this is arguably one of the best custom grill tutorials there are. I love the background music mixed with the guide. Works well and very easy to watch! greqat job
Great video and explained well 👌🏽. I've been searching and skipping through videos for the past hour and a half now, this is by far the best I've come across without a doubt . Thanks !
Thanks! If you're looking for more installs, a lot of our newer content is just as good and updated with new tools and techniques that you might find useful too.
If you browse our site and can't find what you are looking for, then feel free to email me and I'll try to give you a quote on what you're looking for.
great video, great instructions. helped me out with better understanding the process of custom making grille for my car (since there is not one for my car at the moment). +rep
Hi Matt I must say that your work is really done well. Ive ben watching and learning from your videos and have a question. In one of your videos, you used a tool to bend the steel mesh at a 90degree angle. What is the name of that tool? Thank you much for the great videos.
Is it possible to take a grill off a yukon Denali and use jus the insert part on a yukon xl? It almost worked jus swapping the hole front grill but the daytime/parking light housing were different.
The sandpapers I used on this were likely a 200, 350, and 600 grit. For Goop substitutes, PermaPoxy can work well, and we've seen some installs where customers Bondo mesh on. I've heard of some people using Gorilla Glue on installs too, though I've yet to try it.
customcargrills I would like for you to install a mesh front on my grill.If I shipped you my grill from my 89 Mercury could you customize it for me?If so can you give me an estimate of the total cost.
this is arguably one of the best custom grill tutorials there are. I love the background music mixed with the guide. Works well and very easy to watch! greqat job
Great video and explained well 👌🏽. I've been searching and skipping through videos for the past hour and a half now, this is by far the best I've come across without a doubt . Thanks !
Thanks! If you're looking for more installs, a lot of our newer content is just as good and updated with new tools and techniques that you might find useful too.
@@customcargrills will do, I'm gonna check out the website as well. is there a quote option on there
If you browse our site and can't find what you are looking for, then feel free to email me and I'll try to give you a quote on what you're looking for.
Great Vid Mate you missed your calling! Easy to follow great instruction.
Nice method and I appreciate you sharing. It would have been nice to see it on the truck.
Wow. Great video. Great job. Best grill mod tutorial. Thanks brother!
Very good idea Thanks m trying to make ford fiesta front grille
Great to hear. I'm not sure which year Fiesta you have but I have a video specific to the ST model here: ruclips.net/video/_rninoeTFoE/видео.html
Nice looking grille!
great video, great instructions. helped me out with better understanding the process of custom making grille for my car (since there is not one for my car at the moment). +rep
Amazing work, easy explanation.
Glad you liked it!
Erik, the name of the tool you're looking for is a Sheet Metal Vice Grip.
customcargrills A sheet metal brake.
Thanks for sharing. ....great video, now I have another project lined up....
Great diy grill 😃👍
Hi Matt
I must say that your work is really done well. Ive ben watching and learning from your videos and have a question. In one of your videos, you used a tool to bend the steel mesh at a 90degree angle. What is the name of that tool? Thank you much for the great videos.
Brill mate doing my saabs soon
what are those scissor straight cut left cut right cut i found those but witch ones is it?
Those are straight cut tin snips
Great job and thank you for not just attaching it with zip ties like everyone else is doing lol
Wish you had some for challengers
I think I could make something for the Challenger. Hit me up if you happen to be local to west Michigan.
looks great mate.
Good Job
really liked this video
I must say..Great tuturioal!
I'd like you speak to you about some custom work!
SICK!!!
Which Dremel disc?
Dedicated plastic cutting wheels?
They have dozens.
Nowadays I use the #543 disc
i wanna see you guys do a 99 f-250 grille
Is it possible to take a grill off a yukon Denali and use jus the insert part on a yukon xl? It almost worked jus swapping the hole front grill but the daytime/parking light housing were different.
It might be possible but I think it would require some very precise cuts and a some bodywork afterward to make it look right.
Whats an alternative to auto goop?
Thank you.
Darn it ... now I have something else to do lol
Where do you buy the mesh?
The mesh shown in the video is available here: www.customcargrills.com/Perforated-Grill-Mesh.asp
good mate
Awesome
VerRryYy..VerrYyy Nice Tut!! (y)
U mind telling,
-The sand ppr no.
-Substitute to "automotive amazing goop"
The sandpapers I used on this were likely a 200, 350, and 600 grit.
For Goop substitutes, PermaPoxy can work well, and we've seen some installs where customers Bondo mesh on. I've heard of some people using Gorilla Glue on installs too, though I've yet to try it.
What grill mesh is that? Looks great.
It's the Perf GT mesh seen here: www.customcargrills.com/Perforated-Grill-Mesh.asp
Do you have a sheet bigger then 16"×48" i need something like 27"×48" im going to do a grill for a chrysler 300 it measures 24"x27"
Yes, we do have some 24"x48" sheets of this mesh in stock. You'll need to call or email me to order that specific size.
Will do thank you
nice
Much cheaper than getting an insert.
WOW
Plz share the name of the glue you are used
It's called Automotive Goop
What type of mesh is this
The mesh is the "Perf GT" mesh we have here: www.customcargrills.com/Perforated-Grill-Mesh.asp
Where do I buy the mesh?
www.customcargrills.com The mesh used in this video is the "Perf GT" mesh in the Perforated section of the grill mesh sheet section.
I would pay you to do my grille are you close to Baltimore Maryland ?????
I'm in Michigan. Feel free to email me though if it's something we can make and ship.
What is the first tools name?
Dremel
how thick is the metal you used and where can I find a piece of it?
It's 14 gauge aluminum and I have some available here: www.customcargrills.com/Perforated-Grill-Mesh.asp
customcargrills how much Doe's you charge
The meshes can range from about $15-199. The one shown in this specific video currently retails for $45 + shipping.
customcargrills I would like for you to install a mesh front on my grill.If I shipped you my grill from my 89 Mercury could you customize it for me?If so can you give me an estimate of the total cost.
Feel free to email us (contact info on our website), and I can look into a quote for your vehicle.
What name the gum??
Automotive Goop