@@thawkproductions4248 my 2005 2500HD has the fog light pigtail connectors hanging down low, if you remove both headlight sections, its a 2 wire leading off down ward, i followed it wondering what it was, its just open to the elements i thought was odd. Truck still has the openings covered, clearly not like they were deleted.
@ actually I just found at Auto Zone I could get the hardware to install the fog lights! Because when you ordered your fog lights did they come with the hardware like the bolts and U nuts or whatever they’re called etc? But amazing video man very well shown and described. 🔥
I have an 05 an installed foglights with turn signal in them but for some reason when I break the amber turn signal lights up. You have any ideas why this is
Hey I did everything you said but mine didn’t work. When I press the foglight button it clicks on the relay but the lights don’t turn on and I was wondering if you might know why?
@@joeamartinez5842 cause its wired through the bcm so in order for it to work, the bcm has to be reprogrammed for it to accept the added foglight setup.
This is literally the BEST video breakdown for this. So quick and easy. Thank you!
Thanks man! Glad it was helpful!
@@thawkproductions4248what size pin did you use for the fuse box?
Could you show how u connect them all together without the wire loom. What kinda connectors did you use also? @@thawkproductions4248
Great video! Straight to the point! Definitely using this today to install my lights. Thanks!
Glad I could help, how'd the install go?
Awesome video dude!! Got all the right angles
Thank you thank you
that is one clean diy retrofit/upgrade! 👍🏼
Which size pin is required for the fuse box
Its odd they don't have the wires hidden in the harness for the fogs, but everything is there from fuse box to panel.
I thought the same thing! It would have been nice if there was some connectors tucked up behind the bumper
Most of the trucks did come with the harnesses atleast on 1500s. I've only seen one ever that didnt and but it was a custom built
@@thawkproductions4248 my 2005 2500HD has the fog light pigtail connectors hanging down low, if you remove both headlight sections, its a 2 wire leading off down ward, i followed it wondering what it was, its just open to the elements i thought was odd. Truck still has the openings covered, clearly not like they were deleted.
Amazon! It's all in the description (similar items at least)
What are you saying you don’t have to run any wires to that new switch that goes in the dash just the way it was already plugged into it
I was wondering the same, but it Looks like they are already there..
I'm thinking of getting the Connector Wire, Has it burnt out because reviews are saying it burns out in the 2 week range.
Did the wiring harness come like that or did you fab it up?
I made the harness. Little bit of solder, few crimps, and some wire lol
@@thawkproductions4248did you repin the connectors or did you splice? If you did repin is it the same pins as the relay?
@Tiovergudo the connectors came with pigtails, so I just spliced them in.
If you had to pin them, they would be different terminals than the relay
getting ready to do this on my Sierra and couldn't find a diagram anywhere, THANK
Glad I could help, you're welcome!
I always thought yellow lights were better for fog. Why do I see everyone using white lights. Are they a different white..?
@@bigredlibra I use mine every night, just to have more forward facing light. Not specifically for fog
If my car has integrated fog lights in my headlights am I able to just buy an extension cable or hid kit?
Did you have to have to have the truck flashed to add the install ?
@@dennis4445 no flash required. Everything I did is right here in the video
My fuse block has 2 purple wires connected to it right where you’re supposed to have the new one
Factory purple wires, or previous owner purple wires? lol
@@thawkproductions4248 yeah i already had the wiring for the fog lights but no fog lights
Where can I get the fog light hardware?
@@Suavecitostruckinaround1
Everything I used should be in the video description. Otherwise what hardware are you talking about?
@ actually I just found at Auto Zone I could get the hardware to install the fog lights! Because when you ordered your fog lights did they come with the hardware like the bolts and U nuts or whatever they’re called etc? But amazing video man very well shown and described. 🔥
On the Amazon link you posted for the female adaptors is that the right length or do you have to buy more wire?
@@nicolasmerino1915 the leads are only 6"
You'll need more wire
@@thawkproductions4248 thank you
Does this work 99/02? Silverado’s?
bump
@@luckyfoxwood bump indeed
I have an 05 an installed foglights with turn signal in them but for some reason when I break the amber turn signal lights up. You have any ideas why this is
Do they also work as blinkers?
Best video on how to do this
Thank you thank you! Glad I could help
Thank you! need you to do one for a touch screen radio now 😅
@@nickdibiase123 if I didn't hate touchscreens I would 😂
Hey I did everything you said but mine didn’t work. When I press the foglight button it clicks on the relay but the lights don’t turn on and I was wondering if you might know why?
Did you ever find out what the problems was ?
@@martinmeza408 no I just hooked it up to my low beams
@@youngkillerhd8593 do they work good or what ?
@@martinmeza408 yes they do but the foglights are always on which I like but some people don’t
@@youngkillerhd8593 ahh yess I get you I’ll try to do it the video way first and if it don’t work then I’ll just do it your way man thank you!
Where did you buy the whole kit?
All Amazon things, idk if all the exact parts are still available but similar/ish parts are in the description
😤 finally did this install the factory way. ground, hot, fuse, relay and switch BUT 99-02 has to b programmed $200 @ dealership SMDH!
@@sean.g4516 damn! That sucks!!
Can you please explain why it needed to be reprogrammed
@@joeamartinez5842 cause its wired through the bcm so in order for it to work, the bcm has to be reprogrammed for it to accept the added foglight setup.
$200 for a 10min job on a keyboard SMH
Looks like Weatherpack connectors
Solid job man
Thank you
Nice video man
Thank you thank you
Nice video!
Thank! Hope it helped
Nice video
Which size pin is required for the fuse box
Which size pin is required for the fuse box
Which size pin is required for the fuse box
Which size pin is required for the fuse box
Which size pin is required for the fuse box
APTIV Metri-Pack 280 Series, Female Terminal
Depending on what size wire you use they have ones with barrel sizes from 20g-12g
Which size pin is required for the fuse box
Did you ever find the right pin?
Which size pin is required for the fuse box