Running Bike On Water - 100% Working Trick

Поделиться
HTML-код
  • Опубликовано: 11 июн 2024
  • Running Bike On Water - 100% Working Trick
    THE MOTORCYCLE PROPELLED WITH HYDROGEN
    Operating instructions:
    When the switch of the electrolysis equipment is activated, the water begins to decompose and we obtain a gaseous mixture of hydrogen and oxygen that passes to the bubbler tank and is compressed to a pressure of 3.2 Bar. At that moment we have enough pressure for the bike to start. When the motorcycle runs at low rpm, the excess gas generated is expelled to the outside through a pressure relief valve that is installed in the bubble tank. And when the motorcycle runs at high revolutions per minute, all the gas that is generated in the electrolysis equipment is consumed by the motorcycle's engine. In this way the motorcycle engine always has the correct amount of fuel. Thanks to the HH+ compound, the hydrogen generator generates large amounts of hydrogen using very little electrical energy. This means that the motorcycle battery will never run out because as long as the motorcycle is running, the battery will continue to charge automatically and we will have fuel as long as we have water in the electrolysis equipment tank.
    Some time ago we discovered a way to make the electrolysis of water efficient enough to run a gasoline internal combustion engine all the time. We applied this technology to a gasoline electric generator, but we have still continued research to be able to apply it to a 650 cc motorcycle, and the result has been impressive.
    We are fed up with energy companies running the world, and for that reason we want to legally continue our revolution by showing the technology they have hidden.
    __________________
    TURN ON SUBTITLES. THEY ARE TRANSLATED INTO SEVERAL LANGUAGES
    INDEX:
    00:00 Intro
    00:28 Manufacturing
    00:41 Link video manufacturing hydrogen generator
    01:09 Manufacturing HHO Flame Arrestor
    02:46 Motorcycle Features
    03:47 Air filter modification
    04:36 Placement of the Hydrogen Generator
    06:05 Preparation of Water with the HH+ compound
    06:18 Link HH+ Compound
    06:49 CDI reprogramming
    07:05 Commissioning and indoor testing
    08:35 Placement of decorative stickers
    09:06 Outdoor test
    10:30 Acknowledgments
    10:47 Join the Energy Revolution
    __________________
    - If you want to know more about the HH+ compound, watch this video: • ¿QUÉ ES EL COMPUESTO H...
    - To become a member of the channel, click on the following link:
    / @thelibertyengineproje...
    We want to thank all the members of our channel, but especially the Elite members:
    -German F.
    - Stephen Zorrilla
    -Robert Martin
    -Scott Fogarty
    -Brian Blackmore
    -Gerald Conche
    - arif yıldırım
    THANK YOU!
    __________________
    Purchase links on "Amazon":
    Materials used for the hydrogen generator:
    - Stainless steel sheet: We can buy it in a junkyard
    - Gasoline electric generator: amzn.to/3CbG0TT
    - Water filters: amzn.to/3jDuZEL
    - Stainless steel M6 threaded rod: amzn.to/3i3hpK8
    - M6 11mm Nylon Washers: amzn.to/3GuqYLR
    - M6 18mm Nylon Washers: amzn.to/3YWKjMO
    - Steel mesh filter: amzn.to/3PCwZLb
    - Ø40 PVC tube: amzn.to/3NtB1mB
    - Ø40 PVC plug: amzn.to/46H8SBp
    - 1/4" valve for hydrogen passage: amzn.to/3PAXsZy
    - 1/4 tube 8mm connector: amzn.to/430zhHf
    - 1/4 tube 6mm connector: amzn.to/3PAwVM0
    - 6mm tube: amzn.to/3NvpEud
    - 8mm tube: amzn.to/46w4t3M
    _________________
    Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.
    HOW WE RECORD OUR VIDEOS
    -Sony RX10 IV: amzn.to/3VDUXFg
    - GoPro HERO11: amzn.to/3NvGGbS
    - Insta360 One RS Twin Edition: amzn.to/3CQDz9k
    - iPhone 14 Pro Max: amzn.to/3CipqSi
    - SMALLRIG 72" Aluminum Tripod: amzn.to/3NrUOmi
    - COMAN tripod: amzn.to/45u6uNs
    - Display Batteries: amzn.to/3IgeoRt
    - Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9
    - Articulated arm: amzn.to/3opJSxc
    - HDMI adapter for iPhone: amzn.to/45vCvVl
    - Bresser pantograph F001483: amzn.to/3MUW16t
    liberty engine, water engine for car, forbidden water engine, hydrogen engine, engine runs on, engine runs on water, engine runs on hydrogen, water like gasoline, engine, infinite energy engine, water engine, energy engine free, engine with salt water, electrolysis of water, electrolysis engine, electrolysis water engine, free energy, perpetual energy, how to make a homemade water vapor engine, motorcycle that runs on water, hydrogen engine, stanley meyer, Arturo Estevez Varela, homemade hydrogen motorcycle, hydrogen engine, hydrogen motorcycle, motorcycle with hydrogen generator, bike experiment
  • НаукаНаука

Комментарии • 2 тыс.

  • @jeffhobbs3572
    @jeffhobbs3572 6 месяцев назад +27

    This is not real. Believe me I have built several hydrogen units. This battery on the motorcycle cannot handle the amp draw needed to power the unit. and this unit is only putting out about 1/4 liter per minute. You need a reservoir in order to produce enough hydrogen when accelerating. The real deal here is he is getting lots of likes and reviews. Good for him, but believe me it does not work. It can work however you need much more to make it work.

    • @yepyepfool4711
      @yepyepfool4711 6 месяцев назад

      @@Unforgiven2320look up literally anything on hydrogen powered vehicles.

    • @samuelnedelec3955
      @samuelnedelec3955 26 дней назад

      Boujour il veut peut-être qu'on trouve la solution pour lui dans un commentaire ? ++

  • @opossom1968
    @opossom1968 Месяц назад +11

    Trick.
    One, hydrogen engine requires much higher compression ratio.
    Two: The hydrogen generating fuel cell is NOT producing enough hydrogen to run the engine by itself.
    3: The amount of electricity needed is far greater then what a battery or alternator can produce to run the engine as shown. Yes this is how you can extract hydrogen from water, but this is very inefficient.
    H2-02 Heavy water is a chemical compound composed of deuterium, a hydrogen isotope with double the mass of ordinary hydrogen, and oxygen.
    This 'Heavy Water' has more hydrogen, and better suited for this application.
    Cleaning of the system is paramount to keep working properly.

    • @zchannel5973
      @zchannel5973 Месяц назад +1

      You can produce HHO with pulsed frequency with very low amps and using distilled water. The trick is to condition the pipes using varied frequencies which produce a white powder coating material on the conducting surfaces increasing capacitance. When done correctly the HHO production is quadrupled and there is no heat generated. I have done this 20 yrs ago and still have the equipment.

    • @opossom1968
      @opossom1968 Месяц назад

      @@zchannel5973 Using Heavy water instead of distilled is the key to larger production of Hydrogen with the same voltage. I designed a system using old O2 welding bottles, large ones 2,700 liters of oxygen, about 4 to 5 feet tall. Filled with heavy water, made the cathodes out of stainless steal, 1cm x 3.5feet long arranged them 1mm apart, looking just like in a nuclear power generator control rod package. This was for ease of removal for cleaning. Threaded the tanks, cutting them right where they neck down, then screwed in the cathodes. when energized the array produced enough hydrogen to power a 1.6 liter Kia Rio engine. Power sucked because of low compression of the engine, but the system would produce for about 400 miles. More if i would have used a higher compression engine say 15 to 1. Then power would have greatly improved and with more energy i believe the range would have at least doubled. Easy to clean and refill. with regular tap water it would run but seemed to be lean and mileage dropped to about 200 miles and made way more brown gunk and deposits on the cathodes. Distilled was way cleaner but still not as much production. Was fun to play with but i never patented the design. Used a 225 amp alternator for power and a small compressor with a 2 liter bottle as storage tank for the hydrogen, so it would off gas then compress inject while driving. not complicated and today i could really build a nice system using computers to meter correctly. May have and still maybe a money maker.

  • @Mr_Fancypants
    @Mr_Fancypants 7 месяцев назад +535

    Then he got poisoned and his bike was suddenly gone.

    • @Callmekntando
      @Callmekntando 7 месяцев назад +15

      He posted how he did everything on yt so hopefully that isn't the case

    • @cheechychongz7124
      @cheechychongz7124 6 месяцев назад +9

      I been doing this for years ,blowing up coke bottles ,using flame torch ,is very simple technology really but can also be a little bit dangerous if Ur not aware of wat Ur doing

    • @luiscotto6659
      @luiscotto6659 6 месяцев назад +5

      💯

    • @jasonhmoore
      @jasonhmoore 6 месяцев назад +45

      Like the guy named Stan Myers and the 80s who created a water-powered buggy and drove from the West Coast to the East Coast are on a couple gallons of wahe had a meeting at a Cracker Barrel with GE and government officials and they poisoned his cranberry juice he ran out of the parking lot and died right there

    • @Rannvijays
      @Rannvijays 6 месяцев назад +29

      ​​​@@jasonhmooreyes, I have also heard about it. Big corporations do not want us to access cheap/free energy.

  • @craase1
    @craase1 6 месяцев назад +7

    Nice work, I wish I had the skills to do that man Bravo!

  • @MrLsitzes
    @MrLsitzes 6 месяцев назад +13

    The math doesn't add up. Hidden tank somewhere because it wouldn't run that large of an engine on that small of a generator. If you're going to make a video like this at least lead people in the right direction with a project that's actually feasible.😂

  • @tuncaysimsek8210
    @tuncaysimsek8210 6 месяцев назад +12

    If you had used 316 Ti steel instead of 316L; you would not have any stain and you should also have used the fuel tank for "water tank". The main idea in electrolysis is the surface area. So you do not need such a big reactor to electrolyze. You need a tablespoonful of 316 Ti dust, two chambers seperated with a layer of nylon, which transfers water but not the 316 Ti dust. Put the dust in each chamber. To each end of chambers, you should put cathode and anodes also made of 316 Ti. your reactor wouldn't be bigger than your palm and it would create a lot more pure hydrogen than you expected. You also wouldn't need to put the unit at the rear. Just put it beneath the water tank. So your bike would seem no different than a usual one, but run on pure hydrogen. Now you have the "know how". See if you can do it...

    • @ibercommulticom1437
      @ibercommulticom1437 6 месяцев назад

      Hay apoyar manda tu link así lo vemos campeón

    • @diaryofadeadtattooist
      @diaryofadeadtattooist 6 месяцев назад

      Interesting. Have you seen this done already? Is it related to the hotrod stuff thats out there? I'm keen to learn more on this subject 👍🏻

  • @miguelarivera
    @miguelarivera 8 месяцев назад +22

    How much do you charge to convert a gasoline engine?

    • @motorpartsgururestorationc9116
      @motorpartsgururestorationc9116 8 месяцев назад +5

      He wont because it is complete bull

    • @miguelarivera
      @miguelarivera 8 месяцев назад +2

      @@motorpartsgururestorationc9116 talk is cheap have you tried debunking his claim?

    • @yasirrakhurrafat1142
      @yasirrakhurrafat1142 8 месяцев назад +4

      @@miguelarivera water contains hydrogen.
      Which can run an engine.
      Because it contains energy.
      Chemical energy.
      Each litre/kg of water has 2gm/70ml of hydrogen.
      Hydrogen is hard to store.
      And you cannot use hydrogen right out of water.
      You have to seperate hydrogen from H2O, i.e water. Before hydrogen can be used as fuel.
      This guy might have just used alcohol ( which looks very clear. Or just like water ), to run the engine.
      Alcohol can run an engine.
      High percentage alcohol.
      Sorry, for the perhaps a disorganised answer.
      But simple answer is.
      This guy lied, and probably used some clear fuel like methanol, ethanol or isopropyl alcohol.
      These look like water, and can be used to run an engine
      Do not use alcohol in your engine, car or bike.
      Look up running bike on ethanol/alcohol on yt. And you'll understand what I'm talking about.

    • @Jonathan-un7uq
      @Jonathan-un7uq 7 месяцев назад +1

      Dumbest comment ever

    • @Blue_King-on9wm
      @Blue_King-on9wm 7 месяцев назад +2

      @@yasirrakhurrafat1142thank you for being one of the few that know👍

  • @paullaurent9771
    @paullaurent9771 9 месяцев назад +8

    Encore un mec qui va disparaitre dans des conditions bizarres ....

  • @davidt1621
    @davidt1621 10 месяцев назад +8

    I had a conversation with an AI about this. It speculated that your white "HH+" powder is a highly concentrated industrial grade of citric acid. It told me that such an acid would appear like granulated white powder and that it would have a concentrated density of H+ protons that release when dissolved into water.
    In simple terms, it could be possible with experimentation and the ability to obtain industrial grade citric acid powder. Basically, with experimentation, it's possible to find the right combination of citric acid and PEM Hydrogen Fuel-Cell placement to create an efficient electrolysis process which creates more useable energy from hydrogen gas than the energy it takes to make the gas.
    When you add citric acid to the water used in the electrolysis process, it can increase the concentration of H+ ions in the water. The presence of a higher concentration of H+ ions can enhance the ionic conductivity of the water, making it a better electrolyte. As a result, this can potentially improve the efficiency of the electrolysis process, leading to an increased production of hydrogen gas (H2) at the cathode during electrolysis.
    With a higher concentration of H+ ions in the water, there will be more available protons (H+) at the cathode for reduction, which is the process that generates hydrogen gas. The greater ionic flow of electrolytes in the electrolysis process can help ensure that more protons are available at the cathode to be reduced into hydrogen gas.

    • @TolisOnLine
      @TolisOnLine 10 месяцев назад +3

      Finally someone making sense.

    • @davidt1621
      @davidt1621 10 месяцев назад

      @@TolisOnLine Thanks. I tried to simplify it. I think that if you say the same things enough times in different ways, then most of the people who read it will start to get the idea and see how it could be experimentally successful. That's how grade-school science teachers taught, along with being odd and entertaining. What's more oddly entertaining than learning about a zero-point clean-energy producing electrolysis process from the speculations of an AI? Well... I mean, I guess there are some things, but it's pretty fun.

    • @user-wf4hy4ub7p
      @user-wf4hy4ub7p 6 месяцев назад

      Any soluble compund will work in the electolite as long as it increases conductivity.

    • @davidt1621
      @davidt1621 6 месяцев назад

      @@user-wf4hy4ub7p No. You need something that can also release extra Hydrogen just by dropping it into water. That's when aluminum hydride tablets enter the equation.

    • @user-wf4hy4ub7p
      @user-wf4hy4ub7p 6 месяцев назад

      @@davidt1621 Baking soda will also do the trick and isn't toxic. Salt works as well.

  • @jefftaylor9305
    @jefftaylor9305 8 месяцев назад +8

    What did you use, sodium hydroxide or potassium hydroxide for your electrolyte??? Considering the engine is for gas, not hydrogen, how far did you advance the timing??? How did you deal with hydrogen burning hotter than gas??? Did your head crack or just blow out your valves??? I was thinking a porcelain head for the heat or stainless steel water cooled. You have to run a cooler plug, what did you use??? Unless your exhaust is 316L stainless steel, which none are made with that, the water is just going to corrode it over time. When the bike is at idle what happens to the excess hydrogen??? Do you just blow it off (dangerous), or use the frame tubing of the bike to store it for acceleration...??? Man... so many questions I have...

    • @greenfueltechnologyhhogogr9813
      @greenfueltechnologyhhogogr9813 8 месяцев назад

      Potassium hydroxide is better then sodium hydroxide because sodium hydroxide is more corrosive than Potassium hydroxide so it's better for your fuel cell

    • @CraigToddOfficial
      @CraigToddOfficial 8 месяцев назад

      ​@@greenfueltechnologyhhogogr9813Potassium hydroxide enables around 3x the output as well. Just very corrosive so be careful not to get any on the skin.

  • @Mvelasefm
    @Mvelasefm 7 дней назад +4

    I think the best way to introduce water engines is to quietly do conversions let as many people drive cars on water so that we will see our governments suddenly try and create laws against water based engines then we will know how much freedom we dont have to free our environment as well as to free our finances... from expensive fuel!

  • @naturalbornchiller1765
    @naturalbornchiller1765 Месяц назад +8

    Smart enough to hide his face

  • @herenow2895
    @herenow2895 11 месяцев назад +5

    As the HHO is produced at a constant rate, how does the system cope with fluctuation in demand ?
    What happens to the extra gas that is produced when demand is low, like for prolonged idle ?
    and when demand is high, at prolonged full throttle, does the system produce enough to keep up ?

    • @captnuggets1611
      @captnuggets1611 11 месяцев назад

      well if he’s still using the EFI system and rigged to the water injection then my guess is the closed-loop operation would remain the same. Also im guessing he engineered a mixture that combust similar to hydro-carbons/air mixture in order to save the engine and EFI together.

    • @diego432hz
      @diego432hz 11 месяцев назад +1

      They can't answer these and a lot of other questions because their whole channel is lies.

    • @herenow2895
      @herenow2895 11 месяцев назад

      @@captnuggets1611 - There is no "water injection". The HHO generator produces the mixture of Hydrogen and Oxygen at a constant rate and a constant ratio of the two gasses. The HHO gas is fed into the inlet. I'm guessing the blocking off of one inlet port was to reduce that air/HHO ratio to a suitable level.
      I think that the only thing that can alter the amount of HHO produced is the charge going through the cells.
      I would be very interested to see this setup road tested in heavy traffic conditions and out on the open highway. To see if the HHO generator can deliver enough gas for the bike to perform normally in all conditions.

    • @TolisOnLine
      @TolisOnLine 10 месяцев назад

      @@diego432hz Please explain.

  • @act.in-heart
    @act.in-heart 5 месяцев назад +10

    not enough hydrogen gas this is only magic tric

  • @tomoya4614
    @tomoya4614 Месяц назад +1

    エンジンオイルは乳化しますか?
    内燃機関での水素利用では、エンジン内の水蒸気とオイルが混ざって乳化してしまうと思いました。

  • @EstebanMorales-rm9oq
    @EstebanMorales-rm9oq 9 месяцев назад +2

    Only thing missing is to remake a plastic, fiberglass or carbon fiber fuel tank replica cover with 2 filling caps to house the electrolysis system in. Maybe using somewhat of 2 rectangular or even round tube but with a side fill port. So can fasten the ports facing up under the cover. Keeps the bike looking stock and clean without all the gadgets hanging off the tail. Awesome experiment

  • @hva3773
    @hva3773 2 месяца назад +5

    Termodinamicamente es inviable: la energia que requiere la electrolisis del agua es superior a la que se genera combustionando el hidrogeno obtenido. Dejen de ilusionar a personas no instruidas en fisico-quimica. Un ejemplo elocuente es pretender refrigerar un ambiente dejando la puerta del refirgerador abierta. El calor que desprende la parrilla trasera es superior al que se removeria mezclando aire frio que saldria del refrigerador

    • @savingfuelboostperformance
      @savingfuelboostperformance 2 месяца назад

      The package comes with complimentary installation or includes free shipping worldwide.

  • @oxenogames2364
    @oxenogames2364 6 дней назад +3

    Empieza a sonar: Dile ya a tus papás que no vas a regresar xdxdxdxd

  • @ZelimirSkrbic
    @ZelimirSkrbic 5 месяцев назад

    Nemogu verovati ali vidim da je istinito.Bravo kapu dole

  • @guilt-toyracing3588
    @guilt-toyracing3588 7 месяцев назад +1

    hi, can you tell me what you did to the CDI to run ? did you advance the ignition timing ? thanks

  • @Weneedtrump
    @Weneedtrump 4 месяца назад +7

    I'm running the same set up on my truck and I've put about 50000 mile on it run better and way cleaner and have no gas bill glad I did it

  • @greenwoodforest8972
    @greenwoodforest8972 6 месяцев назад +7

    Where do you get the power for the electrolysis? How many percent is the energy conversion ratio from electricity to hydrogen? 49 kilowatt hour of electricity produces 1 kg of hydrogen, which delivers just 33 kilo watts of power. (49kwh electricity = 1kg hydrogen, 1kg hydrogen = 33 kwatts of power). You've got a deficit boy!!! Good luck!!! :-)

  • @sixaxis8742
    @sixaxis8742 Месяц назад +5

    Kawasaki are doing testing this year with a new model of H2 SX with hydrogen

  • @Bojan-yz7sp
    @Bojan-yz7sp Месяц назад

    Odličan video, svaka čas, pozdrav iz Srbije

  • @rere439
    @rere439 11 месяцев назад +4

    keep going!! love from Indonesia

  • @miguelaleu3557
    @miguelaleu3557 7 месяцев назад +5

    Se olvidó de desconectar la bomba de NAFTA eléctrica en la última prueba, se escucha cuando le da contacto 😂😂

  • @jhanaetucker7905
    @jhanaetucker7905 12 дней назад +2

    Customize the bike to cover the installations that’ll be so dope!

  • @paulpierrot1656
    @paulpierrot1656 4 месяца назад +1

    Excellent mon gars 👍🏽

  • @jonasgrings5615
    @jonasgrings5615 28 дней назад +3

    Thats the reason why my professor says everyone in poltics should know thermodynamics.😂
    But he got the clicks^^

  • @xjds2882
    @xjds2882 2 месяца назад +7

    Vous consommez plus d'énergie pour fabriquer de l'hydrogène que le prix qu'aurait coûté l'essence

  • @user-yw1lb5ru7p
    @user-yw1lb5ru7p 2 месяца назад +1

    Great ❤ be save thanks for sharing

  • @emilioalvarado-alanis8229
    @emilioalvarado-alanis8229 6 месяцев назад

    Wow this is so inspiring, thank you!!!

  • @and9290
    @and9290 7 месяцев назад +7

    Use "Holy Water" you'll get at least 83% boost in power.

  • @reinaldoguerreiro2815
    @reinaldoguerreiro2815 9 месяцев назад +3

    Essa moto vai estar a venda? Vocês fariam uma dessa sob encomend para vender?

  • @sergioferrerca
    @sergioferrerca 5 месяцев назад +1

    Si esto es verdad ,este hombre es ingeniero minimo seguro. Mi enohorabuena.👍👍👍

  • @farrukhnasim6332
    @farrukhnasim6332 8 месяцев назад +1

    Very good and proper work

  • @mayday6880
    @mayday6880 2 месяца назад +6

    using a motor to drive a generator that generates electricity to make Hydrogen (electrolysis), is completly nonsense. The efficiency is lower, the fuel consumption increases.

  • @chlapysobe
    @chlapysobe 10 месяцев назад +6

    How easy it is to tell people something. Mathematics for elementary school. 660ccm x 6000 rpm average 3960000 : 1000 = 3960 liters of air per minute. the ideal mix of h2 and air is 19-59%. So the device must produce an average of 1980 liters per minute :)
    Are you serious ??? Really?

    • @dadougruuut9654
      @dadougruuut9654 10 месяцев назад

      Following the same logic, it would also requires 1980 liters per minute of gaz/air mix no ? What is the ideal mix of gaz/air ?

    • @MrAcapela
      @MrAcapela 10 месяцев назад

      It only need the gas ,to work,,like cooking gas , oxígeno and hidrógeno,it s gas

  • @rainersieling5512
    @rainersieling5512 5 месяцев назад +2

    Sehr gut ! Jetzt noch in Serie und viele schauen dann blöd aus der Wäsche.

  • @bitsurfer0101
    @bitsurfer0101 4 месяца назад +1

    What is the rate of consumption vs. generation? Did it generate faster than it uses even at highway speeds?

  • @fernandolopez2394
    @fernandolopez2394 2 месяца назад +4

    Suena bien el motor, es de 4 tiempos parece... ¿Q tipo de bujia utiliza?¿Despues de modificarla necesita el filtro de aire? Funciona con hidrogeno y en vez de humo del combustible... Expulsa vapor de agua (H2O en estado gaseoso)?🤔
    Agradeceria si alguien me explica xq parece un poco complicado😅

  • @worlddreimex3404
    @worlddreimex3404 2 месяца назад +8

    Lo encontraron muerto por suicidio con 40 disparos por la espalda atado y debajo de un lago.

  • @uyirwothrobert9841
    @uyirwothrobert9841 9 месяцев назад

    Very fantastic brother,
    How I wish to have that due to high fuel price in my country Uganda.
    God bless u!!

  • @aztignakapesabaw2365
    @aztignakapesabaw2365 6 месяцев назад

    AMAZING .. SO PROUD FOR YOU ❤❤❤🎉🎉🎉

  • @erichop822
    @erichop822 5 месяцев назад +10

    Let's skip all the obvious lies. You say your module draws 5 amps. That's 60W. Commercially available electrolysis systems require about 50 kWh of power to produce 1 kg of H2 from 9 kg of water. Your module will be able to produce 60/50000 or 0.0012 kg = 1.2 *gram* of H2 per *hour*. Hydrogen gas releases 34 kcal per gram upon combustion in air. And you want to run a bike on that? Another even simpler debunk: 60W for an engine that needs in the order of 50kW to run?

    • @johnathonsandler9507
      @johnathonsandler9507 5 месяцев назад +1

      Those are the stats for producing hydrogen. This is producing hydrogen+oxygen. It's more of a process to produce oxygen and hydrogen separately.

    • @erichop822
      @erichop822 5 месяцев назад +2

      @@johnathonsandler9507 Are you for real? I left out the oxygen part because that's a given for electrolysis. Please explain the magic you think that allows this guy to break the laws of physics?

    • @johnathonsandler9507
      @johnathonsandler9507 5 месяцев назад

      @erichop822 it all depends on the material used and the way they are placed. I've seen situations where steel wool inside a sock then the next piece of steel wool wrapped around the sock with wires going to each steel wool for the power works also. The power used is based on the design of the metal.

    • @johnathonsandler9507
      @johnathonsandler9507 5 месяцев назад

      @erichop822 the real question is how the hell would it produce more so the engine revs up. I get you could pump it into the air intake to save on gas but I don't understand how it could use more without upping the voltage. Seems like you would need a hydrogen fuel cell but then it would basically be all electric

    • @johnathonsandler9507
      @johnathonsandler9507 5 месяцев назад

      Lawn mower even runs off hydrogen fuel cells and ge demonstrates everything and answers questions

  • @astrimaz
    @astrimaz 4 дня назад

    Excellent Video Blessings Greetings from Salina Cruz Oaxaca Mexico 🙋🏿‍♀️😁👍🏾🇲🇽

  • @user-fg3qn8ho8s
    @user-fg3qn8ho8s 9 месяцев назад

    Hello bog question. When yiu tunned the ecu's motorcycle. Did you decrese the entrance of hydrogen ? Or that did you do?

  • @Callmekntando
    @Callmekntando 7 месяцев назад +4

    Impressive how the electrolysis is working 10x faster then regular

  • @Ron-nm6yr
    @Ron-nm6yr 8 месяцев назад +3

    What is the percentage of saving on gasoline fuel? Do you still need gasoline to run the bike? Or Is it 100% on hydrogen? Can you please give more specs on usage and savings ?

  • @ThanhNguyen-zh8dc
    @ThanhNguyen-zh8dc 5 месяцев назад +1

    Rat tuyet voi.nhung cung rat de chay no.

  • @BC-uu6iz
    @BC-uu6iz 5 дней назад

    from where to buy the hh+ powder? because it is making all the difference, is it possible to install it on a 13cc car?

  • @53rizelistyler53
    @53rizelistyler53 Месяц назад +6

    this is not water this is water -hydrogen ... Anyone who purchases hydrogen at the filling station must currently expect a price of 12.85 euros for 1 iters. !!!!
    1 liter of liquid hydrogen is equivalent to 0.27 liters of gasoline, but weighs only 70.8 grams - and contains around three times more energy than 1 kilogram of diesel or gasoline. 1 kilogram of gaseous hydrogen has a volume of 11 cubic meters and is equivalent to 2.75 kilograms of gasoline.
    i have study mashinengeneering in germany millitary therrefore my english is not sooo good My grandpa came to Germany from Turkey 70 years ago as a guest worker. We are not REFUGEES!!!! Bigger difference. My ancestors built Germany after World War II and didn't exploit it like the others! :D.

  • @dominiklackner6334
    @dominiklackner6334 6 месяцев назад +6

    as long as people think brute force electrolysis is the way to make hydrogen, this will always be a funny experiment. look into voltrolysis. its not electrolysis, you don't send current through water, therefore the water needs no "hho compound" which is actually everything like salt to make the water more conductive and therefore the cell does not draw any amperage and run with tap water only. only the electrical circuit draws a few milliamps. you have to charge the cell as a capacitor until the electrostatic force rips apart the h2o molecule with a step charging half sine wave. your cell is a toy, your way of doing it is a chemistry class experiment. when done properly, with cylindrical isolated tubes which has the same resonant frequency and a charging circuit you are on the right way. but if you would have it done properly this video wouldn't be online anymore and your bike would have been confiscated by the feds already. people who know how its been done don't post their work on the internet because of this reason.

    • @fredmauck3547
      @fredmauck3547 6 месяцев назад +1

      It still seems as though hydrogen is the way forward

    • @arur2137
      @arur2137 6 месяцев назад

      Я на свою мошину поставил 3 эл. Генераторов и то амперажне зватает но эконмия 70 еше олин генератор и сама поедит без добавки пропана

    • @Eaglepass
      @Eaglepass 6 месяцев назад +1

      They still have that stupid question called: Confiscated ⚒ possibility.
      "Unknown_scripted detailed_fill in the blanks" "the wrecking crew" famously Silhouettes.
      ...O-yeah fireworks have been demoted defamed fossilized left-over wimpy handy replacements in our devoted Instalation.
      They've looted our best-known toy boxes.
      The Company store has electronic tokens.
      I said vs I saith
      I wonder which ending we're in ?
      Biosphereical accounts?
      I'm thinking the scoreboards definitely rigged.
      HDES data or databases dearest departed betas. ⚒....Bones....⚒
      Heckling the Bagdad batt could make hydrogen.

  • @martinrochejocquelein1772
    @martinrochejocquelein1772 16 дней назад +1

    In the 60s my friends and i played around with my friends..we actually ran several lawn mowers and small motor bike off of hydrogen..we where amazed how it worked..we basically learned it from our science teacher.. we used what was known as browns gas..

  • @kdsdc5889o9
    @kdsdc5889o9 8 месяцев назад

    Parabéns vc e um gênio e deviam adotar esse tipo de combustão para nós locomover e poluir menos nosso ambiente Deus abençoe a ti

  • @joseantonio2417
    @joseantonio2417 9 месяцев назад +3

    Aqui no brasil tem motos funcionando somente com água pura a muito tempo. Isso não é novidade.

  • @vanillasmerk5742
    @vanillasmerk5742 Месяц назад +4

    Bobby bouche' would approve!

  • @laurentoutan9922
    @laurentoutan9922 2 месяца назад +1

    Bonjour, a t'elle toujours l entrée air pas le filtre a air d'origine ? Le HHO est injecté directement dans la boîte a air du filtre du coup ? Et quel débit minimum faut il pour démarrer un moteur a l hydrogène ? Merci

  • @swissactiontv5128
    @swissactiontv5128 2 месяца назад +2

    How you handle Lambda values and ignition timing?
    If i not wrong HHO burn faster than gasoline, so i guess the ignition Angle must be lower or close to OT?🤔

  • @gortnewton4765
    @gortnewton4765 6 месяцев назад +3

    ICE engines are able to run from hydrogen gas. I saw a 6 cylinder ICE engine in Melbourne, Australia running from H2 50 years ago. The problem is that in any 'splitter' of water into H2 and Oxygen, the splitter cannot do it fast enough for the engine. An alternative is to have a gas tank, but this is thought to be too dangerous just yet until safety improvements are made.

  • @diazgrajoauin
    @diazgrajoauin 7 месяцев назад +5

    Pray for this people, they will need protection

  • @jacksonscustoms9793
    @jacksonscustoms9793 3 месяца назад

    What is the maximum capacity engine that can be ran at it’s standard operating power range for this setup and how longer run time can you get with that

  • @sergio1979maciel
    @sergio1979maciel 6 месяцев назад +1

    Congratulations, your adaptation turned out great.
    One suggestion, use a side fairing protector on the motorcycle. And try to place the adaptation inside the protector. This left the plaque still visible. congratulations.

  • @MiniKuantum
    @MiniKuantum 11 дней назад +3

    good,.lets make it in industrial scale!

    • @fate9462.is_ashitking
      @fate9462.is_ashitking 7 дней назад

      You probably don't know how the last person who developed this engine "disappeared," do you?

  • @JaredSims-mw8vs
    @JaredSims-mw8vs 7 месяцев назад +3

    Could this possibly run with a v8 engine? Or atleast to improve has milage?

  • @igorcabrera8123
    @igorcabrera8123 6 месяцев назад +1

    Nice dream but what is the energy rate comsuption between the battery and the hydrogen unit?

  • @ekeretteekpo3004
    @ekeretteekpo3004 4 месяца назад

    I don't know if this thing actually works but I appreciate so much that you label basically every step, indicating the items used, etc. I don't have what it takes to build something like this, if not I'd be adapting it for an old car. Thank you for the video still.

    • @laerteoliveira7923
      @laerteoliveira7923 4 месяца назад

      I know this thing don't work. It's a joke.

    • @nemesis8604
      @nemesis8604 4 месяца назад +2

      Prove it hater....
      Hate people who are programmed to believe you cant make new things and only go by what someone has put in your silly brain....​@@laerteoliveira7923

  • @RR-pg3bi
    @RR-pg3bi 6 месяцев назад +4

    What does the hydrogen generator consume ,a whole lot of electricity

  • @guillaumedubarry4388
    @guillaumedubarry4388 Месяц назад

    bonjour, super video.
    Est t'il possible d'alimenter de la meme maniere une voiture essence en 4 cylindre?et combien de kilometres d'autonomie environ? merci.

  • @user-is8ig2ph2f
    @user-is8ig2ph2f 4 месяца назад

    Gracias por su tiempo amigo

  • @user-tg5rt2hk4e
    @user-tg5rt2hk4e Месяц назад +4

    The piston rings are not made to last in water, beside that the engine sounds then same as gasoline, even if the hidrogen burns faster. Something is rotten in Denmark!

  • @garycowger9579
    @garycowger9579 5 месяцев назад +2

    I run my John Deere riding lawn mower on hydrogen fuel using a system very similar to this been very efficient the only thing I have added is an oil mist drip so the cylinder and piton will stay lubricated that's the only drawback on it is lubrication, but it's overcome by an oil mist drip.

  • @joseluisaudelo3620
    @joseluisaudelo3620 4 месяца назад

    Mil gracias Dios te bendiga 🎉❤❤❤

  • @BSutarFun
    @BSutarFun 6 месяцев назад

    Great , Thanks 👍❤️

  • @marinizo1
    @marinizo1 Месяц назад +4

    and when the battery is discharged, the hydrogen technology went away, logically, the hourly current consumed by that generator is much higher than it can charge the alternator, and in this way the invention works until the battery dies

  • @pauljeanmougin8245
    @pauljeanmougin8245 5 месяцев назад +4

    and what about the lubrification of the gaz in cylindre ???

  • @andrewcamacho2134
    @andrewcamacho2134 8 месяцев назад

    UFF que maravilla sería genial adaptar las motos con ese mecanismo para empezar. Se ve genial

  • @gjsolis80
    @gjsolis80 6 месяцев назад +1

    Excelente video de ASMR

  • @2507ryan
    @2507ryan Месяц назад +7

    ok this video makes little sense. This guy didn't put in a new engine nor empty the gas tank. Sure he added a conversion kit basically but still doesn't explain how his engine that was a gas powered engine is running water through it. You can not convert a gas powered engine that takes oil and gas to run off of nothing but water. In this video the engine should of been replaced. That is why this video makes no sense to me. Tell me I am wrong and plz explain it to me?

    • @russellm7530
      @russellm7530 Месяц назад +1

      I think he means running it from hydrogen created from water but I still don't think this would work how it's described here.

    • @TripleB101
      @TripleB101 Месяц назад

      It’s not running on water it’s running on the hydrogen gas being generated by electrolysis with stainless steel plates in the one reservoir mixed with HH+ and the second one with water ..but I doubt that there’s enough being generated to keep the bike going

  • @cesamorice4099
    @cesamorice4099 Месяц назад +3

    SEÑORES ESO ES MUY CIERTO EN COSTA RICA POR 1:13 LOS AÑOS 70 UN MECÁNICO DE UNOS 60 AÑOS HIZO UNA DEMOSTRACIÓN ANTE LAS CÁMARAS DE TELEVISIÓN EN UN PROGRAMA EN VIVO Y LLEVÓ UN MOTOR DE CARRO Y LO PUSO A FUNCIONAR CON AGUA DURANTE LARGO RATO. DESDE ENTONCES NO SE VOLVIÓ A SABER DE ESE SEÑOR, UNOS DICEN QUE FUE DESAPARECIDO OTROS QUE LO CALLARON. PERO SI ES VERDAD QUE FUNCIONA, FUNCIONA

  • @NyasdaqCatGPT
    @NyasdaqCatGPT Месяц назад +1

    水をバッテリー電源で水素と酸素に電気分解して、発生した水素と酸素のガスをエンジンのピストン内でスパークプラグで圧縮燃焼させて、水蒸気を排出すれば良いのではないですか?

  • @maximovalentin275
    @maximovalentin275 7 месяцев назад

    desde españa canarias me encanta ese tipo de proyecto sigan a si

  • @supercrazy50000
    @supercrazy50000 9 месяцев назад +9

    that would be cool, but i think the hydrogen production is a bit too low to rev the engine so high, you would literally need a pool generating hydrogen ...

    • @davidt1621
      @davidt1621 9 месяцев назад

      It'll run on gasoline fumes, so why not the more highly combustible and more efficient hydrogen fumes/gas? A smaller jet in the carburetor is an optimization, but it's not necessary. And the timing sounds just fine. Even a couple of rusty nails attached to a 9 volt D-cell flashlight battery with alligator cable clips in 2 liters of water can produce 3 liters of hydrogen gas per minute. I'm sure he's using a quality production level efficient electrolyzer though. Those bikes can run off of 35-45mpg with gasoline. Probably over 50mpg with hydrogen, so it's very capable of running that engine. The alternator will keep the battery charged. He said he's not even drawing 5 amps, which is a minor fraction of the battery's load capacity.

    • @supercrazy50000
      @supercrazy50000 9 месяцев назад +4

      @@davidt1621 first of all the engine does NOT run on fumes, gasoline gets pumped in the engine and sprayed, but its NOT fumes, second thing, you can not produce more energy than what you use to produce it, it’s the first law of thermodynamics, and third, no way you can produce 3 liter of pure hydrogen by using rusty nails because rust is oxidation, which creates a layer of non conductive or poor conductive metal on it, making the resistance on the battery way higer then unusable, because 9V battery usually aren’t LiPo meaning the draining current will be few milliamps, so no reaction at all. Use you brain folks and don’t get fooled.

    • @davidt1621
      @davidt1621 9 месяцев назад

      @@supercrazy50000 The scientists who independently formulated the law of energy conservation in the 19th century, Julius Robert Mayer, James Joule, and Hermann von Helmholtz did not have knowledge of reverse electrolysis or internal combustion engines as these technologies and concepts were developed after their time. Their work primarily focused on fundamental principles of thermodynamics, energy conservation, and related theoretical concepts. The problem that pioneering engineers face today is modern scientists' stubborn unwillingness to revisit old theoretical frameworks when confronted with new discoveries which have contradictory functions or highly coincidental properties. This is why scientific paradigms change so slowly. It isn't because it takes time to replicate an experiment by the rest of the scientific community. Rather it is, because they ignore evidence and dismiss new information that's right under their noses. Their expertise is their personal identity, and they refuse to be open minded enough to consider the possibility that there is another valid paradigm that can explain many mysteries. Instead they cling to dogmatic theories with religious fervor as if their very life depends upon it, and those old theories just lead to many more mysteries and unanswered questions. Science isn't just there to disprove theories. To truly develop, science must eventually start proving some theories correct. Unfortunately, all anyone does in physics anymore is disprove theories all day. Maybe there's a reason they cannot prove any. Maybe it's because their foundational theoretical framework is fundamentally flawed, since it was never revisited with an open mind, except by pioneering engineers of course.

    • @davidt1621
      @davidt1621 9 месяцев назад

      @@percayaaja-153 I don't understand Hindi, Tamil, or any other Indian languages my friend. I think that's what you are using maybe. Do you speak Urdu or Farsi?

  • @expresull
    @expresull 5 месяцев назад +6

    It needs at least 4 liters of hydrogen per minute to work well, I don't think it works

  • @11164kloc
    @11164kloc Месяц назад

    VERY VERY NICE LOVE THE DESIGN ✨✨👑💜💯

  • @jimmyjohnson2480
    @jimmyjohnson2480 Месяц назад +1

    I can see small engine applications, but what about larger displacements? Say 300+ cubic inches (5 liter) ? This is an amazing video.

  • @huypt7739
    @huypt7739 8 месяцев назад +7

    Where is the part of pouring water into the gas tank?

    • @bagdadimas
      @bagdadimas 7 месяцев назад +1

      The hydrogen cell is the two bottles mounted to the rear of the bike. It works by having the cells insulated from one another, conducting electricity through the water in which separates the hydrogen from the water. The bubbles you see produced is the hydrogen gas. You don't have to put water into the gas tank as the fuel line is connected to the secondary bottle sucking the hydrogen gas as it's made. This is called hydrogen on demand. As hydrogen isn't stored and is made as it's used, there is no potential for danger of explosion. There simply isn't enough hydrogen to be hazardous although there is enough hydrogen to run a bike engine.

  • @tylershrader962
    @tylershrader962 4 месяца назад +3

    So sweet man. I don’t want anything else powering my ride. Lithium is an absolute joke compared to this on board tech. This could actually make people free and sustainable around the world.

  • @tariqulislam8295
    @tariqulislam8295 Месяц назад

    Awesome! Take my bike and any many more to exchange with this one 😂😂

  • @fernandodasilva8741
    @fernandodasilva8741 4 месяца назад +2

    Its all wonderfull but how about in winter time ? Because water eventualy it will freze

  • @froilanlagmay7433
    @froilanlagmay7433 5 месяцев назад +2

    The future of the world of cars and motorcycles. No more pollution no gasoline, this is the ultimate solution in a world contaminated with pollutants like oil and diesel engines.

    • @heinzpg
      @heinzpg 5 месяцев назад

      If this work we would have it already for a long time. Producing hydrogen by electrolysis is not new at all. Why doesn't this work? You can run a motor with hydrogen, but it is not possible to produce the hydrogen on board. Since the electrical power needed for electrolysis is always bigger than the power of the produced hydrogen.

  • @liamburbidge7222
    @liamburbidge7222 5 месяцев назад +3

    Thats one fancy petrol tank and air pump😂😂

  • @0NeAHonor
    @0NeAHonor 6 месяцев назад

    Do you need to refill the bike with water again and where do you fill it up or does it never run out.

  • @NoToFear
    @NoToFear 6 месяцев назад

    Possibly the coolest video I have ever seen on YT. I don't know much about science, but I can see a scene in a Mad Max 5 movie where the hero builds this to get away from the zombies with stuff all over a farm barn almost like Nowhere to run 1993 movie with JC van Dam.

  • @RobertSmith-lu2rm
    @RobertSmith-lu2rm Месяц назад +6

    The hydrogen flow has to equal the peak flow rate. I don’t think that one container is capable to do this.

    • @user-db4qh1mv1n
      @user-db4qh1mv1n Месяц назад +1

      Actually 1 will do fine for a bike. I’ve done 2 and 3 for a car 6 cylinders and 6 cells for a semi

  • @alberto.luizdealmeida7960
    @alberto.luizdealmeida7960 9 месяцев назад +3

    Pardal teacher. Professor pardal. No youtube tudo funciona.

  • @user-hs5ms4uq7k
    @user-hs5ms4uq7k 6 месяцев назад

    Неужели понемногу разрешают людям пользоваться, этой технологией, спасибо💪👍👏

  • @Hi-os4cc
    @Hi-os4cc Месяц назад +7

    Illuminati will come for you.. 😂😂😂😂😂😂

  • @ART3187
    @ART3187 19 дней назад

    Vous êtes trop fort 💪👍👍👍✌️

  • @ArielAlejandroTagliavini
    @ArielAlejandroTagliavini Месяц назад +3

    Buen dia como podria comprar un sistema de estos me interesa