Tips and Trick using the Smartstich embroidery machine.
HTML-код
- Опубликовано: 25 авг 2024
- Smartstitch Commercial Embroidery Machine:
www.amazon.com...
Blower: amzn.to/3PcMOqO
Bobbin: amzn.to/3TowGVM
Stabilizer: amzn.to/4a2EUsb
Scissors: amzn.to/3TslCan
Digitizer:
Join my Patreon Group for 1 on 1 and group support:
/ laserengravingwithmatt
Check out our vlog channel, @Matt & Sara: / @mattsara2802
Shop our favorites:
Thunder Laser: www.thunderlas...
UV Laser: www.wiselylase...
XTool:
www.xtool.com/...
Mactron Fiber Laser: mactron.aliexp...
Etsy Search Engine tool: salesamurai.io/.
Use Coupon Code: MATT20 for 20% off
Compressed Air: amzn.to/3Rc779p
Glue I love: amzn.to/3sTbpJl
Laser Dark: www.laserdark.c...
Transfer Tape: amzn.to/3TjUHKo
Brilliance Spray: amzn.to/3LVTp84
Ruler: amzn.to/443IkIN
Caliper: amzn.to/436a3ap
Business Cards: amzn.to/3pgtuzr
JDS Patches: shop.jdsindust...
Item #PTHSET3A
Awesome Hats: amzn.to/3qLluGX
Cermark Black Spray: amzn.to/3qqndkM
Blue Tape: amzn.to/3qASP7z
Desk: bit.ly/3LhfYUC
Keyboard: amzn.to/3FB1MCm
Sanding Disks for glass: amzn.to/2JCm9W4
Laser Clamp Pins: www.etsy.com/l...
Best book for beginning your business (Hard copy or audio): amzn.to/3tVg0ef
3D Printer: s.zbanx.com/r/...
ref=w86Oew0Jk4nD&
Powder Paint: amzn.to/3Nhq5qS
Gasket Making Material: amzn.to/3ls4C2h
Blue Tape: amzn.to/3FNzS3a
LA's Totally Awesome Degreaser: amzn.to/3tGhmaT
Super Clean Degreaser: amzn.to/3oIvBt5
M8 Fan: amzn.to/2Z08qQr
External Hard Drive: amzn.to/32OVoqy
Cermark: amzn.to/3EKxbAj
Bottle Openers: amzn.to/3i1xsoS
Dusting Spray: amzn.to/3znltIM
Rubbing Alcohol: amzn.to/3Bv3OQb
Q-tips: amzn.to/3BihFZK
💡 Lightbox : amzn.to/31h1GLC
Corel Draw Software: amzn.to/3pG3wzW
Sandpaper Blocks: amzn.to/3pVQVrV
Clear Coat: amzn.to/2LOM3qr
🖨️ Our favorite label printer the Rollo: amzn.to/2IVCVyV
🏷️ Flat 4x6 labels compatible with the Rollo printer: amzn.to/3pMawvO
📸 Camera: amzn.to/3iuYsLE
🔺 Tripod: amzn.to/2QgipJM
Scale: amzn.to/37IE2L7
Don't forget to LIKE, COMMENT & SUBSCRIBE!
Click that 🔔 to be notified when our next video comes out!
Drop us a line ...
Laser Engraving with Matt
PO Box 9
Carver, MN 55315
Send Business Inquiries to: homesteadingyt@gmail.com
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! Thank you for supporting us so we can continue to provide you with free content each week!
Music: Courtesy of Epidemic Sound
#laserengravingbusiness #laserengraving #laserengravingforbeginners
I just bought this machine due to your video. I work in an oil refinery and wasn’t sure if this is something I can do, but your video has given me the confidence to take a chance.
You will love it.
Just the video I've been looking for as I research and learn more about getting into embroidery! :)
😃
Great video! Defiantly saving this for when we get ours. Only part I will have an issue with is the color selection since I have a hard time seeing them. Angie said she will do that part lol.
Thanks 😊 😆 yes she will have to definitely help you on the colors.
Love your videos. I just got mine delivered last week and have been having so much fun with it!!
Congratulations 🎉 you will love it
Another excellent video with a lot of good information. I absolutely love my mighty hoops. And the hooping station is a game changer. Thanks for sharing.
Thanks 😊
Can't thank you enough for your help brother, love your content thanks for what you do!
Thanks 😃
thanks for your tips on this embroidery machine big guy, been thinking about getting one
👍😃
Good news! You're not going to have much competition because all of the commercial models are sold out. I'd thought about purchasing one of these machines to make patches for motorcycle jackets.
😅 Dude, your thumbnail made me want to click instantly. GREAT video!!!!
😃 thanks
I haven’t done any appliqués yet but I was thinking I’d try to use the uv to precut the shapes so I wouldn’t have to try and cut with scissors. Appreciate the video!
😆 great minds think alike. I was gonna cut it all out in the laser first.
My 1201 came with the curved scissors. It also came with a bobbin spool machine. I haven't used that yet.
Yes same.
@@laserengravingwithmatt is that cutaway or tear away stabilizer?
Cut
The link is in the description
Matt i love your videos! Just got my machine last week. Love it so far. Where did you buy the different needle plate you showed? Thanks!
It comes with it. It is in the tool box.
great tips...thanks
😃
I wish I saw this before using the machine 😢
Tension has been off and I have been messing with the knobs. Gonna try that three clicks down and restore the knob strength and see how it goes later.
Do you use the table at all? Noticing you can't using if intending on using the hats.
I have not used the table yet. You are right it can’t be on when doing hats.
I noticed the digitizer is no longer listed. Is he no longer accepting new clients?
I’m in search of a new one and when I find one, I’ll put it in the description for you
Could you do a breakdown of how much you have made so far and how much do you charge so people can understand that a good way of doing a price sheet thank you
Yup that’s the plan
@@laserengravingwithmatt something that I did not say is that I have true palsy and I’m legally blind. I would like to speak to you to see if we could help me with my business.
There is a link to my Patreon below each video. You can sign up there when you get one hour with me.
What's the sewing field that you are buying for your mighty hoops?
I use the 5.5 and I haven’t needed to go over the 3.5 size yet
Matt have you looked at Ink stitch for digitizing software? It has a learning curve but it allows you to modify the stitch direction.
Yes I have tried every free 30 day program and I got hatch.
Would you say the parts used in this machine are universal?
I don’t know if haven’t had to replace any
Did you know you can use your laser for applique? It will save you lots of time 👌🏼🙏🏼🌟👍🏼
Yup working on the video right now 😃
Where do you get your spools???
It’s linked in the description
@@laserengravingwithmatt thank you so much
How big can you embroider with this machine?!
I think 24”. I need to measure it
@@laserengravingwithmatt ooh ok there's another video, the guy said 13x19 I was like that not what I saw!! That's why I ask!
Awesome video as always Matt! Do you have a link to order your embroidery items? I would like to check out the quality of the Smartstich made hats before ordering the machine and going down another rabbit hole, lol.
Thanks. I will put some hats in the Etsy shop linked below.
Hello Matt, When you use Transfer Tape on laser engravings, do you wash the wood in the sink afterwards? Or add varnish? Or nothing? When i´m washing the wood in the sink, I feel that much of the color disappears and the wood warps?
And how do you handle the wood if you don't use Transfer Tape? (I make wood designs about 40x40cm in size, single layer)
Oh no never put the wood in the sink. If I use transfer tape, I don’t need to wipe it down. I might have to sand an edge or two a little bit with a piece of sandpaper, but because of the transfer tape, it never has burn marks. Some projects I don’t do anything with it and I’ll leave it as is some I have to clearcoat and some I paint or varnish.
Thanks alot! :) Just a last thing, do u know if i can use Self-adhesive PVC foil instead of Transfer Tape? (otherwise I will order some transfer tape)
NO never use PVC it will destroy your machine.
@@laserengravingwithmatt thanks! :))
Good Evening!
I've been looking at the Smart stitch for awhile now. Would you have the availability for a quick conversation?
Send me a email
@@laserengravingwithmatt
Good evening!
Thank you for taking the time to educate me!
I’ve been using lasers and cnc router (4 lasers and a onefinity router)for a few years now, and we are currently looking into embroidery as we get closer to retirement. My question concerns software and what is best for SmartStitch machines. Do you have someone digitize for you or do you use a program that creates the proper file type?
We purchased a old used baby lock to learn on(mistake) and are eager to take the next step.
Regards,
Barry
@BarryKillian-jj2nh I use hatch for names and such but I have someone do most of my digitizing.
Matt, where did you get the magnetic hoops?
Through Smart stitch website
Morning, Matt! You mentioned that the embroidery is now 1/2 the business. From a business standpoint, how did you market that new segment? The ramp up seems to have been pretty swift. How has that changed your turn around on the laser side customers?
Waiting for this answer lol
Well 😄 nothing it is all by the word of mouth. Now that people are coming into the shop to pick their stuff up. They are seeing that machine working and I get more orders that way I have not put anything online whatsoever and it is steady busy. I told Sara we would need two more machines before we post anything online.
@@laserengravingwithmatt thanks for the update!
@@laserengravingwithmatt Companies purchase lots of apparel with logos. There are businesses in NYC dedicated to just doing embroidery.