I don't think many people mention it but I really love the aspect ratio that you record your videos in. It's more cinematic than the standard 16:9 but doesn't create the obnoxious black bars like a 21:9 video would on a 16:9 monitor/phone. It's the little things my friend. Bravo sir
Love the attention to detail you put into every one of your mods and I wish more people would care about all the small things as much as you do, because the quality just ends up being so much better. Love the way that integrated light looks and the side pod lights really complete the menacing look of the rear end. Much more like a Panigale tail now!
-Motonosity: ill get an R6 -Me: ill get an R6 -Motonosity: selling R6 -Me: selling R6 -Motonosity: ill get an R1 -Me: ill get an R1 Hopefully you dont sell this one
Dude same. I feel like we have the same taste in bike mods so I find myself doing the exact mods he does minus the wraps haha...Brent is cool. Maybe one day when I’m in Texas I’ll get the chance to meet you.
The quality of these videos is awesome, and I really respect the attention to details you always have. Keep it up man and stay safe with your family during these times.
Oh man when you were drilling into the plastic, i was praying you didn't do the same mistake that you did on the R6! The bike looks Amazing! can't wait for more!!
Man, I am glad you made this video. I just picked up a 2020 R1 and had ordered a NRC fender eliminator because that's what I had on my 959. After watching your video with this signal setup and the TST eliminator, I sent the NRC stuff back. I just installed the TST eliminator and JL Designs signals and I think it looks incredible! Good call on this stuff man,
I got the same set for my R6 instead of splicing and wiring and what not, I went to lowes and bought some “tap in” connectors that like the name implies taps into the wiring making the whole process so 10x easier.
That tail light is honestly gorgeous. Really wish manufacturers would make it a bit easier to disassemble a bike, especially one with such a heavy modding scene behind it like the R1. I'm currently doing very similar stuff finishing off my SV650s project, just making everything look a lot sleeker and neater, like with the R1. Really good job on the install (and totally not super jealous about the beautiful bikes you own!)
It's really not that bad, just a few extra push pins and bolts here and there. My S1000RR is actually the easiest sportbike I've owned for simple disassembly.
That's an awesome integrated taillight kit! I probably would've left the switchback wires disconnected so the turn signals only turn on when I'm signaling. It could be the camera but it seems a bit bright while running and not that noticeable when it switches to signaling under normal lighting conditions. Suuuper clean wiring job man! 👌🏾
That was the first thing I noticed. I don't like it because of that fact. Curious on if it looks better at night and in person but I don't see the functionality if you can barely see the signals.
I just completed this install on my 2019 R6 Sunday. The tail light brown and yellow wires literally have no slack as well. It’s unforgiving if you mess up and have to recut them. Turned out nice though after I was finished and soldered everything!
Yeah what I should have done was use those screw type splice connectors that allow you to tap into a wire without cutting it. My whole setup came out super clean though. Just time consuming.
After you got your 2017 R6 it was confirmed I needed one. If everything goes according to plan I will get 1 of the last 4 my local dealer is getting since they will be discontinued after this year. Thanks for explaining things as you go and for your great taste in bikes/aftermarket parts 😜
Looks sick! And I'm glad on my/the 2020 MT07 that you dont have to fold the corners of the main seat like that. I'd be afraid of it getting creases from taking the seat on and off
Awesome! I got the same kit but didn't get the dual function. We have so far made the same mods. I added the license plate light though. Had to fabricate a plate to use it since it's installed where yours is. Ordered my AR DeCat exhaust as well. Still waiting! On week 7 now.
@ Motonosity I have the same R1. Remember there is NO LEGITIMATE ECU FLASH FOR OUT BIKE YET SO LEAVE THE EXHAUST ALONE. 2020 R1 ECU HAS NOT YET BEEN CRACKED. I used the BLASTER X intergrated tail light THE BEST. TST FENDER ELIMINATOR LOW MOUNT.
Looks great! Also love you are repping the Ruroc hat too. I just got my Shogun helmet this week. Love your builds man and your videos are very informative as I got my luimoto seat from watching your stuff too.
u stick the signal lights to below the little fin.... now do 1 more set but it is stick to the top of the little fin. so u have 2 on each side... it should illuminate more. :) and disable the usage of the brake light as a signal light. keep it as a brake light.
I’d probably leave the brake light functionality of the turn signals off the red is too bright and drowns out the yellow you can barley notice when they’re on
@@Nadalone probably not as i said before you will only need to have 2 wires connected to have them work like normal blinkers its just a case of which wire does what, so connect and see what it does
The tail light is integrated as well, as demonstrated. Having the additional signals add a more clear signal in the rear ( hard to really distinguish direction in the tail light) and I love how the side leds look.
that looks great oem even, but i have to ask why the fender eliminator? I get it looks better but you know your gonna get pulled over for it. The license plate alone will net you a ticket. Its one of the many reasons why i don't get some bikers motives.
Aww man.. can’t believe you gotta remove all that to get the taillight out! I went with the blaster x integrated taillight and just installed the tst low mount fender eliminator Edit: are you running no license plate light?
I don't think many people mention it but I really love the aspect ratio that you record your videos in. It's more cinematic than the standard 16:9 but doesn't create the obnoxious black bars like a 21:9 video would on a 16:9 monitor/phone. It's the little things my friend. Bravo sir
Love the attention to detail you put into every one of your mods and I wish more people would care about all the small things as much as you do, because the quality just ends up being so much better. Love the way that integrated light looks and the side pod lights really complete the menacing look of the rear end. Much more like a Panigale tail now!
Thanks a lot man, really appreciate that! Yeah that kind of 3 point light kinda gives a bit of a Panigale look :)
I have no clue who this guy is but i enjoyed it, youtube's algorythim be doing a fantastic job
Ayyy thank you bro! Love to hear that.
This is exactly how I found this channel over a year ago. Been here ever since! Sometimes the algorithm hands you an absolute gem and you never leave.
Hayden Weir who’s cutting onions over here 😭✌🏻
Motonosity I am every time I get jealous of your R1 😂 Keep up the incredible content dude. You never cease to amaze your audience.
Motonosity lol i found you back when you crashed the wr
That’s how it should of came from the factory. It looks sooo sweet
Agreed
i totally agree, theres just one problem. it would be illegal in germany and probably other places because they're too narrow to the middle
Illegal in the U.S. as well so sad.
-Motonosity: ill get an R6
-Me: ill get an R6
-Motonosity: selling R6
-Me: selling R6
-Motonosity: ill get an R1
-Me: ill get an R1
Hopefully you dont sell this one
What are you gonna do if I do?!
Motonosity keep buying the same bike and do same build as you do.🤪🤣🤣🤣. Big fan of your work keep it up. 👍🏼
Dude same. I feel like we have the same taste in bike mods so I find myself doing the exact mods he does minus the wraps haha...Brent is cool. Maybe one day when I’m in Texas I’ll get the chance to meet you.
Bro be unique, don’t be a sheep 🐑!
Its because Its So clean bruh
That is by far the cleanest tail light set up. I have ever seen. Stay safe and stay healthy. Oh and you have the most adorable assistant.
The quality of these videos is awesome, and I really respect the attention to details you always have. Keep it up man and stay safe with your family during these times.
3:00 I smiled to myself when you said this as I thought is was going to be that simple too when I did mine
That’s such a good idea heating the 3m tape before sticking it. The tail Looks amazing and super clean, good job.
I love the sound of factory torqued hardware being cracked loose for the very first time
I didn't know I appreciated this sound until now
I thought I was the only one
I'm a fan of the turn signals being integrated into the rear light. Cleaner look and less hassle.
Oh man when you were drilling into the plastic, i was praying you didn't do the same mistake that you did on the R6! The bike looks Amazing! can't wait for more!!
Man, I am glad you made this video. I just picked up a 2020 R1 and had ordered a NRC fender eliminator because that's what I had on my 959. After watching your video with this signal setup and the TST eliminator, I sent the NRC stuff back. I just installed the TST eliminator and JL Designs signals and I think it looks incredible! Good call on this stuff man,
R1 is one of my favorite motorcycles , it is sick bro !! i love your channel
Thanks man! Glad you’re enjoying the vids
I got the same set for my R6 instead of splicing and wiring and what not, I went to lowes and bought some “tap in” connectors that like the name implies taps into the wiring making the whole process so 10x easier.
Dude!! All I can say, is "SWEET!!".. I'll be getting an R1M at some point, and Iam getting that setup without hesitation. Beautiful bro!!
R1 is my favorite specialy the crosplain engine sounds more than ducati V4
Wooot whos exited for a new brent video
That tail light is honestly gorgeous. Really wish manufacturers would make it a bit easier to disassemble a bike, especially one with such a heavy modding scene behind it like the R1. I'm currently doing very similar stuff finishing off my SV650s project, just making everything look a lot sleeker and neater, like with the R1. Really good job on the install (and totally not super jealous about the beautiful bikes you own!)
It's really not that bad, just a few extra push pins and bolts here and there. My S1000RR is actually the easiest sportbike I've owned for simple disassembly.
I can finally do this after 3 years. Had the 14 r1 when I saw this but now I have the 23 R1
That's an awesome integrated taillight kit! I probably would've left the switchback wires disconnected so the turn signals only turn on when I'm signaling. It could be the camera but it seems a bit bright while running and not that noticeable when it switches to signaling under normal lighting conditions. Suuuper clean wiring job man! 👌🏾
Yeah to each their own. Lots of possibilities! It’s definitely easier to see a difference in person.
That was the first thing I noticed. I don't like it because of that fact. Curious on if it looks better at night and in person but I don't see the functionality if you can barely see the signals.
That looks awesome! Really cleans up the tail nicely. Good choice!
Thanks for the vid bro.
I bought an R1 without stock fender and this turn signals looks a very good option. Looks amazing. Cheers from México 🇲🇽
I love the way you build your bike Motonosity. It’s unique
Thank you!
You sir have had my sub since 2014 and I still get excited to see these mod videos! Love the effort you put in to make it look factory 😍😍
Thanks bro!
Only thing I DONT like is that the turn signals aren't smoked as well. Id have to put some tint over them 😂
They are smoked. Might just not look that way on camera?
@@motonosity Guess I'd want even darker then. Like the same level as the taillight
redgtr yeah that’s fair. The led panel itself is white so up close you can tell. At a distance though it all blends in
I knew u wld take dis LED tail light...cuz u did the same thing to ur R6❤️
I just completed this install on my 2019 R6 Sunday. The tail light brown and yellow wires literally have no slack as well. It’s unforgiving if you mess up and have to recut them. Turned out nice though after I was finished and soldered everything!
Yeah what I should have done was use those screw type splice connectors that allow you to tap into a wire without cutting it. My whole setup came out super clean though. Just time consuming.
Motonosity I agree! Very clean but time consuming! Safe riding man
After you got your 2017 R6 it was confirmed I needed one. If everything goes according to plan I will get 1 of the last 4 my local dealer is getting since they will be discontinued after this year. Thanks for explaining things as you go and for your great taste in bikes/aftermarket parts 😜
Looks Great! Alot of editing time went into this video! HIT that like button!
Looks sick! And I'm glad on my/the 2020 MT07 that you dont have to fold the corners of the main seat like that. I'd be afraid of it getting creases from taking the seat on and off
I have the same tail light on my R1. One of my favorite mods for sure
Those lights look sick man. Probably the best I've seen for the new r1s! Good stuff
Ive been here since the CRF450R Supermoto build!!
Awesome! I got the same kit but didn't get the dual function. We have so far made the same mods. I added the license plate light though. Had to fabricate a plate to use it since it's installed where yours is. Ordered my AR DeCat exhaust as well. Still waiting! On week 7 now.
@ Motonosity
I have the same R1.
Remember there is NO LEGITIMATE ECU FLASH FOR OUT BIKE YET SO LEAVE THE EXHAUST ALONE. 2020 R1 ECU HAS NOT YET BEEN CRACKED.
I used the BLASTER X intergrated tail light THE BEST.
TST FENDER ELIMINATOR LOW MOUNT.
Wow that looks 🔥🔥🔥🔥🔥btw I love the way you explain everything makes it a lot more understandable cheers mate
Practice makes perfect! You didn’t drill the hole on the wrong side this time. Like the R6. 😂🤙🏽
That was some spider web of wires! Well worth it tho it looks so much better! Nicely done :)
Damn, that was a lot of work but you cleaned it up so well!
I would preferred to smoke the OEM taillight but that one looks cool too
Now Im sold! Im getting R1.
That is one heck a fine looking rear! Wonderful job with the wiring too. Thanks for the ever interesting content 👍🏻❤️
Looks great! Also love you are repping the Ruroc hat too. I just got my Shogun helmet this week. Love your builds man and your videos are very informative as I got my luimoto seat from watching your stuff too.
Preciate that man! Hope you’re liking the gear!
Can’t wait to see what exhaust u gonna go with awesome bike and video take care buddy
Installed my luimoto seat cover and gel yesterday. Wow!!!
Heck yeah man! You like it?
@@motonosity love it. They did a custom color combo not on the website and their customer service was amazing.
paintslinger 104 That’s the way to do it 🙌🏻 Good to hear dude!
Like you I don’t care how much I have to take off to get the job done,it’ll be great in the end that’s all I see great video DUDE
nice it makes a big difference. I love the way it looks now. 👍congratulations.
man if im interested in bikes like this dude....i would be aimin for motogp fr
now its perfect
u stick the signal lights to below the little fin.... now do 1 more set but it is stick to the top of the little fin. so u have 2 on each side... it should illuminate more. :) and disable the usage of the brake light as a signal light. keep it as a brake light.
Those push pins always gave me trouble putting them back in on my 18 r6
Dude!! The mods are rad!!
The R6 side signals looked better because they were the same shape as the fin, I remember you drilled the hole on the wrong fin 🤣
Tail light is nice but I kept the OEM one just because it was ALOT brighter. It was a hard decision though.
Thank God you drilled the holes right this time🤣
Yamaha is Dopest 👌👌🏁
Does look dupe motonosity keep up with the great content 👌🏻
I can see ur hardwork..keep it up
I’m about to do this to my 21 R1!
Love the lights but I can't bring myself to drill into my bike. So I'll with a non drill install of a different brand.
Love what you did with the license plate mount. Is that custom? or is it a kit of some kind. No tag light I assume?
I’m literally building a little brother version of your R6 and R1 I bought a 2020 raven R6
Great minds think alike
Amazing work brother 🔥💯🤩
I’d probably leave the brake light functionality of the turn signals off the red is too bright and drowns out the yellow you can barley notice when they’re on
Now you only have to get rid of the passenger pegs and then the back of the bike will look perfect 👀
Only thing I wouldn't do is make the indicators running red tho
I bought the exact same one, is it possible to leave indicators not running red?
@@Nadalone I mean there should be a way
@@Nadalone normal indicators have 2 wires one that connects to ground and one for power
@@plumestuning Do I need to use the Dual Function wires if I want the indicator light not to run red?
@@Nadalone probably not as i said before you will only need to have 2 wires connected to have them work like normal blinkers its just a case of which wire does what, so connect and see what it does
Awesome video as always my bro 😊
I"m already loving the bike.
Edit: You Happy!?
You said already twice
@@bobbylight4262 i didn't say it twice i only said it once
Chazz Delgado bruh can you not spell ? 😂
@@miguelr2681 Bruh I'm not talking to you! Now shut up!
@@chazzdelgado bro read it slowly again
Looks nice but when was the last time you saw a sports bike rider use turn signals or be riding slow enough to see them if they did?
I sold my fz07 a couple months ago.
really want another bike. maybe a drz400sm. i want to do clean builds like u motonosity
They are proud of them turn signals, cost more than the tail light! Cool but not $160 cool.
Looks super cool!
i like the stock one tbh
Looks really clean but I would have not ran the turn signals and had then integrated in the tail light itself. Just my thought.
The tail light is integrated as well, as demonstrated. Having the additional signals add a more clear signal in the rear ( hard to really distinguish direction in the tail light) and I love how the side leds look.
@@motonosity I understand
I've had this on my R6 since 2017, there isn't a better looking taillight and signal set out there
It's so clean. Looks OEM! Well, if OEM stuff was this cool haha
They look decent when lit up. Not when you see em at daylight
Looks amazing!
that looks great oem even, but i have to ask why the fender eliminator? I get it looks better but you know your gonna get pulled over for it. The license plate alone will net you a ticket. Its one of the many reasons why i don't get some bikers motives.
Is it Austin racing exhaust 🔥🔥
How long for the shipping?
Aww man.. can’t believe you gotta remove all that to get the taillight out! I went with the blaster x integrated taillight and just installed the tst low mount fender eliminator
Edit: are you running no license plate light?
When's the "Changing the exahust" video coming?
Shouldn’t you test the turn signals to make sure they work before 3m taping it to bike?
Life goals, great video 🔥
That looks soooo good!!!!
preciate ya!
Nice to see you learned from last time and didn't drill the hole in the wrong place again lol, bike looks slick
Checked things like 6 times first lol
That was a dope one light... Keep it up... God bless
I really want you to get an exhaust for this bike 😍
I installed and love it on mines.
Do I need to use the Dual Function wires if I want the indicator light not to run red?
Do you think the R1’s are the BEST out of the 1000cc Liter bikes Club???
hey man, love the vids. Did you have to change the flasher relay ?
Waiting you post change exhaust system video
You got to throw a tank pad on that puppy though!
I'm pretty sure this does but I want to be sure before I purchase it. this also fits on a 2021 Yamaha R1? The link to the website shows 2015- 2020
@Motonosity what part of Texas do you live in? Great video keep up the good work. I’m definitely buying these lights for my R1 now.
That is clean
*Motonosity* Love and respect
Always :)
great
Sorry to keep commenting on all your videos...the CUSTOM Led brand has a brighter tail light. And they come in smoke now. And made in USA