How To Remove Cadillac CTS Battery 🔋 DETAILED With Programming
HTML-код
- Опубликовано: 3 окт 2024
- Remove 🔧 & replace a Cadillac CTS car battery 🔋 with ALL tools used in this detailed guide. Please Like 👍👍👍 And Subscribe 🔔. For tools and supplies, battery part info, and other helpful videos to watch and learn: Click on SHOW MORE 👉👉👉👉👉.
Only tools needed are a:
👉 Ratchet Wrench 1/4" amzn.to/3eme6rd
👉 1/4" Extension set amzn.to/3kMaLEl
👉 1/4" Socket set deep amzn.to/385jKgc
👉 Wrench set 🔧 amzn.to/3dUvQ0C
👉 Dielectric Grease amzn.to/3LHQI71
Replacement battery: Battery type 48 A/S/AGM H6
👉 AC Delco Battery Gold 48AGM amzn.to/3A3QJhJ
👉 Odyssey Battery AGM 48 H6 amzn.to/41xEJkj
👉 Bosch S6585B Battery amzn.to/3KLEziH
This video shows how to test a car battery that is in the vehicle:
• How To Test A 12 Volt ...
This video shows how to test a brand new car battery:
• How To Test A New Car ...
This video shows how to read the date (how old) the battery is:
• How Old Is My 🚗 Car Ba...
VERY IMPORTANT: This video shows how to place the Vent Tube for the car battery in the right spot:
👉👉👉 • Cadillac CTS Battery 🔋...
This video goes into further explanation on why ACDelco codes the battery a few months more than what shows on its sticker label.
👉 • Your🚘 Car Battery 🔋 Da...
If you want to help support this channel feel free and send me a cup of coffee ☕ here:
➡️ www.buymeacoff...
OR
➡️ ko-fi.com/fixc...
OR
➡️ Click the SUPER THANKS button above.
Thanks and remember to always help others out and to make a difference in other peoples lives! #FixCarYourself 🔧
👍👍👍 & 🔔
My 78yo mother asked me to replace her 2012 CTS AWD Coupe’s battery today and was impressed when I said “I don’t know how to do it, but I know who does” and searched for it in RUclips, where you were the first hit. She made me promise to “thank that nice man on RUclips” ;-) Nice work.
Tell her I said you a very welcome!!!, but also great job to you because you changed the battery yourself. No matter the age, you can always learn I do many many things yourself! Great job!
@@FixCarYourself I tried without looking it up, and once I finally found the battery, that positive battery terminal connector stumped me - amazing how service-unfriendly cars have become. Even just changing a headlight bulb on this car requires a surprising amount of work
Agreed, you have no idea how many problems I have to figure out on a daily basis. It will only get harder as cars get tighter from a component point of view. But even worse, software locked components will eventually make things harder and pricer to for the average do it yourselfer to do.
Old video handing out new help still. Thank you!
Glad it still helps in todays age!
Very good video with great clarity. Your instructions were given and a good pace and did not seem to be rushed. I noticed that when you moved and "locked" the clamping lever on the positive terminal, you did not push it down to the bottom of the slot and to the left into the short horizontal segment of the slot. That horizontal portion is what actually provides the locking of the clamp in place. It will prevent the lever from moving. If left in the vertical portion, it's possible that the clamp can work loose over time. My 2011 CTS Coupe has the same basic setup for the battery. I inadvertently neglected to push the lever into the horizontal locking slot and sure enough, my wife was out with the car and the engine would not turn over as the cable, although in place on the terminal post, was no longer tight to the post. Lesson learned.
thanks, and great insight of your personal experience!
Thanks for showing all the way through the programming sequence. 👍
Glad it helped, and that you enjoyed the details!
Super helpful, only person who could help me with this today.
Thanks...Glad to hear it!
Excellent video on CTS battery swap
Thanks 👍
Excellent. 10 out of 10. The way vids should be made.
Thanks I try to keep it straight to the point, without giving people a story.
I would put down some cloth or cardboard to prevent the battery acid/corrosion from contaminating trunk.
That's the beauty about these batteries being in the trunk and protected from the outside elements as opposed to the batteries in the hood area, which don't get as corroded. However, some backing soda and vinegar or a cleaning solution wouldn't hurt. And its always good to vacuum up afterwards.
Thanks for the info, very good and thorough info.
Glad it was helpful!
Thanks bro ! Helpful video !!
Glad it helped
Very nice explaining process 💪
Thanks, I was trying to be as descriptive as possible. Glad you liked it!
thank you. very informative video.
Glad it was helpful!
“It needs a professional tech to do this, we can’t do this”
Goes to RUclips university, “ I could do this shit myself”
Damn Right!!!
Excellent video; thanks! I've heard that on some cars the car's computer needs to be adjusted to show it has a new battery versus an old battery or it will not charge the new battery correctly. Do you know if that is true on a 2014 caddy cts?
I haven't heard that and in this case seems unlikely to me. However, Cadillac's software system is not the best (which they do on purpose so you take it to a stealership to pay for programming). Anyway, I've had problems with the oxygen sensor before as well as with the windows not working to name a few, if the battery was not disconnected or a memory reset was not performed. So again I wouldn't be surprised.
Awesome video help great
Glad it helped
do you have to reprogram the key fob??
I don't think it was necessary for this specific vehicle. But it doesn't hurt. Check out the end of the video as I show how to do that.
Thank you!!!!
You're welcome!
would this process be the same for a 2013 cts-v2 wagon do you know?
It would be similar, if not the same.
Hey I have a red wire mounted to the floor board of trunk, trying to figure out what does it connect to please help.. I have a 2008 Cadillac CTS
I'm not sure off hand. If you do a search on wiring diagram , you'll be able to trace it.
What happens when the instrument panel flashes. How do you fix that?
Please be more specific. That might be normal. Also check if you have any codes.
i changed my battery and now i cant get my speakers to workl!!! no blown fuses! wtf!!
Do any codes need to be reset?