I started having issues with my internet provider router which also is used for wifi when I connected too many devices to it, it would just cut out the whole internet, then i got the deco m4 and all been good so far
We just downgraded our cable package, and along with it lost our gigabit internet service. So the problem (at least for me...wife doesn't notice any difference lol) is the speed decrease & lag. Mind you, I'm not expecting gigabit speeds after getting this, but even 400mbit would be a big improvement.
Looks great, I have a TP-Link RE650 which is enough for the size of my Parisian flat but struggles a bit with French building standards: steel rebar reinforced concrete. The other problem being: in France they are already extremely equipped with 1Gbps and 10Gbps FTTH (80% of the country covered by 2024, for prices as low as 20€/month) with triple and quadruple play set-top boxes from the 4 main national providers containing NAS's and routers. Using a different router can degrade the provider's experience (especially NAS and security systems) and I still haven't been able to find an affordable WiFi solution that can match up with a 10Gbps fiber (the box integrated WiFi is not up to par with the connection). I'm currently getting a steady 800+Mbps in bedroom and living room with the RE650 but a spotty connection, sometimes 300Mbps sometimes giving errors in the bathroom which is behind a corner and an F shaped set of reinforced concrete walls. One other problem in very densely populated cities like Paris is interference, I had problems with my neighbors using a previous access point set that scrambled their connections. I messed up the connection of my neighbors on the 6 sides of my flat and had a lot of complaints but my connection wasn't spotty anymore in the bathroom. So I had to revert back to the RE650 and I'm waiting for a new affordable solution to use the full potential of my fiber line without starting a neighbor's war.
This is probably one of the best, most thought out thorough reviews of a mesh wireless network system I've seen on RUclips. Rock On! I've been debating on upgrading my Wifi system and with Amazon's Prime Day discount on this system your review gave me the information I needed. I work in IT and really appreciated your thought process in putting the video together and going through the advance features was spot on. Great review, keep up the good work!
I have 6 M5s and M9s around my house and I love them! There aren’t any dead spots anymore, and the WiFi is super fast and affordable! Highly recommend.
Thanks for the video. Like most Mesh systems, this one functions best when you use the nodes in AP mode, assuming you have wired Ethernet available in the preferred locations. I appreciate you setting them up in a real-world scenario. I haven't tried this particular system but with every other one I did try, the nodes had trouble seeing each other on different floor of my home of a little over 5000 Sq ft. I suspect mesh is viable in certain environments but not so much for larger, multi-level homes.
This video helped me device on getting these devices. Also appreciate @26:41 when you pop out from behind the plant and continue casually discussing the set up. I will steal the idea of hiding the device in the bamboo planter as it looks great.
just my two cents... I would limit the wifi signal to a zone within my house instead of extending it too far out. this is a very bad idea in terms of securing your network as it will be exposed. I would suggest reducing the power to limit the coverage outside the house or to move the node to reduce the signal too outside. just a suggestion. :)
The only things that are still need to do some work on, it's the ability to manually choose the satellite connections (this is done by software, can't select) meaning that you can have lower Wifi connection because the satellites are trying to connect to the main router instead to the closest satellite unit. The second thing, it's the ability of your item to select to what satellite to connect (same issue). I had to do a lot of arrangements and connect them with ethernet.
The 2 ports on the unit are not an "ethernet input and ethernet output port" they are just ethernet ports that function as input/output in this configuration because they detect that the one port is from a modem and the other port is connected to downstream devices. In your configuration that's a very nice large Tp switch (good choice, lol). All of the other Mesh nodes see only Non-modem direct connected devices. There is no input/output involved.
Honestly, that's the best review of a wifi mesh setup that I've seen. And I've been watching them non stop for weeks. I'm not sure if I'll get this setup, but great review 👍 Got a new subscriber
I went from the original 2*orbi to 3*deco m5, 932mbit down, 520 mbit up from the app ( speedtest on main deco ). Ethernet backhaul 340/300 on WiFi ( not WiFi 6 ) The website on the main deco will show cpu usage, so I used the ISP router to reduce CPU load on the mesh. It went crazy when I knocked the power on the main off, after restart one client m5 went green/red badly, speed through the floor. full reboot to fix, my point being it's hard to diagnose issues, so full reboot if there are. But the flexibility to mix different decos unlike orbi makes it a great alternative, along with no hardware differences main/client.
I have the A3 I believe it's called and looks like the interface is the exact same. I really like the Deco Mesh system and I have zero dead spot I have two devices and my phone seamlessly connects to whichever deco it's near.
I have this mesh WiFi system and initially had some issues with my mesh points disconnecting but after the firmware update everything was great. I bought it for coverage since my home is three levels and 3600 sq ft. I actually bought two sets of two so I have four mesh points. I can cross the street and still get a great signal on my neighbors porch and my entire backyard where I work sometimes in the summer.
I’m surprised your backhaul Ethernet setup only yielded 300+ on the Pixelbook and 700+ on the MacBook. Shouldn’t it be full speed as it’s essentially wired back to source? Great video by the way, very thorough.. appreciate the effort you’ve gone to demonstrating all configurations
I watched a lot of videos regarding TP-LINK in general and this video is by far the best and gives the most information of the features and setup possibilities. Great Job
Great job, Brett! Loving our 2 pack Deco X20. You're right, great value for wifi 6 and very easy to use (10 minute setup). Still have to explore the app more - thanks for the pointers. I did notice basement signal is sometimes a tad unstable, but we haven't used ethernet backhaul, so that could help. Also, our ISP plan 150 down / 15 up, so we often get 200-350 down / 15 up on WiFi. The ethernet cable that comes with the box - not sure if it's the fastest - so could try other cat 5e/6 cables to be sure. And for better coverage or more consistent gigabit speeds, they do have the Deco X60.
I considered reviewing that one but the X20 seems to do a pretty good job. I am about to go with Cat 6 everywhere so I am curious what speeds that will give me.
I love your channel, and I always look forward to your reviews, however as someone who works in I.T. and smart homes I feel that I need to say that just because WiFi 6 exists doesn’t mean everyone needs to rip out their perfectly fine mesh network and run out to buy a router that supports it. The vast majority of people aren’t gonna be saturating their gigabit or multi gigabit internet connection and in day to day use won’t know the difference outside of speed tests. The speed test differences you’ve noted could very well have been found with adding more points or better relocation of them.
Great point. As with any product, if it working right there is nothing to change. I think at this point many some of the 1st gen routers that were out might be going bad, and if you are going to upgrade then it is best to sort of future proof a bit with Wifi 6.
👍👍👍👍very good review of all the functions inside the Deco app. 。 I have TP Link X60/AX5400 wifi 6 with 3-mesh set system installed in my house recently. I am very satisfied with it ! 👍
I just upgrade my modem. I had an old one lying around and decided I should install that to see if it worked, and it did so now I don’t have to pay for the rental each month. Every time I feel like I’m done with upgrading stuff I watch one of your vids and i realize I’ve done nothing 🤣 now I wanna get this mesh system lol
I am confused why you are not getting 800-900 Mbps upload and download on the backhauled ethernet wifi units? Shouldn't you be getting your Gigabit speeds if you have a wired connection? Why would you not be getting full speeds to the other router units?
Good setup video and works fine, BUT, you have several errors in the tutorial oration. 1st. near minute 2 & 3, the 2 ports are not an "ethernet input and ethernet output port" nor a "connection to the backhaul port" the 2 ports are just ethernet ports to add switches/devices to. Comprising your INTRAnet connectivety. The "backhaul" is an internal implementation of an "additional" channel of wifi connectivity so the MESH can be "duplex" in nature allowing simultaneous traffic to do "transmit and receive" traffic simultaneously in lieu of reading waiting on writing (so to speak)..
Lol Mrs TechwithBrett keeping it real " I don't notice anything different than the last internet we had" LOL...can SO identify with this, was like when i was blown away with my LG 55" OLED, dolby vision the lot. I said to my wife, so much better than the HD tv we had before isn't it, " I cant really tell the difference" haha! I am still rockin the orginal Google Wifi, it's a dam solid connection, and i am reluctant to upgrade. Interesting point, about naming the Wifi network with same name and password, would that mean they would all stay auto connected if you use the same name and password, or would you have to re enter the password on every device? Great vid as per mate, keep the content coming!
The devices will connect to any WiFi access point with the same SSID and password, so long as they support the band (2.4 GHz, 5GHz etc). For example, if you take your Chromecast with you somewhere, you can make a hotspot on your phone with the same SSID/Password as your home and it will connect.
Search " describe the "backhaul" concept in Mesh router networks". You will find "..Backhaul is a technical term used mostly in telecommunications. It is a synonym for "backbone". Therefore, when someone says WiFi backhaul when referring to a mesh WiFi system, it means that the backbone of the network is made of direct wireless connections between the nodes of the mesh system .." What you are calling "backhaul is actually "direct connect" not the backhaul that is providing the return channel in your Mesh nodes.
I have ( Tp-Link x60 ) and im very happy , better range and connectivity then Netgear and Asus. not to mention it comes with a bunch of extra controls and device integration glad i switch to tp-link. im getting 855 mbps down and 39.8 up
I use 3-set Deco M5 and 1 Deco E4R in a similar home topology as yours. The experience was great. Eventho it's one of the cheapest mesh system around, the performance was very good with 0% Bufferbloat with very little config to do (previous router i use reach around 5-10% bufferbloat). The AV is also apparently useful in blocking spam for my mom, and its now no longer limited to 3 years. I only hope that it allows a little bit more degree in configuration, for example to select custom WiFi channel.
@@TechWithBrett there’s many script/tool to do network quality testing that I’ve used. For quick quality testing I just use the speed test provided by DSL Reports. It provides bufferbloat testing as well as outright speed and latency. Server selection is a little bit lacking in SEA region so I still use it combined with Ookla’s Speedtest for the download/upload speed. Side tips: The Deco app also have built-in speed test tool that run from the gateway Deco itself. I think it also run on Ookla’s service too so great server selections. It was useful when diagnosing and pinpointing connection issue (it was mostly because my ISP modem/service, but one time the ethernet cable connecting the Deco and switch was broken)
Regarding channel selection, there’s some feature request ticket in their support website, however it perhaps lacking vote. Might be worthwhile to check it once in a while. It was basic option that’s already possible to do in some of their competitions’s system. I know Ubiquiti’s mesh has one. And also a newer password encryption system would be better.
Where did you buy your X20 system? Amazon sells it, but I want to compare prices. (Best Buy doesn't carry it.I) Also, what's the difference between the x20, x40, x60 models? And, how did you decide on the TP Link X20 instead of comparable ASUS routers?
Their is no x40, is x20, x60 and x90. The x20 is sold only on Amazon, the x60 is sold at Costco and the x90 is sold at Best Buy. The x20 and x60 is dual band and the difference is bray the x60 has better coverage and can potentially provide higher speeds. The x90 is a tri band mesh and it can handle more devices that are using the same band at the same time.
With the back hall does it make the signal “equal” between all sections? I’m currently in the planning stage of turning our house into a smart home? Thanks for all your great videos. They have all helped so much
My internet connection is DSL and it is limited to 3 mbps (rural US) but I do use my local network a lot to stream from a local server. Thinking about getting this to bounce the signal out to my barn. I wonder if they have a compatible outdoor mesh point? Currently I use two access points placed on opposite sides of the house and it works well but it'd be nice to get some more outdoor wifi. Great review!
What can I say? Absolutely beautiful video very informative. Could you please explain what all this connections. For instance IOT- device and non-835 I got few of them and I can change your name but I don’t know what they are to change their name. And then it says high priority and if I click on it, he’s asking me for a total bandwidth before using high priority. I don’t understand what it means. Maybe you should make a video and something like this but overall I really like your video. Thank you.
Looks great, I have a TP-Link RE650 which is enough for the size of my Parisian flat but struggles a bit with French building standards: steel rebar reinforced concrete. The other problem being: in France they are already extremely equipped with 1Gbps and 10Gbps FTTH (80% of the country covered by 2024, for prices as low as 20€/month) with triple and quadruple play set-top boxes from the 4 main national providers containing NAS's and routers. Using a different router can degrade the provider's experience (especially NAS and security systems) and I still haven't been able to find an affordable WiFi solution that can match up with a 10Gbps fiber (the box integrated WiFi is not up to par with the connection). I'm currently getting a steady 800+Mbps in bedroom and living room with the RE650 but a spotty connection, sometimes 300Mbps sometimes giving errors in the bathroom which is behind a corner and an F shaped set of reinforced concrete walls. One other problem in very densely populated cities like Paris is interference, I had problems with my neighbors using a previous access point set that scrambled their connections. I messed up the connection of my neighbors on the 6 sides of my flat and had a lot of complaints but my connection wasn't spotty anymore in the bathroom. So I had to revert back to the RE650 and I'm waiting for a new affordable solution to use the full potential of my fiber line without starting a neighbor's war.
Sorry for the double post (other one being as an answer to Brett's comment) but the reply comment won't delete for some reason beyond my understanding.
@@arkbonjangles9984 I started with the Google WiFi years ago, and added 2 Google Nest Wifi to achieve stronger overlapping coverage. The Google Nest is backwards compatible with the earlier Google WiFi.
First of all thanks for the video, Brett. I find your solution very interesting. I just wonder about your router/modem. Is it firewalled? If it is could it interference with the Deco’s firewall?
I'm surprised at how slow these speeds are. I have Zyxel Multy X mesh at my house - which is WiFi 5. I get around 600 down and 400 up consistently. Sure they're a little more expensive.. but still.
Excellent video. I have a Google Wi-Fi mesh system with three access points. It automatically selects 5 GHz or 2.4 GHz, depending on the device. I pay for 500 Mbps download speed from my ISP. I do get 400+ Mbps near the main router, which is next to the modem. The other two access points are connected wirelessly. I only get 90 Mbps download speed at the third access point, which is on the opposite side of the house of the router. Is it normal to have speeds reduced that significant at the third node? My house is not wired for ethernet. I prefer not to wire the nodes to each other. Trying to figure out if I need to purchase a better quality mesh system or if diminished speeds at each node is typical for the majority of mesh systems?
Thanks for the great video! One questions: If I connect every point with a cable using a switch (the same way you did), why does it cancel the mesh? What’s the point of buying a mesh system if it doesn’t act as a mesh?
It cancels the mesh and becomes wheel and spoke which is better in this case because it provides faster, more reliable inter node communication. It's still well worth buying because it creates a single network that allows you to roam between nodes, the same as it would with a mesh topology.
It does still act in the same way as a mesh network only the nodes are communicating with each other via ethernet cables rather than Wifi. I set one of these up in that way just over a week ago and it made a massive difference to my Wifi speed and reliability
Excellent video!!! At the moment I am using the router that came with my ISP. Each desktop computer on my Ethernet LAN has an assigned IP address that I set up in the router. Can I do the same thing with this mesh system?
Question I'm looking at the Orbi satellite, mesh wifi dual band 5g 90.00 Vs. the Google Mesh AC1200 Whole-Home WiFi System 3-Pack 125.00 which overall do you think would work better in a old double wide mobile home with 3 bedrooms looking for your reply, thanks for the great video as well,Kraig Also I can get the TP-link Deco S-4 3-pack for 114.00 on amazon to throw that into the mix as well.
great video, did you have to make additional changes when connecting to dasan ONT? meaning any vlan changes or setting up PPPoE in your deco x20 router
Great review, I just purchased the Eero 6 only to find out it didn't support PPPOE and having to use CenturyLink's router kind of killed my desire to keep it. From what I'm reading this does support PPPOE?
Great video! I was going to purchase the x60, but I show Deco released a new x68 model. Just curious if you know much about the difference between the two other than the price?
Great video. Thank you. I have Alexa connected I to the 2.4 band. I manually had to separate the 5.0 and 2.4 bands from my router. Do you recommend that I merge them back and have the tc link manage how the devices connect to the bands?
I am waiting for delivery of my Mesh kit thanks to you. Can I ask - In UK the ISP supply a Router and not Modem. They also stop you from turning Router into a Modem only mode. Should I therefore turn off the SSID broadcast on the ISP router and then turn DHCP assignments through the MESH (if that's even possible) or do I just turn off ISP SSID broadcast and just connect the main Mesh node via CAT 5 and no config required?
so with all done and said I have a barn next door about175 ft away will this connect to the barn or can I take one in place in the barn and then will it allow the Barn computers to connect or if we just cad e56 cable to the barn wit it connect Thanks so much and we have learned from your video,s Ed Fugate
Watched with interest. One question though on something you didn't cover. When you went to the bedroom deco it showed it was receiving its signal from main deco in network room, you didn't show where the third deco was getting its signal from and I bet it was also the network room. So the conclusion is that this is not a proper mesh system as each deco would feed from each other in a daisy chain if it were.
Quick question: What kind of hassle, if any, can be anticipated when you buy a new cellphone or lose your old one. Is it as simple as downloading the app on a new phone, entering a password and all the configuration of the system is still in place and visible on the new phone? No additional reconfiguration required?
I really am loving this so far. What are the biggest problems you have at home with your Wifi network?
Ham
I started having issues with my internet provider router which also is used for wifi when I connected too many devices to it, it would just cut out the whole internet, then i got the deco m4 and all been good so far
Uploads are very expensive where I am, I get 1000 down but only 50 up. To get it up to 100 up I have to pay $50pm more for a 250/100 plan.
We just downgraded our cable package, and along with it lost our gigabit internet service. So the problem (at least for me...wife doesn't notice any difference lol) is the speed decrease & lag. Mind you, I'm not expecting gigabit speeds after getting this, but even 400mbit would be a big improvement.
Looks great, I have a TP-Link RE650 which is enough for the size of my Parisian flat but struggles a bit with French building standards: steel rebar reinforced concrete. The other problem being: in France they are already extremely equipped with 1Gbps and 10Gbps FTTH (80% of the country covered by 2024, for prices as low as 20€/month) with triple and quadruple play set-top boxes from the 4 main national providers containing NAS's and routers. Using a different router can degrade the provider's experience (especially NAS and security systems) and I still haven't been able to find an affordable WiFi solution that can match up with a 10Gbps fiber (the box integrated WiFi is not up to par with the connection).
I'm currently getting a steady 800+Mbps in bedroom and living room with the RE650 but a spotty connection, sometimes 300Mbps sometimes giving errors in the bathroom which is behind a corner and an F shaped set of reinforced concrete walls.
One other problem in very densely populated cities like Paris is interference, I had problems with my neighbors using a previous access point set that scrambled their connections. I messed up the connection of my neighbors on the 6 sides of my flat and had a lot of complaints but my connection wasn't spotty anymore in the bathroom. So I had to revert back to the RE650 and I'm waiting for a new affordable solution to use the full potential of my fiber line without starting a neighbor's war.
This is probably one of the best, most thought out thorough reviews of a mesh wireless network system I've seen on RUclips. Rock On! I've been debating on upgrading my Wifi system and with Amazon's Prime Day discount on this system your review gave me the information I needed. I work in IT and really appreciated your thought process in putting the video together and going through the advance features was spot on. Great review, keep up the good work!
Glad you enjoyed it! I try to cover everything I can, but I only know so much, lol.
I have 6 M5s and M9s around my house and I love them! There aren’t any dead spots anymore, and the WiFi is super fast and affordable! Highly recommend.
So it is possible to integrate different model hubs from TP-Link?
@@sooty_uk That’s what I’ve done. They should all be compatible with each other.
Haha, she sounds just like my wife. “I don’t know, it works. What more do you want?” Lol
Thanks for the video. Like most Mesh systems, this one functions best when you use the nodes in AP mode, assuming you have wired Ethernet available in the preferred locations. I appreciate you setting them up in a real-world scenario. I haven't tried this particular system but with every other one I did try, the nodes had trouble seeing each other on different floor of my home of a little over 5000 Sq ft. I suspect mesh is viable in certain environments but not so much for larger, multi-level homes.
Just an excellent tutorial on this WiFi mesh system! Great job covering all the important aspects of using and installing!
This video helped me device on getting these devices. Also appreciate @26:41 when you pop out from behind the plant and continue casually discussing the set up. I will steal the idea of hiding the device in the bamboo planter as it looks great.
just my two cents... I would limit the wifi signal to a zone within my house instead of extending it too far out. this is a very bad idea in terms of securing your network as it will be exposed. I would suggest reducing the power to limit the coverage outside the house or to move the node to reduce the signal too outside. just a suggestion. :)
And also to be a good neighbor.
The only things that are still need to do some work on, it's the ability to manually choose the satellite connections (this is done by software, can't select) meaning that you can have lower Wifi connection because the satellites are trying to connect to the main router instead to the closest satellite unit. The second thing, it's the ability of your item to select to what satellite to connect (same issue). I had to do a lot of arrangements and connect them with ethernet.
So thorough! Thanks! I use Eero myself and it’s been awesome, but this system was in the running. Seems awesome!
The 2 ports on the unit are not an "ethernet input and ethernet output port" they are just ethernet ports that function as input/output in this configuration because they detect that the one port is from a modem and the other port is connected to downstream devices. In your configuration that's a very nice large Tp switch (good choice, lol). All of the other Mesh nodes see only Non-modem direct connected devices. There is no input/output involved.
Honestly, that's the best review of a wifi mesh setup that I've seen. And I've been watching them non stop for weeks. I'm not sure if I'll get this setup, but great review 👍 Got a new subscriber
I'm glad it was helpful!
I went from the original 2*orbi to 3*deco m5, 932mbit down, 520 mbit up from the app ( speedtest on main deco ). Ethernet backhaul 340/300 on WiFi ( not WiFi 6 )
The website on the main deco will show cpu usage, so I used the ISP router to reduce CPU load on the mesh.
It went crazy when I knocked the power on the main off, after restart one client m5 went green/red badly, speed through the floor. full reboot to fix, my point being it's hard to diagnose issues, so full reboot if there are.
But the flexibility to mix different decos unlike orbi makes it a great alternative, along with no hardware differences main/client.
I like the TP-Link brand with their selection of smart home devices as well.
I just started using more of the smart switches and the work great.
This is the best video I saw so far on deco setup and home setup, very helpful.
What a great detailed explanation on how to setup your Deco X20 system. It helped me a lot. Many thanks!!!
Moving to Eagle Mountain from Pleasant Grove, UT into our new townhome soon so this is extremely helpful!!
That's great! Looks like PG is getting fiber soon. Hopefully you have something good out there.
I have the A3 I believe it's called and looks like the interface is the exact same. I really like the Deco Mesh system and I have zero dead spot I have two devices and my phone seamlessly connects to whichever deco it's near.
I have this mesh WiFi system and initially had some issues with my mesh points disconnecting but after the firmware update everything was great. I bought it for coverage since my home is three levels and 3600 sq ft. I actually bought two sets of two so I have four mesh points. I can cross the street and still get a great signal on my neighbors porch and my entire backyard where I work sometimes in the summer.
Thanks for the review and that great to hear it has been working well after the update.
Great review, yesterday I got the W2400 and must say I can see the difference.
Since u already set up wire within the house, it is better just hardwired all of access points, so u will get its full potential.
I’m surprised your backhaul Ethernet setup only yielded 300+ on the Pixelbook and 700+ on the MacBook. Shouldn’t it be full speed as it’s essentially wired back to source?
Great video by the way, very thorough.. appreciate the effort you’ve gone to demonstrating all configurations
There could be a lot of factors. My hub, or the internal Ethernet cards, maybe I should have done a reboot. They did have some pretty odd results.
I watched a lot of videos regarding TP-LINK in general and this video is by far the best and gives the most information of the features and setup possibilities. Great Job
Great job, Brett! Loving our 2 pack Deco X20.
You're right, great value for wifi 6 and very easy to use (10 minute setup).
Still have to explore the app more - thanks for the pointers.
I did notice basement signal is sometimes a tad unstable, but we haven't used ethernet backhaul, so that could help.
Also, our ISP plan 150 down / 15 up, so we often get 200-350 down / 15 up on WiFi.
The ethernet cable that comes with the box - not sure if it's the fastest - so could try other cat 5e/6 cables to be sure.
And for better coverage or more consistent gigabit speeds, they do have the Deco X60.
I considered reviewing that one but the X20 seems to do a pretty good job. I am about to go with Cat 6 everywhere so I am curious what speeds that will give me.
@@TechWithBrett yes, X20 does a great job and is likely the better buy for most people.
Oh, that'll be interesting with all Cat 6 cables.
This was the exact video I needed 👌🏽
I had very good experience with TP-Link Deco X60. Highly recommended to buy
the speed even with wired backhaul seemed a little disappointing to me. I thought it would be higher. thx for the review
Wow, that is really fast! Hope to see more smart home devices soon!
Super happy with my deco m4
Very nice job reviewing the x20.
Wow, such a great video from all maint points! Especially different connection methods was well covered!
I feel the need to start my own product called "The unhappiness-slow-internet killer"!
I love your channel, and I always look forward to your reviews, however as someone who works in I.T. and smart homes I feel that I need to say that just because WiFi 6 exists doesn’t mean everyone needs to rip out their perfectly fine mesh network and run out to buy a router that supports it. The vast majority of people aren’t gonna be saturating their gigabit or multi gigabit internet connection and in day to day use won’t know the difference outside of speed tests. The speed test differences you’ve noted could very well have been found with adding more points or better relocation of them.
Great point. As with any product, if it working right there is nothing to change. I think at this point many some of the 1st gen routers that were out might be going bad, and if you are going to upgrade then it is best to sort of future proof a bit with Wifi 6.
👍👍👍👍very good review of all the functions inside the Deco app.
。
I have TP Link X60/AX5400 wifi 6 with 3-mesh set system installed in my house recently. I am very satisfied with it ! 👍
I just upgrade my modem. I had an old one lying around and decided I should install that to see if it worked, and it did so now I don’t have to pay for the rental each month. Every time I feel like I’m done with upgrading stuff I watch one of your vids and i realize I’ve done nothing 🤣 now I wanna get this mesh system lol
Uh just a heads up u forgot to blur the IP at 8:11 🙈
Thank you!
Such a well produced video! Thank you mate.
about to upgrade my Google nest with a tp link axe5300 wifi6 E. What’s a good Ethernet cable for Ethernet connected devices?
I am confused why you are not getting 800-900 Mbps upload and download on the backhauled ethernet wifi units? Shouldn't you be getting your Gigabit speeds if you have a wired connection? Why would you not be getting full speeds to the other router units?
Good setup video and works fine,
BUT, you have several errors in the tutorial oration.
1st. near minute 2 & 3, the 2 ports are not an "ethernet input and ethernet output port" nor a "connection to the backhaul port" the 2 ports are just ethernet ports to add switches/devices to. Comprising your INTRAnet connectivety. The "backhaul" is an internal implementation of an "additional" channel of wifi connectivity so the MESH can be "duplex" in nature allowing simultaneous traffic to do "transmit and receive" traffic simultaneously in lieu of reading waiting on writing (so to speak)..
Lol Mrs TechwithBrett keeping it real " I don't notice anything different than the last internet we had" LOL...can SO identify with this, was like when i was blown away with my LG 55" OLED, dolby vision the lot.
I said to my wife, so much better than the HD tv we had before isn't it, " I cant really tell the difference" haha!
I am still rockin the orginal Google Wifi, it's a dam solid connection, and i am reluctant to upgrade.
Interesting point, about naming the Wifi network with same name and password, would that mean they would all stay auto connected if you use the same name and password, or would you have to re enter the password on every device?
Great vid as per mate, keep the content coming!
The devices will connect to any WiFi access point with the same SSID and password, so long as they support the band (2.4 GHz, 5GHz etc). For example, if you take your Chromecast with you somewhere, you can make a hotspot on your phone with the same SSID/Password as your home and it will connect.
Haha, that is the case with most things.
Yep! Everything automatically connected back to the new Wifi. I didn't have to reconnect any device.
The dongle used to connect the laptop must be USB 2.0. Hence, the slow speed. USB 2.0 has a theoretical limit of 480 Mbps.
Search " describe the "backhaul" concept in Mesh router networks".
You will find
"..Backhaul is a technical term used mostly in telecommunications. It is a synonym for "backbone". Therefore, when someone says WiFi backhaul when referring to a mesh WiFi system, it means that the backbone of the network is made of direct wireless connections between the nodes of the mesh system .."
What you are calling "backhaul is actually "direct connect" not the backhaul that is providing the return channel in your Mesh nodes.
So you pay for 1GBS, but only get 300mbs with WiFi? What would you get if you only pay for 400mbs?
I have ( Tp-Link x60 ) and im very happy , better range and connectivity then Netgear and Asus. not to mention it comes with a bunch of extra controls and device integration glad i switch to tp-link. im getting 855 mbps down and 39.8 up
Absolutely great video. You answered every question that I had! Thanks.
I use 3-set Deco M5 and 1 Deco E4R in a similar home topology as yours. The experience was great. Eventho it's one of the cheapest mesh system around, the performance was very good with 0% Bufferbloat with very little config to do (previous router i use reach around 5-10% bufferbloat). The AV is also apparently useful in blocking spam for my mom, and its now no longer limited to 3 years. I only hope that it allows a little bit more degree in configuration, for example to select custom WiFi channel.
How do you test Buffer bloat? Yeah the channel selection would be nice.
@@TechWithBrett there’s many script/tool to do network quality testing that I’ve used. For quick quality testing I just use the speed test provided by DSL Reports. It provides bufferbloat testing as well as outright speed and latency. Server selection is a little bit lacking in SEA region so I still use it combined with Ookla’s Speedtest for the download/upload speed.
Side tips: The Deco app also have built-in speed test tool that run from the gateway Deco itself. I think it also run on Ookla’s service too so great server selections. It was useful when diagnosing and pinpointing connection issue (it was mostly because my ISP modem/service, but one time the ethernet cable connecting the Deco and switch was broken)
Regarding channel selection, there’s some feature request ticket in their support website, however it perhaps lacking vote. Might be worthwhile to check it once in a while.
It was basic option that’s already possible to do in some of their competitions’s system. I know Ubiquiti’s mesh has one.
And also a newer password encryption system would be better.
Where did you buy your X20 system? Amazon sells it, but I want to compare prices. (Best Buy doesn't carry it.I) Also, what's the difference between the x20, x40, x60 models? And, how did you decide on the TP Link X20 instead of comparable ASUS routers?
Their is no x40, is x20, x60 and x90. The x20 is sold only on Amazon, the x60 is sold at Costco and the x90 is sold at Best Buy. The x20 and x60 is dual band and the difference is bray the x60 has better coverage and can potentially provide higher speeds. The x90 is a tri band mesh and it can handle more devices that are using the same band at the same time.
Excellent video by the way. Makes everything understandable.
I just bought one, and seeing your video i am glad i did! Thank you for taking the time and actually showing everything about this system!
Glad I could help!
With the back hall does it make the signal “equal” between all sections? I’m currently in the planning stage of turning our house into a smart home? Thanks for all your great videos. They have all helped so much
yes especially with Ethernet backhaul.
Thank you for such an informative video.
My internet connection is DSL and it is limited to 3 mbps (rural US) but I do use my local network a lot to stream from a local server. Thinking about getting this to bounce the signal out to my barn. I wonder if they have a compatible outdoor mesh point? Currently I use two access points placed on opposite sides of the house and it works well but it'd be nice to get some more outdoor wifi. Great review!
What can I say? Absolutely beautiful video very informative. Could you please explain what all this connections. For instance IOT- device and non-835 I got few of them and I can change your name but I don’t know what they are to change their name. And then it says high priority and if I click on it, he’s asking me for a total bandwidth before using high priority. I don’t understand what it means. Maybe you should make a video and something like this but overall I really like your video. Thank you.
got the ax3000 version. it's a really good mesh router
Looks great, I have a TP-Link RE650 which is enough for the size of my Parisian flat but struggles a bit with French building standards: steel rebar reinforced concrete. The other problem being: in France they are already extremely equipped with 1Gbps and 10Gbps FTTH (80% of the country covered by 2024, for prices as low as 20€/month) with triple and quadruple play set-top boxes from the 4 main national providers containing NAS's and routers. Using a different router can degrade the provider's experience (especially NAS and security systems) and I still haven't been able to find an affordable WiFi solution that can match up with a 10Gbps fiber (the box integrated WiFi is not up to par with the connection).
I'm currently getting a steady 800+Mbps in bedroom and living room with the RE650 but a spotty connection, sometimes 300Mbps sometimes giving errors in the bathroom which is behind a corner and an F shaped set of reinforced concrete walls.
One other problem in very densely populated cities like Paris is interference, I had problems with my neighbors using a previous access point set that scrambled their connections. I messed up the connection of my neighbors on the 6 sides of my flat and had a lot of complaints but my connection wasn't spotty anymore in the bathroom. So I had to revert back to the RE650 and I'm waiting for a new affordable solution to use the full potential of my fiber line without starting a neighbor's war.
Sorry for the double post (other one being as an answer to Brett's comment) but the reply comment won't delete for some reason beyond my understanding.
That is a very interesting issue. Hopefully you can find a solution.
Best review so far. Thank you so much 👏
How neat is your setup!
Thanks for the video... Can you make a video on your system settings?
II like the Deco Mesh System, but I’ll stay with Google WiFi for now.
I'm wondering if adding a point to my Nest Wifi would have helped.
@@TechWithBrett i have the 3 pack and it works amazing
@@htxsupercrewon22s which model do you have ? Thx
Which model did you end up getting?
@@arkbonjangles9984 I started with the Google WiFi years ago, and added 2 Google Nest Wifi to achieve stronger overlapping coverage.
The Google Nest is backwards compatible with the earlier Google WiFi.
First of all thanks for the video, Brett. I find your solution very interesting. I just wonder about your router/modem. Is it firewalled? If it is could it interference with the Deco’s firewall?
Wow, Great review man.
Do you recommend setting up the Deco as router mode or access mode?
Great job Brett!
I have three people lived here using WiFi Charter the router is another room I'm in the bedroom I'm for sure going to have to buy that
I have the x 20 also I love it should have got the x60
I considered trying that to compare.
Good Video, i have this mesh system and i love it.
This would be great for my camera in side my birdhouse
I'm surprised at how slow these speeds are. I have Zyxel Multy X mesh at my house - which is WiFi 5. I get around 600 down and 400 up consistently. Sure they're a little more expensive.. but still.
excellent video. Made the set up easy. Thanks
Can you connect the ones you place arounx the house via Ethernet
Such a good review! Thank you!
Great review, very helpful.
Excellent video. I have a Google Wi-Fi mesh system with three access points. It automatically selects 5 GHz or 2.4 GHz, depending on the device.
I pay for 500 Mbps download speed from my ISP. I do get 400+ Mbps near the main router, which is next to the modem. The other two access points are connected wirelessly. I only get 90 Mbps download speed at the third access point, which is on the opposite side of the house of the router.
Is it normal to have speeds reduced that significant at the third node? My house is not wired for ethernet. I prefer not to wire the nodes to each other. Trying to figure out if I need to purchase a better quality mesh system or if diminished speeds at each node is typical for the majority of mesh systems?
Thanks for the great video!
One questions:
If I connect every point with a cable using a switch (the same way you did), why does it cancel the mesh? What’s the point of buying a mesh system if it doesn’t act as a mesh?
It cancels the mesh and becomes wheel and spoke which is better in this case because it provides faster, more reliable inter node communication. It's still well worth buying because it creates a single network that allows you to roam between nodes, the same as it would with a mesh topology.
It does still act in the same way as a mesh network only the nodes are communicating with each other via ethernet cables rather than Wifi. I set one of these up in that way just over a week ago and it made a massive difference to my Wifi speed and reliability
Hi Bro, I was hoping you'd ask your wife again if she noticed a difference with the TP-Link system. That's the REAL test!
Simply amazing, great in depth video!! What switch do you have connected or what model would you recommend ? Again, amazing work,
TP-link network switch
not sure how many ports tho
I have used an 8 port and 16 port TP-Link and they work great. ruclips.net/video/wQQt9Qv6xDY/видео.html
Thanks for the video, are you still using Deco or Nest Wifi? which one u felt more reliable
Excellent video!!!
At the moment I am using the router that came with my ISP. Each desktop computer on my Ethernet LAN has an assigned IP address that I set up in the router. Can I do the same thing with this mesh system?
Such a great informative video. Thank you.
Nice and great review as always.👍
Question I'm looking at the Orbi satellite, mesh wifi dual band 5g 90.00 Vs.
the Google Mesh AC1200 Whole-Home WiFi System 3-Pack 125.00 which overall do
you think would work better in a old double wide mobile home with 3
bedrooms looking for your reply, thanks for the great video as
well,Kraig Also I can get the TP-link Deco S-4 3-pack for 114.00 on amazon to throw that into the mix as well.
great video, did you have to make additional changes when connecting to dasan ONT? meaning any vlan changes or setting up PPPoE in your deco x20 router
Is access point option better or router option for better coverage or signal.
Great review, I just purchased the Eero 6 only to find out it didn't support PPPOE and having to use CenturyLink's router kind of killed my desire to keep it. From what I'm reading this does support PPPOE?
Great video! I was going to purchase the x60, but I show Deco released a new x68 model. Just curious if you know much about the difference between the two other than the price?
Oh man! I was hoping you'd ask your wife again if she noticed a difference with the TP-Link system. That's the REAL test!
Great video. Thank you. I have Alexa connected I to the 2.4 band. I manually had to separate the 5.0 and 2.4 bands from my router. Do you recommend that I merge them back and have the tc link manage how the devices connect to the bands?
Hey can you try the globe suite lights and outlets pls to see if there are good to buy
I would just go off of reviews available now.
I am waiting for delivery of my Mesh kit thanks to you. Can I ask - In UK the ISP supply a Router and not Modem. They also stop you from turning Router into a Modem only mode. Should I therefore turn off the SSID broadcast on the ISP router and then turn DHCP assignments through the MESH (if that's even possible) or do I just turn off ISP SSID broadcast and just connect the main Mesh node via CAT 5 and no config required?
Oh, can I change the Wireless channel it is using so that it does not conflict with my neighbors' Wi-Fi?
I don't notice anything with faster networks afaik, we have reached peak connectivity. VR will require more though.
Thanks for the review. Does it have a white list option?
Preteen option is available on parent control which needs subscription fee right. Or was it part of deco package.
Can you change the channel from 20Mhz to 40MHz or 80MHz on the backhaul link running between the units so the mesh can run faster?
What a nice review!
But. If your just wiring them together then what’s the point of the mesh network Wi-Fi system?
so with all done and said I have a barn next door about175 ft away will this connect to the barn or can I take one in place in the barn and then will it allow the Barn computers to connect or if we just cad e56 cable to the barn wit it connect Thanks so much and we have learned from your video,s Ed Fugate
I own X60's and they are great
Can signal be extended via nodes or they both only connects to main router?
Watched with interest. One question though on something you didn't cover. When you went to the bedroom deco it showed it was receiving its signal from main deco in network room, you didn't show where the third deco was getting its signal from and I bet it was also the network room. So the conclusion is that this is not a proper mesh system as each deco would feed from each other in a daisy chain if it were.
The main router is in the middle basement. The two points are on the top left on the left and right ends so it would mesh with the main point.
Quick question: What kind of hassle, if any, can be anticipated when you buy a new cellphone or lose your old one. Is it as simple as downloading the app on a new phone, entering a password and all the configuration of the system is still in place and visible on the new phone? No additional reconfiguration required?