Same here with the 1320 manifolds. I have 2 top mount manifolds with the "Blemish" deal and l probably put a couple of blemishes while installing them. 😂
I took every precaution possible with my turbo when is comes to oil delivery and drain. I used the precision large oil drain fitted. It is square ported, i ported the turbo cartridge as well. On the oil inlet side no more hit or miss restrictor. I opted for the TurboSmart OPR oil pressure regulator. It is absolutely the way to go.
His lady is very nice and for sure makes this video even more helpful for us viewers, you guys make a great team. Keep up the great work , thank you both for the information and the great video!
I bought an rsx cxracing turbo kit with the 11 gauge manifold for my ep3 k20a2 unopened. I changed the wastegate to a 45mm turbosmart gen 5, bov to a tial rep, even kept the old cast gt35 with .63 hot side that came with the kit and still made 450whp 313 tq @ 15lbs on a hot humid day on pump gas on a returnless fuel set up. Would’ve made more if it had an rbc on it. This is relatively the same kit and prolly spent less than I did for better stuff, awesome video!
Thank you for the video. I'm currently getting parts together for my k24 turbo build. It's taking some time to get it all, and I have forgotten a few things, but this video has been quite an eye-opener. I'm in Australia and get most, if not all, my parts from eBay but it can be hard at times to know what to get and if it's going to be what I actually need as this is the first time turbocharging a car or anything for a fact so thank you again you've been very helpful.
Huh... How you going to tell grown-ass man to take his time. Your comment is just... Just meh.... Honestly you haven't seen how many videos the guy has made. Hundreds and hundreds of them
Nice kit u put together. I think it’s best to buy parts individually when putting a kit together as u can customise it. That’s what I did with mine. Wasn’t for a K, something else.
nice video!.. wish i would have seen this BEFORE i pieced together my turbo kit! First time I have heard of potential issues running a tct plate oil return. thanks!
The BOV you show is the gen 2 copy. Even the authentic Tial BOV has problems. Lately you have been getting the gen 1 knock. They are extremely good👍The wastegates you sell are also great performers and very cost affective 🤗
Aren't you gonna run a full exhaust? I want to see the downpipe and etc process. Although, PLM makes a 2 piece V-band 3" downpipe that would possibly fit. It has a flex pipe and all. Christine should be your camera woman for all of the videos! It's different watching you being filmed vs random selfie mode.
Glad it didnt sell and you are keeping it. I would also like to see you do it at home in your driveway and garage. Ya haven't really did a car build at home in a long time especially the new place.
Thanks for the video. Would you recommend another brand like jackspania now that 1320 isn't available on eBay anymore? I know you're testing a plm manifold in a newer video but those only come with a t3 I think? Anyways love the videos man!
Funny you are almost selecting the same parts I usually do. However I prefer turbosmart/ GFB wastegate and prefer HKS bov, I’m going to run GTx3582R myself but yes definitely makes sense thank you!
Cut! 🤣. Good video. Definitely film and build the integra in the driveway. Your body is gonna be pissed when u get done rolling around and all the up and down. Keep pushing.
Thank you for the video, Your women sounds hot, good for you. Building 96 Ek hatch K24a2 pushing 220whp all motor atm gonna give this 1320 headers and I seen they have innercooler and piping on there site now too a try. As for turbo I wanna push 400whp give or take. So I’m not sure on a quick spooling turbo 6262 your using looked to big but I’m not sure.
have you used those blocks for for the oil pressure switch? I used one to mount a gauge for oil pressure and the bastard was reading 0 at idle on a d16, I now have a sandwich plate with oil temp, pressure and oil feed and everything is normal
i have a failed speedfactory map sensor f/b/d type. it leaks air and vaccum through it's construction, where the plastics were not glued good enough. And I don't know where to get my waranty. Also speedfactory looks way cheaper than omni
I mentioned in the video the places I got the stuff. The links are listings on eBay are forever cycling and changing unfortunately. This should still get you in the right direction!
Have they stopped selling/mfging this manifold? Can't find it with a google search, don't see a link, not on huntertuned and don't see it by searching manifold or sidewinder on 1320 either.
I’m not sure. Just search k20 turbo manifold on eBay and pickup the rev9 one they are super similar just different raw finish. Here’s a link www.ebay.com/itm/272845314360?hash=item3f86d91938:g:-4IAAOSwqwhdux5x&amdata=enc%3AAQAHAAAAoHy0UZuwRRl37JC8AhwFaHcox7JDmLZJjiYpZESFqzc4i59K5PWbD6wtYNEemSlyhjo7YC2ILu4A4gwnrNw328xbfRiYZvgyaP3SEuOEj9dUcOXCtM5%2BlCnYSABZi9DCeMKz8z7N3Li9wKlCAueW8IaJ%2BB7a7R%2FfdGzR1U2%2BfxWvr2I5w%2FM3BkMEwnt5gIUIHdclHpZzO4xn3sIPOaNw7wQ%3D%7Ctkp%3ABk9SR6j08LfzYA
@@HunterTuned i did see the rev9, they have mixed reviews on some of their manifolds on other cars about the welds and rough edges inside the manifold + slag. I’ll probably take my chances though Bc it’s that or the cx racing kit with the down pipe for me lol. Appreciate the response.
Hi Im interested in the VSR 58/55 Dual Ball Bearing Billet on your website, I have a 1320 topmount for my B series, I need to know if the dual vband model will be compatible with my manifold. Could you possibly measure the vband inlet flange?
Let’s go muhboi. So happy I sold you this car. It has come a long way.
#hondadaddy
Hunter, yes please continue on with this series. I'm wanting to turbo a k24 and never done one before.
I'm thinking about going k turbo or b turbo on Feb.
This is very helpful video. I like the piece at a time explanation with pricing and tips. Wanting to do a k series, going to start collecting parts
Zzs s
Same here with the 1320 manifolds. I have 2 top mount manifolds with the "Blemish" deal and l probably put a couple of blemishes while installing them. 😂
I cut the waste gate snout off of 1 and moved it to the other side of my blem top mount lol
Where do you find that sidewinder can't find it
Have been interested in a k24 swap turbo budget build. and now ima use this guy as my main source
I took every precaution possible with my turbo when is comes to oil delivery and drain. I used the precision large oil drain fitted. It is square ported, i ported the turbo cartridge as well. On the oil inlet side no more hit or miss restrictor. I opted for the TurboSmart OPR oil pressure regulator. It is absolutely the way to go.
His lady is very nice and for sure makes this video even more helpful for us viewers, you guys make a great team. Keep up the great work , thank you both for the information and the great video!
I bought an rsx cxracing turbo kit with the 11 gauge manifold for my ep3 k20a2 unopened. I changed the wastegate to a 45mm turbosmart gen 5, bov to a tial rep, even kept the old cast gt35 with .63 hot side that came with the kit and still made 450whp 313 tq @ 15lbs on a hot humid day on pump gas on a returnless fuel set up. Would’ve made more if it had an rbc on it. This is relatively the same kit and prolly spent less than I did for better stuff, awesome video!
wwhat size injectors did you have and brand
@@adamquinn4865 id1050x on a returnless setup. But I recommend going a bigger injector with a return set up if you plan on e85
@@slickproductionsTV how's the lag on those Chinese turbos as i heard they're lazy to spool up and what rpm are you on full boost
@@alitoroganan2442 seen a RUclipsr use it and it was quick he pushing like 480 and he gaps
One of the best, informative videos on a complete "put it together yourself" kit. I look forward to becoming a customer. Thank You!!
Thank you for pointing me in the right direction for my first turbo build
Man this is what I been waiting for. Awesome work as usual. Can we gets links to all these?
Thank you for the video. I'm currently getting parts together for my k24 turbo build. It's taking some time to get it all, and I have forgotten a few things, but this video has been quite an eye-opener. I'm in Australia and get most, if not all, my parts from eBay but it can be hard at times to know what to get and if it's going to be what I actually need as this is the first time turbocharging a car or anything for a fact so thank you again you've been very helpful.
Super happy I found your RUclips channel. I have always wanted to do a Civic EG K-Swap & you dropped a wealth of information. Thank you brother 🙏🏻
Nice indepth video Hunter, take your time with this series, I think the K platform could make your channel blowup if done right!
Huh... How you going to tell grown-ass man to take his time. Your comment is just... Just meh.... Honestly you haven't seen how many videos the guy has made. Hundreds and hundreds of them
Yes we need a build series on this 🙌
Did the 1320 people stop sellin stuffs? i cant seem to find them on ebay
Thanks for the info once again.You should really do the driveway build!
You did good camera woman! I blame the ghetto camera too for the zoom issue
Nice kit u put together. I think it’s best to buy parts individually when putting a kit together as u can customise it. That’s what I did with mine. Wasn’t for a K, something else.
Your vedios never get old bruhh. U have came a long ways in a short time u should be proud
Appreciate you!
Your a straight up dude no bs, learned a lot from u i hope u keep at it
So much info in one video. Awesome! Thanks for this!
nice video!.. wish i would have seen this BEFORE i pieced together my turbo kit! First time I have heard of potential issues running a tct plate oil return. thanks!
Tip: Use a ratcheting clamp to help put the wastegate back together.
The BOV you show is the gen 2 copy. Even the authentic Tial BOV has problems. Lately you have been getting the gen 1 knock. They are extremely good👍The wastegates you sell are also great performers and very cost affective 🤗
Aren't you gonna run a full exhaust? I want to see the downpipe and etc process. Although, PLM makes a 2 piece V-band 3" downpipe that would possibly fit. It has a flex pipe and all.
Christine should be your camera woman for all of the videos! It's different watching you being filmed vs random selfie mode.
Yes I will be running a full exhaust and I agree Kristine makes all the videos better!
Very informative video Hunter! Thanks and can't wait for the build and tune series 👍
Please do a video series of the turbo kit build on the internet.... You will teach many people alot 🙏🦾
Would love to see a install video, im goin to be doing a similar setup on my eg
Will do!
Yes, make it a series.
Every listing I'm seeing for a 1320 manifold has been taken down.
I need a turbo for my K24A2 CRX. I'm gonna start piecing it together. Any recommendations? My engine is stock.
Glad it didnt sell and you are keeping it. I would also like to see you do it at home in your driveway and garage. Ya haven't really did a car build at home in a long time especially the new place.
Did 1320s ebay shop close down? I can't find any products listed for them. Losing my mind over this!
Currently doing this to my b series crx in my driveway, so I vote take it back to the roots lol
Nice video for this turbo setup..! Great job and great info. 👍
I'm just here for Christine's SASS 😂
Awesome video hunter. Can’t wait to turbo my daughter accord.
Thanks for the video. Would you recommend another brand like jackspania now that 1320 isn't available on eBay anymore? I know you're testing a plm manifold in a newer video but those only come with a t3 I think? Anyways love the videos man!
Will this fit my k20z3
I've had bad luck with Competition Clutches.
Funny you are almost selecting the same parts I usually do. However I prefer turbosmart/ GFB wastegate and prefer HKS bov, I’m going to run GTx3582R myself but yes definitely makes sense thank you!
Do you have to run water lines for the ball bearing turbo? Or just plug the hole?
I need similar setup but the other direction as I’m rwd 😅
Let’s see a single cam build hunter!! Not many out there to see.
I’ve done so many of them already I’m kind of burnt out on them. Check my channel out and see tons of them.
I really appreciate this video!
Cut! 🤣. Good video. Definitely film and build the integra in the driveway. Your body is gonna be pissed when u get done rolling around and all the up and down. Keep pushing.
One more new sub k owner here let’s go men you are top
My man!!! Ballpark what can I expect to pay for a set up like this for the k24?
Can I run this stock motor trans etc? What else do i need to comfortably the power ?
What about the K24z7?
Great job fella 👍🏻
Good video bro such as good inf this its the perfect set up
What compression did you run on the Integra build?
Have you ever ran something like this on an k24a4?
Ebay ftw!! Amazon sucks lol 😆 awesome video. Those parts look super nice.
yo this is amazing if there was any way you could do a similier thing for a b sieres setup that would be amazing!!
I have done it for my crv turbo build
Just now finishing up my k24 5th gen prelude awd. Can you recommend a turbo kit for this car which that is my next step
I like ebay too bro. Old school fs.
how laggy is this setup for a k24a3? At what rpm will it hit boost/ start spooling?
Very informative thank you for sharing
Hi Mrs mint very informative. Keep doing it 💪 👏 🙌
I would buy a kit if you had one bro 😎 but ac would be nice lol 😂
Hell yeah. Let's go!
does it matter what type of honda you get the manifold for
i can’t find the 1320 manifold anywhere, what would be a good alternative option?
Could you put it in into natal so if I get the car to you
Thank you for the video, Your women sounds hot, good for you. Building 96 Ek hatch K24a2 pushing 220whp all motor atm gonna give this 1320 headers and I seen they have innercooler and piping on there site now too a try. As for turbo I wanna push 400whp give or take. So I’m not sure on a quick spooling turbo 6262 your using looked to big but I’m not sure.
awesome info! how much would you sell a kit like that if you put it together? MY son and I are doing our first turbo as a projet but have no idea lol!
have you used those blocks for for the oil pressure switch? I used one to mount a gauge for oil pressure and the bastard was reading 0 at idle on a d16, I now have a sandwich plate with oil temp, pressure and oil feed and everything is normal
Yes
Hi just saw video loved it I follow you I'm subscribed to your Channel how much is your turbo kit for my ep300 Civic with RSX base motor in it
What size throttle body you recommend on this setup?
What threads are on the water side of that turbo 66mm ball bearing turboi bought one from you but I can find the proper fitting
It’s 3/8npt however I don’t run the water lines I just leave them open.
i have a failed speedfactory map sensor f/b/d type. it leaks air and vaccum through it's construction, where the plastics were not glued good enough. And I don't know where to get my waranty. Also speedfactory looks way cheaper than omni
I haven’t had any issues to date but I’ll keep an eye out for sure. Thanks for the heads up
will this fit a k20a6 from a cl7 honda accord
Great info
Can’t find that 1320 manifold anywhere
On those vs turbos do you drill and tap the compressor housing for boost control?
No I just tap the intercooler pipe instead. I show this on the future videos building this car
I'd like to do a k24 turbo with my 8th gen unfortunately it's automatic.
got any links to all these parts?
What ever happened to this kit?
1320 v1.5?
good video but like where are the links to everything you got?
I mentioned in the video the places I got the stuff. The links are listings on eBay are forever cycling and changing unfortunately. This should still get you in the right direction!
Have they stopped selling/mfging this manifold? Can't find it with a google search, don't see a link, not on huntertuned and don't see it by searching manifold or sidewinder on 1320 either.
I’m not sure. Just search k20 turbo manifold on eBay and pickup the rev9 one they are super similar just different raw finish. Here’s a link www.ebay.com/itm/272845314360?hash=item3f86d91938:g:-4IAAOSwqwhdux5x&amdata=enc%3AAQAHAAAAoHy0UZuwRRl37JC8AhwFaHcox7JDmLZJjiYpZESFqzc4i59K5PWbD6wtYNEemSlyhjo7YC2ILu4A4gwnrNw328xbfRiYZvgyaP3SEuOEj9dUcOXCtM5%2BlCnYSABZi9DCeMKz8z7N3Li9wKlCAueW8IaJ%2BB7a7R%2FfdGzR1U2%2BfxWvr2I5w%2FM3BkMEwnt5gIUIHdclHpZzO4xn3sIPOaNw7wQ%3D%7Ctkp%3ABk9SR6j08LfzYA
@@HunterTuned i did see the rev9, they have mixed reviews on some of their manifolds on other cars about the welds and rough edges inside the manifold + slag. I’ll probably take my chances though Bc it’s that or the cx racing kit with the down pipe for me lol. Appreciate the response.
@@ParadoxSypher I haven’t had any issues with the rev 9 ones. Yea they are not as pretty but they are durable
So what ecm/ stand-alone are you running? Thanks for all the info
I have a kpro Hondata ecu
@@HunterTuned Bought one set up or socketed your own?
Stock internals?
How do you feel about anti Serge turbos with no bov? , (Not my idea)
I always run a bov
Canadian Squidward
Hi Im interested in the VSR 58/55 Dual Ball Bearing Billet on your website, I have a 1320 topmount for my B series, I need to know if the dual vband model will be compatible with my manifold. Could you possibly measure the vband inlet flange?
The vband inlet flanges are 2.5 inch and the outlet is 3 inch
@@HunterTuned Thank you
now if I can just find a MR2...
Do the build in the driveway
Where can I get a 1320 manifold?
Just buy the rev9 it’s the same thing 1320 has been out for a bit now
Which one is the dual ball bearing
All I see is journal and ball bearing no dual ball bearing
They are dual ball bearing.
dont be surprised if that manifold still creeps.
2nd from the UK
🔥🔥🔥👍💯
Would this stuff fit on a 2003 K24 CRV?
Not sure haven’t turbo a k series crv
@@HunterTuned I got one for 300 bucks that’s begging for a manual swap and turbo lol
lol that’s why i’m here
3RD From NC