I was waiting for one of those magnets to snap and fly off heh That thing was funny but a little sketch, especially later when they wound it up good... shaking like the day after... Knew when I saw the thumbnail that they'd delivered April fools in true garage 54 form once again.. and they don't disappoint regardless. I hope he keeps these original fabrications... the Lada experimentation is rather repeatable... these things are one of a kind.
After two months of failure and trying what you did in this video i have done it its real guys im running my housebon free energy but i added a few but rather not important adjustments and seen this works even without them thank you @garage 54 im running on pure eco friendly juice now.
Free énergies its ideas of ppl out of habitually rang like this magnet its from third world from ordinary employee guy, 😜 we got lot but we 🤐because they won to be the ingenious of new world
Unfortunately I think tons of people have tried and nobody done it legit. Without an external power source. It's always been a thing, trying to make "free" power is all it is.
So glad i didnt check the comments before it ended, i was fooled. I was thinking of all the potential to balance all the spinning parts. Ugh man you got me so good. So good.
I did this and variations of this back in the eighties, even went very far down the route of patenting the whole idea back in '99 but didn't follow through. I hit on making an engine when working for an avionics company called Muirhead Vestric, I actually used the insanely powerful magnets from a Harrier aircraft system motor and some very strong stainless steel rodding to make con rods and crankshaft and high expense jewelled bearings again from the trusty Harrier stuff. My patent covered also X and Y shaped configurations which could be modular bolted together to make multiples and used to replace petrol engines size for size. Had different concepts of air and magnetic bearings on the crankshaft preferring magnetic bearings for low friction and general air cooling with heat exchangers for anything that got very hot but my prototype ran perfectly for as long as one wanted, virtually no friction and just continual power motion.
Nie lepsze były by elektromagnesy na wale korbowym ? W silniku paliwowym ? Zwiększające moc momentu obrotowego ? Dzisiaj elektrownie odzyskiwania prądu, np w kołach, znają wszędzie, łącznie z Porsche.
Congratulations. You have achieved truly clean energy. I propose that you install this engine in a relatively medium-sized boat, because I believe that the propeller will have less resistance than an automotive transmission and you can regulate the forward control using a clutch so as not to have to stop the eternal movement of this wonderful ecological engine. Anyway, you have already made a dream come true and I congratulate you, thank you for sharing your adventures. Blessings to all!
@@gmspeedgarage3697 Nikola Tesla never had any kind of free energy, and he also never claimed it. He attempted to transmit electrical energy without cables through the air. Some mistake this project as free energy, which is false. The energy which would have been transmitted would have been produced in conventional power stations, oil, coal, water. But Tesla erred with this project, it never worked and can't work.
I always find it great when Government politics gets completely out of the way and the rest of us normal people from various countries get together and have fun inventing things. language and cultures usually mean nothing once all of us weird people get together and play to our heart's content. This was fun to watch. As a note, the universe itself is all electric at its base, so every configuration of invention ought to be pointed in that direction. An anti-gravity machine was already invented using magnets and it really does work. THAT'S where we ought to concentrate our energies.
Absoloutly brilliant.A great way to prove the concept, i Just had a thought, get TWO short block engine,s fix the magnets to top of original pistons, Make a Gasket / Spacer, Same thickness, as two magnets, Then mount the second engine on top, upside down, Linked by a chain,,, etc etc etc
I'm amazed by the fact that you didnt even make a simple cover for the "camshaft" and had so much faith in your weldind while passing by the cars parked 🤣🤣🤣
I designed a magnet motor that used shielding that moved across the top magnets instead of spinning the tops, actually worked but on an extremely small scale with only one cylinder, never got around to making a full size 4 cylinder,
Amazing... Magnets have the potential to revolutionize engine performance. One of the main advantages of using magnets is the ability to generate force without direct physical contact. This can reduce the friction that usually occurs between the piston and the cylinder wall, thereby extending engine life and reducing the need for lubrication. In addition, with precise magnetic field settings, the resulting force can be regulated with high precision, allowing better control over machine performance 🥇❤🇮🇩😘🥰
I kind of think it would work but it really works as I continue watching.You have a very smart clever mind.Good work and I'm waiting for for the completion of your fun but mind blowing project.
after couple of years, you guyz earn a sub for real. been watching ur videos since the old garage u had XD epic engineering - thank you so much for bringing this knowledge to us:):) keep it going garage 54 u guys are awesome.
I wonder if it would be possible with electro magnets? You wouldn't needs to have the magnets spinning when you're alternating the polarity electronically, and there would be a way to accelerate and decelerate the engine speed by adding/subtracting current.
Use electro-magnets set in place above the pistons to and run them from a distributor, and use a 'dial-controller' connected to the throttle to control voltage/current. theoretically it should allow for throttle control as well. using a aluminum engine block and heads as a base should help considering aluminum is non-magnetic.
@@travishartman5662 a few ways depending on the overall design. alternator/inverter, perhaps using a 'distributor' to 'fire' them off at the right time... maybe use solid state magnets for starters with electro for more power and to allow for acceleration. another would be a mechanical movement of solid state magnates in the head to bring them closer or further from 'pistons' to change 'power' levels... are just some ideas that popped in my head just now.
I remember a popular mechanics article from decades ago describing how to build a 'steam' locomotive for a garden train using push/pull electromagnets instead of a geared motor design.
I really like that thing. The only problem is that the force bringing the magnets together is equal to the force needed to separate them. You need some magnet-weakener-technology-that-does-not-use-too-much-energy when separating them to make it work.
Electric IS magnetic. They send electricity through copper/silver/gold/iron and produce a magnetic field which is aligned as to attract and repel in the most efficient manner to produce movement
I had a fantasy of something like this. What I imagined though was different. You already demonstrated that the 2 magnets can repel each other and be positioned somewhat like pistons. What I Imagined was First the magnets would be electromagnets and the sequence of their activation is controlled similarly to how spark plugs are sequenced. So when the electromagnet is activated, it one magnet would repel the another one which will act like the piston. It would be like an alternative way to propel an electric car, instead of being a perpetual motion device like this
Ok... what you need to do to make this work. Remove piston heads and replace with iron rods. Replace heads and place electo magnetic coils over each of the cylinders, with the iron piston rods going through the coil. Hook up each coil to the distributor in the same firing order as the spark plugs. So, as the distributor sends a spark during just past BDC, the magnet coil is activated, pulling the iron rod piston into the coil, then deactivates, while the next cylinder is pulled up, etc. Had this conversion in mind for decades but never pursued it . Try it.
Nice bro, you can directly of magnet, use more powerfull magnet, add more set ex : 8 set, than you can add coil in every outside silinder for induction that can power on your lamp.
Yeah worst part is when you watch it later and dont recall about it. Might be end of a year and still get fooled if it goes to suggestions or you watch the whole channel. Thats why i think there out to be warning label on videos made today that activates day after.
The thing is, a machine somewhat like this can actually work. There are certain criteria that need to be met to make it work, and even more specification to make it work well. Perpetual energy machines do indeed work. You just have to be careful.... Never put it out to the public. Certain enemies are always watching.
No it cant. The rotational force that this can generate is balanced out by the energy needed to rotate it, its working against itself it would never move on its own and even if you somehow broke the laws of physics and thermodynamics it would still completely fail as soon as you put a load on it.
Awesome comrades.😊now all that’s need it to completely change everything to an Electro Magnet Engine instead of what you have here in this video. With the above mentioned Engine you can alter speed and power based on how much Voltage and Current added. Awesome. Very good video😊
The idea is really great, we have recreated it, but only with a short stroke, so much less stroke but with larger magnets and we use it as a water pump, so as a drive for it. We don't have a Lada, maybe a Trabant, but that's too small for that.
This is idea is great putting a crankshaft which is a gravity system and putting together with a solenoid system . Magnets get more powerful when they are in sets one in top each other together with electricity and with a freezing system that Will make very more powerful. With a extra same thing like a gas to support or energized Stones like the space stones etc Almost like the space ship flying around the universe. Same Space ships are using a rotation system on a replying system ( electric stones from drc, magnets, vapor pressure, hidrogen, etc ) that what makes them more powerful
The laws of physics is what they say it is, we are so conditioned to accept what has been forced on us, we are so far back from the charge of the innovation charge of the 50's and 60's focusing on nonsense like string theory the topological quantum field theory. We are held hostage by limited physics in academia, funders wont allow us to get into innovative fields, with the secrecy act of 51, we are not allowed to prod in certain places, so when I read the hardest part is to hide the batteries, I get so sad, because we are conditioned to stop ourselves from imagining beyond the convenient laws of physics that has been surpassed in the 1950's by Nazi scientist. Your son is funded by same people who keep us captured and so am I.
I've always wondered if magnets work on trains when I was a kid. 35yrs later they're used on high speed trains in Japan. I see comments saying its a joke but if it was wouldn't they make it look heaps faster. Only thing I was wondering if it would last is plastic barrels and wooden frame aswell as the steel pipe.
This was a question of mine since 16 (1990). And stopping was always an issue but just like a brake pedal but it would separate magnets just enough to leave the field
A variation could be powerful solenoids on top of each cylinder, using essentially the same valve system as an ordinary combustion engine. One interesting fact is that magnets can produce more power than the energy required to shilf their poles.
Absolute Perfect "April Fools" - I Love it .. Big Thumb up for your Work.
attention seeking comment whorse ruined the ending
@@ShannonpdpHammond-yy7yh Yup they the same ilk as movie spoilers. Absolute Cnts.
"What's the problem? Stop already" 🤣 Love these guys!
And nobody ruined anything. It should have been *OBVIOUS*
Agreeed
So much work for an April's Fools joke. Much credit to this author
This is what we're looking for in America, innovation and determination! Bravo 👏
The dollar based on the value of oil, is also waiting for this
Wind up car with a key....or inertia driven like the tin toys we had when we were younger would be fun.....
It’s a bit worrying that some are taking this seriously 😬
First I thought "what a bullshit, this is impossible". Then I checked the comments and I realized its the first of April. Good joke. You got me.
maybe if you didn't stuff everything down deep, then you would finally become intelligent
What a bs lol
I was waiting for one of those magnets to snap and fly off heh
That thing was funny but a little sketch, especially later when they wound it up good... shaking like the day after...
Knew when I saw the thumbnail that they'd delivered April fools in true garage 54 form once again.. and they don't disappoint regardless.
I hope he keeps these original fabrications... the Lada experimentation is rather repeatable... these things are one of a kind.
THIS WHAT HAPPEN IN SIDE IN ELECTRIC MOTOR
So if you use that and make transmission with generator and use electric motor as power source you have your free energy driving machine?
After two months of failure and trying what you did in this video i have done it its real guys im running my housebon free energy but i added a few but rather not important adjustments and seen this works even without them thank you @garage 54 im running on pure eco friendly juice now.
Your channel?
The Oil Industry almost sent out a hitman...
Poor water engine guy.... I mean... I know nothing. 93 octane is the best! Vrooooooom.
Starter motor build again?
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
@@MrI8igmac Did someone build something out of a starter motor? I would like to see it.
❤❤❤ brilliant project congratulations ❤❤❤
To be fair, if someone was going to make a perpetual motion machine out of magnets and scrap, it would be these guys.
True. 😂😂
este motor teria mais redimensionamento numa carroceria de carro em fibra de vidro ( veículo Ret ) pequeno.
Kolo
Free énergies its ideas of ppl out of habitually rang like this magnet its from third world from ordinary employee guy, 😜 we got lot but we 🤐because they won to be the ingenious of new world
You cant make a perpetual motion machine out of magnets because magnets degrade over time. Same thing with batteries or spring under tension.
2:57 and I'm using my hand to prove I'm a badass slav who doesn't care if the magnet flips and breaks my fingers.
Something revolutionary + magnets + Garage54 = Aprils Fools
What exactly do you mean by "revolutionary"?
@@operator8014 imagine making an engine that doesn't need electricity nor gasoline to run, just magnets
Unfortunately I think tons of people have tried and nobody done it legit. Without an external power source. It's always been a thing, trying to make "free" power is all it is.
Would be illegal because the bitches don't get nothing to tax us on@@mindujiman
@@mindujimanyou end up dead if you try to mass produce it
It was still really cool to watch you guys build it👍
Another starter motor being tortured 😂
NO !!! its the same one still working xD
@@glitcher7574 Imagine if it is though 🤣
That's aLADA cranking!
@@TheLionAndTheLamb777take my like and get out of here, but Niva stop cracking such jokes!
The hardest part of putting this engine together is where to hide the real engine
So glad i didnt check the comments before it ended, i was fooled. I was thinking of all the potential to balance all the spinning parts. Ugh man you got me so good. So good.
You guy's can do just about anything you set your minds to do . brilliant ....
I did this and variations of this back in the eighties, even went very far down the route of patenting the whole idea back in '99 but didn't follow through. I hit on making an engine when working for an avionics company called Muirhead Vestric, I actually used the insanely powerful magnets from a Harrier aircraft system motor and some very strong stainless steel rodding to make con rods and crankshaft and high expense jewelled bearings again from the trusty Harrier stuff. My patent covered also X and Y shaped configurations which could be modular bolted together to make multiples and used to replace petrol engines size for size. Had different concepts of air and magnetic bearings on the crankshaft preferring magnetic bearings for low friction and general air cooling with heat exchangers for anything that got very hot but my prototype ran perfectly for as long as one wanted, virtually no friction and just continual power motion.
Of course you did.
Patented it and lost interest, yeah, I bet you did.
You think we believe you?
Of course, you can't be that stupid.
I trust you and I trust these people. They didn't even trust Nikola Tesla for wireless control.
Nie lepsze były by elektromagnesy na wale korbowym ? W silniku paliwowym ? Zwiększające moc momentu obrotowego ? Dzisiaj elektrownie odzyskiwania prądu, np w kołach, znają wszędzie, łącznie z Porsche.
It's true I was the bearing.
You achieved perpetual motion and didn't do anything with it? Yea, sure.
magnetic engine can work continiously and charge a battery unit. Then Car can go with battery powered electric engines.
Great thinking!
What if Magnet loses its magnetism ??
@@shobhitgautam7058 Then It has could a normal generator
@@PhantomSet that means you have provide a power source for it, so it's not a perpetual motion machine (PMM).
@shobhitgautam7058 what happens if the earth stops spinning? Lol😅
Congratulations. You have achieved truly clean energy. I propose that you install this engine in a relatively medium-sized boat, because I believe that the propeller will have less resistance than an automotive transmission and you can regulate the forward control using a clutch so as not to have to stop the eternal movement of this wonderful ecological engine. Anyway, you have already made a dream come true and I congratulate you, thank you for sharing your adventures. Blessings to all!
(April fools)
Hopefully you don’t actually believe this video
Really not shure if you being sarcastic, or just an idiot...
Nikola Tesla
@@gmspeedgarage3697 Nikola Tesla never had any kind of free energy, and he also never claimed it. He attempted to transmit electrical energy without cables through the air. Some mistake this project as free energy, which is false. The energy which would have been transmitted would have been produced in conventional power stations, oil, coal, water. But Tesla erred with this project, it never worked and can't work.
Quite a lot of work for this joke. Nice work, guys. If this was posted any other day I would have lost faith in this channel.
i almost forgot the date. you guys!!!!
I always find it great when Government politics gets completely out of the way and the rest of us normal people from various countries get together and have fun inventing things. language and cultures usually mean nothing once all of us weird people get together and play to our heart's content. This was fun to watch. As a note, the universe itself is all electric at its base, so every configuration of invention ought to be pointed in that direction. An anti-gravity machine was already invented using magnets and it really does work. THAT'S where we ought to concentrate our energies.
That was a prank well told. You really sold it to me with the magnet adjustment. Thanks for that laugh!
This guy has changed the future more than he can imagine!
Garage 54: "What the heck, we invent free energy and everyone thinks it's an April Fools joke. Oh well, throw it in the dumpster."
😆🔨
They're saving their skin, but we know what we've seen.
@@benjaminpeterson6974they r in russia. They can defend themselves better. From hitmen
@@GeneralChangFromDanang 🤣 you'd have to me very stupid th think it actually works.
@@Mattlawton-ft6ewyoud have to very stupid to think free energy isnt real in one way or another.. moron
Used it as power charger, then make an electric car. Great job 🎉🎉
Hopefully you solve the world problem about energy..
Good one! 😂 Try making a solenoid engine next, they do actually work!
I want to make one, using a proper ECU to drive it. Think it is possible?
@@MattBrownbillWhy would you need an ECU? They’re pretty simple I don’t think ones needed
@@MattBrownbill arduino :DD
@@MattBrownbill maybe, having adjustable timing may make it run better
Thermal dynamics my dude look it up
Thank you for that disclaimer at the end. You saved me a brutal take down of this "perpetual motion".
I love that you guys put so much effort into even a joke. But to be fair it this engine would be a really cool mancave piece.
Love these guys and the stuff they come up with. It’s like mythbusters but for cars and a fraction of the budget but still very entertaining to watch
I would have believed you if you hadn't done it last year! 😂
This guy gonna disappear soon
@user-cl7uc1un7f no he's not 🤦♂️ they faked it for April fools. It doesn't take a rocket physicist to figure out that this wouldn't work
@@RuairidhRennywhat are you talking about?
Absoloutly brilliant.A great way to prove the concept, i Just had a thought, get TWO short block engine,s fix the magnets to top of original pistons, Make a Gasket / Spacer, Same thickness, as two magnets, Then mount the second engine on top, upside down, Linked by a chain,,, etc etc etc
I'm amazed by the fact that you didnt even make a simple cover for the "camshaft" and had so much faith in your weldind while passing by the cars parked 🤣🤣🤣
Да это все свои машины
I designed a magnet motor that used shielding that moved across the top magnets instead of spinning the tops, actually worked but on an extremely small scale with only one cylinder, never got around to making a full size 4 cylinder,
Pity, don`t give up.
Don't give up
'Cause you have friends
Don't give up
You're not beaten yet
Don't give up
I know you can make it good
Peter Gabriel
I'd use this engine to power a generator. A few upgrades and you could probably run a entire house off it.
Dude what I was thinking too you could run your whole house off this thing
Definitely be able to run an alternator to provide 12 VDC to an inverter or battery set up. Free energy.
@@user-nineteen74it’s fake, free energy isn’t real also this video was posted on April 1st for a reason
dumbest fake shit lve ever seen
No
This crazy dude puts alot of effort into this .
biggest trick is that all this is real and is powered by Leprechauns
Leprechauns in tha' HOOD!!! Holla if you have seen the Leprechaun flute they found in the Ghetto.
Amazing... Magnets have the potential to revolutionize engine performance. One of the main advantages of using magnets is the ability to generate force without direct physical contact. This can reduce the friction that usually occurs between the piston and the cylinder wall, thereby extending engine life and reducing the need for lubrication. In addition, with precise magnetic field settings, the resulting force can be regulated with high precision, allowing better control over machine performance 🥇❤🇮🇩😘🥰
Definitely one of the better April fools jokes I seen today made me laugh good job Garage 54
I kind of think it would work but it really works as I continue watching.You have a very smart clever mind.Good work and I'm waiting for for the completion of your fun but mind blowing project.
You're calling for electricoboom territory lol
awesome fursona, it makes me smile to see more of us furrys out here in plain sight
No one got hurt here, so it can't be electroboom related.
I was trying to figure out how to tag him😂
@BeamerTheFox No. Just no. What's next, a transgender furry ? Might as well get all the stupidity out at once.
@@Matp345 just @electroboom
after couple of years, you guyz earn a sub for real. been watching ur videos since the old garage u had XD epic engineering - thank you so much for bringing this knowledge to us:):) keep it going garage 54 u guys are awesome.
I'm NOT falling for THAT again!!
This is a revolutionary idea, no more pollution or fossil fuels running out
APRIL FOOL BE A HINT
I wonder if it would be possible with electro magnets? You wouldn't needs to have the magnets spinning when you're alternating the polarity electronically, and there would be a way to accelerate and decelerate the engine speed by adding/subtracting current.
you basically described an electric motor
It's called a motor.
These guys must have had fun doing this! Awesome job fellas!
April fools day damn🤣🤣🤣🤣
🔥❤️🔥 I just love all the different experiments ❤️🔥🔥
Every year your april fools videos get better and better lol
Use electro-magnets set in place above the pistons to and run them from a distributor, and use a 'dial-controller' connected to the throttle to control voltage/current. theoretically it should allow for throttle control as well. using a aluminum engine block and heads as a base should help considering aluminum is non-magnetic.
So is Stainless steel.
@@johnt.848 who uses stainless steel to make a engine block?
Stainless steel engine block would also add a lot more weight to the project.
Where would they get the power from to operate that?
@@travishartman5662 a few ways depending on the overall design. alternator/inverter, perhaps using a 'distributor' to 'fire' them off at the right time... maybe use solid state magnets for starters with electro for more power and to allow for acceleration. another would be a mechanical movement of solid state magnates in the head to bring them closer or further from 'pistons' to change 'power' levels... are just some ideas that popped in my head just now.
If a magnet motor was able to be made in this fashion, Garage 54 would be able to do it im pretty sure. ❤ Happy April 1st
Wrap the cylinders in coils, wire them 12v parallel and set up a switch to reverse the polarity to stop it.
For a non-april fools version, have electromagnets on top and permanent magnets on the pistons
I second this, I wonder if it would make any power
@@dickbaum9137 Build one and find out.
Before I started watching I thought this was what they did
I remember a popular mechanics article from decades ago describing how to build a 'steam' locomotive for a garden train using push/pull electromagnets instead of a geared motor design.
Thought the same but that would make it a cool electric motor Im guessing.
I really like that thing. The only problem is that the force bringing the magnets together is equal to the force needed to separate them. You need some magnet-weakener-technology-that-does-not-use-too-much-energy when separating them to make it work.
Oh my god I fucking love this. They say electric has the most torque, but it seems magnetic is the true way to go
I wonder how electromagnetic would work 🤣
Okay I appreciate your enthusiasm but I wish you wouldn't use that fowl language, other people have to read your comment, including children.
Electric IS magnetic. They send electricity through copper/silver/gold/iron and produce a magnetic field which is aligned as to attract and repel in the most efficient manner to produce movement
@@TOONMAN200 What have chickens got to do with it?
Quelle équipe de furieux et quelle imagination, un vrai régal cette affaire.
Checks the date... Oh no.
I had a fantasy of something like this. What I imagined though was different. You already demonstrated that the 2 magnets can repel each other and be positioned somewhat like pistons. What I Imagined was First the magnets would be electromagnets and the sequence of their activation is controlled similarly to how spark plugs are sequenced. So when the electromagnet is activated, it one magnet would repel the another one which will act like the piston. It would be like an alternative way to propel an electric car, instead of being a perpetual motion device like this
The hardest part of making a prepetual motion machine is hiding the batteries.
Nice copy and paste.
Your fear is free energy
Excellent gag!
Ok... what you need to do to make this work.
Remove piston heads and replace with iron rods.
Replace heads and place electo magnetic coils over each of the cylinders, with the iron piston rods going through the coil.
Hook up each coil to the distributor in the same firing order as the spark plugs.
So, as the distributor sends a spark during just past BDC, the magnet coil is activated, pulling the iron rod piston into the coil, then deactivates, while the next cylinder is pulled up, etc. Had this conversion in mind for decades but never pursued it .
Try it.
You are crazy
This video is posted april 1 does that tell you something?
Bro made a perpetual motion machine.
Allready knew what this was gunna be even before clicking on video lol
Nice bro, you can directly of magnet, use more powerfull magnet, add more set ex : 8 set, than you can add coil in every outside silinder for induction that can power on your lamp.
Waiiiiit a minute. Haven't watched all the way through yet. It's april fools day. Damnit. I feel like I'm gonna get fooled.
Yeah worst part is when you watch it later and dont recall about it. Might be end of a year and still get fooled if it goes to suggestions or you watch the whole channel. Thats why i think there out to be warning label on videos made today that activates day after.
I've been searching for something like this out of curiosity and now I so happened to stumble across this video. Yay
Add copper around the cylinders to make electricity at the same time.
Brilliant idea and concept...I see big future for this technology
The thing is, a machine somewhat like this can actually work. There are certain criteria that need to be met to make it work, and even more specification to make it work well. Perpetual energy machines do indeed work. You just have to be careful.... Never put it out to the public. Certain enemies are always watching.
Nonsense. It violates the second law of thermodynamics
No it cant. The rotational force that this can generate is balanced out by the energy needed to rotate it, its working against itself it would never move on its own and even if you somehow broke the laws of physics and thermodynamics it would still completely fail as soon as you put a load on it.
The best April fools video I’ve seen this year
I wonder how many people fell for this... Sadly, i'm sure there's a lot....
😄😅🤣
It says what will happen
These guys are incredible. The video I was searching is this
I love your channel but free energy is just a dream 😂😂😂😂😂❤❤❤
I love this channel I’m always amazed with what you guys build
Alternative Braking Methods can be fun ! haha. What an Awesome Idea that I'm sure can be massively improved.
I really Love This Channel and These Guys 😂
I wasnt expecting the torque, nice one!!
The fact it even works is hilarious.
Great job guys this is genius.
Might need a little work on the brakes lol
Nice for a prototype
Awesome comrades.😊now all that’s need it to completely change everything to an Electro Magnet Engine instead of what you have here in this video. With the above mentioned Engine you can alter speed and power based on how much Voltage and Current added. Awesome. Very good video😊
I thought of things as a child but have never had a way to manufacture it. This is a real perpetual motion machine.
😂😂😂
@@muzokhonazulu4202 yes, I know the video was a prank. 😆
CONGRATULATIONS !!! Great Work
You fooled my grandpa with this one.
hahaha You guys are awesome. Thank you for brightening up my day
The idea is really great, we have recreated it, but only with a short stroke, so much less stroke but with larger magnets and we use it as a water pump, so as a drive for it. We don't have a Lada, maybe a Trabant, but that's too small for that.
This is idea is great putting a crankshaft which is a gravity system and putting together with a solenoid system .
Magnets get more powerful when they are in sets one in top each other together with electricity and with a freezing system that Will make very more powerful.
With a extra same thing like a gas to support or energized Stones like the space stones etc
Almost like the space ship flying around the universe.
Same Space ships are using a rotation system on a replying system ( electric stones from drc, magnets, vapor pressure, hidrogen, etc ) that what makes them more powerful
I can’t believe he’s just standing there when he puts a crowbar in. It looked like it was gonna flip at the very least.
I appreciate his creativity more than ridicule him
Funds drying up, next, glass bottles as pistons.
Mind blowing, a different approach.
This channel never ceases to crack me up.
This actually works when built correctly
And red Mercury as gasoline with electric current 😅❤
I tried to explain this my scientist son… he laughed me out of the room, and right he was.😂
The laws of physics is what they say it is, we are so conditioned to accept what has been forced on us, we are so far back from the charge of the innovation charge of the 50's and 60's focusing on nonsense like string theory the topological quantum field theory. We are held hostage by limited physics in academia, funders wont allow us to get into innovative fields, with the secrecy act of 51, we are not allowed to prod in certain places, so when I read the hardest part is to hide the batteries, I get so sad, because we are conditioned to stop ourselves from imagining beyond the convenient laws of physics that has been surpassed in the 1950's by Nazi scientist. Your son is funded by same people who keep us captured and so am I.
Good magnetic powered engine. Good work brother.
I've always wondered if magnets work on trains when I was a kid. 35yrs later they're used on high speed trains in Japan. I see comments saying its a joke but if it was wouldn't they make it look heaps faster. Only thing I was wondering if it would last is plastic barrels and wooden frame aswell as the steel pipe.
That can really work and be more powerful than gasoline, quieter than electric and free what da!
Can you magnet for car suspension for us to see the outcome?
Well done guys 🍻
This was a question of mine since 16 (1990). And stopping was always an issue but just like a brake pedal but it would separate magnets just enough to leave the field
A variation could be powerful solenoids on top of each cylinder, using essentially the same valve system as an ordinary combustion engine. One interesting fact is that magnets can produce more power than the energy required to shilf their poles.
least physics breaking garage 54 video
THE PRANK is that the engine actually worked !