Just picked up a 2021 R-1 after an excruciatingly painful divorce. Thank you so much for the work that you're doing. It's invaluable to someone in my situation. Love the channel, dude. Keep up the good work!!!
@tacc529 not so much, I'd say more of an attempt to battle depression, and trying to be able to feel some semblance of happiness or contentment. I've owned 2 R-1's in the past, a '98 and a 2006, but sold my last one when my sons were born.
I started screaming when I saw you put the stock chrome screws back in the windscreen please go to the hardware store and purchase some black oxide replacements
I have a 2018 R1 in black. I will be interested to see how you like the new wind screen since I was thinking about getting the same one. Only think I don't like about the new gas cap is that now it isn't tethered and I think it would get kind of annoying set it down somewhere instead of just flipping it up out of the way like the stock one.
Look into rhinomoto for bar end that create a slot for the arrow mirrors. It’s what I use for my R6. Might be the same. Also I believe they have block off plates for the rear pegs. Or at least hooks that cover the holes.
Wait this is motonosity? I’ve been watching his tutorial videos and these thinking they were 2 different channels😂 great channel man, it’s good for everything
I know this is old, but you are supposed to remove the entire front fairing to remove the windscreen. Take off the two closeout panels on either side of the gauge cluster (2 bolts, 2 quick rivets), remove 4 nuts for the mirrors, remove the two bolts holding on the front fairing, and slide the whole piece forward.
Project Name: STEALTH RAVEN Also, if you can, for the nuts-bolts that are visible (i.e. on the fairing, front - side - back) if you can get black colored ones that would be mind-blowing.
Hey man love the content! I just bought my first bike and it’s a s1000rr! I know probably not the best starter bike but oh well. Hopefully we can go for a ride someday
Check out Rhinomoto, they have bar ends that screw directly into factory bar weights. Not sure if they have them for the R1 but it's worth a look. I have them on my mt-07 and it works like a charm. They look really good as well.
Bro, just get those cheap garden snake lights. Two sets of those and my garage is Brighter than the sun. I was able to do the engine swap on my ducati without really needing to use flashlights all that often. At work I've got a light in my mouth 24/7
I swapped out my lights with some 3 panel led things that are super bright. Not as bright as the tubes that I had in my old garage though. But I’m going to be doing a better light setup in this one. Ceiling lights can’t do what a video light can though. The video light isn’t for filling my garage like the sun haha. It’s for targeted lighting and talking head portions of stationary videos. I just wanted to show it 😉
@@h2oFun oh well looking at them I'm 99.9999999999% sure it's the dark. If you look in the video and look at the smoked on the website there's a huge difference. The dark seems to be equally translucent on the site and in the video
@@mrb6206 I ended up going with the dark smoke a couple weeks ago. Any ideas on how to mount a Quad Lock if you already have a GPR stabilizer in the triple tree neck? As I was typing this the video was playing in the background. He says it’s the dark smoke. D’oh
Love your videos. Quick question btw. I am planning to buy an R1 in less than a month. Probably the 2015 due to shit customs and duty system in my country, it would run me around $30k after all the clearance. I’ve never driven one before and a couple of guys told me that 2015 also has heating issues. I know that 14 and old models had some sort of heating issues, I’ve also seen those bikes with those issues and since I am investing a life time of saving to get this dream bike of mine, I wanted to have an expert opinion. So i am asking you to advise about the 15 R1. Is that bike good? Any heating problems ?
Motonosity really glad to hear from you. Cheers man. Thank you for the reply. Understood. My guy said that the heating issue arises when you replace the original battery with the aftermarket one and it can’t keep the radiators up. Same goes for 15, I guess he was trying to sell his shitty 2008 repsol to me that’s why he said such thing about the latest models.
Ive been thinking about getting an r1, i have an 06 R6 right now and im considering selling it and buying a 2015+ r1 since it has rider modes and everything so i can dumb it down. I also sold my dirt bike recently so i have quite a bit of money saved up. What do you think R1 at 16? Or keep my r6?
Okay bro I am actually desperate, HOW did you pull the windscreen off those tabs? I am trying so hard and I'm almost positive if I push/pull any harder it's going to crack my front fairings.
The exhaust heat shield on the bottom is terrible. Don't know why Yamaha made it silver on a black bike. I ended up powder coating mine in a high heat ceramic black.
Am I the only one who likes stock mirrors on bikes? I feel like without them, they kinda look like earless dogs idk why. and the bar mirrors, imo they just ruin the look
![CUSTOM Integrated TAIL LIGHT Install! [Yamaha R1]](http://i.ytimg.com/vi/-2MeekcbscI/mqdefault.jpg)
Just picked up a 2021 R-1 after an excruciatingly painful divorce. Thank you so much for the work that you're doing. It's invaluable to someone in my situation. Love the channel, dude. Keep up the good work!!!
happy for you man😁 how are you doing?
Bro!! Same. I’m in love with the R1
mid life crisis ?
@tacc529 not so much, I'd say more of an attempt to battle depression, and trying to be able to feel some semblance of happiness or contentment. I've owned 2 R-1's in the past, a '98 and a 2006, but sold my last one when my sons were born.
Can't wait for that stock exhaust to come off
i really hope it doesnt end up being an overly loud straight piped thing again. good sound dies out once a certain loudness is reached
Stock exhaust sounds perfect rn
Me too
@@Jeff_Green could do abit deeper, a slipon would be more than enough in that regard
Daniel i have a 2 bros on mine with cat delete. Sounds butta
Call it project Raven ⚫
nice
Motonosity will make blacked out bikes great again
black bikes matter
@@Harnishchappy I see what cookie you had 😂 was it a sativa or Osama?
This guy deserves wayyy more subscribers definitely over 1 mill
He has another channel that has over 5 mill
I'm just kidding but he deserves it
Thanks man, always grinding!
I agree dude
I started screaming when I saw you put the stock chrome screws back in the windscreen please go to the hardware store and purchase some black oxide replacements
"yamaha makes the hardest windscreens to remove'
ducati - hold my beer...
Hold my Windscreen
@@MY_ER34 if you can
That looks amazing, was never a fan of a blacked out bike until today. You my man do the best mods. That puig windscreen is sweeet.
Preciate it man! I’m loving how it’s turning out.
I never thought I'd like an aftermarket double bubble windscreen. But those are sick! 🔥😮
I have a 2018 R1 in black. I will be interested to see how you like the new wind screen since I was thinking about getting the same one. Only think I don't like about the new gas cap is that now it isn't tethered and I think it would get kind of annoying set it down somewhere instead of just flipping it up out of the way like the stock one.
Project Sundown
Looks siiiick bruv
Thanks dude!
Makes hell of a difference just by making small adjustments like those in the video! end result so much better!!
The video starts at 00:00
Lies. It starts at 0:01
Look into rhinomoto for bar end that create a slot for the arrow mirrors. It’s what I use for my R6. Might be the same.
Also I believe they have block off plates for the rear pegs. Or at least hooks that cover the holes.
Wait this is motonosity? I’ve been watching his tutorial videos and these thinking they were 2 different channels😂 great channel man, it’s good for everything
Hahaha which tutorial vids you talkin about?
Get Well Soon Motonosity fam
Moto, when is the exhaust mod coming?
black stubby levers would look amazing
It’s sick! Needs a blacked out pipe now! Badass!!
Your videos are soooo aesthetic. Been a fan since the 09 White Red R1.
I know this is old, but you are supposed to remove the entire front fairing to remove the windscreen. Take off the two closeout panels on either side of the gauge cluster (2 bolts, 2 quick rivets), remove 4 nuts for the mirrors, remove the two bolts holding on the front fairing, and slide the whole piece forward.
Yo, bike is looking good!
You should take the peg feelers off too. Takes about 2 minutes to do.
You need to powder coat the windscreen hardware black. You’ll really like the little touch.
I'm gonna replace all the hardware with titanium :)
Project Name: STEALTH RAVEN
Also, if you can, for the nuts-bolts that are visible (i.e. on the fairing, front - side - back) if you can get black colored ones that would be mind-blowing.
Black is my favorite colour too.🖤
Rhinomoto makes bar ends specifically for CRG mirrors and for your bike without any drilling.
Adding an akrapovic bonnet is great
My stock exhaust coming of after 1000km i cant wait
For those bar ends I cut the adapter so that it was flat and could sit flush against the end of the bar without having to modify the bike. Easy peasy.
I did that too. Didn't turn out how I'd like. Moved around way too much since the insert is not solid.
I just can’t wait to see the aftermarket exhaust coming in!!
Whatever exhaust you go with you HAVE to get it blacked out. Idk if powercoat does it but everything needs to be black
Love your vidoes Motonosity, I have a 09 R1 like the one you had, supper happy that you back on a R1 again😁
Exhaust and some carbon parts and this bike will be siiiiiiiiiiiiiiiiick !!
When are you doing an exhaust?
Can't wait for the exhaust and ECU flash and update video on performance compared to the BMW great video
Are you gunna change the silver bolts for the screen to black. That make it look better all black fixings
I wanna do a whole titanium bolt kit, replacing everything.
Can't wait to see sc project full system exhaust on r1 ❤️
But TOCE would look better
I have a feeling he's going for an SC Project exhaust. Not just good sound but matches the bike's color as well. 🤷♂️
I'm sure you've figured it out by now... Tho rhino make good bar end adapters for these mirrors
You can drill the end of the bars it’s just a small gap so if you ever went down the throttle couldn’t get pinned wide open
WHAT!!! Regular sickness is STILL A THING!!! Wow... i thought that stuff was antiquated... :) hope all you guys are feeling better
Get well soon to you and your fam bro!
What’s up man. Ride safe
Another custom grom video coming soon?
can
cant wait for the new exhaust
I got the two brothers sr1 black serious exhaust, all blacked out on my 2020 R1
HEY HEY no rim sticker! aaaa man !!!!!!!!! thats a MUST
Moto- check out thesehead turning mods!
Jake- RIDE NEKKED!!!
Brother blazes good herb lol
Damn, looks so clean 🔥🔥🔥
Get the carbon fiber tank extender !!!
Not a fan 🤷🏻♂️
Hey man love the content! I just bought my first bike and it’s a s1000rr! I know probably not the best starter bike but oh well. Hopefully we can go for a ride someday
you should spray paint the screws from the windshield (black ofc :D)
Can't wait for the new exhaust dude🔥, new exhaust system soon.???
LighTech footpeg is awesome bro! Recommended!
Cool video sweet clean bike ,what is that you use clean it off ( Sprayed on)
Which bike do you like better s1000rr or r1
Check out Rhinomoto, they have bar ends that screw directly into factory bar weights. Not sure if they have them for the R1 but it's worth a look. I have them on my mt-07 and it works like a charm. They look really good as well.
Good work, another great Vid.
Still love my old black ZX10R (2007).
Did you install something to cover the holes after you removed the passenger pegs?
Bro, just get those cheap garden snake lights. Two sets of those and my garage is Brighter than the sun. I was able to do the engine swap on my ducati without really needing to use flashlights all that often. At work I've got a light in my mouth 24/7
I swapped out my lights with some 3 panel led things that are super bright. Not as bright as the tubes that I had in my old garage though. But I’m going to be doing a better light setup in this one. Ceiling lights can’t do what a video light can though. The video light isn’t for filling my garage like the sun haha. It’s for targeted lighting and talking head portions of stationary videos. I just wanted to show it 😉
99% sure you will do LightTech levers and Austin Racing exhaust or Leo Vince... also put a tank pad on it, so easy to scratch the tank
I've never but a front tank pad on any bike and have never scratched them lol.
@@motonosity Damn lucky!
I just picked up a ‘22 and watching your videos made me make the switch. Is the windscreen light smoke or dark? Thanks for all of the ideas.
Link in description
It’s a link to the type of windscreen not the color option. Thanks for the help Mr B
@@h2oFun oh well looking at them I'm 99.9999999999% sure it's the dark. If you look in the video and look at the smoked on the website there's a huge difference. The dark seems to be equally translucent on the site and in the video
@@mrb6206 I ended up going with the dark smoke a couple weeks ago. Any ideas on how to mount a Quad Lock if you already have a GPR stabilizer in the triple tree neck? As I was typing this the video was playing in the background. He says it’s the dark smoke. D’oh
As someone with a 2020 R1. It's hard for me to even relate to this. Crazy right? This is like a video for guys that dont even ride lol
I'm still not sold on this bike. The new fireblade is just too much better.
It's also nearly twice the price.
Wonder what a honeycomb sc project would sound like on that R1
Very cool. What happened about the front turn signals though (after the mirrors came off)?
What tools are you using? This bike looks amazing😂 I have a zx6r and I want to work on it, but I don’t have the right tools.
Nice bike
next step: vantablack all the things!
Check the rhino moto bar end mirror adapters.
Bro u should try NRC front turn signal kit its awesome bro
Damn love the bike but I definitely would have kept the mirrors love the running lights on the stock mirrors
personally i think sportbikes are the only type of bikes which look good with stock mirrors
Are you going to get the Retrofitted DRL’s for your R1
Love the bike 💯%
Did you ever consider the H2? Like after your review on it? When you were going to get a different 1000
I have the exact same bike if you took the mirrors out completely the windshield would have been 10000% easier to take out
Paint the tank white that will look really good. /s
When is the video on the turning indicators coming? Don't like what I am fi ding on the net at all. I also can't find the one you did on the R6
I might have missed it in the video. But are you going to run any mirrors at all?
Sell the sidemirrors to me 😁. Need them for my R25 mod
Looks so damn good, are you going to do black hardware aswell?
CRG adaptor can be ground down to sit flush. Your welcome.
I already did that. It’s too loose because the insert isn’t solid. You’re welcome.
@@motonosity ah disappointing, thanks.
This Bike would look amazing with a under tail carbon fiber exhaust
Love your videos. Quick question btw. I am planning to buy an R1 in less than a month. Probably the 2015 due to shit customs and duty system in my country, it would run me around $30k after all the clearance. I’ve never driven one before and a couple of guys told me that 2015 also has heating issues. I know that 14 and old models had some sort of heating issues, I’ve also seen those bikes with those issues and since I am investing a life time of saving to get this dream bike of mine, I wanted to have an expert opinion. So i am asking you to advise about the 15 R1. Is that bike good? Any heating problems ?
You don't have anything to worry about. They ARE hot, but not to the detriment of the bike.
Motonosity really glad to hear from you. Cheers man. Thank you for the reply. Understood. My guy said that the heating issue arises when you replace the original battery with the aftermarket one and it can’t keep the radiators up. Same goes for 15, I guess he was trying to sell his shitty 2008 repsol to me that’s why he said such thing about the latest models.
Ive been thinking about getting an r1, i have an 06 R6 right now and im considering selling it and buying a 2015+ r1 since it has rider modes and everything so i can dumb it down. I also sold my dirt bike recently so i have quite a bit of money saved up. What do you think R1 at 16? Or keep my r6?
Can anyone tell me how he makes the video fit the screen of an iPhone X and up different than what most videos look like??
Okay bro I am actually desperate, HOW did you pull the windscreen off those tabs? I am trying so hard and I'm almost positive if I push/pull any harder it's going to crack my front fairings.
idk if i’m right on this but i thought it’s a law to have those reflectors on the front wheels
It is the law but the cops won’t pull you over for it
You need black bolts instead of silver one's. :D
The stealth bomber
You made me buy a 2020 r6
But why though?
My 06 R6 has a terrible windscreen, waiting for it to get back from the shop, start intalling everything.
The exhaust heat shield on the bottom is terrible. Don't know why Yamaha made it silver on a black bike. I ended up powder coating mine in a high heat ceramic black.
What about the suspension? It's not black, but still looks nice anyway
Waiting For the Exhaust
Can you do project cafe racer to a sporty looking bike?
Is it legal to take down the reflectors(shiny orange things in the front)?
Am I the only one who likes stock mirrors on bikes? I feel like without them, they kinda look like earless dogs idk why. and the bar mirrors, imo they just ruin the look
MotoGP bikes don't have mirrors 🤷
yooo it's an obsidian r1