I was doing reverse cookies with mine last night. Then the Mosquitoes went on the warpath and I had to run for cover. Can't wait to see what upgrades you have planned for yours
Thanks for keeping it real. Your videos are great. Slow mo on the load flying off the bed was crazy cool. I would be the first in line if Traxxas put a fifth wheel where the bed is and made a Tractor Trailer version. I know...too crazy.
I like the cab but would change the bed to a overland look. Shorten the overhang in the back and the it would be a pretty cool crawler-ish truck. Thanks for the vids. Keep it up Joe. Greetings from the Netherlands
Looks like it may need a little weight up front. I wonder if a shorty lipo pack would be enough to keep the front planted a little better. 6x6 donuts was awesome
I am still waiting on my pro! Hope by ordering through your link it helps you out!! But come on Hobbywing I am ready to try this new fusion pro !!! Great video Exo
1:20 u could probably slide that servo a little right, extend the link, and have room for an extra battery also are there any fusion motors you would recommend for monster truck driving as well as occasional crawling
The slow Mo passages are awesome How it sound during donut ! How can you made such unstrapped capture where you have a wheel bump off the flatbed and just roll side by side with middle axle. Perfectly synchronized and totally freely Yes it's just 2 moments, but what moments! Just the dose of fun without looking at destroying like a Kev.... You mentioned sometimes do and disturb me. This is the right dose in your vids. Crawling. SlowMoling, Jumping, Trailing, Driving,enjoying!🤪
@@ExocagedRC yeah dude, that was epic. I was looking at the new Fusion for one of my crawlers but sadly discovered it won't fit by 1mm. 1mm!! That sucks lol
🤣🤣🤣👍👍 dude you’re crazy, I guess that’s why I love your videos. That was outstanding dude specially slow motion nothing strap down love it you know I appreciate you sharing yeah i’ll be here watching more 👍👍😎
Awesome video, thank you for all the work you put in, making videos! When I get up I’m glad that there is a new video to watch. I’m fairly new to the hobby so you have taught me and shown a lot of different vehicles and how they work. Thanks again happy 4 of July
Hey great video. I've done the same conversation on my TRX6. The lights plug has me a little worried about connecting 3s battery directly to them very thin wires.
Nice! I just got one of these in a trade traded my Rc4wd desert runner for one it’s absolutely massive compared to my cross rc 6x6’s can’t wait to see what it can do and to start customizing it! Also kinda random but you kinda remind me of Neelix from Star Trek Voyager 😂
Can you answer me a question? Are the frame rails on this the same width as the Mercedes trx 6x6?? Trying to figure out if the trx 6x6 bumpers will fit the hauler! Thanks
When you installed it was forward making you drive in reverse? I just put one in my 6x6 Benz and I can't make it go forward with the trigger pulled (stock controller)
Definitely one of my favorite TRX6 videos I've come across. Why? Because I would have done the same exact things you did. lol Keep up the great videos dude. Love it!
Out of the box mine got a shift xb servo mamba x 3300 roc412 and a bec then rock lights light bar on the rack and ditched the diff servos and got lockers for all 3 axles.so far it's a pretty sweet truck
I like the selectable diffs. Turns so much easier with them open but I can see making it simpler. Great power choice as well. I may try a Tekin RX4 in this one
Was thinking about doing this with mine with a brushless system was just wondering being the stock motor runs in reverse do you have to change anything with the gearing to run up in a different direction
Bro you just popped up in my likes but anyone that’s gonna throw a brushless system in a hauler and then slow motion jump it gets a like and a sub from me, looking forward to seeing what’s next 👍
You know Joe...I literally had alot of disdain for HW at first being a huge supporter for Castle and Holmes-Hobbies. But they won-me-over with the Fusion...the FOC does a good job of masking the lack of actual torque-density compared to Holmes Puller Pro's and Revolver's. I really believe Holmes has lost alot of customers not putting a strong BEC on his Crawlmaster Mini's and making them RTR...because I'd love to have the torque-density from the outrunners without the noise and the FOC(that the mini also has)but I'm not wiring-up a BEC. I did that for 15 years and it's absolutely unnecessary with technology today...that was such a pain and made for very ugly wiring. I have well over 20 Holmes motor but now have 3 Fusion's and looking to get the 2300 in the future.
You know we are working on that, biggest problem is being USA based and having 2nd chair to china based companies for parts (where the raw parts are made). The DC-DC converter we want to use only has a 62 week lead time right now.... Wait for that part and have nothing on the shelf for year to years, or offer something that works well for customers willing to support us while we develop from scratch? The unfortunate part is that customers lost due to China's directive to supply Chinese companies first only reinforces the market share of said companies.
@@HolmesHobbies thank you for replying. I've ask that same question many times on your Instagram and haven't gotten one. I've promised from the beginning to slowly replaced the Castle esc's with Crawlmaster once they have the strong BEC's and I'm going to do it. I still support your product. I have for 10 years now...probably have 12 or so Puller Pro's and the same with Revolver's and three servos.
Thank you for testing the Fusion Pro on the TRX6 just what I needed to see.
It did great
I'm here for the same reason, thought it would overheat due to the small for factor. Very impressive.
And that’s why you never drive with an unsecured load!! Great video 👍🏻🍻
LoL I had to let ‘em fly! 😂
@@ExocagedRC I know you did 😄
Mine just showed up at the hobby shop. Going to pick it up Saturday morning. Can’t wait
I was doing reverse cookies with mine last night. Then the Mosquitoes went on the warpath and I had to run for cover. Can't wait to see what upgrades you have planned for yours
Thanks for keeping it real. Your videos are great. Slow mo on the load flying off the bed was crazy cool. I would be the first in line if Traxxas put a fifth wheel where the bed is and made a Tractor Trailer version. I know...too crazy.
Not too crazy... Maybe expensive but if they made it is buy it...
I like the cab but would change the bed to a overland look. Shorten the overhang in the back and the it would be a pretty cool crawler-ish truck. Thanks for the vids. Keep it up Joe. Greetings from the Netherlands
Yeah could put a big camper shell on there.
That rear tire flex as it's going up the steps is legit 👍
Always enjoy the Traxxas content. Your enthusiasm with RC is fun to watch. Like button engaged.
Awesome man thanks!
I run some of the 1800kv fusions and it's surprising how much difference 500kv actually makes,
Great video Joe 👌
I KNEW IT!!! I knee u were a crazy motorcycle when I first subscribed. U are the first rc channel I've seen doing doughnuts with a 6×6, goddammit
Schöner Regler , der kann was. und echt schöne bilder die er gemacht hat, Bravo!!
Me too, I would have fun being in your place with this kind of RC, don't give up, you make a very good video, thank you
That was awesome the big dirt hill climbed right up and over cool
Looks like it may need a little weight up front. I wonder if a shorty lipo pack would be enough to keep the front planted a little better. 6x6 donuts was awesome
Weight will happen soon.
I am still waiting on my pro! Hope by ordering through your link it helps you out!! But come on Hobbywing I am ready to try this new fusion pro !!! Great video Exo
Awesome. If you ordered direct hope you used the discount code for 10% off.
@@ExocagedRC yes sir thank you for that 👍. So excited for it to come
Wow. 💯👍 Thank you for this amazing video 🎦
Awesome moments captured and good testing ground.😎
1:20 u could probably slide that servo a little right, extend the link, and have room for an extra battery
also are there any fusion motors you would recommend for monster truck driving as well as occasional crawling
The fusion doesn’t have a drive brake reverse feature so it would be crawler mode all the time
@@ExocagedRC I mean I kinda want instant reverse for an mt for saves and moonwalks and whatnot
Love this fusion system gotta get me one for a six wheel independent vehicle I'm working on!
Now I am convinced, I'm getting a few of these!!!! Great vid EXO!!!!👍👍😄
Dude you rock! Nice work man!
Thanks!
That truck is insane. Really really cool stuff.
I love how obnoxiously large this rig is, haha. Very cool.
The slow Mo passages are awesome
How it sound during donut !
How can you made such unstrapped capture where you have a wheel bump off the flatbed and just roll side by side with middle axle. Perfectly synchronized and totally freely
Yes it's just 2 moments, but what moments!
Just the dose of fun without looking at destroying like a Kev.... You mentioned sometimes do and disturb me. This is the right dose in your vids.
Crawling. SlowMoling, Jumping, Trailing, Driving,enjoying!🤪
Looks as though that Fusiom system was made for that truck, epic mate! 👍
It worked out really good
@@ExocagedRC yeah dude, that was epic. I was looking at the new Fusion for one of my crawlers but sadly discovered it won't fit by 1mm. 1mm!! That sucks lol
🤣🤣🤣👍👍 dude you’re crazy, I guess that’s why I love your videos. That was outstanding dude specially slow motion nothing strap down love it you know I appreciate you sharing yeah i’ll be here watching more 👍👍😎
Handles very well and nice suspension 👍👍👍
I would bet this would have been your first upgrade !!
Next week I should get mine and I'm thinking about same upgrade...😉
Wicked vid.
Best traxxas 6x6 vid yet
Fantastic! Love the two in one!
Purple Lego RC
I got the same setup. Unstoppable and just a dominator on all terrain.
I just bought that motor/ESC combo for my Element Gatekeeper.
So much for not beating this truck up lol 🤣🤣🤣👊🏽
I only rolled it once in the grass. LoL
You get to do stuff with your RCs that I never will be able to mine . Cool !
Awesome video, thank you for all the work you put in, making videos! When I get up I’m glad that there is a new video to watch.
I’m fairly new to the hobby so you have taught me and shown a lot of different vehicles and how they work.
Thanks again happy 4 of July
Good video man! Always count on you putting more power into a rig.
The best crawler video i ever seen👍👍✌️✌️ greetings from switzerland
Man!! That is freaking awesome 😁👏👍
Great Video. those fusion 2300kv are great, got one in my TRX4 Defender
To be honest... i havent had my ming like that in a long time. Thats something id put my name on. Love the vid man
U bent the Chassis..lol..also got a torque steering servo👍...good job..🧑🔧🧰
Another great video. I would like to see the fusion pro in the vanquish phoenix to see how it would handle the overdrive.
It would work that just fine I’d think
Because of you know, I will have to buy a phoenix and a fusion pro. :p
Man I wonder if red cat's going to release the ax again with that system in it that thing would be awesome axe 2.0
this test so great, the fusion running so great low gear and high gear, awesome 😀👍👍
Hey great video. I've done the same conversation on my TRX6. The lights plug has me a little worried about connecting 3s battery directly to them very thin wires.
Let's gear it up!! With that wheelbase it's gonna love some straight line speed. Just watch those temps ;)
I used to drive a 300hp Cummings 30' International box truck just like this 🤣 frfr people got some crazy driveways
I 4got to ask Joe. Is this setup like the regular trx6 (all the extra micro/mini servos), or like a basic trx4?
Same as trx6 just longer
I wonder how a vanquish vfd trans would be in that....2wd and selectable overdrive would be awesome!🤘
I’d like to see a 2wd option on this.
😂 "I was so happy, now I'm so sad" 😆
😂Awesome video! Haven’t seen one in person yet. Is it big enough to be 1:10 scale? Or is the cab closer to the size of a Tamiya big rig?
Are those motor esc combos just for crawlers?
Yeah these are
This things a beast. I wonder how fun it is in the snow ❄️🌨️❄️🌨️
Very cool. How did you get one so quick? I'll haul around my Hot Rods on it when it comes out.
Oh yeah not too many people will be doing donuts by that unless he’s related to you 🤣🤣👍👍😁😁 Again appreciate you sharing, I’ll be following for more
Nice! I just got one of these in a trade traded my Rc4wd desert runner for one it’s absolutely massive compared to my cross rc 6x6’s can’t wait to see what it can do and to start customizing it!
Also kinda random but you kinda remind me of Neelix from Star Trek Voyager 😂
Your laugh is gold😅👌
Can you answer me a question? Are the frame rails on this the same width as the Mercedes trx 6x6?? Trying to figure out if the trx 6x6 bumpers will fit the hauler! Thanks
When you installed it was forward making you drive in reverse? I just put one in my 6x6 Benz and I can't make it go forward with the trigger pulled (stock controller)
Definitely one of my favorite TRX6 videos I've come across. Why? Because I would have done the same exact things you did. lol Keep up the great videos dude. Love it!
what do you end up doing with all of your RC cars?
Have you hooked the lights up yet?
Are you going to change the wheels and tires anytime soon. What would you recommend?
About 2 drop 2 videos of the comp this week 👋🌍📢Upgrades wow always the 1st buddy keep up the grate work
Your truck is beautiful
I wish i could find the 2300kv in stock in the states anywhere no one seems to have them.
With great power comes no responsibility lol 👍
😂😂
Mine is extremely stable. Surprised me big time
Testing is very important/fun! 👊👍👊
So are saying that there is no separate ESC required?
HW Fusion Pro moves that rig good
now i understand its price range, performance is so impressive.
Sweet vid ! Congratulations on 50k subs!! What are the dimensions on the bed? Be sweet if it tilted 👍🏼💪🏻
Will this motor increase battery run time?
Super cool donut love it
Out of the box mine got a shift xb servo mamba x 3300 roc412 and a bec then rock lights light bar on the rack and ditched the diff servos and got lockers for all 3 axles.so far it's a pretty sweet truck
I like the selectable diffs. Turns so much easier with them open but I can see making it simpler. Great power choice as well. I may try a Tekin RX4 in this one
Was thinking about doing this with mine with a brushless system was just wondering being the stock motor runs in reverse do you have to change anything with the gearing to run up in a different direction
Still on stock gearing I presume?
6s the rc hauler?👀
Great video man. I just wish the flat bed was functional
Does it work with pro scale light kit
"testing". Haha. I like it
Wow !! Nice video!
What gearing are you running
Ha thats some fun man.. its any cheaper tow truck out there? 600 too much but i want one
Класс! Интересно какой ресурс к мостов бкдет с таким мотором?
what's size for your brushless motor?
It says 540 spec but it’s 550 in size
"Boss i lost the freight"! Ha ha ha! Hmmm bigger tires front more wheelbase third axel and bigger tires rear.
What esc you use for it
now its perfect how much iscthe max for heat dude for brusess engines just about
how much heat temp max for brushless engine about how much
Bro you just popped up in my likes but anyone that’s gonna throw a brushless system in a hauler and then slow motion jump it gets a like and a sub from me, looking forward to seeing what’s next 👍
maybe try an outrunner - for some hauling power
It does good like this though
Do you think I could haul a stampede on it
You know Joe...I literally had alot of disdain for HW at first being a huge supporter for Castle and Holmes-Hobbies. But they won-me-over with the Fusion...the FOC does a good job of masking the lack of actual torque-density compared to Holmes Puller Pro's and Revolver's.
I really believe Holmes has lost alot of customers not putting a strong BEC on his Crawlmaster Mini's and making them RTR...because I'd love to have the torque-density from the outrunners without the noise and the FOC(that the mini also has)but I'm not wiring-up a BEC. I did that for 15 years and it's absolutely unnecessary with technology today...that was such a pain and made for very ugly wiring.
I have well over 20 Holmes motor but now have 3 Fusion's and looking to get the 2300 in the future.
You know we are working on that, biggest problem is being USA based and having 2nd chair to china based companies for parts (where the raw parts are made). The DC-DC converter we want to use only has a 62 week lead time right now.... Wait for that part and have nothing on the shelf for year to years, or offer something that works well for customers willing to support us while we develop from scratch?
The unfortunate part is that customers lost due to China's directive to supply Chinese companies first only reinforces the market share of said companies.
@@HolmesHobbies happy you do what you do and will gladly wait as long as needed for more of your wonderful products. Thanks John for everything
@@HolmesHobbies thank you for replying. I've ask that same question many times on your Instagram and haven't gotten one. I've promised from the beginning to slowly replaced the Castle esc's with Crawlmaster once they have the strong BEC's and I'm going to do it.
I still support your product. I have for 10 years now...probably have 12 or so Puller Pro's and the same with Revolver's and three servos.
What pinion do you run with 2300kv Fusion combo?
Thanks
You should do servo on axel on the front
So that's a sensored motor??
Yeah it’s all built together as one unit
Awesome.
Awesome seeing it climb the stairs etc 🔥 Motor ESC combo seems to work really good 👍
Awesome vid Exo 🔥👍✌️
Really nice rc car
I would've went with the 3300kv 550 Axe. Make it a super beast
I have that combo and that may go in but I really like the crawl and control it has now with the 9t. The smallest I can go with the 5mm bore is 11t