Do not use a pry bar to remove the side bolsters! There is a bolt (#10) that fixes the lower notch/tab of the bolsters to the chassis. You may need to remove the bottom seat cushion to see it. Remove that bolt and push in the bolsters and slide up.
Appreciate this bro, was so confused how the kid removed his and I followed your comment during my seat delete on my Accord, wasn't as hard as I thought even if it was a weird design choice
This is very helpful because I'm trying to install seat covers on my Honda Accord 04, but I realized I have to remove the back seat in order to do that Lol Thanks for the video!
I just did this. Broke the side covers. You can just slide the bottom out. Remove one bolt near the double seat buckle clips, remove side panel bolts, and then back seat bolts. That way you don’t break your side panels.
3:46 Thanks for helping me figure out how to remove the bottom. My bf did something yesterday that required taking the seat out and didn’t check that the seat belt clip wasn’t underneath 😅 He’s at work & not answering the phone so I came to RUclips lol
Have an 05 Honda Accord and I love it. I just acquired it and this is the second video I watched and you are awesome my friend. You are just to the point and you show everything just like a mechanic. Thank you
Very helpful videos. Just one comment, the two sides of the seat are not to be pried out. Just tried yesterday, remove the bolt at the bottom and then push the whole thing upwards, it will slide upwards.
Nice job son. Kudos. This is wonderful you're learning how to work with your hands at such a young age. Kudos again. You appear to be a good, clean kid and I like that. Wish the world was filled with good kids like you.
Thank you & thanks for the suggestion on how to improve my presentation. I will be sure to use the driver and passenger side as opposed to left and right...Thanks for watching and taking the time to write a comment...
technically right and left, refer to driver sitting in the car,his left and right is the considered as car's left and right,which is the correct way driver side and passenger side is confusing,when you order the parts,since a lot of countries driver side is opposite of ours, but left or right is the same no matter what side the driver is sitting
@@ahoorakia That's not a bad point. As long as the precedent is set at the beginng it wouldn't be a problem. I just know the right and left confuses a lot of people. But very fair point good sir.
Me too. Cant decide how to proceed. Remove the backrest? Or the bench portion of the rear seats? That is my question. I was wondering if i could get the bottom part out, without first removing the backrest portion. I think if the bench part was removed, the backrest portion would fold flatter.
@@mariajanedoehn9295 I did remove the bottom bench, only one bolt. Now it lays flat. My feet are in the trunk. Its a fine little bed, quite comfortable, and i am in my 60's!
LaughingblueSu how did your bed modification turn out? I’m trying to do the same thing with my accord. I’d love some tips from you, since you’ve done it already? Maybe a video or a FaceTime
Thanks so much Kiddo!❣️if is wasn’t for your instructed ( great job btw ) video & taking the time to make it and post it..... things would’ve been uuugly😂... So double, triple thanks!!!
First consult online forums to ensure that everything is right, and check out what the proper procedure is first, but the general process should be similar!
@@LaughingblueSu I'm not sure if they sorted out the auto transmission problems in 04... I have a 2007 3.0 6-speed manual. fantastic car. dead reliable but I'm looking to upgrade to something nicer to commute in. I'll be sad af when I sell this car I know it.
Sand under the seat like that is probably the result of receding flood water inside the vehicle. Your owner's title should have described 'flood vehicle' at purchase, and is useful to negotiate a lower price. Be aware of potential electrical problems due to saltwater. My flood car eventually suffered corrosion through-rust on the power steering tubing underneath the engine. I still don't regret the vehicle. Still my fave to drive. Thanks for the video. :)
I’m 100% mines is a flood the whole interior just looked like it was soaking . It literally only needed this big main fuse and new ground to engine,battery and frame . Took me forever to figure out because it would intermittently have zero electric. But for 800$ been driving it for 3 years its 2003 Honda A 124k miles it’s just ugly but has given me least problems out of all my cars
Somehow I can't find the lever in my 2004 Accord. Been trying to fold rear seats to install isofix bracket as my seats do not come with it. Any idea? Maybe hidden underneath the inner covers?
Could the lever been broken? It would be very strange for the lever not to be visible. It could possibly be hidden under the cover especially is the previous owner re-upholster the car with new fabric or covers.
@@EyeOnAiman thanks for the reply man. I think it would be broken or hidden during previous installation of car film tints as they had to remove the whole seat and covers to install in to the rear windshield.... Now I have to figure out how to remove the seat without the lever... Sigh... Any idea how?
I couldn't find that 10mm holding the bottom down! Doesn't help that there are ANTS living under the seat trying to bite at me as I search around... 05 Accord EX sitting for a couple years, had water leaking into the trunk and ants living in everything. Luckily they've isolated themselves to the rear seat now and the water leak was fixed.
@@dancearoundtheworld5360 Nah it was stuck in the yard of a family member and the ants made their way into it lol. It was also parked under a pine tree so it's covered in sap, so that's fun... I got it up and running now, and I cleaned out the ants and all the mold, replaced the trunk seal. All good now, fuck those ants. Now they actually made their way into my truck 😂
Hi I'm gonna tell you how to break your side panel seats then point out all the seat belt bolts which could stay in and then 10 minutes later I'll point to THE TWO LEVERS IN FRONT OF THE SEAT and the ONE 10Mil bolt which all u have to remove. Here's a free tip. Lead with the LEVERS and the 10 Mil and remove at least 74 of the Finnangles.
good video,so you decided to use the power tool with dead battery! and just pour some salt water and fish under the seat,and called natural aquarium!LOL
poor owner before you couldn't clean under the seat,because you hadn't make this video then!!,LOL just kidding and as for side part,you have to lift it all the way up before pulling out so you won't brake those little tabs,that secures it
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Legend has it if you look in the mirror and say "finagle" three times, Aiman appears to fix your vehicle.
"finaggle"
ftfy
Do not use a pry bar to remove the side bolsters! There is a bolt (#10) that fixes the lower notch/tab of the bolsters to the chassis. You may need to remove the bottom seat cushion to see it. Remove that bolt and push in the bolsters and slide up.
Terrible design by Honda, but this comment is truth.
Appreciate this bro, was so confused how the kid removed his and I followed your comment during my seat delete on my Accord, wasn't as hard as I thought even if it was a weird design choice
This is very helpful because I'm trying to install seat covers on my Honda Accord 04, but I realized I have to remove the back seat in order to do that Lol Thanks for the video!
Thank you! Glad the video helped you...
Smart for a 9 yr old boy
I just did this. Broke the side covers. You can just slide the bottom out. Remove one bolt near the double seat buckle clips, remove side panel bolts, and then back seat bolts. That way you don’t break your side panels.
Very helpful bro I’m tearing my car down to do a deep clean rn and this really helped
3:46 Thanks for helping me figure out how to remove the bottom. My bf did something yesterday that required taking the seat out and didn’t check that the seat belt clip wasn’t underneath 😅 He’s at work & not answering the phone so I came to RUclips lol
Have an 05 Honda Accord and I love it. I just acquired it and this is the second video I watched and you are awesome my friend. You are just to the point and you show everything just like a mechanic. Thank you
Very helpful videos. Just one comment, the two sides of the seat are not to be pried out. Just tried yesterday, remove the bolt at the bottom and then push the whole thing upwards, it will slide upwards.
Agreed. I broke mine trying to do that
@@jaredbjur Sorry this video caused you to break the plastic tab...
Thanks for correcting the procedure. Hopefully no one else broke the plastic tab.
My plastic tab broke too but thank you for the video
Nice job son. Kudos. This is wonderful you're learning how to work with your hands at such a young age. Kudos again. You appear to be a good, clean kid and I like that. Wish the world was filled with good kids like you.
Thank you very clear friend, greetings from Mexico
Great video man. Helps me not break anything else 😅
This helped greatly even for my 98
Great job for being so young! Tip: use unambiguous terms such as passenger and driver opposed to right and left. Again nice job
Thank you & thanks for the suggestion on how to improve my presentation. I will be sure to use the driver and passenger side as opposed to left and right...Thanks for watching and taking the time to write a comment...
technically right and left, refer to driver sitting in the car,his left and right is the considered as car's left and right,which is the correct way
driver side and passenger side is confusing,when you order the parts,since a lot of countries driver side is opposite of ours,
but left or right is the same no matter what side the driver is sitting
@@ahoorakia That's not a bad point. As long as the precedent is set at the beginng it wouldn't be a problem. I just know the right and left confuses a lot of people. But very fair point good sir.
@@short.version even when you order parts,it always says right or left,not driver /passenger side
@@ahoorakia you're not wrong.
Very helpful video thank man🎉
Thankful .have nice day.
Good job. Why did you do this? I'm trying to make a bed out of the back. That's how I ended up here.
Me too. Cant decide how to proceed. Remove the backrest?
Or the bench portion of the rear seats?
That is my question.
I was wondering if i could get the bottom part out, without first removing the backrest portion.
I think if the bench part was removed, the backrest portion would fold flatter.
How did you go about?
@@mariajanedoehn9295 I did remove the bottom bench, only one bolt.
Now it lays flat.
My feet are in the trunk.
Its a fine little bed, quite comfortable, and i am in my 60's!
@@LaughingblueSu enjoy"!
LaughingblueSu how did your bed modification turn out? I’m trying to do the same thing with my accord. I’d love some tips from you, since you’ve done it already? Maybe a video or a FaceTime
Thanks so much Kiddo!❣️if is wasn’t for your instructed ( great job btw ) video & taking the time to make it and post it..... things would’ve been uuugly😂...
So double, triple thanks!!!
Perfect video
Thanks man
You're welcome, thanks for watching...
Its great you are helping us....by tutorials....why dont you reassemble your car again???
really helpful. Thanks a lot.
Gracias me sirvió tu vídeo saludos dese Atlanta GA
Love this kid
I can't get those tabs on the bottom part of the seat to let go. I just want to clean under them. 2007 coupe. but they have the same tabs it seems.
Lift up push n lift up
Is this the same proces for a 2005 Accord coupe?
Thanks lil man much help!
You're welcome. Glad the video helped you & thanks for watching....
Awesome video. His voice matches his face real well.
i wondered if i could have storage under the back seat, for ratchet straps of course
Cool video dude! I bet the concept will work for a 2007 Civic. Any ideas or hints for that?
First consult online forums to ensure that everything is right, and check out what the proper procedure is first, but the general process should be similar!
THANK YOU
I have the 3.0L v6 model. You should do a how to remove the two front seats since they are electronic and what not.
Thanks for taking the time to write the comment. Hopefully the recommendation is helpful to other viewers...
I just bought a 04, v6, automatic, 135k miles.
I pick it up tomorrow, I hope I did the right thing. Has your Accord been dependable?
@@LaughingblueSu I'm not sure if they sorted out the auto transmission problems in 04... I have a 2007 3.0 6-speed manual. fantastic car. dead reliable but I'm looking to upgrade to something nicer to commute in. I'll be sad af when I sell this car I know it.
@@Corkoth55 what do you mean nicer to commute in? My 05 is cushy comfortable. Do you mean you want an automatic?
Greaat video! keep it up! can I replace the mechanical seats of a 2004 Honda Accord with power leather seats from a 2007 Accord...?
Yes but you will have to run your own wiring for the powered seats but other than that direct bolt in
Can you show how to fix recline on driver seat. The motor works?
I wanna swap my seats out for leather powered. Ones. Is it difficult
Love this kid!
Thank you!
Sand under the seat like that is probably the result of receding flood water inside the vehicle. Your owner's title should have described 'flood vehicle' at purchase, and is useful to negotiate a lower price. Be aware of potential electrical problems due to saltwater.
My flood car eventually suffered corrosion through-rust on the power steering tubing underneath the engine. I still don't regret the vehicle. Still my fave to drive. Thanks for the video. :)
Flood was my thought too.
Best case scenario, someone let their kid carry home a bucket of sand and shells, and it spilled.
I’m 100% mines is a flood the whole interior just looked like it was soaking . It literally only needed this big main fuse and new ground to engine,battery and frame . Took me forever to figure out because it would intermittently have zero electric. But for 800$ been driving it for 3 years its 2003 Honda A 124k miles it’s just ugly but has given me least problems out of all my cars
Does anyone know how to do it on a coupe or know where a video is
Somehow I can't find the lever in my 2004 Accord. Been trying to fold rear seats to install isofix bracket as my seats do not come with it. Any idea? Maybe hidden underneath the inner covers?
Could the lever been broken? It would be very strange for the lever not to be visible. It could possibly be hidden under the cover especially is the previous owner re-upholster the car with new fabric or covers.
@@EyeOnAiman thanks for the reply man. I think it would be broken or hidden during previous installation of car film tints as they had to remove the whole seat and covers to install in to the rear windshield.... Now I have to figure out how to remove the seat without the lever... Sigh... Any idea how?
What’re you taking the seats out for? Is the car not running anymore or are you converting it or what? I’m loving the vids - thanks :)
No I am just learning myself.
Thanks
You finagled the shit out of that seat!
Dont show people the wrong way to do this DO NOT USE A PRY BAR THIS GUY DOES NOT KNOW HOW TO REMOVE A REAR SEAT
How is correct than
I couldn't find that 10mm holding the bottom down! Doesn't help that there are ANTS living under the seat trying to bite at me as I search around... 05 Accord EX sitting for a couple years, had water leaking into the trunk and ants living in everything. Luckily they've isolated themselves to the rear seat now and the water leak was fixed.
quit parking on there hills
@@dancearoundtheworld5360 Nah it was stuck in the yard of a family member and the ants made their way into it lol. It was also parked under a pine tree so it's covered in sap, so that's fun...
I got it up and running now, and I cleaned out the ants and all the mold, replaced the trunk seal. All good now, fuck those ants. Now they actually made their way into my truck 😂
I have a 89 accord and my seats don’t go down any idea on how to take them out without ripping them apart
1985 honda accord LX REMOVE REAR SEAT
You know how to take it out but do you know how to but it back🧐
Hi I'm gonna tell you how to break your side panel seats then point out all the seat belt bolts which could stay in and then 10 minutes later I'll point to THE TWO LEVERS IN FRONT OF THE SEAT and the ONE 10Mil bolt which all u have to remove. Here's a free tip. Lead with the LEVERS and the 10 Mil and remove at least 74 of the Finnangles.
good video,so you decided to use the power tool with dead battery!
and just pour some salt water and fish under the seat,and called natural aquarium!LOL
We gonna have to finagle that sand up my guy
literally no videos at all on the coupe just the shitass sedan
Seems like a nice kid....
seems until he finagles you
finagle
this dude mad me looking at what finagle means
poor owner before you couldn't clean under the seat,because you hadn't make this video then!!,LOL just kidding
and as for side part,you have to lift it all the way up before pulling out so you won't brake those little tabs,that secures it
so basically finagle it and its out.
Buena chino ctm
Gracias & de nada
Emphasis on the "nay": ruclips.net/video/E-QRMwa5nvc/видео.html
whats ur snap