Ya this is an awesome looking truck, and is the best in the market rigjt now. I don't know why AXIAL did not do what GMADE has done with their drive-train !! 👍👍
Great video Matteo. I just got my truck 85% done. The tranny and drive are quiet and very smooth. This is a great kit and fun to build. Looking forward to more GMade vehicles.
Davvero interessante e completo..non c è che dire i tuoi video sono dei corsi veri e propri di assemblaggio meccanico. Preciso, chiaro molto istruttivo
Ich verwende nach Wasserfahrten ein Kriechöl-Spray. Der sollte das Wasser verdrängen. Es kann aber schon sein das man nach einigen Jahren mal das eine oder andere Lager wechseln muss.
Yes, but I do use a bit of grease on them too. In many transmissions are all gears made of plastic and I use also grease on them. But I would not use grease on the spur gear when it's not covered in a gearbox.
Took another look at this on larger screen. At about 2:40 into video that larger center gear looks very poorly cast. You can see the split right down the middle of the gear teeth. Not good.
Is this this the same transmission as the previous GS02 models when 2 speed was fitted? It looks quite different as it doesnt seem To use the bottom of the skid plate any more
Can someone pleaseeeee bring light to this 2 speed issue! So many users have their gmade Buffalo locked in 1st gear due to the binding happening in 2nd! Can you please post about this?
WOW that looks real good! Beefy! 👍
Ya this is an awesome looking truck, and is the best in the market rigjt now. I don't know why AXIAL did not do what GMADE has done with their drive-train !! 👍👍
Yes, it looks really good! Thanks Steve! 👍😊
This IS the best RC Crawler/Trail Truck on the market, period, because of its function. 😁
Thanks Paul! Yes, it's relly a good truck! 👍😊
Rc , you didn’t live in fear during covid, many manufacturers came out with new platforms! Great to see !
Yes, and a lot of people have more time for the hobby at the moment. 👍😊
Covid-19 is making ppl build more time
Great video Matteo. I just got my truck 85% done. The tranny and drive are quiet and very smooth. This is a great kit and fun to build. Looking forward to more GMade vehicles.
Thanks! Have fun! 👍😊
Davvero interessante e completo..non c è che dire i tuoi video sono dei corsi veri e propri di assemblaggio meccanico.
Preciso, chiaro molto istruttivo
Grazie molto. Sono felice di sapere che. 👍😊😊
Thank you for the information on pinion gear placement. I love your videos.
Thanks! Glad it was helpful! 😊👍
Thank you for such an informative and well filmed /explained video
Glad it was helpful!
excellent video, that gearbox looks really rugged should last ages, nice one my friend
Thanks Julian! Yes, it looks really good! 👍☺️
Next step ready, Thanks for sharing. A lot of clips.
Yes, dangerous to fly them arround... 😂😂😅
Thanks for sharing the build Matteo I’m looking at buying another G-made
Thanks! Have fun! 👍😊
Love your channel from a Japanese TAMIYA big fan!! I have enjoyed super awesome videos you ever create, thanks!! Fielen danke!! ありがとう！
どうもありがとうございます！Thank you so much! 🙏🙏😊😊
Quite a complex yet easy to build Transmission!! Thanks Matteo, for finding the little tips to make it a smoother build! 👍👍
Carmine ✈🚂🚙
Thanks Carmine! Always great to hear from you! 👍😊😊
Great job 👍, I like it to becomes some more information for my work at the same rig
Another great video my friend. I've got my Buffalo just about finished but I enjoy watching you build stuff.
Perfect! Have fun with yours! 👍😊
👍👍🔥 good video mate
Thanks! 👍☺️
I wonder with the motor installed, maybe its hard to check for good correct gear mesh with pinion and spur gear
It is not possible to check, you have to rely on the design. But I can say it works perfectly!
Grate video again lookin good m8
Thanks David! 👍☺️
Getriebemechaniker!!
Neuer Beruf! 👍😊
tanks
Welcome
My gmade Buffalo second gear slips and the servo is working correctly what could it be?
If the shift rod shifts the required distance, it is possible that you have mounted something incorrectly.
Kann man die Kugellager "nachschmieren"? Erfahrungsgemäß treiben längere Wasserfahrten mit der Zeit jedwedes Fett aus den Lagern.
Ich verwende nach Wasserfahrten ein Kriechöl-Spray. Der sollte das Wasser verdrängen. Es kann aber schon sein das man nach einigen Jahren mal das eine oder andere Lager wechseln muss.
👍🏽🐒🇺🇸
👍😊
Hi Matteo, darf ich fragen welches Fett Du für Getriebe her nimmst? Viele Grüße, Markus :-)
Ich nehme MoS2 Schmierfett von Nigrin, aus dem Baumarkt beim Autozubehör. 👍😊
Mateo, normally I don’t grease spur gears as it’s plastic meshing with a metal pinion.
Yes, but I do use a bit of grease on them too. In many transmissions are all gears made of plastic and I use also grease on them. But I would not use grease on the spur gear when it's not covered in a gearbox.
@@Matteomeier I agree if all the gears are plastic including the motor pinion, but these days that is rare
@@jonthomas8487 Not on Tamiya models! 😂😂
@@Matteomeier most of their motor pinions are metal and they mesh to a plastic spur
Took another look at this on larger screen. At about 2:40 into video that larger center gear looks very poorly cast. You can see the split right down the middle of the gear teeth. Not good.
Yes, in the video I saw it also. But no problems with the gear so far.
Is this this the same transmission as the previous GS02 models when 2 speed was fitted?
It looks quite different as it doesnt seem To use the bottom of the skid plate any more
Yes, it's completely different. The gearbox is a seperate piece now. And this is much better. 👍😊
@@Matteomeier Thank you for the response. Is the over drive built into the gearbox on the new version?
@@hardcoretam Yes, it’s already build in.
This is a two-speed transmission isn't it?
Yes, it is.
Can someone pleaseeeee bring light to this 2 speed issue! So many users have their gmade Buffalo locked in 1st gear due to the binding happening in 2nd! Can you please post about this?
Is that brushless motor waterproof?
Yes.
hello matteo,i follow you from Italy, when step 3, 4, 5, etc ... ??? Top 👍👍
Yes, next Friday coming the next video! 👍😊
you are the best, I bought a gmade gs02f in kit which will arrive in 15 days. Now, thanks to you, I'm sure I'll do a good job, thanks Matteo ✌
I've done a few videos but I'm do ing them on my phone , it's tricky on my own LOL
It needs also a bit experience... keep it up! 👍😊
@@Matteomeier do you know of a decent cheap head cam Matteo
@@Matteomeier I've noticed the talking helps on your videos, it makes them much more interesting
Hi matteo , could you tell me a good cheap head can to start me off videoing my cars plz
I would recommend a Sony Handycam, something like a CX-450. Otherwise a GoPro is also a good choice.
@@Matteomeier cheers pal , appreciated