Making Jimmy’s Tool Box
HTML-код
- Опубликовано: 25 ноя 2021
- Get My 27 Plan Bundle Here: rlnk.cc/27plansfrankmakes
I have been challenged by Jimmy DiResta, for our Maker Mob maker challenge, to make Jimmy's bandsaw toolbox with my own take on it. Watching Jimmy make his bandsaw toolbox, I thought, wow! he's making a CNC project on the bandsaw. So my first thought was to make the joinery and the parts for his toolbox with the CNC. I drew up a set of drawings that I could cut out on the CNC and I cut out all the parts and amazingly they went together. I guess I was following a good design. At the bottom of the toolbox, there is a drawer that can slide out of each side of the toolbox. I thought it would be neat if that drawer was on a rack and pinion system so you could turn a knob on the side of the toolbox and have the drawer open to either side of the toolbox depending on the direction you turn the knob. I made the toolbox out of the salvaged pine I got from an auction a few weeks ago and I made the gears and the drawer at the bottom of the toolbox out of some cherry I got from a neighbor a few years ago. The toolbox will be my new glue tote and I will fill it with all of the things that I need when I glue a project together. This will be really nice to have all of these items in one place
Tools used in this project can be found at
www.frankmakes.com/
CNC: www.cncrouterparts.com
To see upcoming projects follow me on social media
Patreon
www.patreon.com/user?u=16151185
Instagram
frank.howar...
Twitter
/ frankhowarth
Facebook
/ frankmakes 
Хобби
I was smiling the entire time!! loved the line you said .. "I make stuff so precise if the last part fails I have no project"
🤣🤣🤣🤣 love and respect!!
Frank took the your own "spin" on it challenge literally.
I'd like to say the same about my precision... I think my problem lies more in my lack of skills than in my set of skills though 🥲
hahaha i love that too, i do the same thing EVERY time! hahaha
But he wasn't saying anything about precision.
I love it when it just works! That was fun!
When the first try prototype fits together perfectly. You know you’ve come along way in the CNC universe. Frank I don’t comment much here but I watch everything you do. This was fantastic. always love to see how your mind works sir!!
HELP!!! Everybody at my school cyberbullies me because they say me good good GOOD videos are extremely BAD!!! Please help me, dear ag
@@AxxLAfriku na 99
Drinking game: Take a sip every time Frank does his little chuckle.
Great work Frank. I should have subscribed sooner.
🍷🥴
ha ha!
@@frankmakes drink :)
That two note, "I'm very silly" laugh! That shame of it is that he's getting so good that this, he's very silly less and less often.
Drawer goes in, drawer goes out
Jimmey DiResta: Makes something that looks cool.
Frank Howarth: Makes something that is cool.
incredible!!! Thank You Brother what an honor!
The Orignal RUclips MAKER makes a project of mine😊😊😊😊
Thanks you for the great design.
There should be a way to use the wood grain as a visual "fingerprint," mount a camera on the ceiling or the CNC gantry itself, take an image of the wood grain at three points, and then if you take the piece off and put it back on the table, the camera can find those reference points and adjust the gantry's coordinates to allow for any changes. That's more a coding issue though, something more appropriate for Stuff Made Here.
i love how Frank, an expert, still learns new stuff about the craft on every project. Protect this man at all costs
never too good to get a lot better.
@@frankmakes Amen !
Incredible work! Only thing I wonder about is - because the shaft for the gear extrudes "into" the bottom of the box - won't it make the objects laying in it move around ?
Seriously 👍
@@Nissimus my impression is the shafts sit below the drawer (and not thru the storage section) so it should be fine noh?
Perhaps I am picking up more of your tips and tricks of the CNC machine and you've always done it, but I appreciate you taking the time to explain the importance of the tolerances between the rough pass and finishing pass, as well as showing how to deal with the end chips when cutting the pins! Great video as always, I always learn something!
Wow. Thanks for this. Unreal what you guys can do.
I love simple projects that are made needlessly complicated! That's not sarcasm... I really do love it!
I love watching people that have done the work so seriously, so detailed, and with such love that it is almost magic to see what it is they make and how they make it.
Your little chuckle makes me laugh 😂 great content!
Great job Frank. You never cease to amaze me.
Frank, you are a highly creative person. This is an excellent project, and your detailed description of your thought process and how you handled issues was super educational. Thank you.
That is so nifty, Frank. Congratulations. Maybe some wax on the gears and drawer slides will aid in keeping things running smoothly?
I don't think I deserve to think that I can give you an idea. Your engineering skills have fascinated us for years. My son and I have a 4x4 CNC table. Our projects often are larger than 4x4. We drill an index hole at some point then when we move the large sheet we re-zero to that hole. When your drawer slipped having an index hole or two might help realign your piece. I humbly submit my comment. We love your videos.
This is so cool! I wonder what would happen if you forwarded the challenge to someone else in the Maker’s Mob so they can add on to Jimmy’s and yours designs?
I’m pretty sure once you get through everyone, the Toolbox will be a sentient being.
Good idea!
All it would need to become sentient, is pass it to Matthias.
@@anathaetownsend1894 which Matthias is that?
@@andrejohnson6731 Wandel. He will do his magic with a RasperryPi computer.
@@gus23a that is correct.
Your CNC tips are so incredibly helpful! Thank you!!
After so many years watching your videos, I realized I've never ever fast forward them, not even 10 secs.. your content is amazing! Greetings from Argentina 🇦🇷
Such an unbelievably over engineered project. And I absolutely loved it! Go big or go home.
I'm very interested in linguistics and always jump at the opportunity to learn industry jargon. I have been a machinist for a long time yet these terms precise definitions were new to me until I was recently enlightened by a viewer on another video. On the off chance that you have the same interest, I'm going to share what I learned. A gear by definition, transfers force by use of its teeth. A rack is just an infinite gear. The consideration of using dowels sort of like DaVinci's gears, would technically be cogs. Apparently, a cog by definition transfers force by use of the spokes. It is irrelevant to the definition if the spokes are on the circumference or at 90° to the circumference. There is also such thing as a cog rack. If you can imagine for example machine chain being used as the track for sprockets to walk along it, that would be an example of a cog rack. Maybe this is meaningless pedantics to you, but I was very happy to learn the information so I decided to pass it along
Frank, I love it. Once again you managed to combine art, ingenuity, and craftsmanship, transforming the mundane toolbox into a unique expression of Frank. Nice.
I would consider this project but I don't have a lathe to sand my dowels lol.
Nicely done Frank! Next time you are cutting tenons (pins) in the endgrain of a board use a clockwise profile with an upcut spiral around the perimeter of the board. Center the bit ON the vector outline of the board, or slightly farther out if you have a narrow shoulder. This will leave a clean shoulder with no tearout. All following cuts around the tenon(s) can tearout but will be clean when down to the shoulder.
4D
I was wondering if an up cutting bit would be better. My test piece, that I did not show in the video, got shredded. I was using a 1/2" down cutting bit.
@@frankmakes I use 1/4" diameter spiral upcut bits unless the tenons are longer than the 1" cutting edge. I do the outer clockwise profile to make the shoulder then can usually follow up with profile cuts around the tenons. If there is more shoulder to cut down to I create pockets around that area then cut it. I also usually leave -.003 allowance between the tenons (smaller) or the mortises (larger) they fit in. Same vectors outlines for each just copied to the mortise job. Usually that gives a good slip fit with room for glue if my bits are the diameter they claim to be.
4D
Always something to get the gears turning. Fun take on the classic tool tote, and definitely has your fingerprints on it. Thanks for sharing!
Your lo lovely laugh always makes me happy Frank 🧡
FRANK YOUR A GREAT GEAR HEAD.LOL LOVE THE BOX .FROM DOUG😀😀
Frank you can CRUSH this little job
Awesome, Frank. Very cool!
You didn't disappoint Frank 👌👍
Challenge Met 👍👍
Very cool. Thank you!
Jimmy: "I made this really cool band saw tool box"
Frank: "Hold my gear"
Ah, Frank, I enjoy your videos so much! Your sharing of your thought process, the follow-through, and execution, your relief when the whole thing works are educational, humorous, and endearing.
Thanks for sharing a bit of your world.
👍🏾 This is our generation's Leonardo da Vinci. Fantastic.
I'm with Chris from "A Glimpse inside". Long time watcher as well. And a big fan. And everything else Chris said I totally agree with. Thanks for another great one Frank.
Great Job!
this is insane. insanity level - Izzy. in a good way, ofcourse. and a whole lotta CNC tips. Thanks!
Wow!
Very nice work.
Love the box. Maybe putting some covers on the inside gears to protect them from screws and other small parts that would inevitably land in the tote might help
Just amazing
Jimmy: make a tool box on the CNC
Frank: 😂 hold my 🍺
Awesome!! Love everything you do!!
I love this idea Frank! Well done
Nice job, Frank!
Frank you are on another level. I really really enjoy watching your projects.
Frank, love your stuff. That was one bit hen build. Thanks for taking Jimmy’s challenge, I think you out did yourself and took it to the next level. Thanks for doing what you do.
Love this!
Great toolbox, Frank. I like your CNC tips and advice. Eat your heart out, Jimmy.
Bill
That is really cool. Now everyone has a real reason to get a CNC router. To be like Frank. Sometimes tool technology comes along before the project design innovation has caught up. With this box, design innovation has now put the ball back in the CNC maker's court. Well done!
Super nice, thanks for sharing.
13:25 I was expecting a Diresta icepick tbh
3:28 - Two table saws together as a work table = "mind blown" emoji 🤯 !!! Go Fred
I love this channel, I subscribed to hundreds, but any time I see a Frank Howarth video pop up, I wait... I wait for the muse... I wait until I am in a state of relaxation, where I can sit down uninterrupted, and enjoy the entirety of it from start to finish... An immediately after, I scurry out to my shop, and plan my next ambition. Thanks for being and inspiration and a mentor..
I smiled at your explanation of excellence at the end about precision. It's the thought process of a great thinker. Great job!!
So cool. I also look forward to catching glimpses of this in future videos when a glue-up happens.
looks great!
Well executed!
Great job. You make it look so easy, a master craftsman at work.
Absolutely fantastic Frank…..genius at work 👍🇬🇧
Another awesome video!! Thank you!!
What an absolute pleasure it is to watch you at work. I am blown away at how intelligent you are and how your visions come to life. Thank you ever so much for allowing us into your shop and watch you at work . Merry Christmas from your number one 🇨🇦 fan .
Really creative twist on the Diresta build. Great video!
Fun piece!
Hi Frank just brilliant , thanks ,G.
That is immensely satisfying.
Awesome work, as always.
Your projects with mechanisms always make the best videos! I like hearing about your lessons learned too, makes me feel like I learned something as well.
A very interesting adaptation to someone else’s design. I like it. Very cool.
Ah - you got the countersink bit I recommended... Nice! 😉
So cool!
Very cool project.
Franktastic, nice job, really cool gear
Love it!
great job Frank
I love colaborations and challenges :)
Delightfully overthought. Well played, sir!
I love the cnc projects!
Fantastic project, sir.
*- Would bee's wax make the drawer slide better?*
*- What about bee's wax for the gears and spindle so water can't make things swell?*
Very nice Frank.
I know I'll never own a cnc machine.
I know I have no patience for computer programs.
But I know I enjoy watching you make your projects Frank.
The Swiss watch of tool boxes! Nice video.
well done! can't believe this works, required insane precision.
Amazing 😊
What a totally amazing video. I've watched it 3 times now, totally superb. That grab handle is wonderful. Those gears could power my life and then some... 😁😁. Love the last step is critical. Absolutely lives up to the challenge sir. 👍👍
Love the movement of the bottom drawer! Now to finding a clever way to never eject the drawer unless you meaningfully want to disassemble the box. Maybe there is some room under the drawer as a cut out that some stops can be placed in V2. So there is a hidden pocket that drawer has with 2 different sets of stops. If you can hold off from installing one of the lengthwise panels until the drawer is seated, then the side can be added as one of the final steps.
Outstanding....
That's one sturdy toolbox
Since your using the tote for glue up items, I would be worried that glue might drip on the interior dowels and gum up the works. Maybe a false bottom or covers for the dowels would be a good idea.
Bonus idea - make that false bottom out of ptfe sheet. Then the glue wouldn’t stick at all, and could just be dumped/wiped out when it dries
I was just filling it with glue paraphernalia and was wondering about a piece on the bottom to cover the dowers but also to hold things like, brushes, roll of tape the glue bottle....
it's like a construction set for big boys!)
Pure genius.
A drawer that opens on its own? I do hope it's one of those telepathic ones that know when you want their contents and open automatically. I've always wanted to see how those are made.
working with a CNC takes all the fun out of woodworking
great job
Suggest that you replace the small actuating gear with a lever that is offset to be close to the side of the tool box and pull to open on whichever side you pull the lever.
Straight up would be closed. Looks like it would work with the reduction you already designed in.
I hate how much I love that. Great job
Frank, you are having way too much fun with that CNC :-)
Nice work. The only thing that's missing is a cnc'd name across the front, like "Jimmy's Glue Box" 👍😊
I love the end result :)