Caterpillar DHK Transmission Restoration ||How To Caterpillar DHK Transmission Restoration
HTML-код
- Опубликовано: 4 окт 2024
- #HowtoRestorasion
Caterpillar DHK Transmission Restoration ||How To Caterpillar DHK Transmission Restoration
#Restorasion
#DHK_Transmission
#Howtocaterpillar
#hydrauliccylinder
#manufacturinghydrauliccylinder
#machineshop
#machinist
#australianmachinist
#pakistanitruck
#amazingtechnology
#caterpillar #automotive #caterpillardozertransmission
Any negative comments need to be ignored. There's very few workshops that would want to get involved in such a complicated heavy transmission such as this. A great job done by experienced hard working guys.
We sell ex CCCP heavy tanks, turreted/ tracked personell carriers, URAL 6x6 trucks gas turbine heli's HIND, MIG 23 Warbirds.
We service & repair / rebuild all types of transmissions and jet engines (Turmansky) and have a comprehensive machine shop.
These guys are working outside with only basic hand tools and little else. Just shows what can be achieved with teamwork and dedication..
Greetings from Russia (Girood Airfield Hangars)
♥️
Won't last a week. Too dirty.
@@Herefornow-571 watch the video, it's all being blast cleaned and washed down. This isnt some car auto transmission sensitive to a bit of lint from a cloth, it's a very heavy duty commercial trans subjected to a lot of abuse. It's the equivalent of the multi plate type we recondition in both tanks and tracked lo personell carriers.
The work these guys are doing is fine given the extreme nature of this type of transmission..
@@Herefornow-571 nah you know nothing
maybe you should sell those old tanks to Ukraine, You probably don't know this but they are being invaded by a horrible country....
kind comment
Разборка планетарной передачи показала: узел умер в результате разборки. Зато весь кишлак при делах.
I watch a lot vlog from pakistan, this pakistani mecanich is genius from small car to big bulldozer, they can fix it, inwest africa they cannot fix this machine, they send it back to europe to repair. Bravo pakistani.
Itu semua ada tuntunan cara memasangnya kembali lihat di partsbook nya dong
Thats not true my uncle was working in Gana and Akra in mines of gold as machinery mechanic
Like I said before, I’m a mechanic too and when I tackle a big job, I tune in to Pakistani Truck or PK Mechanics for motivation. These guys are awesome
Yea. I bet your a backyard mechanic. No professional would think this to be anything but stupid.
@@edgemonsiteworksllc3369 stupid is distinct from making do with what you've got
@@erinh9267 not with hydraulics or have someone rebuild your car transmission in the dirt. See how long it lasts
😊🤗🥰🙏
These guys aren’t mechanics and I really doubt you are as well if you think their awesome
На джав, из Звёздных войн, похожи. Особенно в ускоренном просмотре.
Потом бесполезно спрашивать почему не работает, вся деревня собирала_разбирала.
Notice how well these guys work together on one project. You won't see much of that here in the west.
Ремонт из серии-разбирай посмотрим, помой и собирай-походит🤣🤣🤣🤣
Чо это? Они две шестерни поменяли!😁👍
И при этом - ни одного мата. Фантастика.
@@shlossu6825 сняли, помазали и поставили обратно
Разбирали, что бы песочку добавить в механизм?
И подшипники на куски разбить. на 17:36 с лева кусок отколотой обоймы выпадает.
Вы ничего не понимаете, это священный песок)))
@@damirgabasov434 да да, по нему священные коровы ходили.
Not comment if you self don't do this
@@pawepablo2098 I am one of the managers at an enterprise where there are about 100 units of special equipment, from trucks to tractors, I know what I am talking about and I am not mediocre in dealing with the process of repairing complex machines. The repair of units should be carried out in compliance with both safety regulations and compliance with technology, especially since it is necessary to use new spare parts and not washed with an incomprehensible liquid on the ground with sand.
Hmm?
To me it looked like a training project. Deconstruct everything, remove some oil with a fancy watersteam, every teammate can touch a few elements and add some new sunflower oil and rebuild it. Did it run better afterwards?
Jet cleaner is using diesel or kerosine. Agree with your comment about everyone getting a touch, they’ll probably get a certificate at the end of the day. As did it run better - a choice of unlikely or no springs to mind.
Perfect rebuild. A job many workshops the world over wouldn't even touch. These guys are very obviously experienced in Cat transmissions. Of course it's going to run better..
all you people making fun of these guys, giving advice, speaking of the so-called horrors, well, how great you are! You put a heavy burden on those people with your mouth, when you yourself would not so much as lift a finger to do that job, nor-could-do-it even if you had the conditions you claim it need be done in. The work these "gentlemen" do is great. At least they take action to do it.
When people post their actions they have to wear the comments, freedom of speech
Are you on your knees for these people?
Right on! I couldn't have said it better myself! I marvel at the interconnection between each little industry. Like the “hand prints” on the cowshit fire cakes - to the guy who makes the welder to the crew that makes the truck frame rails out a sheet of flat stock, a straight edge, ruler and some chalk and then a monstrous press that they use as I would my car jack! This region has been well known for the craftsmanship.
Согласен с вами 💯 %👍✊️🇰🇿+🇭🇺
Glad to see everything was torqued to specs.
If you have done loads of these you can judge it by feel.
Nothing there really needed to be torqued to spec. Just tight. You apparently have not worked on equipment at all. They know what they are doing. Give a little credit to these mechanics.
Watching from Canada keep safe Guys!Full support here. Waiting
так в чем заключается востановление? промыть , продуть и готово?
Я думал они расплавят старые водопроводные краны и напаяют новые дорожки на фрикционах... А тут просто разобрали - собрали
Quality control is not a factor in this sand reassembly
Я так и не понял суть ремонта. Они просто разобрали, перемыли и собрали его?
Вот это сервис, вот это работа! Надёжный, как швейцарские часы 😁
В смысле сервис "допотопный"???😵😵😵это да!!!😹😹😹
После такого ремонта проще сразу на переплавку отдать)
Особенно по клапаны отвёрткой и молотком стучать если он не залезает
Они разберают чистят и обратно сибирают какой толк та если не ремонтируют 🤦🤦🤦🤦🤦
Bom trocaram todos os reparos desgastados mais facilmente como orings e as coroas de fricção do cambio.
Сколько интересно проходит после сборки в песке и затяжки на глазок
The sand helps the clutch packs wear in.......
Чем меньше тем лучше. Им снова работа.
If I ever visit Pakistan I am bringing you some tools
please do; or even just jot an email to your local representative and another to a member of industry (caterpillar, etc); they could start a program to get your idea to a reality
In the USA after rebuilding the transmission we would paint it to make it look brand new..... Other then that you guys did a great job with just hand tools no power wrenches of hydraulic lifts or a clean work area.....
that's called rebuilding with a brush
Brilian job. So many spareparts but they can put them in proper site. Bravo
Chaos and orderly cooperation. Just amazing!
Я восхищаюсь вашему умению вы молодцы! У вас золотые руки.
"5 Brothers and a screwdriver Transmission overhaul service"
они похожи на этих маленьких человечков из звездных войн которые всё собирали по пустыне
Джавы
I love watching these Guys, they make a skilled job look so easy.Well done and best wishes to them all.👍👍👍
Careful now, don't get any dirt in the transmission, Doing a great job under the circumstances
It’s sad but watching this really makes me appreciate the fact I live in the states. Well living in a modern society with washing machines a sink/ bathroom and pavement etc. Mad respect to the people over there tho how they do this stuff every day and are happy. It’s gotta be a tough life for sure.
People do the same thing here in the US every day. You just don't see it. I used to do it myself.
Rubbish talk
They used to go to the location set up a tent & go to work. Probably not today to many sensors & electronic stuff have to take to the shop & wait your turn.
Hold my beer- hell why your at it hold my pants and shoes, give me a dress and some sand kickers snd let me go to work
I could care less. Pakistan hates the United States
Просто нет слов этим ребятам!!! 👍👏👏👏🇰🇿
They say all that dirt mixed in with the oil will make a great break in paste for the new parts......
I cant help but think about Jawas taking apart a star ship. Captivating.
А как же зазоры в пакетах фрикционов, давление в гидроблоке я уже не говорю о шестернях без частей зубцов
Amazing so smart Pakistani child .
Ah, the old push an O-ring in with a screwdriver and hammer technique, the feels!
When we were broke, a Funk transmission torque converter of ours went out. My father fixed its stator fins with JB weld. 14 years later, it would still spin the wheels in dirt. We sold it when we got a bigger machine. Bless these guys doing the best they can with what they have.
Lovin the Lad who's removed the steel toe caps from his safety flip flops.
THE MINIONS VOICE! en cualquier momento esperaba escuchar "ERES BUENA COMO UNA PAPAYA"
Бамбарбия... Киргуду... ))) Только через ремонт Катерпиллера))
Three engineers and two designers died at Caterpillar after watching the video, a massacre!!! 😉 👍🏻👍🏻👍🏻
That's pricless
Actually they would be very impressed, I have several D9H's and have rebuilt this type transmission, just the fact they tore it down and put it together in one day is very impressive
@@Jpaydirt They would certainly be hit, but to the heart. When carrying out these interventions it is essential to work out of dust and use pullers for bearings and gears to avoid damaging the seats, etc. etc .... But I also understand the difficult situation in which these people find themselves. 👍🏻
@@Jpaydirt hi Jeff how are those 9's coming along. Just dying to see an as new 9h with your professional no cut corners beauties just switch "blading" some yrds. With a Jeff paint job to boot.
Modern technology
Caterpillar should hire them.
Они свято верят в то что если разобрать и помыть, а потом собрать, то все будет работать) Причем не меняя ни одной детали.
Pois estais enganado,foi trocado todos os reparos que se desgastam mais facilmente,e mantidos os mais resistentes.
Assim como se faz na retica de um motor automotivo.
Como da pra ver os aneis com funçao de fricção foram trocados.
Просто любопытные ребята. Захотели посмотреть как эта хрень устроена. Похвально!
Конечто так работать не будет. Нужно еще все детали перемешать, а ещё лучше с другой убитой КПП поставить, тогда наверняка заработает
Молодцы! Круто убили коробку! Песочку добавить не забыли! Прям профи!
35:09 A washer slips off the rod, into the stack. That can't be good in there! Definitely amazing to see whole process by hand though. Hope no injuries, but could imagine it happening...
I think that's a great part of these videos, connecting people around the world and seeing the rising to occasion and making do with what's on hand and helping us all think about what we can have in future if we more strategically utilize our species' knowledge and physical resources instead of hoarding in certain parts of the world
How.do.they.keep.dust.or.dirt.off.if.wind.blows.outside.must.have.secret.good.luck.
У меня бы осталось много лишнего после этого керосинового ремонта...
что-то я не понял - так а разбирали то чего?? что б промыть и собрать или я не заметил что поменяли что-то?
They work in dangerous conditions on hazmat grounds, hats off to hard work.
ما شاء الله
What was the purpose of the job? Did you replace any parts?
Yes, they replace the worn parts… those are the clutch plates. It is hard to visualízate to the eyes not familiar with the internal parts of a automatic transmissions.
@@stephanforray4987 They did not replace the steels or fibers.
That is a large task to undergo especially without specialty tools. Good job you guys.
Video description "How to caterpillar dhk transmission restoration"
Ah thanks man, exactly what I was about to do in my living room.
Goodjoob amazing your content iam from indonesia
When they wrap the chain around I thought oh they're going to use a caterpillar to lift the transmission. Obviously a caterpillar means six men in sandals
Great work. Transmissions intrigue me. And you guys do everything by hand no power tools or air tools. Very interesting video.
I did not see any point of failure, also I noticed that they are separating the ring gears from the carriers...Why? Too many hands are screwing with this. Banging brittle gears against each other That is bad!!!. They wash bearings and don't remove them for inspection and replacement? Installing new bearing with a rusty heavy hammer? Using hammer and screw drivers to close the bolt locks and no pliers? Never replaced the satellite bearings, they use aftermarket parts on the clutch pistons..Originals are Teflon, the one they are installing are cast iron...old technology. Use abig hammer to install a carrier gear? are we kidding?
You e got to be kidding, right? Sure slap it together in the dirt so when it’s installed. 10 hours later they can do it again. You people that think this is good. Have someone rebuild the transmission in your car in the same way and in the dirt. You’ll have a change in tune. I guarantee it!!!
they are great people with simple tools
Was the nut that drop inside left for the chattering chipmunk that’s been herd all through the rebuild ?.
I really like your videos but can you please hold the camera a bit more steady. I feel like I'm on a boat and I'm gonna barf
Very good mechanic
Mashallal nice bhai good
Fantastic work by every one
These guys are the real deal. Cool to watch them use their tools so well.
I have an idea. Have someone rebuild the transmission in your car using the same technique and in the dirt. I bet you’ll cuss them rather then pat them on the back
@@edgemonsiteworksllc3369 damn you really hating on them
@@elipav484 I’m a heavy equipment owner. If any of my mechanics ever tried working in the dirt repairing hydraulic components or engines. I’d fire them on the spot. But look at it like this. Your car transmission goes out. Do you take it to a professional or some moron in his yard
@@edgemonsiteworksllc3369 lol, are you in ny? i got a fleet needs servicing
Who in the world can do the work these guys can do with the tools they have ? Incredible !
Who would want to. You do realize that dirt isn’t the oil used to make the transmission work? Also. Just tightening to what ever, isn’t torqued.
@@edgemonsiteworksllc3369 they have torque meters in their arms
Who would want to. Everything they are doing is wrong.
These guys here!
@@edgemonsiteworksllc3369 well its still works. And its an official warranty repair. Kudos
Was that Alvin the chipmunk I hear?
Talk about complex engineering
Surprisingly they all seem to have fingers intact.
Just imagine if these guys had the tools and shop to do this work .
In the western countries we should start a hireing program for these people
excellent idea; another good idea would be encouraging a jointly western govts and industries financed free training and low interest loans of upgrades in equipment for shops which agree to high standards of employee wellbeing (to reward and encourage jobsite safety and fair working conditions)
Respect verry good
спасибо режиссеру оператору прожюссору давно хотел узнать побольше
I really enjoy all of these videos and I'm glad the providers can perhaps earn from them. I can't help but feel every pinched finger I have had while I watched teardown. The steel-toed sandals also make me wince! Happy Canada Day (belated) and Fourth of July to all!
THAT WHAT YOU CALL. TEAM WORK
Great job wow wow the way they work great 😍😍🥰
Impressionante como eles trabalham muito bem, desmontam tudo, limpam peças por peças, e montam tudo novamente, impressionante o serviço deles, parabéns!
My question is what the heck did they do? Just took it apart and cleaned it? I didn’t see them put anything new back in
Setting planetary gears with a stubby sledge hammer???
ya man..and getting the torque specs correct?..is a guess ..I guess
Some how, I think that transmission will see another restoration near future.
CAT Platinum overhaul right here boys
If they have compressed air why dont they use an impact wrench to remove all those screws?
Maybe a very small compressor.
They got a bigger budget for cameras and phones instead of tools and equipment.
Complimenti !!! 👍 .... Da noi ci voleva una Settimana compreso lo Straordinario .... (e il “tipo” ci ha lasciato anche un’unghia) !!
I can't believe how good of a job they do building those look perfect While they are doing it on nice clean dirt wow
Because gears love dirt
At 1:15 is the start of a master class in the " chain wrapped around the outside of the lifting eye" technique. Brilliant.
@@issadraco532 You got that right
@@issadraco532 first time? ))
@@issadraco532 Say that again…
You saw that to eh? That’s called. Fck up from the beginning. Not torquing.. hmmm. Failure to remove parts without damage.. makes you wonder why anyone would think their doing a good job. Oh and don’t forget .. let’s do this in the dirt
@@issadraco532 hahaha. I like you kid!!
When rebuilding a Cat Transmission make sure not to replace the clutch packs and disc so the transmission will slip after the rebuild . Make sure to ad some dirt from the surrounding areas after cleaning .
Теперь я знаю, чем в свободное время, занимаются Миньоны 🤣👍
How to clean a transmission by Mrs Hinch. Dont check tolerances or wear, the extra oil, dust, dirt and grease will work wonders.
It could be in your machine with a nice coat of yellow paint on the 'Refurbished Transmission' on Amazon marked Refurbed in Pakistan..
Why do you assume they are all idiots ?
Backyard wrenching at its best right there! Only these guys are 10 times as fast.
Rapaz são profissionais. Meninada rápida. Parabéns
De mi parte los felicito a esta gente no merecen vivir de la manera que viven y como resuelven las cosas con lo poco que tiene saludos coordiales
Total success! Only a small box of parts left over, but they're not important. lol.
Was the nut that dropped inside left for the gremlins to play with ?.
Awesome, amazing work........
Good job👍
Awesome work, need steel boots and working uniforms.
It is just cleaning?
Make sure to wear steel toed sandals when working around heavy transmissions that way you have a better chance of getting your toes crushed when you drop something
Only worst place to do this would be on a beach in a windstorm.
My girlfriend told me that same thing once .....
Só faltou uma bancada pra não deixar essas peças no chão gujo.
May allah bless Pakistan
Они как тараканы, куча рук в одном месте, я бы так не смог, один откручивает ключем, тут же другой рукой крутит это жесть... А вообще я так и не понял для чего коробку разбирали, дефектовку вроде не делали, тупо помыть? Вообщем не ясно, куча времени потратили а для чего не ясно.
You don't need no safety shoes! That is a Caterpillar approved repair. right there.
i need some one like you guys over here in new York city to do job on my van transmission in engine to greet job
Сервисные инженеры (туземцы) производят ремонт и отладку механизмов высокотехнологического транспорта современным оборудованием и инструментом.
Pakistani peasants who work without any protection in these slave workshops with bare hands and bare feet like slaves. like cattle 🐂🐂🐑🐑🐐🐐🐪🐪. and even children do this work full of danger and risk. but in any case there is something hidden behind this way of life and work which cannot be seen...that is. 🌿🌿🌿 the grass 🌿🌿🌿 the kharchach. the kanabi. hashish. that's why these peasants work like this with night pajamas without thinking about anything. just to earn 2 or 3 💵💵💵 dollars a day.
Ой да ладно, в России то же самое - каждый третий стервис наверное - нихр..ена нормально ни коробку ни двигло перебрать не могут!
@@shlossu6825 в россии хуже намного за ооочень редким исключением. здесь делают как могут из того,что под рукой, а у нас даже с новыми запчастями, задача как можно больше насрать и бабла побольше отжать
@@dr.moreau5026 у нас в сервисе гайки колёсные не докручивают, а ты потом дома сидишь и удивляешься как получилось доехать и не разбиться. Зато в ремзону не пускают со словами "вдруг в тебя что то отлетит, а нам отвечать". Но мы своими рукажопами гордимся, а этих умельцев обсираем.
Пневмоинструмент ребятам ,,гораздо ладилась работа !👍
So when it comes back in about month are you going to show that? What about torque specs? Clearances? Locks and oils?
toque specs aint shit, built my trans a year and a half ago without a torque wrench in sight or a feeler gauge lol