How to Install a Bafang Mid Drive motor on your bike
HTML-код
- Опубликовано: 23 авг 2024
- Today we break down the installation process of Bafang Mid-drive motors and show you how to convert your regular pushbike into a fully functioning E-bike. We outline common installation problems and errors and how to rectify them.
Watch our video explaining how to shift gears on ANY mid-drive motor:
• How to shift gears on ...
Instagram: ...
Facebook: / cyberbikes
Contact us here
info@cyberbikes.com
#bafang #middrive #ebike #cyberbikes #doingitright 
Хобби
Woooooww I’m a professional ebike technician and this video covers EVERYTHING every little detail!!
Felipe… you’re the man!! Definitely subscribing =]
Thanks Bruno for your words and for being part of this channel. You’re actually Felipe’s idol and we feel so grateful to have you commenting here! Thanks again and please stay tuned for more. So much Poweeer!!
Poweeeerrrr! 💥🤟
Thank you both, great content and well explained videos. Don't forget to make them fun :)
1.5k subscribers? That's criminally low for the quality content you put out.
Thanks, we want to grow more and more. What video topics do you suggest we cover?
Much better than the "standard" videos that just go through the basic steps. This gives a good heads up of some of the problems and how to avoid them.
Thanks for your comment, please support our channel by giving us a 5 star review ruclips.net/video/UCpJSlHBJAc/видео.html!
Best regards
One of the most easy to comprehend, sensible and very informative about how to take care of the installation for the kit of a bafang motor.
You have a great personality and great knowledge. Thanks for actually talking through the rationale behind parts of the install instead of showing us with random background music like most other videos.
Thank you
I've watched dozens of Bafang install videos and this one is right up there. Thanks for the tips.
Thanks D Evans
Wasn't the most comprehensive video I've seen on the subject BUT it was very short and what it did provide was all the extra tips that I've not seen in any other video so far on the subject. Very helpful, short, and ensures the avoidance of some very bad errors. Thank you for posting this.
Thank you Cindilas hope to see you again in the next videos
So glad that I found your channel, by far the best E bike channel on You Tube. In this video you say tighten the bottom bracket to 80Nm, but in your other video on the installation of the Bafang motor, you say tighten it to 60Nm. Which is the correct torque Thanks for all the time and work you put in to helping others
Hi Richard, that's true. We've said in previous videos to tighten the nut to 60Nm because that's Bafang's recommendation. However, at the shop, we have been doing 80Nm, and after much discussion with our mechanics, we decided to publicly say 80Nm is the correct torque, even though it's not endorsed by Bafang. So, in old videos, you will hear me saying 60Nm; in newer videos, you will hear me saying it's 80Nm, swimming against the tide and haters. Still, it is what it is; in real-world exposure, tightening the motor with 60Nm won't hold it in place, and 80Nm does the job without compromising the motor's integrity. Thank you for your kind words and appreciation; I wish you all the best with your installation.
@@frcr90 Thank you Fellipe for clearing up the confusion. All the best
I am about to install a bafang midirve motor on my bike this has been one the best informative videos I have watched on installation advise - Thank you
Awesome, thank you!
Hi Brian , I suggest that you measure your existing bike front chainring to the end of the bottom bracket before removing it and installing the motor. With that measurement you'll be able to get a close to perfect chain line by adding different size bottom bracket spacers or a different chainring then the stock one. Chain line is very important to save you on wear and tear on your bike components.
He doesn’t just explain how to do it but, why he does it! Awesome! Thanks bro!
Surprised this channel isnt huge. Glad to be here early.
Thank you Taylor for your kind words. We are working hard to push the best ebike content on RUclips and people like you are the motivation to continue. Please if you have any suggestions let us know, we will mention your name in the video to give you credits for the ideas. Best regards, Felipe from Cyberbikes
I could instantly see that you are at the highest level of mechanical skills over all of the other bafang installation videos that I have previously watched! Leading me to subscribe and smash the like for this quality content.
Thank you Scotty welcome to Cyberbikes
Completely agree.
no one shares the cable path technique. this is the only video I've seen showing that. thank you
yes that's true we also noticed that and recorded that video to solve that issue
Hi, Felipe. My name is Caes. I was born in the Netherlands in 1956 and grew up on a bike, starting on a little tricycle at the age of 4. In1987 I moved to Australia and now live on the island state of Tasmania which is a beautiful mountainous state. As I am getting a little bit older I decided to go electrical and just ordered a Bafang BBS01 kit for my Bombtrack adventure+, bike packing bike. Your Professional, trust worthy advice, is worth its weight in gold to me and I want to thank you very much for that. Keep up the good work mate. Greetings from “Down Under”👋🏻🦘
Thank you Jan, wish you great rides around Tassie! All the best amigo!
These are some excellent tips that a lot of other videos I watched failed to mention! Great job!
Glad it was helpful! Please give us a 5 star review ruclips.net/video/UCpJSlHBJAc/видео.html it helps us a lot!
Hi Fellipe , I'm sure that every time you install a mid drive there will be some type of issue that can be solved with experience like yours has all bikes are so unique. I just want to" Thank you very much " for all your advice and recommendations towards my successful installation it's truly appreciated. I'll send you a picture soon. Kind Regards from Canada !
Thanks Awesome, yes you're right, every installation is unique, and don't forget to share your build with us (info@cyberbikes.com)
WoW 😮 this is the Best quick-get-to-the Point video ever!!! And the cinematography is excellent to see where things are. You got it Felipe!
This is the best informative video I found! Thank you so much for your help! I'm definitely subscribing!
Thank you Sam Cheng, we gonna produce many mode videos like this, hope you like them all! Cheers from Cyberbikes
This is the best video on how to install a Bafang mid drive. Very clear and to the point. Thank you! :)
wow its one of the first video where the common problems are told and shown how to solve.Ive only seen one other video where they talk about chainring spacing,gearing and chain
Thanks for your comment Syed, please have a look at our other videos sure you wont find better info ebike related! All the best mate!
This is an excellent guide with important tips to ensure longevity and reliability of the system. These tips are learned from his extensive experience in installing, using and maintaining these mid motor Bafang systems. He knows what he is talking about. Take advantage of this wisdom.
Thank you for your clear instructions!
Thanks Dominic, we see you in the next videos!
Very good instructions! 👍
Thanks, Bengt, happy to have you here! Cheers
Very good video young man..!! You seem to be most knowledgeable concerning these mid drive motors > 🙂
Yes thanks James
@@Cyberbikesau
Excellent Video!! Thank You So Much!!
very informative video, thanks! just what I was looking for to understand how difficult it was to install a mid drive motor (quite easy, I see!)
Hi Dominic, it's easy if you have the right tools, and some mechanical knowledge and have our Cyberbikes videos to guide you through!
Great video, lots of useful tips and sensible advice. Best video I have seen on this subject so far.
Thank you please share them with your family and friends!
Great video and excellent tips
Thanks Tim, we see you in the next videos!
Excellent video!! You mentioned some great things for folks to look for when doing a conversion. Thanks
Glad you enjoyed it! We subscribed to your channel, keep up the good work mate!
Felipe- From another Rodriguez, gracias for this excellent video!
Hey Richard thank you (obrigado), where are you from my cousin? hehehe
E very easy to do I did my new 29” but it came with a PF30 which you will need a PF30 to BSA aluminum 73mm adapter pressed into your bottom bracket.
Thanks buddy. You gave some valuable insight. Appteciate it.
This dudes good, id pay for him to install me kit
Absolutely, my friend, you're welcome at Cyberbikes. Cheers!!
Parabéns FÊ, vc tem uma forma simples e objetiva de passar o seu conhecimento! I´m proud of you....... many kisses!!!
Thank you Katia big kiss 💋
Hi felipe. I noticed you still have the chainring guide on. But you the controls are no longer on the handle. Is it disconnected? If yes where and did you disconnected from thanks for the great videos brother 🙏
Hi Noah, the front derailleur now works as a chain guide, and we want it there to prevent the chain from dropping to the inside the frame when engaging first gear.
The gear shifter on the left-hand side was removed to give space to the throttle and LCD remote control. That's a standard here at Cyberbikes and I suggest you follow it too.
@@Cyberbikesau thank you 😊
@@ynnz Thanks Akhtar!
So i went to disconnect the cable. The derailleur is under tension. Now its rubbing against the chain really badly. Please advice on how fix this thank you 😊
@@noahpopal9922 hahha so thanks for letting me know, we will have to record a video explaining how to do it because it's quite complex, basically you will have to use the stopping screws to lock the derailleur where best suits your chainline. Does that make sense? I suggest watching a video about tunning front derailleur to understand how they work.
one suggestion, it'd be better to have brighter room lighting for this kind of videos.
Thanks for that, we will do it next videos!
great tips. thank you.
Thanks for your comment Patrick, we are recording a new series of videos, including most common problems with Bafang motors, how to pick the right bike for conversion, how to correctly estimate range on your ebike, and how the police don’t help you to recover your bike and the GPS tracking for ebikes we developed and has been a huge success! Stay tuned for more
yo quiero hacer mi bicicleta eléctrica me podría ayudar vivo en los ángeles California
Si amigo nosotros podemos the ayudar. Escriba un email para info@cyberbikes.com com tu nombre y comentario. Gracias parce
Thank you for a great video
Our pleasure!
Nice video👍🏻👍🏻👍🏻 thanks!
Thank you Andres, if you need anything please come to our cyberbikes shop!
Super video , thank you
Thank you too
that was helpful thanks for sharing
I love this video!
thanks we love you
very good video.
Glad you liked it!
Does the BBSHD motor have separate wires for speed & shift sensors or do you have to buy a splitter to hook both up ???
The speed sensor is one cable, the gear shifter is another cable, they have different connectors. What you have to check with your supplier is if the controller has a shift sensor connector, the speed sensor is by default coming with all motors
Great info here!
wonderful, thanks
Thank you too!
GREAT PRESENTATION ! ! !
Thanks for watching
Hey Broo Happy Fathers Day #389 Subscriber🤣👍
LOL Thanks!
Very well said bro!
Appreciate it!
This was very professionell explained wow 😲
Thank you so much for these valuable insights!
No worries thanks for your comment Missak
@@frcr90 i am confused between 500w and 750w, i live in a mountainy area, you think 500w is enough, i dnt offroad. if 750w, what battery rate do you recommend? thank you
Nice job love the detail , who makes the Bafang tool ?
Hi James thanks for the comment. Our tool was bought from ebikes.ca
Opa sorry, those tools were bought from our Bafang dealer in China but ebikes.ca are awesome too for hub motors and controllers! Free advertisement for our friends in Canada 🇨🇦
Do keep the front derailleur but with the shifting cable?
You can remove the shifting cable and the shifter, and lock de front derailleur it will be fine
Abrigado
Obrigado!
Hi Fellipe , Question on the install , the chainring is it the stock Bafang chainring or one with more offset due to putting space on bottom bracket ? Thank you for taking the time to advise me it' truly appreciated.
Marc, it's not rocket science. If you added spacers on the motor, depending on how many spacers you will need a chainring that's more concave to compensate for spacing the motor away from the bottom bracket. Usually, for up to 2-4mm spacers, you can maintain the original chainring, but everything depends on your installation. Every installation is unique. Please to share our videos with your mates and spread the message. We help each other. Cheers.
@@frcr90 Hi Fellipe , I understand , spacer = more offset. I got the stock chainring and put a 1mm spacer at the bottom bracket chain line looks straight but unfortunately I can't shift it on first gear or my 9th gear. I'm going to need to order more offset. Can you suggest a chainring. I'm thinking the 46 t Lekkie Bling ring could solve it but would like your advice before I spend big bucks. Hoping to hear from you , Thank you Sir.
@@marccardinal3137 why can’t you shift to 1st and 9th?
@@frcr90 Hi Fellipe , Sorry for the late reply. I made a mistake I can shift on 1st gear but when I shift on 9th gear which is my last gear the chain jumps to my 8th gear on my rear cog when I start going really fast. Do you think a different chain ring like Lekkie46 t HD could help ? I followed many of your advice , which really helped a lot.
I have a surly pugsley is there anything I should know before installing my bbs02 what shims should I use?.
My rear brake is under the frame & the motor… how am to avoid this?
thanks for the video , can you maybe give advices how to organise cables near the steering wheel not to look like a spaghetti
Great suggestion! use small zip ties and instead of squeezing them together try to mimic a loop around the brake cable
I want to install a Bafang motor on my cruiser bike. Do you recommend Bafang? Are there other motors around that's equal or better than Bafang. I'm going to watch your videos when I install this motor. I just want a simple set up with a one speed cruiser bike.
Can I add this to my rear wheel geared hub ebike?
we dont recommend
Where do you get that bottom bracket socket?
look for the brand UNIOR, and you will find that tool
Hi Fellipe , I started my install yesterday BBSHD , when I start tightening the nut to 60 nm the shoulder of the motor moves against the chain stay. Looks like I might need spacers , I'm I correct ? Can you recommend where to get the spacers that you use. Please advise , Kind Regards !
Hi Marc, we buy spacers from our Bafang dealer in China, however you can get spacers on eBay/AliExpress, or spacers used on cassette gears or you can manufacture your own spacers if you have a metal pipe with the same diameter at the bottom bracket.
@@Cyberbikesau Problem solved Sir , I noticed that the shaft that goes in the bottom bracket was wobbling so I taped the shaft to stop the wobble then I tighten the nut and I also put hose clamp around the motor to my frame. Solid like a Rock Fellipe and there is a very small gap at the shoulder of the motor and chain stay. Thank you Fellipe ! I have one more thing to discuss with you and get advice. Please see my new comment.
@@marccardinal3137 Happy to know that! What other comment? There are too many comments every day. If you can please copy and paste it here. Cheers!! Happy riding!!
Can I suggest sir? Why if we put a METAL BRACKET or it's equivalent on a diagonal frame attach to the motor so it won't fall down in case the support provided by the Bafang kit.
You can do that Rodolfo, there are companies that manufacture that sort of attachment, search for bafang torque arm/bar and you might find it
@@Cyberbikesau thanks Sir.
Excellent! Clear and concise! What more is there to say? I down loaded your videos for future reference. Mahalo!
Thanks, James, it's a pleasure for us to have you Onboard! Stay tuned for more
what's the backround music on this?
have no idea editing company chose it
Hi!
I Have A Q
It's Normal For The
Motor To Have Some
Resistant When You
Pedal.
Not Using It???
Thank's
Yes, it is normal, there are many reduction gears inside the motor, bearings, and clutches, and all of them will generate resistance against your pedalling. What motor do you have? What's an issue you're facing? Is your question related to thinking of converting a bike and wanting to know if you could ride it like a normal bike?
@@Cyberbikesau Thank's For Helping Me🙏
It's A Bafang mid 750w
Puting It In A Mongoose
Ardor 27.5. 2.6 Wide tires. Just Watching Some
Vids On How To And Yours Is The Best💪
Thank's Broo🙏
May God Bless..
@@danielandujar5479 thanks Daniel, looking forward to read your comments again in our other videos! We will publish some more juicy tips about Bafang motors, stay tuned!
solta o inglês com mais confiança pae... ta ótimo mas falta confiança 😌🤌 e a bike ficou perfeita
proximo video mando com um ingles confiante pae abracos
You just persuaded me not to buy one.
you can invest on a professional service or buy one of our production model ebikes
hogy mukodik ha a motor runing ? van szabadon futo bent ??/
cant understand what you mean
This guy makes it sound so sexy.
Why didn't you remove the front derailleur?
it works as a chain guide. Watch this video: ruclips.net/video/UCpJSlHBJAc/видео.html