Nice chil video man. Looks really good. I'm running the 96-98 airwalker gotta love icb motorsports Matt hooked it up. Can't wait to see your car up and running again. Always great videos guys.
@@kraftingkars a counter or table with a little heat makes the difference low and slow. The mesh is on point just needs a little planning prior to unrolling and applying
I used my factory bumper as a guide, otherwise just tape the bumper in place and make the holes by the grille/radiator support. And I just like to use quick release on the sides so the bumper won't crack if I hit it on the ground
So luckily for me this aftermarket bumper came with them molded in, but you can easily make them yourself out of fiberglass resin, or possibly by epoxying on some p-clips, and running the zip ties through those. I have seen some people drill some holes out of sight on the bumper and run zip ties through those as well!
That would work! I thought about hot glue, since you could always heat it up to remove it. Other glues may be a little too messy and a little too permanent for me!
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Watch out he's got eye protection and zip ties, this man can do anything.
You better believe it!
I like how you turned the Dremel on w a cutting blade, and then put it next to your face to lower your safety glasses
I did that for you!
that came out clean great video brother
Thanks man!
Nice chil video man. Looks really good. I'm running the 96-98 airwalker gotta love icb motorsports Matt hooked it up. Can't wait to see your car up and running again. Always great videos guys.
Thanks for the support Julius! Love this bumper as well! Best part is there is no trimming required to fit a large intercooler!
Awesome job!
Thanks man!
Very nice have the same insert for my 07 cts was a pain to roll out tho!
It sure is! They ship them rolled up pretty damn tight
@@kraftingkars a counter or table with a little heat makes the difference low and slow. The mesh is on point just needs a little planning prior to unrolling and applying
Thank you for this link
Dude awesome video and great job but you need to throw that couch in that fire!
Hey dog that's my grandpa's old couch 😂
Nice video, just subbed ! Just got the same bumper today, how would you recommend installing it, it came with no holes or anything
I used my factory bumper as a guide, otherwise just tape the bumper in place and make the holes by the grille/radiator support. And I just like to use quick release on the sides so the bumper won't crack if I hit it on the ground
@@kraftingkars Thankyou so much ,just ordered some quick releases
cool video where do i buy the tabs at.
You can make them out of small fiberglass strips. Otherwise you could use P clips. Or even glue the mesh to the plastic 👍
No towel on the ground to keep it from scratching???
Your mom never gave my towels back!
Where did you buy the bumper? Thinking about getting one for my civic can you send me a link? BTW love the channel keep it up 🔥
www.icbmotorsport.com/airwaciek96s.html
www.ebay.com/itm/222758532186
@@kraftingkars which one do you have?
@@thelostkidsgarage the one sold from eBay! They usually have it in stock
@@kraftingkars alright thanks! The fitment looks good ❤
Good vibe bro
Glad you enjoyed it! Tryna keep it layed back for now! But the video's should get alot more exciting when I'm out rippin the civic on the streets!
@@kraftingkarscan t wait to see the gear and b16 rebuild . I also got a type r lsd too.
@@hughscheper1651 my man!
Where did you get them bumper? Do you know if that company makes some for 99-00 ?
www.icbmotorsport.com/airwaciek99s.html you can get them here, there is also plenty of reps online
Where did you get the mesh
Amazon baby
Dig the bumper papi
Thank you son! I will never forget your kind words!
Where did you get those tabs
So luckily for me this aftermarket bumper came with them molded in, but you can easily make them yourself out of fiberglass resin, or possibly by epoxying on some p-clips, and running the zip ties through those. I have seen some people drill some holes out of sight on the bumper and run zip ties through those as well!
Did u send the block to get css?
Still waiting on those darn pistons! Once I get them I'm shipping the block out right away since I have enough $$$ saved up now!
It' home made for real!...
nice
There is way better mesh it there for even 35 dollars bro n you can actually see this one lol. You should change it
I wanted to be able to still see my intercooler underneath and protect it at the same time
I think I would just glue it
That would work! I thought about hot glue, since you could always heat it up to remove it. Other glues may be a little too messy and a little too permanent for me!
@@kraftingkars I found a video, shortly after leaving this comment. Dude lists the proper glue... Hang on, I'll fetch a link.
@@kraftingkars ruclips.net/video/88GGCU0c7Fo/видео.html
@@emilyhofland8219 thanks!
@@emilyhofland8219what glue?