series', When using multiple cells, cell 1 hh/O output should be piped to the bottom of cell 2 through a fine screen to thin the electrolite (instead of multiple BIG bubbles). I also think there should be a separator. Do this through all cells in the system. Perhaps the last cell in the system will draw the least current by having higher numbers of free h & O bubbles.
Excellent, how large would one be to power a generator, or can this be stored for long periods of time, from an apparatus the size you have shown.? Cheers.
How much power does that draw for the Hydrogen you get? I'm thinking of designing a unit to use 5-10 kilowatt input and see how much H2 I can get per day
First time I built one I failed to add a flash arrestor and ignited it within a foot of my face, all I heard after the explosion was a ringing for a solid minute.
What happens when you mix oxygen with it answer it turns back to water 1 to 9 parts it's impossible to use on an engine it turns back to water before it hits the combustion chamber
For anyone wondering, it is safer to use drain cleaner than regular salt, because using salt (NaCl) will split into toxic chlorine gas during the electrolysis.
@@sunsetindigochild3798 it was about adding the chlorine in form of kitchen salt, if you don't do that, the chlorine concentration will be pretty low nonetheless.
I really like the idea of producing hydrogen , but has anyone really invented a design that produces a super efficient one ? I know in theory an OVER UNITY would be impossible . BURNING 🔥 STUFF is so NEANDERTHAL LIKE . why do we need to burn ? Like electronics made the vacuum tube obsolete why don't we make BURNING stuff obsolete 🙄🙄🙄
Good build i enjoyed this video. Just a though, but May be consider subjecting the electrolyte to external forces such as magnetism, or inside an electo magnetic field, ultra violet light, a vacume during opperation. There is a home scientist in Australia who is getting very interesting results with laser lights aimed directly into the electrolyte with out using toxic hydroxides. He is getting good returns too. Just a thought. Love your work.
When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance
Useless for hydrogen production alone as there is no separation of the two gasses produced from the breakdown of H2O into, guess what, hydrogen AND oxygen. No pressurization also which gives this system no practical use in a welding task as it is the same as atmsperic pressure same as the systems relation to elevation to sea level.
1) You produce a dangerous gaseous mixture of hydrogen and oxigen (the title is an half scam), so basically you built a bomb (static electricity, a spark, also the raising temperature of the electrolytic cell during the process can ignite it. 2) The plastic jars aren't gas proof, so the mix can come out. 3) During the process the temperature increases and the plastics change their shape. Provide a cooling system and a bigger distance between the jars. 4) Also some plastics don't resist to alkaline solution. 5) The pipe diameter is small and you need a safety valve for every container for avoiding high pressure explosion. 6) Do you remove the topper o the bottle at home? 7) Provide a gas trap to avoid flame return. 8) With pH 9 -10 the rods are corroded. 9) Use sodium hydroxide instead potassium hydroxide: it's cheaper. 10) You use strong alkaline compounds: wear gloves, safety glasses, and appropriate clothes. You are responsible for yourselves and who want replicate your project. 11) Definitely you have interesting project and a good manual approach, but you are silly, so you are dangerous.
Hi, I hope you are doing great. Thank you for your very easy to understand and very detailed DIY videos. I was wondering have you ever routed the hydrogen gas into an empty brand new propane tank and substituted the propane with hydrogen gas? I was wondering do you think that type of propane tank conversion project is possible and safe with your expertise in making DIY generators? I was wondering did you already take on that project? And if so, can you share the link to your video. In case you haven't tried it. Would you be willing to try it and make a video of the steps involved like you do? Thank you for your genuine contribution in educating people in this amazing area of DIY projects. Hope you prosper in your endeavors. Thanks, Kim
dont do this with a hho or combined output generator. only attempt this with a split output generator where you have a pure hydrogen pipe also before you attempt this get yourself a vacumm pump and see if the tank is airproof. then fill it a little with hydrogen and set the hydrogen that is in the tank a fire. this should use up all the oxygen currently in the tank. now it should be ready to filll and store long time
Good evening Maciej, I am writing to you from Venezuela and I find your video super interesting. It is possible to use hydrogen, for example, in a motorcycle as an alternative fuel. I would appreciate your response. If you make a video it would be great.
Very cool project, you should increase the surface area of the electrodes with flat inox surfaces intersected with one another: This will make your generator a lot more powerful , increasing by an important factor the production of gas. Also a double chamber bubbler (filter) would be optimal for protection of the main chambers, check bubbler on yt and google. Maybe you already know these things but better be the annoying kid than not saying anything. Good luck from Italy 😛
es un dispositivo bastante ineficiente , la electrolisis depende de la superficie de cracking en general laminas separadas x 2,5 mm , de inox 316L (antimagnetica) , y es fundamental un burbujeador antichispas....
Csc ⚖️ gets to paint a 4707 Rollbotz energy types city's selections for fewture works of art z 🌌 so ai&Ai is on shelf's lol 12&24 hours she counts the mins!
When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance
Although it's cool and really does work, it's not a bew idea. I built one over 15 years ago. I've ran a lawn mower off the HHO with no problems. Some of y'all been hitting the lefthand cigarettes too much with your technobabble
I have enough to watch "the same thing"... For add something "new", for exemple, you could mesure the quantity of hydrogen in your bubbler (when it's closed), and show if yes or no, this process can produce a hydrogenated water, cheeper than special bottles making that, when most of them are a fake... Next, it can be interesting to make a generator separating hydrogen of oxygen gaz, and burn the oxygen not mixed in commun gaz, to heat a thermo resistant bricks inside an apartment... so you can (or not) have both : heat system and hydrogen water in the same time... Making an explosive gaz outside, it helps noone... and have no big sence...thank's
Do you know because of this method of system of boilers for quick hot water for shaving with house suply 220 volts in the bathrooms explosion have happend ? So many that this type of boilers was banded by law .!! Because at the same time you are produsing oxigen as well . Do not forget that acumelation of oxigen and hydrogen cause explosion .😍👌💯
It's not very useful unless you separate the gases right now you have oxygen and hydrogen combination which is dangerous. If you can separate the gas the hydrogen would be more useful.
@@enemyspider87 There is chromium in stainless steel. The electrolytic process that allows the production of hho gas also typically corrodes the surface of the stainless anode releasing chromium 6 into the water. Hexavalent chromium (chromium 6) can damage vision, cause irritation in the nose and throat, produce skin ulcers and cause cancer.
@@enemyspider87 stainless steel is typically used in these devices because it corrodes less than other conductive metals but it does corrode in this environment. And when it does, it releases chromium 6.
I have a piece of stainless I'm going to chop up and see how much H it will produce. It's 6x36, not sure yet what the best way to divide it is yet but working on it.
but it is not only hydrogen but also mixture of hydrogen and oxygen. It would be better if you had used two separate tank to collect hydrogen and oxygen. Anyway the video is too good :)
Physics dictates that it takes more energy to separate HO2 with electrolysis than the energy available by burning hydrogen and/or oxygen. Thus my earlier question.
How about a HHO generator for a Coleman Campstove, or a "Mr. Heater" space heater. I'm sure i could find something that's done that but for a short search no seeing any luck plus you are good at showing how to's
I used old time tooth cleaning powder for electrolyte , it builds up on the electrodes to protect them . Mine was made with bike spokes & rubber bands in plastic pipe . It would generate by just being in the sun .
How can the two center containers work and weren't hooked to electric wires it looks to me. The plates were separate. And one end was hooked to a positive wire and the other end hooked to a negative and they were completely separate. I thought a neg and pos have to come together in the same container to make hydrogen. ???? Did an oil company put you up to this to cause confusion? Somebody explain....
all of those have too much non contact area so much water space! you should fill the entire jars with discs spaced exactly .5mm apart alternating disc - + - + -+ -+
Your rides are too far apart do make a whole lot more gas if they were in within like maybe another twenty-five or thirty thousand form each other got to make them real close to put out more gas and it'll work more efficiency all that dog won't work you did donut impressive-looking thing is good but you could do it a whole lot better Zahra Zahra close together
How can this work when the 2 smaller plates are connected at each end and there in separate bottles. The 3 larger plates are not connected to anything.
Es braucht zu viel Strom im verhältnis. Dein Knallgas generator kann Wasserstoff und Sauerstoff nicht trennen. (explosionsgefahr) Die Elektroden haben zu wenig oberfläche und lösen sich in der Elektrolüse zu schnell auf. (wartungsintensiv) Dennoch ein cooles experiment.
Generalnie to fajny i prosty temat do zrobienia, ale. Do czego to wykorzystać i jak ( ja np: miałem w golfie 3 jako dodatek do powietrza zrobiony na przekazniku i drugim przycisku podgrzewania tylnej szyby użyłem tego 3razy bo miałem źle dopasowany ( moze za dużo)chlorek potasu i palił mi przekaznik. To było z 15 lat temu mam ten swój generator do dzis zakopany w szpejach garazowych
thanks fo sharing such a great video. How much hydrogen produced from each kg of water? can we also used seawater becuase world is already shortage of fresh water.
That's good for a basic demo however a single coil electrolyzer only produces Orthogydrogen which is volatile and burns hot causing embrittlement in aluminum block engines (if you're thinking of supplementing your fuel efficiency). You need to build a reactor that has dual coils at right angles to produce both Orthohydrogen and Parahydrogen (burns slower and steadier, and balances the combustion behavior of the Orthohydrogen in the electrolyzer/reactor). Otherwise you have to treat your aluminum block engine with a heat treatment like Ceramizer so you don't pit your cylinder walls or burn through your head gasket. Then the issue of what electrolyte to use.... if you use potassium hydroxide (lye), then you create toxic sludge that has to be flushed from the reactor every so often. I tried, but creating an organic electrolyte costs big $$, more than I had in my R&D budget.... still... it's a fun experiment, and that guy who created the HHO welder version did an impressive job. Good Stuff! 😎👍
Aluminum block engines must have iron sleeves, maybe you are referring to aluminum heads? I think HHO maybe a viable solution for 2-stroke or even rotary engines though.. Haven't given it much thought. ¯\_(ツ)_/¯
Good information and I'll have to read more about it. Hydrogen embrittlement makes sense, didn't know about Orthohydrogen and Parahydrogen, only HHO. Very interesting!!!
When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance
@@vincecox8376 you still have to generate a BALANCED blend of Orthohydrogen and Parahydrogen gasses.. otherwise you end up with engine embrittlement (on aluminum heads & gaskets... then you still have to deal with creating a biodegradable organic electrolyte... NO MATTER HOW MUCH VOLUME YOU GENERATE...
Look up pistol shrimp... Yes shrimp. It is one of the most fascinating creatures on this planet. Also do some research on The different types of helium isotopes (how they behave in respect to hydrogen and The changes in properties and structure under different environmental influences such as temperature, light, and pressure, etc...), magnetic fields, and the semiconductors gallandium and Indium tin oxide (paying close attention to their electrical qualities when in a gas form) also when doing this don't limit yourself to only collecting energy from one source. Think hybrid in which electrical energy is taken from multiple, cooperative and agreeing materials. Perhaps you can rid yourself of decay waste through some kind of evaporation process in which materials can be re-harvested and reintroduced to be used a second time. Allowing less waste and a higher efficiency?... We talk about collecting electrical energy from nature but I don't think anybody ever stops and looks at how nature does it, because she does it very well, with minimal waste. She shows us how through some of her magnificent creatures. Maybe look into using hi/lo crossovers to introduce a sound wave to the hydrogen? I'm willing to bet there is a frequency you could produce that will create a vibration which might move the hydrogen particles fast enough to create a vacuum I mean who doesn't like a system in their car and how awesome would it be if your music powered your car? Double whammy passing the sound wave through the water would muffle it so we wouldn't need those stupid little trunk dampers! just use your hydro-generator. Okay so now I'm getting into jokes but I really want to ask somebody "how many miles per song will your car do?" 🤣 Do you think in this hypothetical situation that the genre of music you listen to would affect your fuel efficiency and mileage? Now keep that mental picture and makes it with people's already really shitty driving and go 😂😂 Anyway evaporation process is probably your friend in all this too because in reality the fuel that runs your car is only flammable in a gaseous state. All right anyway I've said too much and you probably stopped reading a long time ago as my boyfriend says with his caring sidebar 🤣🤪 You probably didn't have as much fun reading this as I had writing it. But if you want to talk about it some more just go on a forum and ask all the physics and quantum mechanics majors. You might have to remind them to speak more clearly and slowly if you're not into the whole quantum physics jargon.
Let me share a few facts, I've been a Ham operator since 1959 as a general class operator I designed and built all my equipment (the TUBE days'). You have a good understanding of inductance!! I agree with all your findings. BUT!!! I want to expose something you can get into and it's going to blow your mind. JUST LIKE TESLA SAID look for things you can't see!! So, let me introduce you to what I refer to as the "B" field., I'm sure you know that there are three elements to any AC or Radio wave traversing space The oscilloscope only shows the two base elements, the positive and negative parts of any radio signal "BUTT!! The fact is it's the centerfield of a magnet that pushes the signal out whether it be AC current or a radio signal same thing!! Her's what I want you to learn: the centerfield of a magnet is by far the most powerful!! FACT! I refer to it as the "B" field, for a good reason it's much more complicated, Here's just a few facts: #1. If you tap the centerfield of a magnet (IE: the "B" Field) on any none Metalica item, it will lose weight. #2. If you tap the centerfield near a trickle of water, it will repel the water!! #3. If you vibrate the center field into a granite rock it will not only lose weight but also be very workable, what basically happens at the correct frequency the Quarts in the rock will reorganize. #4. The center field of a magnet is multi-dimensional. Once you start to see what's going on
NO NO NO that is the dumbest way to make Hydrogen. Objective is to disrupt the binding of the two molecules. You vibrate the water molecules at the correct frequency with the "B" field of a magnet. ( "B" field is the center of a magnet), do not Oscillate, "vibrate". you will get 1000 times the hydrogen output.
Excellent workmanship and an interesting project.
Thats very good simple HHO generator 👍👍
LOVE YOU PEOPLE KEEP UP THE GREAT WORK !!!
Can you power a motor ?
Do prądu podłączone są tylko dwa ostatnie sloiki?
awesome thank you.
Pls can you also use AC as an alternative power source?
PLEASE put flashback arrestors on this so it isn't a bomb
He would just need to place another jar where all materials collect, using the same method here, then out to his last jar for collection as he has done. Spark arrestor complete. Safety 1st!
That’s what the water is for 😂
Booooooring
100%true I hate seeing all these videos with none so join doe comes along builds one and hurts him self because they left that part out.. good call even have a bubbler back up
@@bob7500❤😮 BB
Using SS threaded rod and with alternating stack of large and small SS washers increased the surface area and reduced the number of chambers required for optimal output. Using lye as an electrolyte gave excellent results. Nicely done btw.
whats is lye as an electrolyte?
How did the sodium hydroxide perform versus the potassium ?
it also puts chromium 6 in the water tho
@@spaides5121 it is in the water
folks, this is a Brownian generator. learn more about Yule Brown's inventions and remember that this man led the way.
this is creating a mix of hydrogen and oxygen. (I believe it is called browns gas but correct me if I am wrong!) you need to collect the gas from the anodes and the cathodes separately using a divider to be able to get pure hydrogen and pure oxygen.
I have never seen any1 using this energy to do smthng like cooking or something useful
IT'S NOT A SIMPLE HYDROGEN GENERATOR
Super projekt, bardzo prosty a za razem bardzo wydajny...
This shows you don't understand physics or science or logic
te nauki ścisłe na chuj się nadają...@@maxwellAnderson-art
Personally I would add a few flash arrestors or one way valves in the hoses to protect the generator from exploding if a flame goes backwards through them.
Yeah, with this setup it's more like "Making a Simple Hydrogen Generator Bomb".
It is a little bit safer by feeding the gas through water, as the water will most likely stop the flame from going backwards, if the hose is far enough from the top.
@@Fire90475 yeah, but having to run it through water to use it is annoying. The best use for an HHO gen is a torch imo and water wont cut it there.
@@yeetmcmeat true
Good point. Do you have any ideas on how to make a flash back arrest?
if you place a partial divider (from the lid down to the liquid level) between the anode and cathode and use two hoses from each jar, you will produce separate the oxygen and hydrogen
Could also add a water inlet to make filling easier.
That‘s what I thought as well! Filling valves and separate gas collectors would have been the next level!
By sepration of oxigen and hydrogen then explosion will not happen dangersly .😍👌
Couldn't you just separate the anode and cathode into different jars and connect them via a middle wire ?
@@juaffle works way better with a connected body of water.
Hello
Is it possible to measure how much gas output from your reactor is?
That's not Hydrogen but HHO (mixture of H2 and 1/2 O2).
You should rename the title of your video by:
« Making a Simple HHO Generator from Bolts »
It will be more honest
Ya exactly.. im new to this but this is browns gas not Hydrogen. Newbies need to realize this. You need an anode n Cathy plus divider. Apparently the negative terminal will give u the Hydrogen. Dig deep frens. Hope this helps at least 1 human . Humanity Will Win x3
Very informative video as always, I’m always very happy when I see you uploaded a new video!
I actually rebuild a few of your projects and they turned out very well!
Thanks!
It is not informative video, it is untruthful video. It is not hydrogen, it is brown's gas. Brown's gas is dangerous, it explodes very loudly from very small spark. Hydrogen instead burns mildly.
Please I need some of the materials so I can do this and use it to light a bulb
how long will that mixture last and how much hydrogen will you get out from those four bottles
@@nirvaansinghtheartist It does not produce hydrogen, it produces dangerous and explosive brown's gas.
Do u need to ever change the water or add more drain cleaner?
What is the efficiency? How many liters per minute of HHO from what current at what voltage ?
Good ?? !
I have a question about the wiring, You just need to hook cables on the far end plates? how do the rest get the electricity? As you can see I have no idea about electrical circuits. Thanks.
a great application of chemistry, top notch creativity, thank you for sharing it
You have two plus and two minus in the jars on the outside, the upper terminals do not have continuity, how did you do it?
The water carries the voltage to each jar.
Nice project, but efficiency is less than 50%, maybe you try Proton exchange membrane, eff. up to 70%
ciekawe co dzialoby sie gdyby do stalowego cylindra wpompowac sam wodor bez tlenu, wlac troche wody dodac trocin uszczelnic i podgrzewac. mozliwe ze drewno, wodor i woda zaczelyby reagowac i moze cos w rodzaju palnej cieczy mogloby powstac. to moglby byc ciekawy odcinek. Pozdrawiam!
Seria magnifico que lo hagas en un automobil para que ya no use gasolina. Saludos
In indonesia we put the hose to motorcycle/car air filter when the motorcycle turn on it produce gas to air filter and can make the fuel consumtion less and more economical.
*before you do it please use pure distillation water ,it will make the remaining calsium dust from the evaporation of water that is not pure distilled water.
Love this!! Pete McMannus did this first thing of my first chemistry lesson and I’ve been hooked ever since!!
Video would have more value if you can show the voltage used, amperage draw, measured volume in a given time, and any special circuit used. The best and most efficient this can be accomplished the more practical the use-case of this application can be. Meaning the least amount of electrical energy for a given amount of HHO generated. I've read in the past that playing with pulsed dc or with a given frequency and using the right anodic and cathodic material can provide optimum results. This would be a more valuable video. Anyone can hook up a battery as was done here but it's not sustainable or practical for most.
.
Great design! It is identical to another process. It's called electroplating. This is when DC current is used to deposit a thin metal coating onto a dissimilar metal surface. This is not necessarily a bad thing but, over time, you will notice that the bolts that are connected to the negative terminal of your DC power source will begin to thin out and eventually disintegrate.
This is because electricity, AKA moving electrons, have a negative charge and emanate from the negative terminal of any DC source, battery or mains powered, and migrate towards the positive terminal carrying metal ions from those negative going bolts with them and depositing said metal ions onto the positive going bolts. Even stainless steel is not immune to physics. It's just a little more resistant to the caustic effects of the potassium hydroxide.
This trick won't restore damaged threads onto your bolts but one way to extend the life of your electrodes is to keep track of the running time of your unit. Then, at equal intervals, hours, days, weeks whatever, reverse the polarity of your power source. Being that your unit premixes the hydrogen and oxygen gases internally, you will not notice any change in it's function. If it isolated the two gases from each other, then the gas emanating from the vessels would also be reversed.
Another way to extend electrode life. Potassium hydroxide is caustic. The alkali equivalent to the corrosiveness of acid. If you remove the electrodes from the solution when not in use and rinse them in plain water, this will stop any chemical reactions. If you buy 4 more plastic jars, you can use the extra lids to keep your electrolyte solution from evaporating.
On a different note, being that the 2 gases are premixed within the HHO unit, itself, they are at the perfect fuel / air ratio for a very energetic explosion should a spark or flame source find it's way to the end of an open hose connected directly to the HHO generator. If this happens, it will travel, literally, in a flash like blasting "det cord" right back to those 4 caustic fluid filled grenades just bubbling away at making their own explosive. They will then be showering their maker with a nice, hot, caustic, blinding bath. In essence, literally biting the hands, (and face), that feeds them.
As a service to your viewers, I would advise them to build a flash arrester for your unit AND USE IT!!! A simple flash arrestor can be built out of a plastic bottle. Gatorade or Powerade for example as they are very sturdy, 2 pieces of hose and some water.
1) Drill 2 holes in the top of the bottle cap the size of the hoses.
2) Pull a LONG HOSE through the cap to reach 3/4 of the way to the bottom of the bottle.
3) Pull a SHORT HOSE through the cap to reach only 1 to 2 inches inside.
4)Use silicone caulk to seal the hoses to the cap and let set to cure.
5) Fill the bottle 3/4 full of water. DO NOT cover the end of the SHORT HOSE with water inside the bottle.
6) Connect the LONG HOSE to the HHO vessel.
7) Use the SHORT HOSE as the gas source.
As the HHO generator produces gas, it will travel through the LONG HOSE and bubble up through the water exiting the bottle through the SHORT HOSE. If a spark finds it's way to the end of the SHORT HOSE, the gas will only burn for whatever the length of this hose, into the flash arrestor and stop at the water's surface. You'll want to use a plastic bottle for the arrestor to allow for temporary expansion during an accidental detonation. A short "POP" in a plastic bottle may make it jump but the same "POP" in a glass bottle will make a bloody mess.
Great Video // This in series wiring config would be more voltage required for optimum output. Alt parallel connection would require less voltage and pull more current(Amps) which might be better because you can maintain 12V and add more batteries in parallel adding Ah. Since the current is the flow and not voltage. Also in series the system has a higher resistance from container to container. IE if used in automotive or RV application. Also I would make the tubes about 2 inches put the T's center nipple in 2 3 and 4 and run slightly bigger tubes from 1 to 2 to 3 to 4 the out down the center. plus add a fifth jar with only water for flash back protection. Just some thoughts. Also Agree with @Mark Durbin
Good points. But this design ignores *surface area and spacing* so completely thats its a disservice... this is strangely like a Joe cell which is for something else. I hope ppl get Wiseman's info before making something similar to this that will have too low a cap on its gas output to energy in ability
@@ronmartin7253 agree
Also talking 'series', When using multiple cells, cell 1 hh/O output should be piped to the bottom of cell 2 through a fine screen to thin the electrolite (instead of multiple BIG bubbles). I also think there should be a separator.
Do this through all cells in the system. Perhaps the last cell in the system will draw the least current by having higher numbers of free h & O bubbles.
Good video please what kind of plastic is it?
I'm not understanding your wiring.
Well not only hydrogen, its HHO which is even better to have pure Oxygen to fuel the boom
Excellent, how large would one be to power a generator, or can this be stored for long periods of time, from an apparatus the size you have shown.? Cheers.
I believe this setup can power a generator
How much power does that draw for the Hydrogen you get? I'm thinking of designing a unit to use 5-10 kilowatt input and see how much H2 I can get per day
First time I built one I failed to add a flash arrestor and ignited it within a foot of my face, all I heard after the explosion was a ringing for a solid minute.
Macieju jaka jest wydajność takiego generatora HHO?
Put a flashback arrestor if you don't want the whole thing to blow up.
What happens when you mix oxygen with it answer it turns back to water 1 to 9 parts it's impossible to use on an engine it turns back to water before it hits the combustion chamber
For anyone wondering, it is safer to use drain cleaner than regular salt, because using salt (NaCl) will split into toxic chlorine gas during the electrolysis.
Can you not use distilled water to take the chlorine out. ? As well as drain cleaning salt
@@sunsetindigochild3798 it was about adding the chlorine in form of kitchen salt, if you don't do that, the chlorine concentration will be pretty low nonetheless.
koh potassium hydroxide at 15% by weight in pure distilled water say 600grms to one later water
use 316 stainless rod and hardware, attach unit to vacuum side,3% is all u need .
Speaking of toxic, you’ll need to deoxidize the chromium in solution so you’re not dumping out hazardous waste when done.
I wonder if he could improve his designs with graphite plates and using a 30% urea solution.
Also maybe make it solar powered?
Its all about surface area. Bolts are not the best choice
I really like the idea of producing hydrogen , but has anyone really invented a design that produces a super efficient one ? I know in theory an OVER UNITY would be impossible . BURNING 🔥 STUFF is so NEANDERTHAL LIKE . why do we need to burn ? Like electronics made the vacuum tube obsolete why don't we make BURNING stuff obsolete 🙄🙄🙄
Fantastic and simply made. Now how will we use the gas? Thank you very much!
Good build i enjoyed this video. Just a though, but May be consider subjecting the electrolyte to external forces such as magnetism, or inside an electo magnetic field, ultra violet light, a vacume during opperation. There is a home scientist in Australia who is getting very interesting results with laser lights aimed directly into the electrolyte with out using toxic hydroxides. He is getting good returns too. Just a thought. Love your work.
When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance
Useless for hydrogen production alone as there is no separation of the two gasses produced from the breakdown of H2O into, guess what, hydrogen AND oxygen. No pressurization also which gives this system no practical use in a welding task as it is the same as atmsperic pressure same as the systems relation to elevation to sea level.
1) You produce a dangerous gaseous mixture of hydrogen and oxigen (the title is an half scam), so basically you built a bomb (static electricity, a spark, also the raising temperature of the electrolytic cell during the process can ignite it.
2) The plastic jars aren't gas proof, so the mix can come out.
3) During the process the temperature increases and the plastics change their shape. Provide a cooling system and a bigger distance between the jars.
4) Also some plastics don't resist to alkaline solution.
5) The pipe diameter is small and you need a safety valve for every container for avoiding high pressure explosion.
6) Do you remove the topper o the bottle at home?
7) Provide a gas trap to avoid flame return.
8) With pH 9 -10 the rods are corroded.
9) Use sodium hydroxide instead potassium hydroxide: it's cheaper.
10) You use strong alkaline compounds: wear gloves, safety glasses, and appropriate clothes. You are responsible for yourselves and who want replicate your project.
11) Definitely you have interesting project and a good manual approach, but you are silly, so you are dangerous.
Hi, I hope you are doing great. Thank you for your very easy to understand and very detailed DIY videos.
I was wondering have you ever routed the hydrogen gas into an empty brand new propane tank and substituted the propane with hydrogen gas? I was wondering do you think that type of propane tank conversion project is possible and safe with your expertise in making DIY generators? I was wondering did you already take on that project? And if so, can you share the link to your video. In case you haven't tried it. Would you be willing to try it and make a video of the steps involved like you do? Thank you for your genuine contribution in educating people in this amazing area of DIY projects. Hope you prosper in your endeavors. Thanks, Kim
dont do this with a hho or combined output generator. only attempt this with a split output generator where you have a pure hydrogen pipe
also before you attempt this get yourself a vacumm pump and see if the tank is airproof. then fill it a little with hydrogen and set the hydrogen that is in the tank a fire. this should use up all the oxygen currently in the tank. now it should be ready to filll and store long time
Sounds like this would torpedo that tank..lol
@@eugenethompson1903 I have no idea what the terminology means PLS explain
Dzień dobry. Jakie napięcie jest podłączone do tej wytwornicy i jak często trzeba wymieniać wodę i elektrody ? :)
Good evening Maciej, I am writing to you from Venezuela and I find your video super interesting. It is possible to use hydrogen, for example, in a motorcycle as an alternative fuel. I would appreciate your response. If you make a video it would be great.
You should mention to not ever store this Gas mixture.
Very cool project, you should increase the surface area of the electrodes with flat inox surfaces intersected with one another: This will make your generator a lot more powerful , increasing by an important factor the production of gas.
Also a double chamber bubbler (filter) would be optimal for protection of the main chambers, check bubbler on yt and google. Maybe you already know these things but better be the annoying kid than not saying anything. Good luck from Italy 😛
es un dispositivo bastante
ineficiente , la electrolisis depende de la superficie de cracking en general laminas separadas x 2,5 mm , de inox 316L (antimagnetica) , y es fundamental un burbujeador antichispas....
Csc ⚖️ gets to paint a 4707 Rollbotz energy types city's selections for fewture works of art z 🌌 so ai&Ai is on shelf's lol 12&24 hours she counts the mins!
Does the electrolyte leave a coating on the electrodes? I'm curious. Love this design
It's corrosive. It'll eat the electrodes over time.
When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance
Although it's cool and really does work, it's not a bew idea. I built one over 15 years ago. I've ran a lawn mower off the HHO with no problems. Some of y'all been hitting the lefthand cigarettes too much with your technobabble
I have enough to watch "the same thing"... For add something "new", for exemple, you could mesure the quantity of hydrogen in your bubbler (when it's closed), and show if yes or no, this process can produce a hydrogenated water, cheeper than special bottles making that, when most of them are a fake... Next, it can be interesting to make a generator separating hydrogen of oxygen gaz, and burn the oxygen not mixed in commun gaz, to heat a thermo resistant bricks inside an apartment... so you can (or not) have both : heat system and hydrogen water in the same time... Making an explosive gaz outside, it helps noone... and have no big sence...thank's
Do you know because of this method of system of boilers for quick hot water for shaving with house suply 220 volts in the bathrooms explosion have happend ? So many that this type of boilers was banded by law .!! Because at the same time you are produsing oxigen as well . Do not forget that acumelation of oxigen and hydrogen cause explosion .😍👌💯
It's not very useful unless you separate the gases right now you have oxygen and hydrogen combination which is dangerous. If you can separate the gas the hydrogen would be more useful.
My project will be a small Zepplen.
Just so you know, there is a good possibility you are also making hexavalent chromium in the water.
What that?
@@enemyspider87 There is chromium in stainless steel. The electrolytic process that allows the production of hho gas also typically corrodes the surface of the stainless anode releasing chromium 6 into the water. Hexavalent chromium (chromium 6) can damage vision, cause irritation in the nose and throat, produce skin ulcers and cause cancer.
@@enemyspider87 stainless steel is typically used in these devices because it corrodes less than other conductive metals but it does corrode in this environment. And when it does, it releases chromium 6.
@@jimk8520 wow i didn't know that. Thank you for informing me!
@@enemyspider87 Welcome.
I have a piece of stainless I'm going to chop up and see how much H it will produce. It's 6x36, not sure yet what the best way to divide it is yet but working on it.
but it is not only hydrogen but also mixture of hydrogen and oxygen. It would be better if you had used two separate tank to collect hydrogen and oxygen. Anyway the video is too good :)
You can use cigarette filter as flashback arrester because HHO can ignite without a spark inside the tube. This makes a nice mini torch 🔥
Physics dictates that it takes more energy to separate HO2 with electrolysis than the energy available by burning hydrogen and/or oxygen. Thus my earlier question.
How about a HHO generator for a Coleman Campstove, or a "Mr. Heater" space heater. I'm sure i could find something that's done that but for a short search no seeing any luck plus you are good at showing how to's
Would be super useful like that.
I used old time tooth cleaning powder for electrolyte , it builds up on the electrodes to protect them . Mine was made with bike spokes & rubber bands in plastic pipe . It would generate by just being in the sun .
Very cool
How can the two center containers work and weren't hooked to electric wires it looks to me. The plates were separate. And one end was hooked to a positive wire and the other end hooked to a negative and they were completely separate. I thought a neg and pos have to come together in the same container to make hydrogen. ???? Did an oil company put you up to this to cause confusion? Somebody explain....
just use salt ffs potassium hydroxide is expensive, that small bottle 15 to 20 on amazon. epson salt down the street 3 bucks for a pound loool
all of those have too much non contact area so much water space! you should fill the entire jars with discs spaced exactly .5mm apart alternating disc - + - + -+ -+
Please where can we buy this product? Just for thesis purposes only. Hoping for fast response. Thank you!
Have you ever read about something called the Energy Conservation Principle?
Your rides are too far apart do make a whole lot more gas if they were in within like maybe another twenty-five or thirty thousand form each other got to make them real close to put out more gas and it'll work more efficiency all that dog won't work you did donut impressive-looking thing is good but you could do it a whole lot better Zahra Zahra close together
But you have to transforme the hydrogen into a liquid for using it in cooking for example how.
W/e u have to put threaded rod in a vice, run the nuts on it. Lock a few together, then clamp the vice on the nuts.
No more crushed thread's
Cool project. good video!
HHO is a very explosive gas, anyone whos planing to make something like this i recommend not to store the gas as it is very dangerous.
Can someone explain to me how the power is evenly distributed? Why series instead of parallel?
can we use this gas for cooking foods in Gas stove? Is it safe for use in Gas stove? I think it is explosive material....
The inventer was killed to keep it a secret. Type in run your car on water you will see what this will do this was his work.
How can this work when the 2 smaller plates are connected at each end and there in separate bottles. The 3 larger plates are not connected to anything.
That amount of gas wouldn't be enough HHO to assist my brush cutter...
Es braucht zu viel Strom im verhältnis.
Dein Knallgas generator kann Wasserstoff und Sauerstoff nicht trennen. (explosionsgefahr)
Die Elektroden haben zu wenig oberfläche und lösen sich in der Elektrolüse zu schnell auf. (wartungsintensiv)
Dennoch ein cooles experiment.
I would put 12v on each bottle not in series because you loose current that way and will get more H2
Would it have been better to fill the bolts with washers that were very close together to make more metal surface area?
Do not store hho gas, alway make it fresh before any application and use it immediately
E um dos mais prático e funcional será que.
Consegue movimentar uma moto testa aí amigo
What inverter and power wattage are you using? Can we see the draw and more detail so we can make the same thing?
Now how can we install this in our cars so we don't have to use gasoline?
Generalnie to fajny i prosty temat do zrobienia, ale. Do czego to wykorzystać i jak ( ja np: miałem w golfie 3 jako dodatek do powietrza zrobiony na przekazniku i drugim przycisku podgrzewania tylnej szyby użyłem tego 3razy bo miałem źle dopasowany ( moze za dużo)chlorek potasu i palił mi przekaznik. To było z 15 lat temu mam ten swój generator do dzis zakopany w szpejach garazowych
Musisz to zamontować do jakiegoś silnika spalinowego 😁😁
Мужик, посоветуй ему сначала оформить страховку на здоровье..👻🤣
thanks fo sharing such a great video. How much hydrogen produced from each kg of water? can we also used seawater becuase world is already shortage of fresh water.
Who does everyone says Hydrogen (H) to HHO? 2 different things!!!
I agree. larger tube would result in more HHO in you r flash back
I fail to see how you think electricity can jump from one bolt to the next.
That's good for a basic demo however a single coil electrolyzer only produces Orthogydrogen which is volatile and burns hot causing embrittlement in aluminum block engines (if you're thinking of supplementing your fuel efficiency). You need to build a reactor that has dual coils at right angles to produce both Orthohydrogen and Parahydrogen (burns slower and steadier, and balances the combustion behavior of the Orthohydrogen in the electrolyzer/reactor). Otherwise you have to treat your aluminum block engine with a heat treatment like Ceramizer so you don't pit your cylinder walls or burn through your head gasket.
Then the issue of what electrolyte to use.... if you use potassium hydroxide (lye), then you create toxic sludge that has to be flushed from the reactor every so often. I tried, but creating an organic electrolyte costs big $$, more than I had in my R&D budget.... still... it's a fun experiment, and that guy who created the HHO welder version did an impressive job. Good Stuff! 😎👍
Aluminum block engines must have iron sleeves, maybe you are referring to aluminum heads? I think HHO maybe a viable solution for 2-stroke or even rotary engines though.. Haven't given it much thought. ¯\_(ツ)_/¯
Good information and I'll have to read more about it. Hydrogen embrittlement makes sense, didn't know about Orthohydrogen and Parahydrogen, only HHO. Very interesting!!!
When will you get your act together and realize that just by "VIBRATING the water at the correct frequency will release 10 times as much Hydrogen. Today's technology is so lame!! They could also inject the "B" field of a magnet at the correct frequency and release 100 times more Hydrogen per volume. It needs to be a vibration, not a oscillation big difference!! The "B" field is the most powerful part of a magnet! FACT!! it is the center part of a magnetic force.. If you want to play with anti gravity just tap the center of any bar magnet on any plastic or glass object it will loose weight!! Don't tap on any metal or iron it will disrupt the magnetic field. The entire universe is 100% magnetic . We should be able to develop a simple Hydrogen generator regulator that is small enough to attach next to any standard auto carburetor. The height of ones intelligence is directly proportional to their realization of their own ignorance
@@vincecox8376 you still have to generate a BALANCED blend of Orthohydrogen and Parahydrogen gasses.. otherwise you end up with engine embrittlement (on aluminum heads & gaskets... then you still have to deal with creating a biodegradable organic electrolyte... NO MATTER HOW MUCH VOLUME YOU GENERATE...
Look up pistol shrimp... Yes shrimp. It is one of the most fascinating creatures on this planet. Also do some research on The different types of helium isotopes (how they behave in respect to hydrogen and The changes in properties and structure under different environmental influences such as temperature, light, and pressure, etc...), magnetic fields, and the semiconductors gallandium and Indium tin oxide (paying close attention to their electrical qualities when in a gas form) also when doing this don't limit yourself to only collecting energy from one source. Think hybrid in which electrical energy is taken from multiple, cooperative and agreeing materials. Perhaps you can rid yourself of decay waste through some kind of evaporation process in which materials can be re-harvested and reintroduced to be used a second time. Allowing less waste and a higher efficiency?...
We talk about collecting electrical energy from nature but I don't think anybody ever stops and looks at how nature does it, because she does it very well, with minimal waste. She shows us how through some of her magnificent creatures. Maybe look into using hi/lo crossovers to introduce a sound wave to the hydrogen? I'm willing to bet there is a frequency you could produce that will create a vibration which might move the hydrogen particles fast enough to create a vacuum I mean who doesn't like a system in their car and how awesome would it be if your music powered your car? Double whammy passing the sound wave through the water would muffle it so we wouldn't need those stupid little trunk dampers! just use your hydro-generator. Okay so now I'm getting into jokes but I really want to ask somebody "how many miles per song will your car do?" 🤣 Do you think in this hypothetical situation that the genre of music you listen to would affect your fuel efficiency and mileage? Now keep that mental picture and makes it with people's already really shitty driving and go 😂😂
Anyway evaporation process is probably your friend in all this too because in reality the fuel that runs your car is only flammable in a gaseous state. All right anyway I've said too much and you probably stopped reading a long time ago as my boyfriend says with his caring sidebar 🤣🤪 You probably didn't have as much fun reading this as I had writing it. But if you want to talk about it some more just go on a forum and ask all the physics and quantum mechanics majors. You might have to remind them to speak more clearly and slowly if you're not into the whole quantum physics jargon.
Let me share a few facts, I've been a Ham operator since 1959 as a general class operator I designed and built all my equipment (the TUBE days'). You have a good understanding of inductance!! I agree with all your findings. BUT!!! I want to expose something you can get into and it's going to blow your mind. JUST LIKE TESLA SAID look for things you can't see!! So, let me introduce you to what I refer to as the "B" field., I'm sure you know that there are three elements to any AC or Radio wave traversing space The oscilloscope only shows the two base elements, the positive and negative parts of any radio signal "BUTT!! The fact is it's the centerfield of a magnet that pushes the signal out whether it be AC current or a radio signal same thing!! Her's what I want you to learn: the centerfield of a magnet is by far the most powerful!! FACT! I refer to it as the "B" field, for a good reason it's much more complicated, Here's just a few facts:
#1. If you tap the centerfield of a magnet (IE: the "B" Field) on any none Metalica item, it will lose weight.
#2. If you tap the centerfield near a trickle of water, it will repel the water!!
#3. If you vibrate the center field into a granite rock it will not only lose weight but also be very workable, what basically happens at the correct frequency the Quarts in the rock will reorganize.
#4. The center field of a magnet is multi-dimensional.
Once you start to see what's going on