Everything looks so easy, when you do it. But you are a super good builder. It’s really super to have your videos I always learn something new. Keep up your great work. From Martin in Norway
Hi Matteo, great looking rig, great paint job, love the colour and the mat detail. I have just started my build of the Carisma SCA-1E Range Rover. A very happy New Year to you 😉
Awesome series. Thank you so much! I wish I had the patience to wait for your series to end. I could have used some of your tips on this video on my own build.
Sehr schön gezeigt wie man es machen soll 👍 ich frage mich, wieso man so viel noch selber ausschneiden muss, das könnte doch bei der Produktion einfacher gemacht werden. Für vieles braucht es eine ruhige Hand, also nicht gut für mich 😂
Hello Mateo. Once I finished my Buffalo, I can see there is too much torque twist… even having the axles working in opposite direction… do you have any advice to avoid this?? Thanks and regards
Hi David, this phenomenon is not a classic torque twist. It only occurs on flat, hard surfaces, because of the overdrive function. The front wheels turn slightly faster than the rear wheels. On flat, hard surfaces, the tires don't have enough slip, and this creates tension in the drivetrain that leads to this type of torque twist. On rough, uneven terrain or loose surfaces, this torque twist disappears. And the truck is built for those situations. But I have found that with shorter shocks (I have 75mm in mine) this phenomenon is not as severe. Hope this help you!
@@Matteomeier thank you so much for your help and support. I have tried with a Traxxas TRX4 shocks set. Whit these on its loosen spring position it is still appearing but less than with the original ones which, in my opinion have a too hard spring… Again, thanks for your help and such a good channel.
I use the markers from Edding. They hold good but can be easily removed with alcohol, if a mistake happens. www.edding.com/de-ch/produkte/edding-404-permanentmarker/
Awesome, Awesome, Awesome!!!! I got my Gmade Buffalo a couple days ago and can’t wait to build it. Can I ask where you found the head lights and tail lights? Happy New Year to you and your family and thanks for the amazing videos!
Hi Mateo. Thanks for these videos which definitely aim me to buy one of these Buffalo. I would like to ask about the lights kit references you mounted in the body. Thanks and regards.
Tamiya Spray Paints are no longer available in Switzerland, banned by law. So I have to use other brands: www.ghiant.com/brands/modellers/rc-paints/rc-car-colours/
Happy New Year my Friend!! That turned out so nice, Matteo. As I said before, I LOVE that Blue!! I cannot find that Brand in the U.S., so I'll have to find something similar here. I'm definitely getting a Buffalo. 😊 You sold me! I wish you and your Family continued prosperity in 2021!!! 👍👍 Carmine ✈🚂🚙
I prefer the preparation and design of the body I always feel disappointed when I unpeel the outer film as the painting is complete and there is nothing more to do 😊 sometimes I leave it on with something else to do so I can appreciate it for longer 👍 Another great video Matteo 🇬🇧💪😜 P. S where do you sell your excess RC's when you don't have room for them please??
Till yet I try to keep all trucks and try to create more space for them! 😅😅 I always been in hurry to peeling of the film, I like to se the result as soon as possible! 😂😂
@@Matteomeier Ich hoffe das er bald wieder bestellbar ist😬 In der Zwischenzeit schaue ich weiter Deine wirklich Top Videos!👍🏻 Macht mir viel Freude die Videos zu sehen. Happy New Year, Gesundheit für Dich und Deine Familie 👍🏻
Happy New Year Matteo!!! Hope I knew your technique to cut lexan before, I made some dumb rookie mistakes on my kits. Anyways I like how you do your interiors and I was wondering if you have a tutorial video about it. If so please share the link I will like updating Jimny's interior, probably put one in the TRX4 Sport and definitely the Range Rover needs some interior too Best wishes again for this 2021!!
That is a beautiful Buffalo Matteo, I love it! you make installing the window trims easy. I'm going to try your technique because "This Is The Way"
Thank you! Glad it's helpful! 👍😊
Body looks great ! I like the window trim trick. Wish my hands were as steady using the xacto knife as yours are. Thanks.
Thanks Michael! 😊👍
I Love buffalo 👍😍👍
Cool! 👍😊
Brutal video 🤤🤤 te mando la carroceria y me la pintas 😅😅😅toma un gran 👍
Everything looks so easy, when you do it. But you are a super good builder. It’s really super to have your videos I always learn something new. Keep up your great work. From Martin in Norway
Nice video to start 2021. Beautiful result with the color combination.
Thank you! 🙏 😊
Matteo grazie mille per questi video! Ho ricevuto una Buffalo per compleanno e le tue guide mi hanno salvato la vita :D
Mi fa piacere che sia stato utile! 👍😊
Well done my friend i like it have fun and be safe 👊😜👍
Thank you! 😊👍
Another fantastic job! Thank you so much again! Your instructions are flawless
Thanks so much! Glad you liked it!
Looks really sharp Matteo! I'll also remember that decal applying trick when I get to that stage with my Proline Jeep body. :-)
Thank you! Glad it's helpful! 😊😊👍
Great job 👍
😲Wow! That looks really nice!! Great build Matteo!!
Thanks Steve! 😊👍 Glad you watched it!
Good work as usually Matteo👍👍👍🍾
Thank you Miro! 😊😊
Hey I just wanted to say you did a great job on the G period! 👍
Thanks so much Donnie! 😊😊👍
Fantastic build series
Thank you! 😊
Awesome video thanks for sharing 🥰
Thanks for your feedback Rene! 👍😊
Great job and painting tips !
Thank you! 👍😊
Happy new year to you Matteo!! I hope all the world this to be a better year!!
Thank you! Yes, we all hope this! 👍👍😊
Looks fantastic. Happy New Year. 👍🏽🐒🇺🇸
Thanks a lot! 🙏😊😊 Happy new year to you too!
Great job. Looks good.
Thank you! 🙏
A very good build, lovely truck
Thanks! 🙏 🤩
Hi Matteo, great looking rig, great paint job, love the colour and the mat detail. I have just started my build of the Carisma SCA-1E Range Rover. A very happy New Year to you 😉
Thanks so much John! Have fun with your Range Rover! Happy new year to you! 😊😊
Красота 😍👍👍👍👍👍. С Новым Годом!
Большое спасибо! И тебя с Новым годом! 🙏😊
Awesome series. Thank you so much! I wish I had the patience to wait for your series to end. I could have used some of your tips on this video on my own build.
Thank you! 👍😊
Super gebaut Matteo. Sieht am Ende richtig gut aus!!! 👍🏻😉👍🏻
Und ein gutes, gesundes neues Jahr !
Vielen Dank Robert! Das wünsch ich dir auch! 😊😊👍
Sehr schön gezeigt wie man es machen soll 👍 ich frage mich, wieso man so viel noch selber ausschneiden muss, das könnte doch bei der Produktion einfacher gemacht werden. Für vieles braucht es eine ruhige Hand, also nicht gut für mich 😂
Danke Otto! Manchmal ist genau das Selbermachen der Sinn vom Ganzen, so ala der Weg ist das Ziel! 😊😊😊
Hello Mateo.
Once I finished my Buffalo, I can see there is too much torque twist… even having the axles working in opposite direction… do you have any advice to avoid this??
Thanks and regards
Hi David, this phenomenon is not a classic torque twist. It only occurs on flat, hard surfaces, because of the overdrive function. The front wheels turn slightly faster than the rear wheels. On flat, hard surfaces, the tires don't have enough slip, and this creates tension in the drivetrain that leads to this type of torque twist. On rough, uneven terrain or loose surfaces, this torque twist disappears. And the truck is built for those situations. But I have found that with shorter shocks (I have 75mm in mine) this phenomenon is not as severe. Hope this help you!
@@Matteomeier thank you so much for your help and support.
I have tried with a Traxxas TRX4 shocks set.
Whit these on its loosen spring position it is still appearing but less than with the original ones which, in my opinion have a too hard spring…
Again, thanks for your help and such a good channel.
Matteo, what markers do you use to draw on lexan bodies? It seems hard to find a nice permanent one...
I use the markers from Edding. They hold good but can be easily removed with alcohol, if a mistake happens. www.edding.com/de-ch/produkte/edding-404-permanentmarker/
@@Matteomeier Thank you Matteo :)
Hi Matteo, happy new year and compliments for video editing. Very nice car. Ciao Nanni
Thanks Nanni! 😊😊👍
Einfach großartig.
Vielen Dank! 👍😊
Awesome, Awesome, Awesome!!!! I got my Gmade Buffalo a couple days ago and can’t wait to build it. Can I ask where you found the head lights and tail lights?
Happy New Year to you and your family and thanks for the amazing videos!
Thanks Brad! Have fun with your Buffalo! 👍😊 The lights are from Gmade: www.gmade.net/products/spare-parts/buffalo-option-parts/
Hi Mateo. Thanks for these videos which definitely aim me to buy one of these Buffalo.
I would like to ask about the lights kit references you mounted in the body.
Thanks and regards.
Thank you! GM30055, GM30169, GM30170, GM30171
www.gmade.net/products/spare-parts/buffalo-option-parts/
Nice work.
Thank you! 🙏
Matteo, I was wondering what type of paint you had there? i see Tamiya P series but what are the others? thank you
Tamiya Spray Paints are no longer available in Switzerland, banned by law. So I have to use other brands: www.ghiant.com/brands/modellers/rc-paints/rc-car-colours/
@@Matteomeier thanks for the info! As always, your work is amazing and your videos are stunning to watch. Your attention to detail is top notch!
Happy New Year my Friend!!
That turned out so nice, Matteo. As I said before, I LOVE that Blue!! I cannot find that Brand in the U.S., so I'll have to find something similar here.
I'm definitely getting a Buffalo. 😊 You sold me!
I wish you and your Family continued prosperity in 2021!!! 👍👍
Carmine ✈🚂🚙
RPP Hobby, pretty sure you can preorder from there
@@JustinDDavis The Blue Paint??
@@CarminesRCTipsandTricks sorry..thought you meant the truck.
Thank you Carmine! Wish you all the best also! I'm sure this year getting better for you! 😊😊
@@Matteomeier Thanks my dear Friend! I hope so.
I prefer the preparation and design of the body I always feel disappointed when I unpeel the outer film as the painting is complete and there is nothing more to do 😊 sometimes I leave it on with something else to do so I can appreciate it for longer 👍
Another great video Matteo 🇬🇧💪😜
P. S where do you sell your excess RC's when you don't have room for them please??
Till yet I try to keep all trucks and try to create more space for them! 😅😅 I always been in hurry to peeling of the film, I like to se the result as soon as possible! 😂😂
Nice job Matteo, thoroughly enjoyed the build series, great paint scheme and Happy New Year.
Thanks David! All the best for you too! 😊😊👍
Amazing.
Thanks Eric! 😊😊
Does anybody know where can I buy a half body rc figure?. Can't seems to find anywhere online. Thanks
A happy new year matteo :-) Great job on the buffalo ! Greetings
Thank you! 🙏
Good job man
Thank you Tony! 😊
Matteo, the model looks very good. Great job. I always enjoy your videos. - Tom @ Bryn Mawr RC
Thanks Tom! Glad to hear this! 😊😊👍
Nice truck
Thank you! 🙏😊
Could you provide a link to the pinstripe tape?
www.hrcracing.net/articles.php?id_article=1000025350&lg=en
Do you sell the rc after assembly with no electronics in it?
No, I keep all my cars... 😊
AWESOME... AS ALWAYS.
JUST WONDER WHY THERE ARE FEW LOSERS WITH THEIR THUMB DOWN.
Thanks so much! No problem, haters are everywhere! 😅😅
I like your bumber. Is it metal or plastic? Where can I get one?
The bumper is plastic and comes in the Buffalo kit...
Very nice man !
Thank you! 😊👍
Happy new year m8 that’s lookin rearly fantastic u don grate job on it m8 can I ask how much was the light kit for all lights from gmade m8 👍👍👍
Thanks David! 👍😊 Here the prizes are shown: www.gmade.net/products/spare-parts/buffalo-option-parts/
Maybe a bit more outside of Korea!
good Job
Thank you! 🙏 ☺️
I wish you could buy a Traxxas Defender body like this... I really want smaller wheel arches for more scale wheels.
Yes, this would be a good option... 👍
Sehr schön Matteo 👍😍👍 Ich muss noch warten bis ich den Buffalo bestellen kann. Derzeit nicht lieferbar 😔
Vielen Dank Markus, wird sicher bald wider verfügbar sein! 👍😊
@@Matteomeier Ich hoffe das er bald wieder bestellbar ist😬 In der Zwischenzeit schaue ich weiter Deine wirklich Top Videos!👍🏻 Macht mir viel Freude die Videos zu sehen. Happy New Year, Gesundheit für Dich und Deine Familie 👍🏻
@@DL2MWR Vielen Dank! Das wünsch ich dir auch! 😊😊
Hallo Matteo, das Licht ist bei Dir Permanent an oder? Das kannst Du nicht über die FB ein und aus schalten? Viele Grüße
Hallo Markus, Licht ist immer an. Wenn man das schalten möchte bräuchte man einen switch dafür.
@@Matteomeier Hallo, ja richtig, ich hab das so letztens Endes nun gemacht 😬👍🏻 Schaltbar via Fernbedienung
Lovely 😍💋 💝💖❤️
Happy New Year Matteo!!!
Hope I knew your technique to cut lexan before, I made some dumb rookie mistakes on my kits.
Anyways I like how you do your interiors and I was wondering if you have a tutorial video about it. If so please share the link I will like updating Jimny's interior, probably put one in the TRX4 Sport and definitely the Range Rover needs some interior too
Best wishes again for this 2021!!
Thank you Pablo! 😊😊
Here you can see something: ruclips.net/video/W985ThG74do/видео.html
Or here: ruclips.net/video/rSVdNqd7CIU/видео.html
Fantastic thank you for your help I will try this in a close future
great
Thanks Kaza! 😊😊
Just screw it! ... :)
I try! 😊👍