Hi Can you please help. Does the camera must be connected to pin 31 & 32 before doing these settings? I did config change from alfa obd. I have 2 options in alfa obd Rear View Camera and ECU Rear Camera Present. If i turn on ECU one this makes my engine light turn ON. Also i didn't see any option in uconnect 8.4 UAQ.
you think with obdlink m+ + alfaobd+ security cable you can connect high beam with mile light, remove belt warning, and adjust tire pressure, and install long horn headlamp on a ram 2500 laramie 2021
I think you can but also with the newer model trucks if there is any procedure requiring a rf hub reset the security code rolls every 24 hours and must be purchased from the dealer parts dept. the things you want to add or change I dont believe need a pin.
You can try it, honestly dont have any experience with chrome book. Look on playstore and see if it is available to download. It may work fine, but I cant say for sure.
Nice video. I was looking for someone to explain the difference between the ex and mx+. Do you notice a difference between the mx+ and the ex? Which would you say is better?
@MKSPerformanceOffroad that is all I needed to hear. I haven't been able to find a comparison chart to see what one does that another one can't. I saw in your video you had the mx+ but used the ex for the video.
@@sajazzman007 it is more the spare version like computer based that has an easier time changing things like mileage or advanced features on some newer trucks.
@@MKSPerformanceOffroad thanking you am still learning about the software and the tool I've managed to install but still haven't used it on any vehicles. I'm doing that for apart of my living.
Any idea how to activate the controls soft key? I recently switched to a carplay 8.4 display and no longer have the controls soft key to access my cameras. I just installed the cargo camera and can’t get it to activate.
@@AndrewH91 a drive cycle consists of actually driving the truck a certain distance/time/speed and shutting it down. May take 1-3 drive cycles to set the changes.
Unfortunately no, the nav is a paid software so you have to get the activation code from the dealer for the radio. You can use the software to enable everything else that would be needed.
Dodge Ram 2018 and up have a security gateway that requires a two plug by-pass harness to enable any code changes or reprogramming. Any OBD reader and AlfaOBD software is useless without that by-pass harness.
Nice. Waiting for install vid. I’ve got so much I need to do / add to my ‘16 2500.
Great info. Thank you
I love your new logo brother!
Keep up the good work.
Thanks
Hi
Can you please help. Does the camera must be connected to pin 31 & 32 before doing these settings?
I did config change from alfa obd. I have 2 options in alfa obd Rear View Camera and ECU Rear Camera Present. If i turn on ECU one this makes my engine light turn ON. Also i didn't see any option in uconnect 8.4 UAQ.
What model year?
you think with obdlink m+ + alfaobd+ security cable you can connect high beam with mile light, remove belt warning, and adjust tire pressure, and install long horn headlamp on a ram 2500 laramie 2021
I think you can but also with the newer model trucks if there is any procedure requiring a rf hub reset the security code rolls every 24 hours and must be purchased from the dealer parts dept. the things you want to add or change I dont believe need a pin.
@@MKSPerformanceOffroad thanks
I ordered the ex, but I have a Chromebook with the alpha from the Google play store will it still work or would I need the desk top version
You can try it, honestly dont have any experience with chrome book. Look on playstore and see if it is available to download. It may work fine, but I cant say for sure.
Thanks! Nice Video! If you use the USB Laptop cable do you not need the unlock cable?
Thank you and yes you do need the unlock for 2018+.
Do you work on 2022 PW... where are you located?
Does the usb one work to program puddle mirrors and keys?
Yes, use with computer version of app
@@MKSPerformanceOffroad thank you!
@@TunedbyIce 👍🤛
Can this be done for front grill too?
Yes you should be able to add the front camera as well.
Do you know where I can buy the wire harness for the third brake light camera
I bought mine off ebay but you can find them on amazon or Ram dealer. See link for amazon amzn.to/3y79q20
@@nicholasschneck5035 yes how much
Nice video. I was looking for someone to explain the difference between the ex and mx+. Do you notice a difference between the mx+ and the ex? Which would you say is better?
Both are good choices, really comes down to os. Computer version of alfaobd can perform a few functions better than the Android version
@MKSPerformanceOffroad that is all I needed to hear. I haven't been able to find a comparison chart to see what one does that another one can't. I saw in your video you had the mx+ but used the ex for the video.
@@sajazzman007 it is more the spare version like computer based that has an easier time changing things like mileage or advanced features on some newer trucks.
Good vid
Thanks for the support.
@@MKSPerformanceOffroad thanking you am still learning about the software and the tool I've managed to install but still haven't used it on any vehicles.
I'm doing that for apart of my living.
Would this work on a 14? And If you don’t mind me asking what did you pay for the brake light?
If Im not mistaken the radio needs to be MY16 for the camera to work in the cargo location. Junk yard find was $250 with camera.
Do you have any current coupon code. States maxed out.
I dont at the moment.
Any idea how to activate the controls soft key? I recently switched to a carplay 8.4 display and no longer have the controls soft key to access my cameras. I just installed the cargo camera and can’t get it to activate.
The programming described in this video should set your soft keys after a few drive cycles.
@@MKSPerformanceOffroad to clarify drive cycles is that actually driving the truck or is that just cycling the ignition on and off?
@@AndrewH91 a drive cycle consists of actually driving the truck a certain distance/time/speed and shutting it down. May take 1-3 drive cycles to set the changes.
@@MKSPerformanceOffroad got it thanks for the clarification!
how use the app in laptop I have thus app in my cell
Ok do what will happen if something mess up how would you know
Pm’d you on IG. Depends on symptoms.
and paybass conection ??
????
@@MKSPerformanceOffroad sorry im talkig baypass connexion obd ?
@@vagpro2546 ok what is your question?
@@MKSPerformanceOffroad ram have baypass gettway conection
@@vagpro2546 18+ my require gateway module bypass
I there a way to enable Nav. with AlfaOBD ? 20017 2500
Unfortunately no, the nav is a paid software so you have to get the activation code from the dealer for the radio. You can use the software to enable everything else that would be needed.
Codes for discount not working
These codes normally are only good for so long or so many customers. The code probably got the allowed amount of use by obdlink and no longer valid
How much is the discount code?
If it is still working 10% I believe
It's not working..
"Coupon usage limit has been reached"
Do this work with a 2021 truck?
As long as your pinouts are the same and you can verify on a schematic.
Dodge Ram 2018 and up have a security gateway that requires a two plug by-pass harness to enable any code changes or reprogramming. Any OBD reader and AlfaOBD software is useless without that by-pass harness.