Finally!! I've been trying to find out about these "cooled" seats. Mine aren't working so I'll check the fuse and then the motors. Thank you for this awesome video. You saved me so much. 2019 Ford Explorer. This vet salutes you.
Thank you very much for this great detailed video. It saved me $2500 from ford fixing it. I zip tied the Ted up to the bottom of the seat where the white brackets broke off.
Thanks so much for the video and the instructions. This video was the only one I could find that had the same year and make. I was able to fix my 2016 Ford Explorer Sport with the exact same process. In case anyone is reading this looking for similar instructions. Slight differences, the seat back did not unzipper, so I had to reach in and maneuver under the seatback. Under the seat there was a 3rd screw holding the front of the blower module in.
2019 Raptor, just bought it and the upper blower motor works but it makes a notice as if the fan is hitting something while spinning, lower motor does nothing and the heated seats light up on dash but that’s it. Should I bother doing this myself or take it to the dealership? Love the videos man! Thanks
This is a very helpful video and well done. I have a 21 F150 XLT with cloth and heated front seats. I'm going to have leather seat covers installed with perforated inserts. I want to make the front seats cooled because I live in the south. I drove a 2020 SUV for a year with heated and cooled front seats and the cooling was great for summer. My question is, do my heated seats have TED's mounted in them for just heat, or can they be used for cooling if I put in the pass thru vent foam and perfed leather inserts and mod the wiring? Or do I need to replace my TEDs with other OEM Ford TEDS like u are showing that can heat and cool?
Did you ever install m ventilation? O got a 2021 with same heated cloth seats that I just purchased the lariat leather for and want to add ventilation. Wondering if you can give me any advise.
No I never did because I decided I like the cloth better. I had a maxed out Highlander before the 150, that had leather with the TEDs. The seats look and smell great and the TEDs worked very well and fast, especially on a hot day when u first get in the vehicle. The cooling is instant. The replacement leather covers are better than the OEM leather and some companies make them for the owner to put on. If u r good with working on cars and things, this should not be a big deal. If u go with Katzkin, they only offer professional installation in the price. Might take you 3 times longer than a professional, but so what. The stock heating elements in the OEM cloth seats will not work with the TEDs. The TEDs are a different animal and very efficient. @@jmjm3543
Thanks for all your videos, in my case, I have a 2018 f150 Lariat. The cooling system is working but not the heat. The ligths go on in the dash but no heat on the driver seat. Any advise? Thanks again
Yeah you probably have some kind of blend door actuator problem or your HVAC control module needs to be reprogrammed or there's an issue with the HVAC control module and at this point you're going to have to try to check for codes in the HVAC system and probably something's going to have to be replaced it's not going to be a typical at home fix
i'm having a similar issue where my driver heated seat wont turn off i think it is a short of some kind but my ground wire on my scme is burnt out im not sure if that is the issue but even with the scme unplugged sometimes it still turns on
2015 f150 lariat how does the bottom cushion heat up I changed my cushion but didn’t see no heater element on seat cushion please help me they used to work burnt the ground on the hardness updated it and now only passenger side works but the minute I turn on the driver side passenger side stops working
I did not realize what these units were. I purchased a '50 project truck and found these connected to the defrost ports, but I don't know how to wire them up. If you can help, I most certainly would be grateful,..thankyou!
Is the TED unit responsible for heat in the seat back and the seat bottom? (One TED for each) As opposed to the copper heater element strips lightly glued to the seat cushions? The TED units suck up cool air from rear console vents and blow it up your tail end? I own 2017 Ford F250 Super Duty Lariat with heated and cooled leather seats. Getting ready to tackle the diagnostics of the two TEDs on driver seat using Forscan.
Yeah more than likely you're going to need to install a new heating module which is the whole entire assembly that I show in this video because it has a overtime condition that it experiences and then it just continues to fault out even when it's not over temp
Hi there, great Video. My 2017 Ford Edge UK has suffered a similar problem as the one in your video. Lights light up on the buttons but no heat or cooling. Back rest motor seems to work for approximately 30 second then nothing. The bottom motor will not work at all. I follows you video to replace the bottom motor but it has made no difference. Had the codes read and it says drivers seat control module earthed to ground? Do you think replacing the module will need replacement and if so, do you have to program the new module into the car or are they plug and play? Thanks for your help. Andy. PS it’s only the drivers side, passenger side works fine.
@Andrew Bell did you ever replace the driver seat module? If so did it solve your problem? I have a 2016 ford explorer sport with the same exact problem!
2018 Ford Fusion top blower - Do you know how to take the leather off when it looks like it molds all the way around the seat back? Mine does not unzip like in your video and it's hard to get to otherwise.
I just found your channel. I recently bought an F150 Power-boost XLT, that has heated seats for the driver and passenger only. How or would it be hard to add cooling seating as well. I have the cloth seating. Thanks for you input.
You would have to change module programming you would have to swap out the front control interface the whole Center stack to add to cooling buttons you would have to change the seat covers it's a big process
I think you can but the radio bezel around it where the air conditioner controls have to be changed there's like so much that has to be changed in order to make that work it just ain't worth it but I guess that's up to the person that owns the vehicle front control interface module needs to be changed see if the heated and cooled buttons
Thank you just watched the video im gonna wait til I get the passenger seat to see if it makes the same noise on the back rest. There are two connector under the seat on mine there is two connector on the seat but on the body side there is one connector more of an oval shape but I don't have the square connector what does that square connector for? The connector number c3052
Yeah that's just the air rushing through the back of the seat and there's less stuff in the way right there so that's normal but if it was rattling that would be bad yours isn't doing that which is okay
Does the 2018 ford explorer have heaters in the back or just on the seats, I have a limited edition with hwated and cooled seats and my wife is saying the drivers seat isn't warm like it used to be
Some have just bottom some have both Do you have heated and cooled seats? If so it should be yes and the button that turns your seats on and off will have arrows on the bottom or through your radio screen indicating arrows of flow
My 2017 Mustang, heating ass passenger element just heat a little bit. I check all my fuses and conectors look good. Should I just replace it for a new one ?
I don't have access to just look up part numbers whenever I want I have to like go to the parts department give them a VIN have them look through everything just so I can find out exactly what I'm looking for and it's kind of a chore sometimes to do that so I don't have a program that I can just look on my phone or my computer to figure out what those part numbers are
I had that burnt SCME module port, and i have it shifted to the other ground pin. It worked for 2-3 years. Then after this winter, heated/cooled stopped working. Changed to a new SCME module, and it's still not working. Both button selections illuminate for both seats, and no clicking/whirring sound happens. I checked my 15 amp before and it was good. Thanks for pointing out the other 30 amp, I'll be checking it later. If both fuses are good, what's the possible problem for it?
@@FordBossMe so i thought about unplugging/replugging the TEDs for both seats, then went back to see if my ground pin has loose contact. Pulled out the female and reconnected the wire, after attaching the harness back I made sure to push the female in with the voila! A happy boy on this rainy day to have my heated seats back, prepping for the frigid winter months. Thanks for the vid! Do you happen to have a troubleshooting for the horn not working? Checked the fuse already and it's still good.🤷
I just purchased a 2018 F-150 SuperCrew. My drivers seat fan makes a whine when set to high or medium. I haven't crawled in the backseat yet as to try and isolate which blower is making the noise. (my hearing sucks). The passenger side is okay. I don't suppose I can get in there and lube which ever motor it is, can I?
Im looking at swapping the seat base from a 2020 lariat to a 2023 to get 10way power for the passenger seat. Have you seen anything that might prevent that from working?
I don't typically get involved with that type of stuff so I would not be able to guide you on that currently in the future as I learn more about that I might be able to help but right now I can't help in that area I just don't do stuff like that most of the time so I don't have the experience
Picked up a 2023 and im guessing 21+ they dropped 10way on the passenger side is why i asked. One of those honeydo if possible things. I am likely going to have to get parts and see what works. Thanks for the help
I have the same code, but on my 2009 Lincoln MKZ. DCSM computer is fine, I replaced it and it's fine. Neither seat is getting any air with the ventilated seats turned on (it sounds like the fans are trying thought). The passenger seat's warmer is working though. Do you think trying this fix (with the MKZ specific parts of course) would fix the ventilated seats problem?
Hi ,nice video very useful, on my driver seat work only in cold air.when I turn on heat seat fan works for a few minutes then shut off by itself. I removed the seat fan from passenger side to try it in Driver side but still doing the same. Do you have any idea what is wrong please.?
I think it will work I don't know what to tell you on that man a lot of this is me showing you guys and then you guys using whatever I show you to figure out there is no kind of definitive answer a lot of people ask me very specific personal questions to their vehicle and most of the time I can't answer it because I'm just showing you what I'm particularly dealing with hoping that it can help you
How do you replace the circular filter under the heated/cooled seats on the Mustang? I found the filters, which are filthy but don’t know how to get them off. I don’t want to break them.
@@FordBossMe thanks for replying 🙂I have been scouring the internet on this one but cannot find a thing on how to replace them (I have a 2019 Mustang) I’ll take it in to my local Ford guys, they have been really good with our vehicles. Also, thank you for all your well made and very informative videos. God bless and take care!
Hello I have a 2012 f150 fx4 the driver seat works with the cooling system and heat but doesn't push much air at all the passenger seat work great is there a reason why this is happening or do I need to replace the moters also what do you mean by look for a collapse seat Thanks you in advance
After you unplug everything and then plug it back together it's going to take several key cycles for the airbag light to go away sometimes but it's typically the first b-cycle the airbag goes what if it wasn't on before
Make sure everything is plugged back in properly and make sure on the airbag connectors if there's locking tabs make sure they are pushed back down in their spot completely
@@FordBossMe I'm trying replace the two fans in my 2016 explorer, you don't have a video for that. Is the seat wiring the same as the F150. Thanks for responding
I have a 2011 F150 platinum and my driver seat stopped heating but the passenger seat worked. I replaced the control module under the passenger seat and neither seat works now. All wire connections are secure. I bought the module from the dealer, so it should be the correct module. Is there any programming required after replacing the module? Can FORSCAN do the job? Thanks.
Hey @ford boss me, so I got the thing unplugged FINALLY! And guess what? The ground wire shorted out which was why the plug was so damn hard to get off! What is my remedy here? Can I move this ground wire over and regain connection? If so, how do the wire connectors pull out of the back of the plug??
A shop replaced the heating/cooled seated module and pigtail under the passenger seats. I got the truck back and the front windows, running boards, or AC wouldn’t work. AND the seats still didn’t work. What would cause this?
Unhook the battery cables for about 15 minutes and then hook them back up and see if everything comes back online and if you have a scan tool reset the BMS
I'm not on the vehicle right now so I don't remember exactly what type of plug it has I think if you look at it you'll be able to see sometimes it's very difficult to push the tabs in to remove them and specifically I don't know what plugs you are talkin about
My 2017 Lariat seats are very slow to heat and the cooling is almost non-existent. I've never noticed a fan sound, even when brand new when they worked perfectly. Could it be motors?
I have a 2015 explorer and the cooking unit for the bottom looks identical. However, I see that when the ac seat is on a lot of air just blows out against my calves through a duct right after the blower? Is it supposed to not connect to anything? I know one end goes up into the seat but the other just blows out under the seat? Why?
@@FordBossMe ah that makes sense. Am I supposed to be feeling any air out of the seat perforations or is it supposed to just be channeling through the foam to cool the foam itself? Thanks for your feedback!
Unbolted the passenger side seat from the floor flipped er up and didn’t seem and burn marks in the connector under the seat that goes from both seats, 30A fuse under the engine bonnet is good, now it seems I only hear the fan on under the passenger seat when I have the ac seat function on both… I’m clueless!
Finally!! I've been trying to find out about these "cooled" seats. Mine aren't working so I'll check the fuse and then the motors.
Thank you for this awesome video. You saved me so much. 2019 Ford Explorer.
This vet salutes you.
Thank you very much for this great detailed video.
It saved me $2500 from ford fixing it. I zip tied the Ted up to the bottom of the seat where the white brackets broke off.
Thanks so much for the video and the instructions. This video was the only one I could find that had the same year and make. I was able to fix my 2016 Ford Explorer Sport with the exact same process. In case anyone is reading this looking for similar instructions. Slight differences, the seat back did not unzipper, so I had to reach in and maneuver under the seatback. Under the seat there was a 3rd screw holding the front of the blower module in.
Good to know. 18 explorer here
Are there heating elements or do the fans also heat?
Thanks. I would of done both but due to budget crap this spring I opted to try back only.
Well done. I’m adding fans to some seats and I’ve learned more from you than the install video!
Glad I could help
Unreal info man !
2019 Raptor, just bought it and the upper blower motor works but it makes a notice as if the fan is hitting something while spinning, lower motor does nothing and the heated seats light up on dash but that’s it. Should I bother doing this myself or take it to the dealership?
Love the videos man! Thanks
what was the TSB number u mentioned? I have a ‘17 Fusion and this applies to me
This is a very helpful video and well done. I have a 21 F150 XLT with cloth and heated front seats. I'm going to have leather seat covers installed with perforated inserts. I want to make the front seats cooled because I live in the south. I drove a 2020 SUV for a year with heated and cooled front seats and the cooling was great for summer. My question is, do my heated seats have TED's mounted in them for just heat, or can they be used for cooling if I put in the pass thru vent foam and perfed leather inserts and mod the wiring? Or do I need to replace my TEDs with other OEM Ford TEDS like u are showing that can heat and cool?
Did you ever install m ventilation? O got a 2021 with same heated cloth seats that I just purchased the lariat leather for and want to add ventilation. Wondering if you can give me any advise.
No I never did because I decided I like the cloth better. I had a maxed out Highlander before the 150, that had leather with the TEDs. The seats look and smell great and the TEDs worked very well and fast, especially on a hot day when u first get in the vehicle. The cooling is instant. The replacement leather covers are better than the OEM leather and some companies make them for the owner to put on. If u r good with working on cars and things, this should not be a big deal. If u go with Katzkin, they only offer professional installation in the price. Might take you 3 times longer than a professional, but so what. The stock heating elements in the OEM cloth seats will not work with the TEDs. The TEDs are a different animal and very efficient. @@jmjm3543
Just came across this as my seats stopped cooling and heating. Fan runs but no air movement. Will definitely look to go down this road. Thanks!
I have a couple other videos on the same issue as well make sure you check them out because airflow could be because of a collapsed seat
Thanks for all your videos, in my case, I have a 2018 f150 Lariat. The cooling system is working but not the heat. The ligths go on in the dash but no heat on the driver seat. Any advise? Thanks again
Yeah you probably have some kind of blend door actuator problem or your HVAC control module needs to be reprogrammed or there's an issue with the HVAC control module and at this point you're going to have to try to check for codes in the HVAC system and probably something's going to have to be replaced it's not going to be a typical at home fix
i'm having a similar issue where my driver heated seat wont turn off i think it is a short of some kind but my ground wire on my scme is burnt out im not sure if that is the issue but even with the scme unplugged sometimes it still turns on
2015 f150 lariat how does the bottom cushion heat up I changed my cushion but didn’t see no heater element on seat cushion please help me they used to work burnt the ground on the hardness updated it and now only passenger side works but the minute I turn on the driver side passenger side stops working
2017 Ford edge titanium. Driver seat fan kicks on then off within 2 minutes. Any idea what the problem is?
I did not realize what these units were. I purchased a '50 project truck and found these connected to the defrost ports, but I don't know how to wire them up.
If you can help, I most certainly would be grateful,..thankyou!
I've never looked into the wiring
Is the TED unit responsible for heat in the seat back and the seat bottom? (One TED for each) As opposed to the copper heater element strips lightly glued to the seat cushions?
The TED units suck up cool air from rear console vents and blow it up your tail end?
I own 2017 Ford F250 Super Duty Lariat with heated and cooled leather seats. Getting ready to tackle the diagnostics of the two TEDs on driver seat using Forscan.
Some of them yes
I have a 2018 f350 platinum driver seat the heated light works fan on bottom kicks on then back off no heat at all on driver seat but pass works fine
Yeah more than likely you're going to need to install a new heating module which is the whole entire assembly that I show in this video because it has a overtime condition that it experiences and then it just continues to fault out even when it's not over temp
Awesome thankyou very much
Does the module on the passenger side control both sides
Nice Repair 👌
Mine the seat cushion get hot but the back reset don't warm up could it be the heating pad on this ted module there no dtc
Yes it could
Hi there, great Video. My 2017 Ford Edge UK has suffered a similar problem as the one in your video. Lights light up on the buttons but no heat or cooling. Back rest motor seems to work for approximately 30 second then nothing. The bottom motor will not work at all. I follows you video to replace the bottom motor but it has made no difference. Had the codes read and it says drivers seat control module earthed to ground? Do you think replacing the module will need replacement and if so, do you have to program the new module into the car or are they plug and play? Thanks for your help. Andy. PS it’s only the drivers side, passenger side works fine.
I'm pretty sure it's a plug-and-play module but even if it's not you still got to do it you know
@@FordBossMe thanks so much for quick reply. I’ll get a replacement module. Hopefully that works 🙏🏻. Don’t know what else it could be 😩
@Andrew Bell did you ever replace the driver seat module? If so did it solve your problem? I have a 2016 ford explorer sport with the same exact problem!
2018 Ford Fusion top blower - Do you know how to take the leather off when it looks like it molds all the way around the seat back? Mine does not unzip like in your video and it's hard to get to otherwise.
Yes you have to go under the seat and unhook it and then you roll it up as one piece like a fruit roll-up
I just found your channel. I recently bought an F150 Power-boost XLT, that has heated seats for the driver and passenger only. How or would it be hard to add cooling seating as well. I have the cloth seating. Thanks for you input.
You would have to change module programming you would have to swap out the front control interface the whole Center stack to add to cooling buttons you would have to change the seat covers it's a big process
There's a lot involved it's very expensive
@@FordBossMe wow 😯, sounds like to much work. It would be very expensive to do something like that, right ?
What if you buy raptor seats with all that in it? Will you be able to add them into a regular xlt f150
What if you buy raptor seats with all that in it? Will you be able to add cooled seats function into a regular xlt f150
I think you can but the radio bezel around it where the air conditioner controls have to be changed there's like so much that has to be changed in order to make that work it just ain't worth it but I guess that's up to the person that owns the vehicle front control interface module needs to be changed see if the heated and cooled buttons
Thank you just watched the video im gonna wait til I get the passenger seat to see if it makes the same noise on the back rest. There are two connector under the seat on mine there is two connector on the seat but on the body side there is one connector more of an oval shape but I don't have the square connector what does that square connector for? The connector number c3052
Off the top of my head I have no clue I'm in the middle of pulling this engine apart I just made that turbo video for you
@@FordBossMe thank you I will be on a look out for it. I'm uploading a video of what I'm talking about once it uploads I will send you link
@@FordBossMe here is the link to the video of the connector and how noisy the backrest vent is ruclips.net/video/KlUgHGtwhIM/видео.html
Yeah that's just the air rushing through the back of the seat and there's less stuff in the way right there so that's normal but if it was rattling that would be bad yours isn't doing that which is okay
@@FordBossMe thank you for taking the time watching that video and answering my questions. You are a great man thank you for everything you do
Does the 2018 ford explorer have heaters in the back or just on the seats, I have a limited edition with hwated and cooled seats and my wife is saying the drivers seat isn't warm like it used to be
Some have just bottom some have both
Do you have heated and cooled seats? If so it should be yes and the button that turns your seats on and off will have arrows on the bottom or through your radio screen indicating arrows of flow
My 2017 Mustang, heating ass passenger element just heat a little bit.
I check all my fuses and conectors look good. Should I just replace it for a new one ?
If it was heated and cooled then yes replace the blower heater
@@FordBossMe thanks Boss!
Great video and instructions! Are those parts compatible with 2010 Lincoln Navigator L? If not, could you send me the part numbers for both motors?
I don't have access to just look up part numbers whenever I want I have to like go to the parts department give them a VIN have them look through everything just so I can find out exactly what I'm looking for and it's kind of a chore sometimes to do that so I don't have a program that I can just look on my phone or my computer to figure out what those part numbers are
@@FordBossMe Thanks for quick reply! I found the parts for my vehicle, they cost about $310 for bottom, and $115 for back.
I had that burnt SCME module port, and i have it shifted to the other ground pin. It worked for 2-3 years. Then after this winter, heated/cooled stopped working. Changed to a new SCME module, and it's still not working. Both button selections illuminate for both seats, and no clicking/whirring sound happens.
I checked my 15 amp before and it was good. Thanks for pointing out the other 30 amp, I'll be checking it later. If both fuses are good, what's the possible problem for it?
Did you check the connections to the main module
@@FordBossMe so i thought about unplugging/replugging the TEDs for both seats, then went back to see if my ground pin has loose contact. Pulled out the female and reconnected the wire, after attaching the harness back I made sure to push the female in with the voila!
A happy boy on this rainy day to have my heated seats back, prepping for the frigid winter months. Thanks for the vid!
Do you happen to have a troubleshooting for the horn not working? Checked the fuse already and it's still good.🤷
@@deadpool_f150 apply power and ground to the horn individually and see if it blows 99% of the time the horn is bad
I just purchased a 2018 F-150 SuperCrew. My drivers seat fan makes a whine when set to high or medium. I haven't crawled in the backseat yet as to try and isolate which blower is making the noise. (my hearing sucks). The passenger side is okay. I don't suppose I can get in there and lube which ever motor it is, can I?
No you'll have to replace
So the two parts you replaced are seat back blower and seat bottom blower? I was blocking airflow and drivers side not working now. Thanks
Seat back and seat bottom and you also have to make sure they're lined up perfectly with the Interpol insert hole going into the foam in the seat
Are the backs failing the most? Or either one may fail in time. My back went too.
The backs the most
Im looking at swapping the seat base from a 2020 lariat to a 2023 to get 10way power for the passenger seat. Have you seen anything that might prevent that from working?
I don't typically get involved with that type of stuff so I would not be able to guide you on that currently in the future as I learn more about that I might be able to help but right now I can't help in that area I just don't do stuff like that most of the time so I don't have the experience
Picked up a 2023 and im guessing 21+ they dropped 10way on the passenger side is why i asked. One of those honeydo if possible things. I am likely going to have to get parts and see what works. Thanks for the help
I have the same code, but on my 2009 Lincoln MKZ. DCSM computer is fine, I replaced it and it's fine. Neither seat is getting any air with the ventilated seats turned on (it sounds like the fans are trying thought). The passenger seat's warmer is working though. Do you think trying this fix (with the MKZ specific parts of course) would fix the ventilated seats problem?
I mean it sounds like it
@@FordBossMe i'll give it a shot. back to the scrap yard I go!
Is it the same for a 2012 F150 FX2 for both heated and cooled seats?
I think
2015 f 150 driver side seat don't heat back heats but not that actual seat cooling works fine ideas?
Check the connections under the passenger seat and make sure everything's good and none of the pins are burned if not the module has to be replaced
I say the module I mean the blower in the seat back
@@FordBossMe ok will do . thanks for the quick reply and advice
Hi ,nice video very useful, on my driver seat work only in cold air.when I turn on heat seat fan works for a few minutes then shut off by itself. I removed the seat fan from passenger side to try it in Driver side but still doing the same. Do you have any idea what is wrong please.?
I think it will work I don't know what to tell you on that man a lot of this is me showing you guys and then you guys using whatever I show you to figure out there is no kind of definitive answer a lot of people ask me very specific personal questions to their vehicle and most of the time I can't answer it because I'm just showing you what I'm particularly dealing with hoping that it can help you
How do you replace the circular filter under the heated/cooled seats on the Mustang? I found the filters, which are filthy but don’t know how to get them off. I don’t want to break them.
I've never tried
@@FordBossMe thanks for replying 🙂I have been scouring the internet on this one but cannot find a thing on how to replace them (I have a 2019 Mustang) I’ll take it in to my local Ford guys, they have been really good with our vehicles. Also, thank you for all your well made and very informative videos. God bless and take care!
I live in Arizona, are the heated adn cooled seats worth getting?
No
Hello I have a 2012 f150 fx4 the driver seat works with the cooling system and heat but doesn't push much air at all the passenger seat work great is there a reason why this is happening or do I need to replace the moters also what do you mean by look for a collapse seat
Thanks you in advance
Cushion underneath is probably blocking airflow and came out of adjustment
Will there be any SRS codes after replacing the T.E.D. and reconnecting the seat? (under normal circumstances)
After you unplug everything and then plug it back together it's going to take several key cycles for the airbag light to go away sometimes but it's typically the first b-cycle the airbag goes what if it wasn't on before
Make sure everything is plugged back in properly and make sure on the airbag connectors if there's locking tabs make sure they are pushed back down in their spot completely
Thanks for the great video. I repaired the driver's seat in my '16 Limited today. No SRS codes and everything works as it should.
Would this blower replacement be same for 2016 Explorer
Similar but I have an explorer one in the library, type in Google search FORD BOSS EXPLORER HEATED SEATS
@@FordBossMe I'm trying replace the two fans in my 2016 explorer, you don't have a video for that. Is the seat wiring the same as the F150. Thanks for responding
I have a 2011 F150 platinum and my driver seat stopped heating but the passenger seat worked. I replaced the control module under the passenger seat and neither seat works now. All wire connections are secure. I bought the module from the dealer, so it should be the correct module. Is there any programming required after replacing the module? Can FORSCAN do the job? Thanks.
I didn't have to reprogram the module when I did one on the older ones but also make sure you check the fuses these can be tricky to diagnose
Is it the same procedure for Explorers?
One of the seats has a module under it
Do you have video how to replace cushion seat on f150 with heat and cool seats.
I have to replace my left side cushion is destroyed
Thanks
Pretty sure it's in the library basic search
ruclips.net/video/VktAA1V0Krs/видео.htmlsi=Xj2aQ7p4n289rI6z
@@FordBossMe thanks
Hey @ford boss me, so I got the thing unplugged FINALLY! And guess what? The ground wire shorted out which was why the plug was so damn hard to get off! What is my remedy here? Can I move this ground wire over and regain connection? If so, how do the wire connectors pull out of the back of the plug??
Yes you can if the terminals are salvageable
The center insert unsnaps and there is a center tab the releases the pin
A shop replaced the heating/cooled seated module and pigtail under the passenger seats. I got the truck back and the front windows, running boards, or AC wouldn’t work. AND the seats still didn’t work. What would cause this?
Reset the battery monitor sensor
Unhook the battery cables for about 15 minutes and then hook them back up and see if everything comes back online and if you have a scan tool reset the BMS
How do you unplug those plugs under the seat?
I'm not on the vehicle right now so I don't remember exactly what type of plug it has I think if you look at it you'll be able to see sometimes it's very difficult to push the tabs in to remove them and specifically I don't know what plugs you are talkin about
My 2017 Lariat seats are very slow to heat and the cooling is almost non-existent. I've never noticed a fan sound, even when brand new when they worked perfectly. Could it be motors?
Did you ever find out what the problem was? My king ranch is having the same problem
@@mav4516 never figured it out
On my 2016 the fan comes on quite powerful for a second or two then dies down. Is this normal?
Yeah a lot of them do that and it seems to be normal
Is B111c passenger seat back ted code?
Have to look tomorrow remind me
@FordBossMe much appreciated sir thanks
You should show how to remove those damn connectors on the control module lol. PITA
Look up terminal release tool I had to do mine, had to replace the pigtail all is good now, I just have to get the ac seats working up to par 🤙
What does a dealership charge to do this repair?
Couple hours each seat maybe even up to three or four depending on how bad it is
I have a 2015 explorer and the cooking unit for the bottom looks identical. However, I see that when the ac seat is on a lot of air just blows out against my calves through a duct right after the blower? Is it supposed to not connect to anything? I know one end goes up into the seat but the other just blows out under the seat? Why?
Think about it man you can't have air sucking in if it can't blow out it's an exhaust for the blower
@@FordBossMe ah that makes sense. Am I supposed to be feeling any air out of the seat perforations or is it supposed to just be channeling through the foam to cool the foam itself? Thanks for your feedback!
Is this the same on my 2014 F-150 FX4, the lights come on and I hear it but no heat or cooling?
Could be a seating pad or blower you have to investigate
@@FordBossMe I’m not sure where to start my friend, where would you start?
Unbolted the passenger side seat from the floor flipped er up and didn’t seem and burn marks in the connector under the seat that goes from both seats, 30A fuse under the engine bonnet is good, now it seems I only hear the fan on under the passenger seat when I have the ac seat function on both… I’m clueless!
How do I test if it’s the control behind my touch screen in the dash?