Это видео недоступно.
Сожалеем об этом.
2017 Honda Ridgeline - Backup Camera Stopped Working (Wiring Destroyed)
HTML-код
- Опубликовано: 6 авг 2024
- *As of November 29th 2022* Honda has issued a recall for this problem. Check with your local dealership on a recall repair.
Fixing a common problem on the 2017-2018 Honda Ridgeline where the backup camera stops working. The discovered cause is a faulty wiring harness that got destroyed.
The U.S. Department of Transportation’s Office of Defects Investigation (ODI) announced this week that it is opening a preliminary evaluation into a large number of complaints it has received about the rear-view camera in the Honda Ridgeline.
looking at the design and the stress on the wiring, this looks like a design flaw. Mine went last week and as soon as I saw your video, bingo. Thanks for the info but we should demand Honda recall the unit for this. It will happen 100%.
It took me about an hour to fix it! Thanks man
Great!
They’re is a recall on this now. The dealership should fix it for free.
It's more than braking point when you open tailgait downward. But when I looked more closely it pinches and smashes the entire harnes even more when you open it from left to right. The harnes get trapped between the tailgate and the hinge. And every time I open and close it the wires being squished. No wander wires fail the stress. It's definitely flaw in design. Make sure during the repair to reinforce the harness at pinching/backing point.
I'm getting a new harness tomorrow. I'm pretty confused how to access the truck-side connector.
It broke on my 2017 RTL-E. I had bought the extended warranty for 10 year bumper to bumper, Honda dealer would not fix it under warranty, they said it broke do to normal wear. Bullshit, my tailgate is hardly ever use. Not impressed Honda!
Mine just stopped working last week. Guess I'll have to break out the soldering iron and shrink tubing. 2017 RTL-E
Just FYI, the black loom tubing looked fine. I had to cut mine open to see that every single wire had broke insulation (some in two places) and a blue wire was completely severed in half.
Good luck
Ty, my 2017 RTL backup camera display just stopped working today. Found your video right away and my wiring break looks exactly like yours. As a former electronics tech, I'm certain I can fix as you did, but did you happen to post when you replaced the harness? I just had my left-rear door small harness replaced (free even out of warranty as it was a reoccurring problem), because the door simply would NOT open. Also had the fuel injectors replaced, under extended warranty.
So, did you replace your harness or have Honda do it or skip it altogether?
After consulting my local dealership it was suggested that I wait on a factory harness replacement. The amount of cars affected by this condition and the fact it affects a safety component of the vehicle (camera), there is a higher than normal probability of a recall.
Why would you replace it with the same faulty harness that failed the first time? That makes no sense. If I were going in there to repair it, I would solder wires, heat shrink, then armor the wiring so that I would know that I fixed the problem that Honda of America was negligent in making.
Reached that conclusion too. That's why you don't see a follow-up video. But! there is a Part 2 coming out soon.
Thanks! I have the same issue. Do you have a video showing how to take a part the tailgate to get to the wires easier?
Search my videos for Part 2.
Awesome 👏🏼
Thanks for the visit
What do you recommend for a backup camera blue screen? It replaced the camera twice. 2015 Hyundai genesis g80 sedan
Hi, I'm not familiar with Hyundai issues or their backup camera. I'd start by looking into some enthusiast forums and seeing what others have done
Camera just died today too. Thanks for the video. My wires are clearly frayed and cracked. Did you have to take the plastic interior cover off of the tailgate to make the repair? If so, was it as straightforward as it appears to be? I think I'd prefer to fix this rather than hope for a recall.
You don't need to take the interior panel off to perform a repair but it definitely does help. As I recall the top of the tailgate was hard to take off to get the panel off but the panel itself was straight forward
@@acura2g Thanks so much. I'll be giving it a try next week.
Dang. My camera just quit for this same reason. Hoping for a Honda recall, because I'm probably not up to fixing this myself.
I think there is a higher than normal likelihood of a recall for this
Sadly I’ve taken the truck in for the second time for this very same problem. Under warranty? Sure. But I’d prefer not to have to contend with it again.
Just got a recall on this issue for 2017-2019 models
Just got mine too. I think I'll stick with our repair.
I dont trust my soldering. If I want to replace the harness itself, what would that part be?
I believe it's 32109-T6Z-A00 but double check with your local Honda Dealership for the correct revision as they have been revised a number of time. They'll have a couple on the shelf, no doubt ;)
@@acura2g oddly service manager at dealer claimed that he'd never seen this before and quoted me $587 labor alone for "backup camera repair". Lead tech also was not familiar, but parts folks had no problem finding what i needed. Wasn't in stock but was delivered next day. I actually "soldered" myself while waiting for the harness to come in- heat shrink solder made it easy - but everything feels "crispy" and I expect I'll need to replace the wiring entirely at some point so paid for the part.
part I got is 32109-T6Z-AO1
@@AndyWerden that is odd. When I filmed this video and part two, I called my dealer to see what their thoughts were and my parts department had 4 harnesses in stock and were very aware of the problem.
Thanks for sharing
Can't figure out how to get the tailgate cover off
The backer panel is held on with torque fasteners and the top part of the gate is held on with clips that you pull off. Once you get the top covers off there is another plastic part that you slide left and right to remove.
@@acura2g thank you. Where did you get the wiring harness? Honda?
@@leemcclinton1016 in this video we soldered connections back together. In a follow up video coming out soon I describe how it is not worth buying a new harness because Honda hasn't revised the harness. Extending the wiring and soldering the connection is the best solution to date
@@acura2g can you do me a favor and show me how you tear apart the tailgate when you make that new video?
I can't find where the wire terminates. It appears to run into the bumper. I've looked underneath and I can't find it.